mit Hilfe von diesem super Forum hier habe ich es nach viel lesen geschaft das rudbox_beta1_image einzuspielen.
Läuft soweit auch ganz gut.
Nur am nächsten Tag (nach standby) leider nicht mehr.
Ich muß dann das Image neu aufspielen ums hell zu bekommen.
-was habe ich übersehen bzw mache ich falsch ?
schon jetzt danke für eure Hilfe
grüsse
Danke für die schnelle hilfe,
das hab ich gestern schon versucht, nützt leider nichts
-erst nach erneutem image aufspielen gehts wieder
und dann über nacht nichts mehr
grüsse
werde ich mal testen
-ist bei der 1W kathi ein neustart der emu per fernbedienung möglich ?
hm, wohl zu kompliziert für mich als anfänger
werde mal alles neu aufspielen (hab ich ja schon einpaar mal gemacht) und dann über nacht mal komplett auschalten, ist aber schon irgendwie eigenartig, hoffe nur das er keinen Hardware defekt hat , ist erst ein paar Tage alt.
grüsse
übrigens mit org. firmware war die box morgens an mit der rudbox ist sie im standby
Nach neu aufspielen des images und dem anderen dingen geht es nun auch nicht,
ich würde ja den fehler gerne bei mir finden aber es hat doch schon 3mal geklappt,
werde es wohl weiter probieren müssen
aufjedenfall schon mal vielen Dank
Hallo gandy,
nach mehrmaligen aufspielen ging es gestern abend perfekt
- heute nachdem die box richtig abgeschaltet war - wieder nichts
Ich kann die box ja nicht immer anlassen bzw das sollte wohl so nicht sein oder ?
grüsse
mir ist gerade noch im total commander aufgefallen alle dateien im Ordner K*y haben das datum 01.01.1980 bis auf priority.list
s_env_mac[10] = f
s_env_mac[11] = :
s_env_mac[12] = c
s_env_mac[13] = c
s_env_mac[14] = :
s_env_mac[15] = a
s_env_mac[16] = 4
get ether addr = 0, 50, fd, ff, cc, a4
mac hi address = a4cc, lowaddress = fffd5000
Lan_HandleSoftwareInterrupt
Please press Enter to activate this console. config/start.sh does not exist....
running /app/start.sh
stos_core: module license 'ST Microelectronics' taints kernel.
stos_core_init_module(): Initializing STOS Module
stcommon_core_init_module(): Initializing STCOMMON Module
Setting all Group priorities done
PTI Clock: Cut 3.0 detected -> setting PTI workaround clock.
TC_Ram test...
Writing...
Reading...
ok
Preproc Clock: Cut 3.0 detected -> setting Preproc clock.
mod_lxload_init: Initializing LXLOAD kernel Module, StartAddress: 0x04200000
Load module lxload[254] by insmod (pid 40)
LXLOADER virtual io kernel address of phys 0xa4200000 = 0xa4200000
loading audio binlxload_open: major=254 minor=0
setting up Audio LX in NON-DEBUG mode
ary file
lxload_release: major=254 minor=0
Starting Audio LX by disabling reset
LX loaded:
Base: 0xa4200000
Last: 0xa4347284
Size:1340036
mod_lxload_exit: Exiting LXLOAD kernel Module
The I/O memory region 0xa4200000 is released successfully
Unload module lxload by rmmod (pid 42)
mod_lxload_init: Initializing LXLOAD kernel Module, StartAddress: 0x04000000
Load module lxload[254] by insmod (pid 43)
LXLOADER virtual io kernel address of phys 0xa4000000 = 0xa4000000
lxload_open: major=254 minor=0
setting up LX in NON-DEBUG mode
lxload_release: major=254 minor=0
Starting video LX by disabling reset
LX loaded:
Base: 0xa4000000
Last: 0xa403cb00
Size:248576
mod_lxload_exit: Exiting LXLOAD kernel Module
The I/O memory region 0xa4000000 is released successfully
Unload module lxload by rmmod (pid 45)
stavmem_core_init_module: Initializing STAVMEM CORE Module
Info> Number Of Partitions = 2
Info> Maximum number of memory blocks = 450
Info> Partition used for virtual mapping by default is the partition 0
Info> Device 'AVMEM' initialised
Info> Partition created on device 'AVMEM'
Info> Partition created on device 'AVMEM'
STAVMEM initialized, revision=STAVMEM-REL_4.3.1
Partition 0 LMI_SYS Handle=0xc01907d8 Start 0xa6400000 Stop 0xa8000000
Partition 1 LMI_VID Handle=0xc01907ec Start 0xb0000000 Stop 0xb4000000
Initializing STAPIGAT kernel Module
Load module stapigat[254] by insmod (pid 47)
Load module fdma [253] by insmod (pid 49)
stpio_core_init_module(): Initializing STPIO Module
Load module stpti4_core by insmod (pid 54)
Load module stclkrv_core by insmod (pid 55)
hdmi_i2c_init : Initializing I2CHDMI kernel Module
stvid_core_init_module: Initializing STVID CORE Module
stvidtest_core_init_module: Initializing STVIDTEST CORE Module
Load module staudlx_core [251] by insmod (pid 74)
sthdmi_ioctl_init_module: Initializing STHDMI IOCTL Module
Load module sthdmi_ioctl[250] by insmod (pid 76)
stvid_ioctl_init_module: Initializing STVID IOCTL Module
Load module stvid_ioctl[249] by insmod (pid 77)
stvidtest_ioctl_init_module: Initializing STVIDTEST IOCTL Module
Load module stvidtest_ioctl[248] by insmod (pid 78)
Unload module stttx_core by insmod (pid 80)
Load module stevt_ioctl [247] by insmod (pid 81)
stblit_ioctl_init_module: Initializing STBLIT IOCTL Module
Load module stblit_ioctl[246] by insmod (pid 82)
stlayer_ioctl_init_module: Initializing STLAYER kernel Module
Load module stlayer_ioctl[245] by insmod (pid 83)
Load module stpti4_ioctl [244] by insmod (pid 84)
Load module stclkrv_ioctl [243] by insmod (pid 85)
stdenc_ioctl_init_module: Initializing STDENC IOCTL Module
Load module stdenc_ioctl[242] by insmod (pid 86)
stvtg_ioctl_init_module: Initializing STVTG IOCTL Module
Load module stvtg_ioctl[241] by insmod (pid 87)
stvout_ioctl_init_module: Initializing STVOUT IOCTL Module
Load module stvout_ioctl[240] by insmod (pid 88)
stvmix_ioctl_init_module: Initializing STVMIX IOCTL Module
Load module stvmix_ioctl[239] by insmod (pid 89)
stvbi_ioctl_init_module: Initializing STVBI kernel Module
Load module stvbi_ioctl[238] by insmod (pid 90)
Load module stmerge_ioctl [237] by insmod (pid 91)
Load module staudlx_ioctl[236] by insmod (pid 92)
stcc_ioctl_init_module: Initializing STCC IOCTL Module
Load module stcc_ioctl[235] by insmod (pid 93)
Load module stttx_ioctl [234] by insmod (pid 94)
Load module stinj_ioctl [233] by insmod (pid 96)
Load module stpio_ioctl [232] by insmod (pid 97)
the adapter name is number 0
the adapter name is number 1
<6>i2c_st40_pio: ST40 PIO based I2C Driver
i2c_st40_pio: allocated pin (4,0) for scl (0x846fba6c)
i2c_st40_pio: allocated pin (4,1) for sda (0x846fba7c)
i2c_st40_pio bus 0: SCL=PIO4[0], SDA=PIO4[1]
the adapter name is ST40 (PIO based) number 2
stpio_init
VFD_Driver Init
VFD_Controller Type : NEW Kathrein VFD
CIMAX DeviceInit
SysConf device Init
LMI_SYS VCR0 = 00d40000
LMI_SYS VCR1 = 0f041000
LMI_SYS MIM0 = 861a0247
LMI_SYS MIM1 = 01010022
LMI_SYS SCR = 00000000
LMI_SYS STR = 35b06455
LMI_SYS COC = 00000000
LMI_SYS SDRA0 = 08001900
LMI_SYS SDRA1 = 08001900
LMI_SYS CIC = 00000249
LMI_SYS SDMR0 = 00000000
LMI_SYS SDMR1 = 00000000
LMI_VID VCR0 = 00d40000
LMI_VID VCR1 = 17101000
LMI_VID MIM0 = 861a0247
LMI_VID MIM1 = 01010022
LMI_VID SCR = 00000000
LMI_VID STR = 35b06455
LMI_VID COC = 00000000
LMI_VID SDRA0 = 14001900
LMI_VID SDRA1 = 14001900
LMI_VID CIC = 00000249
LMI_VID SDMR0 = 00000000
LMI_VID SDMR1 = 00000000
EMI_BANK0_CFG0 = 001016d1
EMI_BANK0_CFG1 = 9d200000
EMI_BANK0_CFG2 = 9d220000
EMI_BANK0_CFG3 = 00000000
EMI_BANK1_CFG0 = 001016d1
EMI_BANK1_CFG1 = 9d200000
EMI_BANK1_CFG2 = 9d220000
EMI_BANK1_CFG3 = 00000000
DVB-PVR Button Device Driver(by Marusys Co.)
TestModMgr::CheckTestMode CmdLine = console=ttyAS0,115200 root=/dev/mtdblock3 me
m=32m bigphysarea=1024 coprocessor_mem=2m@0x04000000,2m@0x04200000
CMDLINE = console=ttyAS0,115200 root=/dev/mtdblock3 mem=32m bigphysarea=1024 cop
rocessor_mem=2m@0x04000000,2m@0x04200000
CMDLINE = console=ttyAS0,115200 root=/dev/mtdblock3 mem=32m bigphysarea=1024 cop
rocessor_mem=2m@0x04000000,2m@0x04200000
cannot fine test mode
TestModeMgr::CheckMode : TestMode Disabled
[ 11:53:32.131 ] tuxbox mgcamd v1.26 by mixvt (compiled Oct 31 2007 22:37:48)
[ 11:53:32.134 ] [mg] Net:9:7:0:5s Show ecm:1, emm:1 Up:5 Au:2 Dir:0 Osd:enigma:
80:11 Cache:7 Log192.168.0.202:8024 Reread:5
[ 11:53:32.135 ] [mg] Ecm cache time: 15
[ 11:53:32.135 ] Box type: stapi
[ 11:53:32.239 ] Conax.Key error 2: No such file or directory
[ 11:53:32.313 ] Keys readed
[ 11:53:32.541 ] Conax.Key error 2: No such file or directory
[ 11:53:32.545 ] ignore caid 1831
[ 11:53:32.545 ] ignore caid 1722
[ 11:53:32.546 ] ignore caid 1702
[ 11:53:32.553 ] caid replace 1722 -> 1801
[ 11:53:32.563 ] [config] newcamd route = dummy:127.0.0.1:34000 server newcs
[ 11:53:32.571 ] [config] newcamd route = dummy:127.0.0.1:34001 server newcs
[ 11:53:32.578 ] [config] newcamd route = dummy:127.0.0.1:34002 server newcs
[ 11:53:32.579 ] newcamd keep alive: 300, incoming port: 21000
[ 11:53:32.582 ] [mgcam] emm thread started
[ 11:53:32.583 ] [mgcamd] tps update started.
[ 11:53:32.583 ] [newcamd] Connecting to 127.0.0.1:34000...
[ 11:53:32.585 ] [newcamd] Connecting to 127.0.0.1:34001...
[ 11:53:32.586 ] [newcamd] Connecting to 127.0.0.1:34002...
[ 11:53:32.634 ] [mg0] service 0 already started with index 0
[ 11:53:32.635 ] [newcamd] Connection to 127.0.0.1:34000 failed (50ms)
[ 11:53:32.638 ] [newcamd] Connection to 127.0.0.1:34001 failed (51ms)
[ 11:53:32.640 ] [newcamd] Connection to 127.0.0.1:34002 failed (53ms)
[ 11:53:32.643 ] [mg0] No supported encryption system found
[ 11:53:32.644 ] [mg0] stopped
[ 11:54:33.048 ]
Box: uptime = 80s, CPU load: 1 min 98944 / 5 min 31584 / 15 min 10944
RAM in bytes: total 25956352 / free 1163264 / shared 0 / buffers = 2478080
[ 11:54:33.048 ] mgcamd: total memory allocated by malloc, in bytes: 135168 (132
kb), chunks 47440
ignore.
###
#ignore irdeto chids, (nova example):
#I: { 00 28 }
#I: { 00 15 }
#I: { 00 13 }
####
#ignore viaccess providers (example):
#V: { 02 0A 10}
#V: { 02 0A 20}
####
ignore seca providers (example):
#S: { 00 72 }
#S: { 00 84 }
####
#ignore caids (example):
#X: { 06 26 }
###
#fix for some german cable channels
X: { 18 31 }
X: { 17 22 }
X: { 17 02 }
sorry für meine dummheit aber wie die mg_cfg
alles klar
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }
# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }
# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared ****s
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network ****s update only
A: { 02 }
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
U: { 05 }
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
G: { 09 }
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30
# network ecm timeout in seconds
K: { 05 }
# newcamd dead routes connect retry, sec
Q: { 600 }
# network shares priority
# 00 gbox, newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd, gbox
# 02 newcamd, camd3, gbox, radegast
P: { 00 }
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 02 } root dreambox
# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 11 } 80
# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 03 } 192.168.0.202 8024 /tmp/mgcamd.log
# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer ****s while timeshifting or playing crypted recordings.
E: { 15 }
# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network ****s, do not resend the same emm twice, cache not cleared until restart
H: { 07 }
# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 05 }
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 127 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
B: { 00 }
ich hoffe das rein kopieren des gesammten Textes ist ok gewesen
neustart gemacht aber nix
na das wird wohl einen moment dauern
hab mit ultredit geändert und gespeichert
geht immer noch nicht
Ich hoffe ich blicke noch durch, hab keine ahnung von linux und bin auch schon etwas älter
kein erfolg,
ich verstehe nur nicht warum es bei neuem aufspielen des images funktioniert und ein tag später nicht mehr und das schon drei mal
Berechtigungen
