HD+ Karte mit DBox2 und Multicam

[Helle85]

haste vll frequenz von dem sender?

[fire113]

Hatte mir neue Channels mit dem BouquetWizzard gesogen, mußte aber neue Image flashen und die alten Setings waren daher auch wech.
Teste mal --> Astra 19,2 E Frequenz 12246 V 27500.
Ansonsten BouquetWizzard und updaten via Web, brauchst den Punktsender mit 1830 bzw. auf der Frequenz 12246 V.

Good luck...fire113

haste vll frequenz von dem sender?

[Helle85]

Kann mir jemand sagen was mit "Port problem" genau gemeint ist?

Oscam spuckt das hier nämlich aus:

2010/03/15 12:05:23  31110 r03 kai type=d0, len=137, idx=10, cnt=1: written (678 ms)
2010/03/15 12:05:23  31110 r03 kai type=00, len=139, idx=11, cnt=1: written (273 ms)
2010/03/15 13:28:38  31104 s   client(2) connect from 192.168.2.106 (pid=10134, pipfd=34)
2010/03/15 13:28:38  31104 s   client(3) connect from 192.168.2.106 (pid=10135, pipfd=35)
2010/03/15 13:28:38  10134 c02 encrypted newcamd:34000-client 192.168.2.106 granted (steven, au=hd+)
2010/03/15 13:28:38  10134 c02 user steven authenticated successfully (using client 6D67)
2010/03/15 13:28:38  10134 c02 AU wont be used on this port -> disable AU
2010/03/15 13:28:38  10135 c03 encrypted newcamd:34001-client 192.168.2.106 granted (steven, au=hd+)
2010/03/15 13:28:38  10135 c03 user steven authenticated successfully (using client 6D67)
2010/03/15 13:28:38  10135 c03 AU wont be used on this port -> disable AU
2010/03/15 13:29:20  10134 c02 steven (1702&000000/007F/93:B571): not found (712 ms)
2010/03/15 13:30:04  10134 c02 Connection closed to client
2010/03/15 13:30:04  10134 c02 steven disconnected from 192.168.2.106
2010/03/15 13:30:04  10135 c03 Connection closed to client
2010/03/15 13:30:04  10135 c03 steven disconnected from 192.168.2.106
2010/03/15 13:33:34  31104 s   client(2) connect from 192.168.2.106 (pid=10429, pipfd=34)
2010/03/15 13:33:34  31104 s   client(3) connect from 192.168.2.106 (pid=10430, pipfd=35)
2010/03/15 13:33:34  10429 c02 encrypted newcamd:34000-client 192.168.2.106 granted (steven, au=hd+)
2010/03/15 13:33:34  10429 c02 user steven authenticated successfully (using client 6D67)
2010/03/15 13:33:34  10429 c02 AU wont be used on this port -> disable AU
2010/03/15 13:33:34  10430 c03 encrypted newcamd:34001-client 192.168.2.106 granted (steven, au=hd+)
2010/03/15 13:33:34  10430 c03 user steven authenticated successfully (using client 6D67)
2010/03/15 13:33:34  10430 c03 AU wont be used on this port -> disable AU
2010/03/15 13:34:17  10429 c02 steven (1702&000000/007F/93:1592): not found (652 ms)
2010/03/15 13:34:22  10430 c03 steven (1801&000000/007F/89:DC26): not found (220 ms)
2010/03/15 13:34:25  10429 c02 steven (1702&000000/007F/93:402B): not found (682 ms)

Und das kommando "written" heist das ein AU gemacht wurde oder?