Sind denn alle HD Kanäle Netzwerk verfügbar ,hat Du es lokal ?
Sind denn alle HD Kanäle Netzwerk verfügbar ,hat Du es lokal ?
Beziehe alle HD-Kanäle aus dem Netzwerk, keine lokale Karte.
Funkschlumf
Dann geh ich davon aus ,das es im Netzwerk nicht sauber zur Verfügung gestellt wird,frag doch mal andere Peers ,ob sie alles haben. Wenn Du die Mbox online installierst ,genügt es die cwshare.cfg zu konfigurieren,damit Du als Client alles aus dem Netzwerk empfangen kannst.
Die ersten 3 HD-Kanäle sind von meinem Hauptprovider und sind bei ihm Betacrypt getunnelt auf Caid 1702, die letzten 4 HD-Kanäle stehen nur sporadisch zur Verfügung, von anderen Providern im share, und haben Caid 1833.
Daher stammen wohl die Probleme.
Funkschlumf
können denn andere Peers die Sender sehen ?
Wie ich schon anfangs sagte, wenn ich den Parameter "J" in der mbox.cfg auf "0" setze, kann ich die Kanäle mit Caid 1833 öffnen aber dann gehen die getunnelten Kanäle mit Caid1702 nicht mehr auf.
Funkschlumf
Lass mal die ganze mbox.cfg sehen.
Hier nun die cfg.//mbox.cfg EXPLANATION and EXAMPLES
//A: { 0 } // for QBoxHD receivers or for any receivers if needed it
//A: { x }
//Choose adapter path
//x=0 -> /dev/dvb/adapter0/
//x=1 -> /dev/dvb/adapter1/
//x=2 -> /dev/dvb/adapter2/
//x=.. -> .......
//default x=0
D: { 4 }
//D: { x }
//x=0 -> disable
//x=1 -> enable dbox2 cw writing
//x=2 -> enable STAPI for IPBOX
//x=3 -> enable STAPI for Kathrein
//x=4 -> enable Linux DVB API for Kathrein
//x=5 -> enable triple dragon
//x=6 -> enable Qbox HD
//default disabled
B: { 0 }
//B: { x }
//x=0 -> disable local UDP ports 8004-80xx ,this ports are used with DVB cards and gbox plugin (Windows and Linux)
//x=1 -> enable
//default disabled
Z: { 12 } { 127.0.0.1 8000 }
// Z option -> control sending/writing current informations
// Z: { xy } { IP port }
// x=0 -> don't print time stamp (in console screen and in debug file)
// x=1 -> print time stamp ( .... )
// y=0 -> no writing/sending informations to debug file/destination IP
// y=1 -> send informations to destination IP but not in debug file
// y=2 -> write informations to debug file but don't send to destination IP
// y=3 -> write/send informations to debug file/destination IP
// IP port -> destination IP and UDP port where to send informations
// no default
#C: { 127.0.0.1 7999 }
// C option -> control receiving some command messages localy or from another IP
// C: { IP port }
// IP-> your local IP or you DNS
// port -> on what port you will be waiting command messages
// no default
U: { 1 }
// U options -> Update peer(s) IP if it changes while peer still resending ecm's/cw etc.. information
// default only on hello message peer(s) IP are updated !!!
// U: { x }
// x=0 -> disabled
// x=1 -> enabled
// default disabled
L: { 1 }
// L option -> how mbox to menage virtual card(s) with level 0
// ( only for peer(s) who have and can reshare virtual cards but don't want to use LEVEL 0 card(s) for them self)
// L: { x }
// x=0 -> don't load any virtual cards with LEVEL 0, you can't use them for your self
// x=1 -> load all virtual cards with LEVEL 0 ,you will be using them for your self
// default 1
#G: { /hdd/ }
//G option -> redirect writing ONLY debug.txt file to internal or external HDD in receivers or for any other reason.
//Remove #, ONLY if you want to use this option !!!!!!!
T: { /tmp/ }
// T option -> where to store temp files ... (share.info,debug.txt ,etc.)
// T: { folder_path_to_files, example: T: { /tmp/ } }
K: { /var/keys/ }
// K option -> where is cwshare.cfg file
// K: { folder_path_to_files, example: K: { /var/keys/ } }
M: { 1 }
// M option -> Mode option
// M: { x }
// x=0 -> local mode no NET
// x=1 -> NET mode
// default 0
P: { 2/tmp/camd.socket }
// P option -> PMT location (Dont used with linux and windows)
// you must be tuned to channel so image can generate this file
// { /tmp/pmt.tmp } for receivers and images that create this file <- use this if you can
// { 1/tmp/camd.socket } for enigma 1
// { 2/tmp/camd.socket } for enigma 2
W: { 0 }
// W option -> write raw ECM to ecm.raw file
// W: { x }
// x=0 -> disabled
// x=1 -> enabled
// default disabled
Q: { 2 }
//Q option -> newcamd connect retry in sec.
//Q: { x }
// default 300 sec.
F: { 500 }
//F option -> reset writing debug.txt from begining if file size is higher then (x)(KB)
//F { x } -> decimal in KBytes
//default 500 KB
///DO NOT USE THIS ,NOT TESTED !!!!!!!!//
//V: { card_type device clock inverse_Reset}
#V: { 3 1 3571200 0 }
#V: { 3 2 3571200 1 }
// card_type:
// Seca 3 , Irdeto 4, Conax 5, Cryptoworks 6, Viaccess 7, NDS 8, Nagravision 9
// device:
// COM1/ttyS0 1
// COM2/ttyS1 2
// /dev/sci0 3
// /dev/sci1 4
// /dev/usb/tts/0 5
// /dev/usb/tts/1 6
// /dev/tts/0 7
// /dev/tts/1 8
// /dev/ttyUSB0 9
// /dev/ttyUSB1 10
//clocks for COM ports in Hz
//for SCI slots use this values
// 1 - 3.33 Mhz
// 2 - 3.63 Mhz
// 3 - 4 Mhz
// 4 - 4.44 Mhz
// 5 - 5Mhz
// 6 - 5.71 Mhz
// 7 - 6.66 Mhz
// 8 - 8 Mhz
//Inverse Reset
// 1 -yes
// 0 -no
///DO NOT USE THIS ,NOT TESTED !!!!!!!!//
J: { 1 }
// J option -> enable adding betacrypt header to N3 ECM for Premier
// J { x }
// x = 0 -> disabled
// x = 1 -> enabled
R: { 3600 }
// R option -> resend hello to all peers after X seconds, ony for gboxx peers,not mbox peers
//default in code 3600 seconds
H: { 0 0 1 0 0 0 }
// H option -> mapping provid (0-disabled, 1-enabled)
//H: { a b c d e f }
//a-> mapping all 0BXX to 0B00
//b-> mapping 1810 to 1801
//c-> mapping 1803 to 1801
//d-> mapping 1802 to 1801
//e-> mapping 1815 to 1801
//f-> mapping 1822 to 1801
//S: { COM1 }
//S option -> enable sssp protocol
//S: { x }
//x=COM1
//x=COM2
//x=/dev/ttyS0
//x=/dev/ttyS1
Hier mal meine von Clienten:
//mbox.cfg EXPLANATION and EXAMPLES
D: { 4 }
//D: { x }
//x=0 -> disable
//x=1 -> enable dbox2 cw writing
//x=2 -> enable STAPI for IPBOX
//x=3 -> enable STAPI for Kathrein
//x=4 -> enable Linux DVB API for Kathrein
//default disabled
B: { 0 }
//B: { x }
//x=0 -> disable local UDP ports 8004-80xx ,this ports are used with DVB cards and gbox plugin (Windows and Linux)
//x=1 -> enable
//default disabled
Z: { 13 } { 192.168.100.2 3254 }
// Z option -> control sending/writing current informations
// Z: { xy } { IP port }
// x=0 -> don't print time stamp (in console screen and in debug file)
// x=1 -> print time stamp ( .... )
// y=0 -> no writing/sending informations to debug file/destination IP
// y=1 -> send informations to destination IP but not in debug file
// y=2 -> write informations to debug file but don't send to destination IP
// y=3 -> write/send informations to debug file/destination IP
// IP port -> destination IP and UDP port where to send informations
// no default
#C: { 127.0.0.1 7999 }
// C option -> control receiving some command messages localy or from another IP
// C: { IP port }
// IP-> your local IP or you DNS
// port -> on what port you will be waiting command messages
// no default
U: { 1 }
// U options -> Update peer(s) IP if it changes while peer still resending ecm's/cw etc.. information
// default only on hello message peer(s) IP are updated !!!
// U: { x }
// x=0 -> disabled
// x=1 -> enabled
// default disabled
L: { 1 }
// L option -> how mbox to menage virtual card(s) with level 0
// ( only for peer(s) who have and can reshare virtual cards but don't want to use LEVEL 0 card(s) for them self)
// L: { x }
// x=0 -> don't load any virtual cards with LEVEL 0, you can't use them for your self
// x=1 -> load all virtual cards with LEVEL 0 ,you will be using them for your self
// default 1
#G: { /hdd/ }
//G option -> redirect writing ONLY debug.txt file to internal or external HDD in receivers or for any other reason.
//Remove #, ONLY if you want to use this option !!!!!!!
T: { /tmp/ }
// T option -> where to store temp files ... (share.info,debug.txt ,etc.)
// T: { folder_path_to_files, example: T: { /tmp/ } }
K: { /var/keys/ }
// K option -> where is cwshare.cfg file
// K: { folder_path_to_files, example: K: { /var/keys/ } }
E: { 1 }
// E option -> disable same cards from peers
// E: { x }
// x=0 -> use same cards(boxids) from peers
// x=1 -> don't use same cards(boxids) from peers
// default 1
M: { 1 }
// M option -> Mode option
// M: { x }
// x=0 -> local mode no NET
// x=1 -> NET mode
// default 0
P: { 2/tmp/camd.socket }
// P option -> PMT location (Dont used with linux and windows)
// you must be tuned to channel so image can generate this file
// { /tmp/pmt.tmp } for receivers and images that create this file <- use this if you can
// { 1/tmp/camd.socket } for enigma 1
// { 2/tmp/camd.socket } for enigma 2
W: { 0 }
// W option -> write raw ECM to ecm.raw file
// W: { x }
// x=0 -> disabled
// x=1 -> enabled
// default disabled
H: { 0 }
//H option -> C line priority over network cards
// H: { x }
// x=0 -> disabled -> newtwork cards and local cards has same priority
// x=1 -> enabled -> your local cards has priority, no network cards used
// default disabled
Q: { 300 }
//Q option -> newcamd connect retry in sec.
//Q: { x }
// default 300 sec.
F: { 500 }
//F option -> reset writing debug.txt from begining if file size is higher then (x)(KB)
//F { x } -> decimal in KBytes
//default 500 KB
OK, werde es mal damit probieren, melde mich wieder.
Funkschlumf
Hallo,
wieso finde ich die cwshare.cfg nicht über den ftp?
Habe ich evtl. etwas beim download falsch gemacht,
alle anderen dateien waren zum anpassen vorhanden..!?
Wegen den Lines zum forwarding stellen sich gewiss später noch
fragen aber alles zu seiner zeit.
Danke für Eure oder Deine Hilfe
"musicsnapper"
Gruss doubtfire
PS: Woran erkenne ich am besten ob das multicam funktioniert. wurde
mir als nicht funktionsgetestet verkauft, aber alle meldungen bisher bei
onlineupdates wurden erfolgreich durchgeführt?
D A N K E ! ! !
lade den Emu noch mal runter ,vergiss die "keys" nicht.
ich verstehe die welt nicht mehr, die grundlegendsten dinge klappen nicht mehr obwohl ich mich beim netzwerk rel. sicher bin. habe mir wegen der ewigen umsteckerei einen switch gekauft und das crossover mal beiseite gelegt. nun möchte ich den download der emus wiederholen und ich bekomme keine vernünfitge i-net verbindung mit der dbox hin....??? über den switch internet für den pc einwandfrei. bei der box der internet test mal alles erreichbar, mal nur glj.6x.to über ip dann mal nur über dns, dann mal beide nicht, dann mal der gateway nicht erreichbar... ich verzweifle, dabei kommt er manchmal bis kurz vor den download bricht aber dann ab.
Was könnte das bloß sein?
ach ja und wenn ich jetzt wieder direkt mit demselben kabel mit dem es vorher geklappt hat, an den router gehe klappt es auch nicht
mehr....?
ftp verbindung stellt er her, hat aber dann probleme files in das /tmp verzeichnes zu kopieren, dauert ewig und gibt dann noch ne fehlermeldung aus.
die beiden dinge noch als nachtrag.
Geändert von nodoubt69 (24.04.10 um 08:58 Uhr) Grund: Nachtrag
Prüfe ,ob IPs oder Macip´s im Netzwerk evtl doppelt vergeben sind.
Musicsnapper du bist echt geil und hast es drauf, auf so was muss man erstmal kommen!!!!!!
hatte im router fest zugeordnete mac's obwohl zu anderen Ips als ausgewählt für die dbox, trotzdem funzt der download wieder nach freigabe der festen mac zuweisung!!!!!!!!!!!!!!!!!!!!!!!!
jetzt erstmal weiter!!! hoffe muss mich nicht zu baldigst melden obwohl ich jetzt schon schisse vor den line zuweisungen habe, fühle mich da nicht so zu hause!