Kann mir mal einer bei der Fehlersuche helfen Schau nicht mehr durch
Server Fritz.box
ip:192.168.178.1
mpcs-config:
[global]
Nice = -1
ClientTimeout = 5
ClientMaxIdle = 120
CacheDelay = 0
BindWait = 60
ResolveDelay = 30
LogFile = /dev/null
Sleep = 0
#ServerIP = 192.168.178.1
Locals = 17220000
IgnoreList = /var/keys/ignore.list
[monitor]
Port = 8000
NoCrypt = 127.1.1.1
NoCrypt = 10.0.0.0-10.255.255.255
NoCrypt = 172.16.0.0-172.31.255.255
NoCrypt = 192.168.0.0-192.168.255.255
AULow = 120
MonLevel = 4
[newcamd]
Port = 15000@1722:FFFFF;15001@1834:FFFFF
Key = 0102030405060708091011121314
mpcs-reader
[reader]
Label = multicam
Protocol = mouse
Device = /dev/ttsUSB0
EMMCache = 1,3,2
CAID = 1702,1833
Group = 1
Detect = CTS #habe eine smartmouse USB/Serial
mpcs-User
[account]
User = dummy
Pwd = dummy
Group = 1
1801to1702 = 1
AU = multicam
MonLevel = 4
mbox-config
//mbox.cfg EXPLANATION and EXAMPLES
A: { 0 } // for QBoxHD receivers or for any receivers if needed it
//A: { x }
//Choose adapter path
//x=0 -> /dev/dvb/adapter0/
//x=1 -> /dev/dvb/adapter1/
//x=2 -> /dev/dvb/adapter2/
//x=.. -> .......
//default x=0
/************************************************** ************************************************** ********************/
D: { 4 }
//D: { x }
//x=0 -> disable
//x=1 -> enable dbox2 cw writing
//x=2 -> enable STAPI for IPBOX
//x=3 -> enable STAPI for Kathrein
//x=4 -> enable Linux DVB API for Kathrein
//x=5 -> enable triple dragon
//x=6 -> enable Qbox HD
//x=7 -> enable STAPI for Kathrein ufs922 -> dont work CSA decoding :(
//default disabled
/************************************************** ************************************************** ********************/
B: { 0 0 0 }
//B: { 1 127.0.0.1 127.0.0.1 } // for local watching over DVB
//B: { x IP_listen IP_send }
//x=0 -> disable local UDP ports 8004-80xx ,this ports are used with DVB cards and gbox plugin (Windows and Linux)
//x=1 -> enable
//IP_listen -> on what IP to wait for PMT and ECMs
//IP_send -> on what IP to send DCW
//default disabled
/************************************************** ************************************************** ********************/
Z: { 12 01 } { 127.0.0.1 8000 }
// Z option -> control sending/writing current informations
// Z: { xy 0z } { IP port }
// x=0 -> don't print time stamp (in console screen and in debug file)
// x=1 -> print time stamp ( .... )
// y=0 -> no writing/sending informations to debug file/destination IP
// y=1 -> send informations to destination IP but not in debug file
// y=2 -> write informations to debug file but don't send to destination IP
// y=3 -> write/send informations to debug file/destination IP
// z=0 -> dont write debug text in console window
// z=1 -> write debug text in console windows
// IP port -> destination IP and UDP port where to send informations
// no default
/************************************************** ************************************************** ********************/
#C: { 127.0.0.1 7999 }
// C option -> control receiving some command messages localy or from another IP
// C: { IP port }
// IP-> your local IP or you DNS
// port -> on what port you will be waiting command messages
// no default
/************************************************** ************************************************** ********************/
U: { 1 }
// U options -> Update peer(s) IP if it changes while peer still resending ecm's/cw etc.. information
// default only on hello message peer(s) IP are updated !!!
// U: { x }
// x=0 -> disabled
// x=1 -> enabled
// default disabled
/************************************************** ************************************************** ********************/
L: { 1 }
// L option -> how mbox to menage virtual card(s) with level 0
// ( only for peer(s) who have and can reshare virtual cards but don't want to use LEVEL 0 card(s) for them self)
// L: { x }
// x=0 -> don't load any virtual cards with LEVEL 0, you can't use them for your self
// x=1 -> load all virtual cards with LEVEL 0 ,you will be using them for your self
// default 1
/************************************************** ************************************************** ********************/
#G: { /hdd/ }
//G option -> redirect writing ONLY debug.txt file to internal or external HDD in receivers or for any other reason.
//Remove #, ONLY if you want to use this option !!!!!!!
/************************************************** ************************************************** ********************/
T: { /tmp/ }
// T option -> where to store temp files ... (share.info,debug.txt ,etc.)
// T: { folder_path_to_files, example: T: { /tmp/ } }
/************************************************** ************************************************** ********************/
K: { /var/media/ftp/uStor01/cs/mbox/ }
// K option -> where is cwshare.cfg,mbox.prio file
// K: { folder_path_to_files, example: K: { /var/keys/ } }
/************************************************** ************************************************** ********************/
M: { 1 }
// M option -> Mode option
// M: { x }
// x=0 -> local mode no NET
// x=1 -> NET mode
// default 0
/************************************************** ************************************************** ********************/
P: { 2/tmp/camd.socket }
// P option -> PMT location (Dont used with linux and windows)
// you must be tuned to channel so image can generate this file
// { /tmp/pmt.tmp } for receivers and images that create this file <- use this if you can
// { /tmp/pmtX.tmp } X-> number -> pmt1.tmp ......
// { 1/tmp/camd.socket } for enigma 1
// { 2/tmp/camd.socket } for enigma 2
/************************************************** ************************************************** ********************/
W: { 0 }
// W option -> write raw ECM to ecm.raw file
// W: { x }
// x=0 -> disabled
// x=1 -> enabled
// default disabled
/************************************************** ************************************************** ********************/
Q: { 30 }
//Q option -> newcamd connect retry in sec.
//Q: { x }
// default 300 sec.
/************************************************** ************************************************** ********************/
F: { 500 }
//F option -> reset writing debug.txt from begining if file size is higher then (x)(KB)
//F { x } -> decimal in KBytes
//default 500 KB
/************************************************** ************************************************** ********************/
//V: { card_type | device number | clock | inverse_Reset | inverse_CD_Line | detect card over CTS | DM800/8000 | dbox }
#V: { 3 1 3571200 0 0 0 0 0 } // external reader example -> Seca card, com1 port, clock 3.57 Mhz,
#V: { 3 2 3571200 1 0 0 0 0 }
#V: { 3 3 1 0 0 0 0 0 } // dreambox example -> Seca card,sci0 slot,3.33 Mhz
// [card_type]:
// Seca 3
// Irdeto 4
// Conax 5
// Cryptoworks 6
// Viaccess 7
// NDS 8
// Nagravision 9
// [device number]:
// COM1/ttyS0 1
// COM2/ttyS1 2
// /dev/sci0 3
// /dev/sci1 4
// /dev/usb/tts/0 5
// /dev/usb/tts/1 6
// /dev/tts/0 7
// /dev/tts/1 8
// /dev/ttyUSB0 9
// /dev/ttyUSB1 10
// /dev/scard0 11 //azbox
// /dev/scard1 12 //azbox
//[clocks]
//for COM ports and external card readers in Hz!!!
//for SCI DreamBox slots use this values
// 1 - 3.33 Mhz
// 2 - 3.63 Mhz
// 3 - 4 Mhz
// 4 - 4.44 Mhz
// 5 - 5Mhz
// 6 - 5.71 Mhz
// 7 - 6.66 Mhz
// 8 - 8 Mhz
//[Inverse Reset]
// 1 -yes
// 0 -no
//for GPIO
//2-gpio1
//3-gpio2
//4-gpio3
//5-gpio4
//6-gpio5
//7-gpio6
//8-gpio7
//[Inverse CD Line Detection]
//1 - yes
//0 - no
//[Detect card over CTS signal]
//1 - yes
//0 - no
//[DM800/8000 box]
//1 - yes
//0 - no
//[dbox serial/multicam]
//1 - yes
//0 - no
/************************************************** ************************************************** ********************/
#J: { 1 }
// J option -> enable adding betacrypt header to N3 ECM for Premier
// J { x }
// x = 0 -> disabled
// x = 1 -> enabled
/************************************************** ************************************************** ********************/
#S: { COM1 115200 }
//S option -> enable sssp protocol
//S: { x baud }
//x=COM1
//x=COM2
//x=/dev/ttyS0
//x=/dev/ttyS1
//x= serial device ...
//valids baud -> 115200,57600,38400,19200,9600
/************************************************** ************************************************** ********************/
mbox-cwshare
M: { 192.168.178.1 { FA1BC9F9 }}
O: { 2000 2000 }
D: { 192.168.178.3 { 8006 7005 { FA5BDEFE { A3 A3 }}}}
C: { 127.0.0.1 15000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 } { 10 } { 1702FFFF:17020000 }
C: { 127.0.0.1 15001 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 } { 10 } { 1833FFFF:18330000 }
Die beiden Server starten!!!
Client Kathi 910
ip:192.168.178.3
mbox-config
//mbox.cfg EXPLANATION and EXAMPLES
A: { 0 } // for QBoxHD receivers or for any receivers if needed it
//A: { x }
//Choose adapter path
//x=0 -> /dev/dvb/adapter0/
//x=1 -> /dev/dvb/adapter1/
//x=2 -> /dev/dvb/adapter2/
//x=.. -> .......
//default x=0
/************************************************** ************************************************** ********************/
D: { 0 }
//D: { x }
//x=0 -> disable
//x=1 -> enable dbox2 cw writing
//x=2 -> enable STAPI for IPBOX
//x=3 -> enable STAPI for Kathrein
//x=4 -> enable Linux DVB API for Kathrein
//x=5 -> enable triple dragon
//x=6 -> enable Qbox HD
//x=7 -> enable STAPI for Kathrein ufs922 -> dont work CSA decoding :(
//default disabled
/************************************************** ************************************************** ********************/
B: { 0 0 0 }
//B: { 1 127.0.0.1 127.0.0.1 } // for local watching over DVB
//B: { x IP_listen IP_send }
//x=0 -> disable local UDP ports 8004-80xx ,this ports are used with DVB cards and gbox plugin (Windows and Linux)
//x=1 -> enable
//IP_listen -> on what IP to wait for PMT and ECMs
//IP_send -> on what IP to send DCW
//default disabled
/************************************************** ************************************************** ********************/
Z: { 12 01 } { 127.0.0.1 8000 }
// Z option -> control sending/writing current informations
// Z: { xy 0z } { IP port }
// x=0 -> don't print time stamp (in console screen and in debug file)
// x=1 -> print time stamp ( .... )
// y=0 -> no writing/sending informations to debug file/destination IP
// y=1 -> send informations to destination IP but not in debug file
// y=2 -> write informations to debug file but don't send to destination IP
// y=3 -> write/send informations to debug file/destination IP
// z=0 -> dont write debug text in console window
// z=1 -> write debug text in console windows
// IP port -> destination IP and UDP port where to send informations
// no default
/************************************************** ************************************************** ********************/
#C: { 127.0.0.1 7999 }
// C option -> control receiving some command messages localy or from another IP
// C: { IP port }
// IP-> your local IP or you DNS
// port -> on what port you will be waiting command messages
// no default
/************************************************** ************************************************** ********************/
U: { 1 }
// U options -> Update peer(s) IP if it changes while peer still resending ecm's/cw etc.. information
// default only on hello message peer(s) IP are updated !!!
// U: { x }
// x=0 -> disabled
// x=1 -> enabled
// default disabled
/************************************************** ************************************************** ********************/
L: { 1 }
// L option -> how mbox to menage virtual card(s) with level 0
// ( only for peer(s) who have and can reshare virtual cards but don't want to use LEVEL 0 card(s) for them self)
// L: { x }
// x=0 -> don't load any virtual cards with LEVEL 0, you can't use them for your self
// x=1 -> load all virtual cards with LEVEL 0 ,you will be using them for your self
// default 1
/************************************************** ************************************************** ********************/
#G: { /hdd/ }
//G option -> redirect writing ONLY debug.txt file to internal or external HDD in receivers or for any other reason.
//Remove #, ONLY if you want to use this option !!!!!!!
/************************************************** ************************************************** ********************/
T: { /tmp/ }
// T option -> where to store temp files ... (share.info,debug.txt ,etc.)
// T: { folder_path_to_files, example: T: { /tmp/ } }
/************************************************** ************************************************** ********************/
K: { /var/keys/ }
// K option -> where is cwshare.cfg,mbox.prio file
// K: { folder_path_to_files, example: K: { /var/keys/ } }
/************************************************** ************************************************** ********************/
M: { 1 }
// M option -> Mode option
// M: { x }
// x=0 -> local mode no NET
// x=1 -> NET mode
// default 0
/************************************************** ************************************************** ********************/
P: { 2/tmp/camd.socket }
// P option -> PMT location (Dont used with linux and windows)
// you must be tuned to channel so image can generate this file
// { /tmp/pmt.tmp } for receivers and images that create this file <- use this if you can
// { /tmp/pmtX.tmp } X-> number -> pmt1.tmp ......
// { 1/tmp/camd.socket } for enigma 1
// { 2/tmp/camd.socket } for enigma 2
/************************************************** ************************************************** ********************/
W: { 0 }
// W option -> write raw ECM to ecm.raw file
// W: { x }
// x=0 -> disabled
// x=1 -> enabled
// default disabled
/************************************************** ************************************************** ********************/
Q: { 30 }
//Q option -> newcamd connect retry in sec.
//Q: { x }
// default 300 sec.
/************************************************** ************************************************** ********************/
F: { 500 }
//F option -> reset writing debug.txt from begining if file size is higher then (x)(KB)
//F { x } -> decimal in KBytes
//default 500 KB
/************************************************** ************************************************** ********************/
//V: { card_type | device number | clock | inverse_Reset | inverse_CD_Line | detect card over CTS | DM800/8000 | dbox }
#V: { 3 1 3571200 0 0 0 0 0 } // external reader example -> Seca card, com1 port, clock 3.57 Mhz,
#V: { 3 2 3571200 1 0 0 0 0 }
#V: { 3 3 1 0 0 0 0 0 } // dreambox example -> Seca card,sci0 slot,3.33 Mhz
// [card_type]:
// Seca 3
// Irdeto 4
// Conax 5
// Cryptoworks 6
// Viaccess 7
// NDS 8
// Nagravision 9
// [device number]:
// COM1/ttyS0 1
// COM2/ttyS1 2
// /dev/sci0 3
// /dev/sci1 4
// /dev/usb/tts/0 5
// /dev/usb/tts/1 6
// /dev/tts/0 7
// /dev/tts/1 8
// /dev/ttyUSB0 9
// /dev/ttyUSB1 10
// /dev/scard0 11 //azbox
// /dev/scard1 12 //azbox
//[clocks]
//for COM ports and external card readers in Hz!!!
//for SCI DreamBox slots use this values
// 1 - 3.33 Mhz
// 2 - 3.63 Mhz
// 3 - 4 Mhz
// 4 - 4.44 Mhz
// 5 - 5Mhz
// 6 - 5.71 Mhz
// 7 - 6.66 Mhz
// 8 - 8 Mhz
//[Inverse Reset]
// 1 -yes
// 0 -no
//for GPIO
//2-gpio1
//3-gpio2
//4-gpio3
//5-gpio4
//6-gpio5
//7-gpio6
//8-gpio7
//[Inverse CD Line Detection]
//1 - yes
//0 - no
//[Detect card over CTS signal]
//1 - yes
//0 - no
//[DM800/8000 box]
//1 - yes
//0 - no
//[dbox serial/multicam]
//1 - yes
//0 - no
/************************************************** ************************************************** ********************/
#J: { 1 }
// J option -> enable adding betacrypt header to N3 ECM for Premier
// J { x }
// x = 0 -> disabled
// x = 1 -> enabled
/************************************************** ************************************************** ********************/
#S: { COM1 115200 }
//S option -> enable sssp protocol
//S: { x baud }
//x=COM1
//x=COM2
//x=/dev/ttyS0
//x=/dev/ttyS1
//x= serial device ...
//valids baud -> 115200,57600,38400,19200,9600
/************************************************** ************************************************** ********************/
mbox-cwshare
I: { 04 }
X: { 05 }
O: { 2000 2000 }
N: { 00 01 03 1F 3000 5000 }
M: { 192.168.178.3 { FA5BDEFE }}
D: { 192.168.178.1 { 7005 8006 { FA1BC9F9 { A3 A3 }}}}
{ 0000 } { 0 } send filter
{ 0000 } { 0 } receive filter
Hier die fehlermeldung von der mbox auf der Kathi:
AAF-KATHI:~# mbox /var/keys/mbox.cfg
[10:48:56] Checking for priority file ... no priority file.
AAF-KATHI:~# [10:48:56] ExYuSAT Team http://www.exyusat.com , http://mbox.exyusat.com/index.php
[10:48:56] Starting MBOX version 0.6 BETA (build 0010) coded by The_Ripper
[10:48:56] This program is for educational & informational purposes only!!
[10:48:56] Donation to project: http://mbox.exyusat.com/donate.htm
[10:48:56] [ Box ] Kathrein (ST) HD Box
[10:48:56] ===> Net Mode <===
[10:48:56] Opened 'ca' device ...
[10:48:56] Opened 'demux' device ...
[10:48:56] Reading cwshare.cfg ...
[10:48:56] Trying to get online,please wait ...
[10:48:56] No M and G or C line in cwshare.cfg file !!!!
[10:48:56] Exiting ...
Versteh ich nicht steht doch alles drin oder wo ist der fehler?
mfg.
Bretterknaller
, jetzt mal noch die Clients einrichten und hoffen das es klappt ;o)