Kannst Du unter P: { 02 } einstellen wobei eigentlich immer die schnellste Karte bevorzugt wird
Druckbare Version
Kannst Du unter P: { 02 } einstellen wobei eigentlich immer die schnellste Karte bevorzugt wird
Die mgcamd geht aber nur bis zu einer gewissen version der cccam meine ich gelesen zu haben, kann das sein?
Wird das vll noch gefixt bei der nächsten version? Falls jemals noch ne SH4 kommen sollte :durcheinander-ersta
Offiziell bis Version 2.1.1Zitat:
Zitat von Helle85
...schau schon mal ganz anders aus :a115:
Connect im hadu steht und oscam wirft das raus:
2010/03/09 15:40:56 1262 c01 encrypted newcamd:34000-client 127.0.0.1 granted
(hdplus, au=hdplus)
2010/03/09 15:40:56 1262 c01 user hdplus authenticated successfully (using client 4343)
Karte hab ich grad bei Kumpel aber die ist in einer Stunge wieder hier und dann teste ich mal durch. AU sollte ich noch abstellen oder?
Gruß und bis neulich dann...fire113
Zitat:
Zitat von Tomyslav
Nein laß AU wegen den EMM Updates für die Karte
Danek Tomyslav, läuft einwandfrei mit G:33 :fussball_black_yell
Jedoch sind mit der einstellungen P:{02} meine Karten auf der dbox nicht bevorzugt sondern
immer noch die c-line vom kolegen! Muss da vll doch was anderes rein?
Hab jetzt auch Cccam auf der dbox am laufen wie es alle empfohlen habe.
Hab nur in der Cccam.cfg:
N: 127.0.0.1 34000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
eingefügt und vor dem rest die "#" gelassen, läuft!
Wie kommen jetzt aber die Updates über CCcam auf Oscam für meine S*y und HD+ Karte?
Kann ja mit NUR dieser N-line nicht gehen oder? Und in welchem log könnt ich sehen das Updates kommen
und geschrieben werden?
Kann mir jemand die nötige config stelle mal posten oder zeigen in der CCcam.cfg!?
Brauch ich die CCcam.prio? Da steht was von:
#S*y
P: 1801, 1702:000000, 1722:000000
Oder kann ich die komplett löschen?
Bei mir passt noch was nicht :(
Bekomme kein Bild im DVB-Viewer, Monitor von HADU wirt aber die 1830 aus.
Server: MEIN SERVER
Active: Yes Status: Started Version 2.1.4
Nodes : 8/8 -- CAIDProv : 10/10
S Req/Got Hop CAID Providers DCW (ms) Neg (ms) TimeoutDiscon Index Node ID
+ 1 1830 003411 000000 008011
Kein Plan was da noch fehlt bzw. warum ich kein Bild bekomme :stars:
Gruß fire113
EDIT---> hab nix verstellt! noch mal umgeschaltet--> FUNZT aber noch mit FETTEN Tonaussetzern, BartSipson klingt wie auf ner Technoparty ;) werd mich mal ans finetuning machen.
EDIT2--> Funzt alles OHNE die eigntlichen Einstellungen abgeändert zu haben. Einfach durchgezappt und alles war ok :)
1000 Dank nochmal Tomyslav.
Schön wenn es jetzt bei euch beiden funktioniert.
@Helle85: Stelle die CCCam auf der Serverbox noch auf EXTRA EMM LEVEL : yes dann kannst Du die Karte auch Updaten
Und bei der Oscam muss ich dann nichts beachten?
Wo kann ich sehen das ein update gemacht wurde?
Oscam.log?
In der Oscam.user muß der Eintrag
AU = 1 vorhanden sein bei deinem Benutzer.
Ja sollte im Log sichtbar sein
Du meinst bei den usern:
AU= Dann das Label
Und in der oscam.server
AU=1 unter dem jeweiligen reader, oder nicht?
Und nur die serverbox braucht das AU bei den Usern, die anderen clients bekommen die keys dann automatisch!?
Nur bei der oscam.user au = 1 reicht, dann gilt das für alle konfigurierte Reader.
Wenn ich richtig verfolgt habe, hast du nun die CCcam auf der Serverbox ?, dann mache es so wie ich es auch gemacht habe, das funktioniert 100%ig:
Trage in der Cccam.cfg der Serverbox folgendes ein:
http://www.spinnes-board.de/vb/showp...&postcount=130
Nun kannst du im Webif der CCcam die gesendeten EMMs vom Client sehen.
moin zusammen,
...komische Sache es ist!
Kann nicht richtig connecten, klappt nur sporadisch! Muß auf der box erst einen emu-reset machen, erst dann kann ich mich sofort via hadu einloggen.
Nach dem Login ist es auch kein Problem mehr, kann hadu stoppen bzw. DVB-Viewer ganz ausschalten, starte ich den DVB-Viewer neu hab ich sofort connect und das Bild ist da.
Brauch ich doch ne andere version vom cccam? oder sollte ich mal ein anderes Image (hab grad das aktuelle MD-Image in use) antesten?
Ansonsten rennt es prefekt, keine Aussetzter :) --> found (444 ms)
Gruß und bis neulich dann...fire113
Richtig, hab nun CCcam auf der Serverbox:Zitat:
Zitat von dirk01
Ist meine CCcam.cfg nun richtig für AU?:
In der Oscam.user hab ich einfach beim Serveraccount:Code:# CCcam team uvadi CCcam v2.1.4
#
# Special greets go to all our friends all over the world, you know who you are!
#
# Specjalne podziekowania dla Ludzi z Polski, dzieki ktorym jest duzo nowych funkcji w wersji 2.0.0
# Ostatnim razem zapomnielismy o nich wspomniec w readme. DZieki Chlopaki!
#
######################################################################
# friends #
######################################################################
# syntax for to add a friend user to CCcam with the max up hops limit (default = 5)
# sharing of emus (default = 1), allow emm (default = 1), and optional
# downshare limits per share (default = no limits) and optional
# downshare limits per share based on caid:id:sid
# and optional timeslots in which share is valid (to block channels on box of children after 19:00 for instance)
# if no timeslot is defined 24 hrs a day is used
# emus are shared only one level down, even if no limits given
#
# max username length 20
# password length 'unlimited'
#
#F: <username> <password> <uphops> <shareemus> <allowemm> ( { caid:id(:downhops), caid:id(:downhops), ... } { caid:id:sid, caid:id:sid, ... } { begintime-endtime, ... } ) hostname/ip address
#
# example:
#
# F: user1 pass1
#
# user1 gets all our shares at max 5 hops from us
# (our local cards + max five hops away). He can share down to his own
# clients. He also receive emu shares (if he has 'yes' behind his C: entry),
# and is allowed to send us emm.
#
# F: user2 pass2 0 1 0 { 0100:000080, 0622:000000:1, 0500:000000:2 }
#
# user2 gets only our local cards but no 0100:000080.
# and our 0622:000000 cards only for himself (1 hop down),
# and 0500 cards for himself plus one additional hop down.
# He also gets our emus, and is NOT allowed to send us emm (updates).
#
# F: user3 pass3 5 0 1 { 0:0:3, 0100:000080:1 }
#
# user3 gets all cards at a maximum of 5 hops away from us,
# and get's to share them down two further levels beyond his own level.
# But he is not allowed to share 0100:000080 down to other users.
# He gets no emus from us, and he is allowed to send us emm.
#
# F: user4 pass4 5 0 1 { 0:0:3, 0100:000080:1 } { 0100:000080:15df }
#
# user4 gets all cards at a maximum of 5 hops away from us,
# and get's to share them down two further levels beyond his own level.
# But he is not allowed to share 0100:000080 down to other users.
# He gets no emus from us, and he is allowed to send us emm.
# He is also not allowed to view channel 0100:000080:15df
#
# F: user4 pass4 5 0 1 { } { } { 12:00-17:00, 19:00-20:00 }
#
# user4 gets all cards at a maximum of 5 hops away from us,
# and get's to share them down two further levels beyond his own level.
# the share is only valid between 12:00 and 17:00 and between 19:00 and 20:00
# outside these hours the share will not give cw's to the client
#
#
# F: user5 pass5 5 1 1 { } { } { } 192.168.1.1
#
# user5 gets all cards at a maximum of 5 hops away from us
# user5 is only allowed to connect from the host 192.168.1.1
#
######################################################################
# connections #
######################################################################
# syntax for to add a client connection to other CCcam
# add yes on end to use friends emus (non public private key/emu,etc...),
# but only works when corresponding F line on server has '1' for <shareemus>
# optional limits just like F line, but for incoming shares (ignore shares more than 'uphops' away)
#
#C: <hostname> <port> <username> <password> <wantemus> ( { caid:id(:uphops), caid:id(:uphops), ... } )
#
#note: if {} limits are added, <wantemus> cannot be omitted. Use either yes or no.
#
# example:
#
# C: someserver.somedomain 12000 user1 pass1
# C: 192.168.1.2 12000 user2 pass2
# connects to CCcam without use of friends emus
#
# C: 192.168.1.2 12000 user3 pass3 yes
# connects to CCcam, and receives friends emus also.
# syntax for to add newcamd server connection
#
#N: <ip> <port> <username> <pass> <des(14byte)> <nr_of_hops_away (default: 1)> <stealth mode (default: 0)>
#
# example:
#
N: 127.0.0.1 34000 kai kai 01 02 03 04 05 06 07 08 09 10 11 12 13 14
#
# add a newcamd card, give it an offset of 2 hops, in the share list
#
# N: 127.0.0.1 10000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 2
#
# stealthy login on newcamd server:
#
# N: 127.0.0.1 10000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 1 1
#
# stealth modes: 0 = disabled, 1 = mgcamd new, 2 = mgcamd old, 3 = evocamd, 4 = generic
# syntax for to add radegast server connection
#
#R: <ip> <port> <ca4> <id6> <nr_of_hops_away (default: 1)>
#
# example:
#
# R: 127.0.0.1 678 0100 000080
# syntax for to add camd3 connection
#
#L: <ip> <port> <username> <pass> <ca4> <id6> <nr_of_hops_away (default: 1)>
#
# example:
#
# L: 127.0.0.1 567 dummy dummy 0100 000080
# syntax for add gbox connection
#
#G: <pass> <localhost> <localport> <peerpass> <peeraddress> <peerport>
#
# support optional limits just like C line (ignore shares more than 'uphops' away)
# { caid:id(:uphops), caid:id(:uphops), ... }
#
# example:
#
# G: AABBCCDD my.address.tv 2500 12345678 peer.address.tv 2500
######################################################################
# Other config settings #
######################################################################
# server shall listen on this port pro incoming connections
# default port is 12000, disable server with parm -s or set port 0
#
#SERVER LISTEN PORT : 12000
# server can give some info about server and client connections
# and cardinfo using telnet or webbrowser.
#
# Switch on/off access to info
# default is yes
#
#ALLOW TELNETINFO: no
#ALLOW WEBINFO: no
# Show extended client info when showing client list
# default is yes
#
#SHOW EXTENEDED CLIENT INFO : no
# The webinfo service can be protected with a username and password.
# This is switched off by default
#
#WEBINFO USERNAME : <username>
#WEBINFO PASSWORD : <password>
# The telnetinfo service can be protected with a username and password.
# This is switched off by default
#
#TELNETINFO USERNAME : <username>
#TELNETINFO PASSWORD : <password>
# default port for telnet is 16000
# default port for web is 16001
# supported commands:
# info
# activeclients
# clients
# servers
# shares
# providers
# entitlements
# example use:
# echo servers | telnet localhost 16000
# go with your browser to http://ip_CCcam_server:16001
#
#TELNETINFO LISTEN PORT : 16000
#WEBINFO LISTEN PORT : 16001
# time in seconds to keep On Screen Display active.
# default is 0 (turned off)
#
#ZAP OSD TIME : 3
# username used to show popup (default : root)
#OSD USERNAME : root
# password used to show popup (default : dreambox)
#OSD PASSWORD : dreambox
# port used to show popup (default : 80)
#OSD PORT : 80
# Serial reader config. Add as many as you have attached too your system
# replaces old name 'PHOENIX READER PATH', but still works.
# default is none
# optionally add readertype : phoenix,mouse,uniprog,sc8in1,smartreader+
# (when non readertype given defaults to uniprog (e.g. for mastera))
#
# SERIAL READER : <device> <type>
#
# example
#
#SERIAL READER : /dev/tts/0
# Serial reader smartcard write delay.
# Setting to finetune smartcard write speed, optimal setting depends on speed of system, and
# speed of card. Default value is calculated, but can overrule by setting.
# Use number of microseconds delay between bytes, 0 = no delay, -1 = calculated default
# Note: huge difference between values 0 and 1, because of schedular overhead
#
# SMARTCARD WRITE DELAY : <device> <delay>
#
# example, 10ms write delay on smartcard in reader attached to /dev/ttyUSB0
#
#SMARTCARD WRITE DELAY: /dev/ttyUSB0 10000
#
# NOTE on sc8in1; because 8 smartcards are used on the same devicename, use
# devicename_0 .. devicename_7 for settings which require devicename to make
# settings per smartcard. example /dev/ttyS0_0, /dev/ttyS0_1 ..
# example, 8ms write delay between bytes to smartcard on last sc8in1 channel, attached to /dev/tts/0
#
#SMARTCARD WRITE DELAY: /dev/tts/0_7 8000
# Smartcard clock speed override
# Setting override specified speed for smartcard.
# Don't add setting unless you're sure what you're doing.
# In 99% of the cases the reader selects the optimal speed.
# Adding this setting either slows your card down, or might destroy it.
#
# SMARTCARD CLOCK FREQUENCY : <device> <freq>
#
# example
#
#SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 5500000
# if timing should be shown in OSD and debug output
# default is no (turned off)
#
#SHOW TIMING : yes
# enables mini OSD which shows server(type), cardreader, keys or fta only
# default is no (turned off)
#
#MINI OSD : yes
# turns debugging on and off
# default is no (turned off)
#
#DEBUG : yes
# should CCcam try to read and parse newcamd.conf for server connections
# default is no (turned off)
#
#NEWCAMD CONF : yes
# configure what EMM blocker you want. Add as many as readers you have attached
# default is blocking nothing
#
# B: /dev/sci0 01
# 00 - nothing
# 01 - sa blocked
# 02 - ua blocked
# 04 - ga blocked
# and sum of for combinations
#
#examples
#
#B: /dev/tts/0 07
#B: /dev/sci0 01
# disable all local EMM readers
# saves lots of CPU, but you won't get any updates anymore
# (unless you get updates from your clients)
#
# default: no
#
DISABLE EMM : no
# with this setting you can
# allow a client on two hops away
# to send the updates to the cardserver
#
# default : no
#
EXTRA EMM LEVEL : yes
# with this setting you can
# configure how many emm listeners are started.
# for example use 2 when recording
# and viewing different systems and both need constant updates
#
# default : 1
#
EMM THREADS : 1
# overrule the nds boxkey (4 byte hex)
#
# BOXKEY: <device> <byte1> <byte2> <byte3> <byte4>
#
#example
#
#BOXKEY: /dev/sci0 00 11 22 33
# set card pin
# * please be very careful with this option as you could lock your card *
#
# PIN: <device> <pin>
#
#example
#
#PIN: /dev/sci0 1234
# overrule the irdeto camkey (8 byte hex), default 11 22 33 44 55 66 77 88
#
# CAMKEY: <device> <byte1> <byte2> <byte3> <byte4> <byte5> <byte6> <byte7> <byte8>
#
#example
#
#CAMKEY: /dev/sci0 11 22 33 44 55 66 77 88
# overrule the irdeto camdata (64 byte hex)
# trailing zero bytes can be omitted
# default for unknown ASC's is 11 22 33 44 55 66 77 88 00 00 .. 00, known ASC's have other defaults
#
# CAMDATA: <device> <byte1> <byte2> <byte3> <byte4> <byte5> <byte6> ... <byte64>
#
#example, when only the first 15 camdata bytes are nonzero
#
#CAMDATA: /dev/sci0 11 22 33 44 55 66 77 88 99 aa bb cc dd ee ff
# custom add id's for BEEF patched cards
#
# BEEF ID: <ident1> <ident2> <ident3> <ident4> <ident5> <ident6> <ident7> <ident8> <device>
#
#example
#
#BEEF ID: 4101 0 0 0 0 0 0 0 /dev/sci0
# what Softcam.Key should CCcam try to read
# defaults to /var/keys/SoftCam.Key
#
#SOFTKEY FILE : /var/keys/SoftCam.Key
# what AutoRoll.Key should CCcam try to read
# defaults to /var/keys/AutoRoll.Key
#
#AUTOROLL FILE : /var/keys/AutoRoll.Key
# what constant.cw should CCcam try to read
# defaults to /var/keys/constant.cw
# file content can be like
#
# ca4:id6:sid4:pmtpid4:ecmpid4:key16(01 02 03...)
#
#STATIC CW FILE : /var/keys/constant.cw
# in this file you can configure what CAIDs CCcam should prefer or ignore
# defaults to /var/etc/CCcam.prio
# file content can have ignores (I) and prio lists (P)
#
# note 1: I line affects both for ecm and emm (receive no emm on ignored systems)
# P line only affects ecm choice (emm still received for all available systems, not just the priority system)
#
# note 2: ident 0 means 'all idents'. So 'caid:0' is the same as 'caid'.
#
# note 3: for some systems (e.g. nagra (caid 18xx)), the ident is not known at the time the
# prio lists are checked. In that case, matching is done on caid only, even if the P line
# defines nonzero idents. So for example '1801:401' behaves the same as '1801' in a P line
# I lines work differently, they are checked two times, once before ecm or emm is received, again
# after ecm or emm are received (and nagra ident should be known)
# P lines are only checked once, before ecm received.
#
# note 4: if a P line contains caid:ident pairs which are not available for the current
# channel, that P line is not used for that channel.
# Example, channel has systems 626, 1801:401 then P line with "1801,100:96,626" is ignored by that channel,
# because channel doesn't have 100:96.
# But P line with "1801" works, and also "626,1801" will work for channel
#
# note 5: P lines are parsed in the order in which they are found in the prio file.
# Only the first matching P line is used
#
# situation 1: ignore allways this caid, all idents, on all channels
# I: caid
#
# situation 2: ignore allways this caid/ident pair
# I: caid:ident
#
# situation 3: ignore this caid/ident pair, on channel 'sid'
# I: caid:ident:sid
#
# situation 4: when both caid1 and caid2 exist for a channel, prefer caid1 over caid2
# P: caid1, caid2
#
# situation 5: when caid1:ident1 till caidN:identN exist for a channel, use them in order of this list.
# P: caid1:ident1, caid2:ident2, .., caidN:identN
#
# situation 6: when caid1:ident1 till caidN:identN exist for channel 'sid', use them in order of this list.
# Sid on first caid/ident pair identifies sid for which list is used. All other sids ignore this list.
# P: caid1:ident1:sid, caid2:ident2, .., caidN:identN
#
#CAID PRIO FILE : /var/etc/CCcam.prio
#
# In this file all provider idents are defined
# The info from this file is being used in the web interface
# format:
# <caid><ident> "Provider description"
#
# PROVIDERINFO FILE : /var/etc/CCcam.providers
#
# In this file all channel idents are defined
# The info from this file is being used in the web interface
# format:
# caid:ident:sid "Channel description"
#
# CHANNELINFO FILE : /var/etc/CCcam.channelinfo
# write wrong logins to file
# defaults is off
#
#LOG WARNINGS : /tmp/warnings.txt
# global setting for stealthy login to newcamd/newcs server, N line can overrule
# stealth modes: 0 = disabled, 1 = mgcamd new, 2 = mgcamd old, 3 = evocamd, 4 = generic
# default: 0
#
#NEWCAMD STEALTH : 0
# load balancing between identical cards, list device names of card readers containing identical cards,
# optionally followed by a list of service id's which are to be excluded from loadbalancing
#
# LOADBALANCE : <device1> <device2> .. <devicen> { <exceptsid1>, <exceptsid2> .. , <exceptsidn> }
#
# multiple loadbalance groups can be configured, by adding multiple lines
# warning: restart is required, when loadbalance group config changes
#
#example 1: load balance requests for three identical cards
#
# LOADBALANCE : /dev/ttyS0 /dev/ttyS1 /dev/ttyS2
#
#example 2: load balance requests for two almost identical cards, sid 0df3 and 0de1 are only available
#on one of the cards, so requests for these sids shouldn't be loadbalanced
#
# LOADBALANCE : /dev/ttyS5 /dev/ttyS6 { 0df3,0de1 }
# in version 1.2.1 and lower there was a problem which could lead to disconnecting clients
# in version 1.4.0 network load was significantly reduced
# in version 1.7.0 dangerous password bug was fixed
# in order to take advantage of these fixes, all clients should upgrade
# with this setting you can force that clients at least use a certain version otherwise they are denied when logging in
#
# default : accept all versions
#
#example 1: avoid disconnecting clients problem
#
#MINIMUM CLIENT VERSION : 1.3.0
#
#example 2: achieve network load decrease
#
#MINIMUM CLIENT VERSION : 1.4.0
#
#example 3: don't allow potentially wrong passwords (pre 1.7.0 has password bug)
#
#MINIMUM CLIENT VERSION : 1.7.0
# Irdeto smartcards: option to disable smart chid checking for irdeto smartcards.
# Default, only chids advertised by card are accepted.
# This avoids a lot of unwanted card traffic
#
# But if smartcard has hidden/unknown chids, all chids should be tried.
# In that case specify 'TRY ALL CHIDS' option for cardreader.
# Use with care, enabling option causes more card traffic.
# Only use setting when some channels don't work without it.
# note: if even this setting don't help decode all channels, try using
# commandline arg -l, to disable all self-learning features (warning: slower)
#
#TRY ALL CHIDS : <device>
#
#example: card in /dev/ttyUSB0 gets ecm for all possible chids, not
#just the chids it officially supports
#
#TRY ALL CHIDS : /dev/ttyUSB0
# perform smartcard post init commands
#
# POSTINIT : <device> <filename> (<autodelete>)
#
# send commands in 'filename' to 'device', and delete 'filename' when
# optional 'autodelete' argument nonzero
#
#example:
#
#POSTINIT : /dev/sci0 /tmp/postinit
#
#example /tmp/postinit contents:
#c134000003000000
#c13201000a
# Option to override autodetected dvb api version. Restart needed.
#
#DVB API: <value>
#
# <value> -1 = no dvb, 1 = dvb api 1, 3 = dvb api 3
#
# WARNING: only use when autodetect fails!
#
#example, disable nonworking dvb hardware:
#DVB API: -1
# Option to set global share limits
#
#GLOBAL LIMITS: { caid:id(:downhops), caid:id(:downhops), ... }
#
#example:
#
#GLOBAL LIMITS : { 0100:000080, 0622:000000:1, 0500:000000:2 }
#
# all users get no 0100:000080.
# and our 0622:000000 cards only for themself (1 hop down),
# and 0500 cards for themself plus one additional hop down.
# global limits are overridden by client specific limits (see F:)
# Option to reject shares with less than required downhops on clientside
#
#MINIMUM DOWNHOPS: <value>
#
# default: 0 (don't ignore any shares)
#
#example:
#
#MINIMUM DOWNHOPS: 1
#
# ignore shares that have less than 1 'downhops' (i.e. can not be shared
# further down to other clients)
# Option to ignore all shares that go through a certain node
#
#IGNORE NODE: <nodeid>
#
#example, ignore two nodes:
#
#IGNORE NODE: ccd536ab515767ad
#IGNORE NODE: aad536ab515761af
# The seca handler is used to better support simulcrypt on the same ident
#
# With this setting you can change the behaviour of how SECA has to be used
# This setting is ignored unless SECA2/SECA3 simulcrypt is detected!!
#
# When disabled CCcam behaves like previous versions
#
# When "prefer SECA3 over SECA2" is enabled try to use SECA3 ecm first, then SECA2
#
# When "Ignore SECA2" is enabled, ignore all SECA2 ecm so a SECA3 card will not get SECA2 request which it cannot handle
#
# When "Ignore SECA3" is enabled, ignore all SECA3 ecm so a SECA2 card will not get SECA3 request which it cannot handle
#
#
# The following settings can be used
#
# SECA HANDLER: <value>
# <value> : 0 = disabled, 1 = prefer SECA3 over SECA2, 2 = prefer SECA2 over SECA3, 3 = Ignore SECA2, 4 = Ignore SECA3
#
# default: 1
#
# Example try to use SECA3 ecm first, then SECA2
#SECA HANDLER: 1
#
# Example try to use SECA2 ecm first, then SECA3
#SECA HANDLER: 2
#
# Example to ignore all SECA2 ecm so a SECA3 card will not get SECA2 request which it cannot handle
#SECA HANDLER: 3
#
# Example to ignore all SECA3 ecm so a SECA2 card will not get SECA3 request which it cannot handle
#SECA HANDLER: 4
# Configure limited list of accepted sids for smartcard
# When omitted, all sids are allowed.
# (can work together with LOADBALANCE configuration, or for standalone cards)
#
# SMARTCARD SID ASSIGN : <device> <maxnumberofsids> { <sid1>, <sid2>, ... <sidn> }
#
# <device> is the reader devicenode
# <maxnumberofsids> limits the total number of sids assigned to the card (0 = use length of sid list)
# { <sid1>..<sidn> } lists the sids that are assigned to the smartcard, when omitted, <maxnumberofsids> is used to auto assign sids
#
# when <maxnumberofsids> is larger than the length of the sidlist, the remainder of the sids are auto assigned, till the list reaches <maxnumberofsids>
# Check entitlement output for realtime assignment list
#
# WARNING: when SMARTCARD SID ASSIGN config changes, restart is required before settings take effect
#
#example1: smartcard in device /dev/ttyUSB0 only handles requests for sids df3, df4, df5
#
# SMARTCARD SID ASSIGN : /dev/ttyUSB0 0 { 0df3,0df4,0df5 }
#
#example2: smartcard in device /dev/ttyUSB0 handles requests for max 5 sids, auto assigned in the order of occurance. A request for a 6th sid will be denied.
#
# SMARTCARD SID ASSIGN : /dev/ttyUSB0 5
#
#example3: smartcard in device /dev/ttyUSB0 handles requests for max 5 sids, 3 of which are df3, df4, df5, remaining 2 are auto assigned
#
# SMARTCARD SID ASSIGN : /dev/ttyUSB0 5 { 0df3,0df4,0df5 }
AU=1 eingetragen wie du gesagt hast!
Und das spricht nun die Oscam:
Code:-------------------------------------------------------------------------------
>> OSCam << cardserver started at Wed Mar 10 17:40:35 2010
-------------------------------------------------------------------------------
2010/03/10 17:40:35 19478 s version=0.99.4-SB-Alno, build #1656, system=powerpc-dbox2-linux, nice=-1
2010/03/10 17:40:35 19478 s max. clients=29, client max. idle=120 sec
2010/03/10 17:40:35 19478 s max. logsize=unlimited
2010/03/10 17:40:35 19478 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
2010/03/10 17:40:35 19478 s shared memory initialized (size=543268, fd=7)
2010/03/10 17:40:35 19478 s auth size=4752
2010/03/10 17:40:35 19478 s Cannot open file "/var/tuxbox/config/oscam.services" (errno=2)
2010/03/10 17:40:35 19478 s userdb reloaded: 0 accounts freed, 3 accounts loaded, 0 expired, 0 disabled
2010/03/10 17:40:35 19478 s signal handling initialized (type=sysv)
2010/03/10 17:40:35 19478 s can't open file "/var/tuxbox/config/oscam.srvid" (err=2), no service-id's loaded
2010/03/10 17:40:35 19478 s monitor: disabled
2010/03/10 17:40:35 19478 s camd 3.3x: disabled
2010/03/10 17:40:35 19478 s camd 3.5x: disabled
2010/03/10 17:40:35 19478 s cs378x: disabled
2010/03/10 17:40:35 19478 s newcamd: initialized (fd=23, port=34000, crypted)
2010/03/10 17:40:35 19478 s CAID: 1702
2010/03/10 17:40:35 19478 s provid #0: 000000
2010/03/10 17:40:35 19478 s newcamd: initialized (fd=24, port=34001, crypted)
2010/03/10 17:40:35 19478 s CAID: 1801
2010/03/10 17:40:35 19478 s provid #0: 000000
2010/03/10 17:40:35 19478 s cccam: disabled
2010/03/10 17:40:35 19478 s radegast: disabled
2010/03/10 17:40:35 19478 s resolver thread started
2010/03/10 17:40:35 19478 s logger started (pid=19481)
2010/03/10 17:40:35 19478 s resolver started (pid=19482, delay=30 sec)
2010/03/10 17:40:35 19478 s http started (pid=19483)
2010/03/10 17:40:35 19483 h HTTP Server listening on port 0
2010/03/10 17:40:35 19478 s reader started (pid=19484, device=/dev/tts/1, detect=cd, mhz=600, cardmhz=600)
2010/03/10 17:40:35 19478 s reader started (pid=19485, device=/dev/tts/0, detect=cd, mhz=368, cardmhz=368)
2010/03/10 17:40:35 19478 s waiting for local card init
2010/03/10 17:40:38 19484 r03 card detected
2010/03/10 17:40:38 19485 r04 card detected
2010/03/10 17:40:41 19484 r03 ATR: xxx2010/03/10 17:40:41 19485 r04 ATR: xxx
2010/03/10 17:40:42 19484 r03 Maximum frequency for this card is formally 6 Mhz, clocking it to 6.00 Mhz
2010/03/10 17:40:43 19484 r03 detect Irdeto tunneled NAGRA card
2010/03/10 17:40:43 19484 r03 switching back to Irdeto mode
2010/03/10 17:40:43 19484 r03 detect Irdeto card
2010/03/10 17:40:43 19485 r04 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.68 Mhz
2010/03/10 17:40:43 19484 r03 caid: 1702, acs: 3.84
2010/03/10 17:40:43 19484 r03 ascii serial: xxx, hex serial: xxx, hex base: 1A
2010/03/10 17:40:44 19485 r04 detect native NAGRA card T1 protocol
2010/03/10 17:40:45 19485 r04 -----------------------------------------
2010/03/10 17:40:45 19485 r04 |id |tier |valid from |valid to |
2010/03/10 17:40:45 19485 r04 +----+--------+------------+------------+
2010/03/10 17:40:45 19485 r04 |8011|0064 |2010/02/24 |2011/02/25 |
2010/03/10 17:40:45 19485 r04 |8011|0065 |1992/01/01 |1993/01/01 |
2010/03/10 17:40:45 19485 r04 -----------------------------------------
2010/03/10 17:40:46 19485 r04 ROM: xxxx
2010/03/10 17:40:46 19485 r04 REV: xxxx
2010/03/10 17:40:46 19485 r04 SER: xxxx
2010/03/10 17:40:46 19485 r04 CAID: xxx
2010/03/10 17:40:46 19485 r04 Prv.ID: 00 00 34 11 (sysid)
2010/03/10 17:40:46 19485 r04 Prv.ID: 00 00 00 00
2010/03/10 17:40:46 19485 r04 Prv.ID: 00 00 80 11
2010/03/10 17:40:46 19485 r04 [nagra-reader] ready for requests
2010/03/10 17:40:46 19484 r03 providers: 2 (ffffff,ffffff)
2010/03/10 17:40:47 19484 r03 provider: 2, id: FFFFFF
2010/03/10 17:40:47 19484 r03 chid: 0107, date: 2008/09/28 - 2008/10/14
2010/03/10 17:40:47 19484 r03 chid: 0108, date: 2008/09/28 - 2008/10/14
2010/03/10 17:40:47 19484 r03 chid: 7D2B, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:47 19484 r03 chid: 7D24, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:47 19484 r03 chid: 7D23, date: 2008/01/19 - 2008/09/29
2010/03/10 17:40:47 19484 r03 chid: 61BD, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:47 19484 r03 chid: 04BA, date: 2009/12/31 - 2010/05/01
2010/03/10 17:40:47 19484 r03 chid: 04C4, date: 2009/12/31 - 2010/05/01
2010/03/10 17:40:47 19484 r03 chid: 7D2C, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:47 19484 r03 chid: 7D2D, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:47 19484 r03 chid: 7D22, date: 2009/12/31 - 2010/05/01
2010/03/10 17:40:47 19484 r03 chid: 03FF, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:47 19484 r03 chid: 05DC, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:47 19484 r03 chid: 03F4, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:47 19484 r03 chid: 03EC, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:47 19484 r03 chid: 03EF, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:47 19484 r03 chid: 03E9, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:47 19484 r03 chid: 03ED, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:47 19484 r03 chid: 03F3, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:47 19484 r03 chid: 03F5, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:48 19484 r03 chid: 03EB, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:48 19484 r03 chid: 03F6, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:48 19484 r03 chid: 03F9, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:48 19484 r03 chid: 0401, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:48 19484 r03 chid: 0402, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:48 19484 r03 chid: 03F7, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:48 19484 r03 chid: 0403, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:48 19484 r03 chid: 0404, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:48 19484 r03 chid: 03FA, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:48 19484 r03 chid: 041A, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:48 19484 r03 chid: 000F, date: 2009/12/31 - 2010/05/01
2010/03/10 17:40:48 19484 r03 chid: 7D21, date: 2009/12/31 - 2010/05/01
2010/03/10 17:40:48 19484 r03 chid: 03DE, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:48 19484 r03 chid: 03DF, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:48 19484 r03 chid: 0400, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:48 19484 r03 chid: 03F1, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:48 19484 r03 chid: 03EA, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:48 19484 r03 chid: 03F2, date: 2009/12/31 - 2010/05/01
2010/03/10 17:40:48 19484 r03 chid: 7D27, date: 2009/12/31 - 2010/05/01
2010/03/10 17:40:48 19484 r03 chid: 03FD, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:48 19484 r03 chid: 00F0, date: 2009/12/31 - 2010/05/01
2010/03/10 17:40:48 19484 r03 chid: 0515, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:48 19484 r03 chid: 03E8, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:48 19484 r03 chid: 0514, date: 2009/12/31 - 2010/05/01
2010/03/10 17:40:48 19484 r03 chid: 044C, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:48 19484 r03 chid: 00F5, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:48 19484 r03 chid: 0069, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:48 19484 r03 chid: 0102, date: 2008/09/28 - 2008/10/14
2010/03/10 17:40:48 19484 r03 chid: 026C, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:48 19484 r03 chid: 028B, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:49 19484 r03 chid: 028C, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:49 19484 r03 chid: 028D, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:49 19484 r03 chid: 028E, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:49 19484 r03 chid: 028F, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:49 19484 r03 chid: 0290, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:49 19484 r03 chid: 029E, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:49 19484 r03 chid: 0291, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:49 19484 r03 chid: 0292, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:49 19484 r03 chid: 0293, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:49 19484 r03 chid: 0294, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:49 19484 r03 chid: 0295, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:49 19484 r03 chid: 028A, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:49 19484 r03 chid: 0298, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:49 19484 r03 chid: 0299, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:49 19484 r03 chid: 029A, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:49 19484 r03 chid: 029B, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:49 19484 r03 chid: 029C, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:49 19484 r03 chid: 0103, date: 2008/09/28 - 2008/10/14
2010/03/10 17:40:49 19484 r03 chid: 029C, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:49 19484 r03 chid: 0104, date: 2008/09/28 - 2008/10/14
2010/03/10 17:40:50 19484 r03 chid: 0406, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:50 19484 r03 chid: 0105, date: 2008/09/28 - 2008/10/14
2010/03/10 17:40:50 19484 r03 chid: 0004, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:50 19484 r03 chid: 04CE, date: 2009/12/31 - 2010/05/01
2010/03/10 17:40:50 19484 r03 chid: 0582, date: 2009/12/31 - 2010/05/01
2010/03/10 17:40:50 19484 r03 chid: 029D, date: 2008/01/19 - 2008/01/21
2010/03/10 17:40:50 19484 r03 chid: 057A, date: 2009/12/31 - 2010/05/01
2010/03/10 17:40:50 19484 r03 [irdeto-reader] ready for requests
2010/03/10 17:40:51 19478 s init for all local cards done
2010/03/10 17:40:51 19478 s anti cascading disabled
2010/03/10 17:40:51 19478 s dvbapi disabled
2010/03/10 17:40:51 19478 s client(1) connect from 192.168.2.150 (pid=19539, pipfd=33)
2010/03/10 17:40:51 19478 s client(2) connect from 192.168.2.150 (pid=19540, pipfd=34)
2010/03/10 17:40:51 19478 s client(3) connect from 127.0.0.1 (pid=19541, pipfd=35)
2010/03/10 17:40:51 19541 c03 Connection closed to client
2010/03/10 17:40:51 19539 c01 encrypted newcamd:34000-client 192.168.2.150 granted (eltern, au=0)
2010/03/10 17:40:51 19539 c01 user eltern authenticated successfully (using client 6D67)
2010/03/10 17:40:51 19539 c01 AU disabled for user eltern
2010/03/10 17:40:51 19540 c02 encrypted newcamd:34001-client 192.168.2.150 granted (eltern, au=0)
2010/03/10 17:40:51 19540 c02 user eltern authenticated successfully (using client 6D67)
2010/03/10 17:40:51 19540 c02 AU disabled for user eltern
2010/03/10 17:40:52 19478 s client(3) connect from 127.0.0.1 (pid=19545, pipfd=35)
2010/03/10 17:40:52 19478 s client(4) connect from 127.0.0.1 (pid=19548, pipfd=36)
2010/03/10 17:40:53 19545 c03 encrypted newcamd:34000-client 127.0.0.1 granted (kai, au(auto)=sky)
2010/03/10 17:40:53 19545 c03 user kai authenticated successfully (using client 4343)
2010/03/10 17:40:53 19545 c03 AU flag 0 for user kai
2010/03/10 17:40:53 19548 c04 encrypted newcamd:34000-client 127.0.0.1 granted (kai, au(auto)=sky)
2010/03/10 17:40:53 19548 c04 user kai authenticated successfully (using client 4343)
2010/03/10 17:40:53 19548 c04 AU flag 0 for user kai
2010/03/10 17:40:53 19548 c04 Connection closed to client
2010/03/10 17:40:53 19548 c04 kai disconnected from 127.0.0.1
2010/03/10 17:41:07 19545 c03 kai (1702&000000/0032/93:6A41): found (684 ms) by sky
2010/03/10 17:41:09 19545 c03 kai (1702&000000/0032/93:310B): found (643 ms) by sky
2010/03/10 17:41:16 19545 c03 kai (1702&000000/0032/93:CF1F): found (671 ms) by sky
2010/03/10 17:41:18 19478 s client(4) connect from 192.168.2.106 (pid=19578, pipfd=36)
2010/03/10 17:41:18 19478 s client(5) connect from 192.168.2.106 (pid=19579, pipfd=37)
2010/03/10 17:41:18 19578 c04 encrypted newcamd:34000-client 192.168.2.106 granted (steven, au=0)
2010/03/10 17:41:18 19578 c04 user steven authenticated successfully (using client 6D67)
2010/03/10 17:41:18 19578 c04 AU disabled for user steven
2010/03/10 17:41:18 19579 c05 encrypted newcamd:34001-client 192.168.2.106 granted (steven, au=0)
2010/03/10 17:41:18 19579 c05 user steven authenticated successfully (using client 6D67)
2010/03/10 17:41:18 19579 c05 AU disabled for user steven
2010/03/10 17:41:23 19545 c03 kai (1702&000000/0032/93:F98A): found (642 ms) by sky
2010/03/10 17:41:30 19545 c03 kai (1702&000000/0032/93:7913): found (665 ms) by sky
2010/03/10 17:41:37 19545 c03 Connection closed to client
2010/03/10 17:41:37 19545 c03 kai disconnected from 127.0.0.1
2010/03/10 17:41:37 19478 s client(3) connect from 127.0.0.1 (pid=19599, pipfd=35)
2010/03/10 17:41:37 19599 c03 encrypted newcamd:34000-client 127.0.0.1 granted (kai, au(auto)=sky)
2010/03/10 17:41:37 19599 c03 user kai authenticated successfully (using client 4343)
2010/03/10 17:41:37 19599 c03 AU flag 0 for user kai
2010/03/10 17:41:40 19599 c03 Connection closed to client
2010/03/10 17:41:43 19599 c03 Connection closed to client
2010/03/10 17:41:43 19599 c03 kai disconnected from 127.0.0.1
2010/03/10 17:41:53 19478 s client(3) connect from 127.0.0.1 (pid=19615, pipfd=35)
2010/03/10 17:41:53 19615 c03 encrypted newcamd:34000-client 127.0.0.1 granted (kai, au(auto)=sky)
2010/03/10 17:41:53 19615 c03 user kai authenticated successfully (using client 4343)
2010/03/10 17:41:53 19615 c03 AU flag 0 for user kai
2010/03/10 17:41:59 19615 c03 Connection closed to client
2010/03/10 17:41:59 19615 c03 kai disconnected from 127.0.0.1
2010/03/10 17:41:59 19478 s client(3) connect from 127.0.0.1 (pid=19621, pipfd=35)
2010/03/10 17:41:59 19621 c03 encrypted newcamd:34000-client 127.0.0.1 granted (kai, au(auto)=sky)
2010/03/10 17:41:59 19621 c03 user kai authenticated successfully (using client 4343)
2010/03/10 17:41:59 19621 c03 AU flag 0 for user kai
2010/03/10 17:42:01 19621 c03 Connection closed to client
2010/03/10 17:42:03 19621 c03 Connection closed to client
2010/03/10 17:42:03 19621 c03 kai disconnected from 127.0.0.1
2010/03/10 17:42:12 19578 c04 steven (1702&000000/0082/93:A149): not found (692 ms)
2010/03/10 17:42:12 19579 c05 steven (1801&000000/0082/89:3D1C): not found (242 ms)
2010/03/10 17:42:13 19478 s client(3) connect from 127.0.0.1 (pid=19637, pipfd=35)
2010/03/10 17:42:14 19637 c03 encrypted newcamd:34000-client 127.0.0.1 granted (kai, au(auto)=sky)
2010/03/10 17:42:14 19637 c03 user kai authenticated successfully (using client 4343)
2010/03/10 17:42:14 19637 c03 AU flag 0 for user kai
2010/03/10 17:42:21 19637 c03 kai (1702&000000/0032/93:BDD3): found (716 ms) by sky
2010/03/10 17:42:28 19637 c03 kai (1702&000000/0032/93:438F): found (652 ms) by sky
2010/03/10 17:42:34 19637 c03 kai (1702&000000/0032/93:A499): found (646 ms) by sky
2010/03/10 17:42:42 19637 c03 kai (1702&000000/0032/93:5AFB): found (658 ms) by sky
2010/03/10 17:42:49 19637 c03 kai (1702&000000/0032/93:4A85): found (695 ms) by sky
2010/03/10 17:42:52 19484 r03 kai type=00, len=139, idx=0, cnt=1: written (261 ms)
2010/03/10 17:42:53 19484 r03 kai type=d0, len=137, idx=1, cnt=1: written (522 ms)
2010/03/10 17:42:55 19637 c03 kai (1702&000000/0032/93:F34F): found (655 ms) by sky
2010/03/10 17:43:02 19484 r03 kai type=00, len=139, idx=2, cnt=1: written (267 ms)
2010/03/10 17:43:03 19484 r03 kai type=d0, len=137, idx=3, cnt=1: written (691 ms)
2010/03/10 17:43:03 19637 c03 kai (1702&000000/0032/93:1A81): found (852 ms) by sky
2010/03/10 17:43:07 19484 r03 kai type=d2, len=139, idx=4, cnt=1: written (770 ms)
2010/03/10 17:43:10 19637 c03 kai (1702&000000/0032/93:4B31): found (650 ms) by sky
2010/03/10 17:43:16 19637 c03 kai (1702&000000/0032/93:AA2A): found (656 ms) by sky
2010/03/10 17:43:24 19637 c03 kai (1702&000000/0032/93:4259): found (660 ms) by sky
2010/03/10 17:43:28 19484 r03 kai type=00, len=139, idx=5, cnt=1: written (256 ms)
2010/03/10 17:43:29 19484 r03 kai type=d0, len=137, idx=6, cnt=1: written (681 ms)
2010/03/10 17:43:31 19637 c03 kai (1702&000000/0032/93:894E): found (685 ms) by sky
2010/03/10 17:43:37 19637 c03 kai (1702&000000/0032/93:3E0F): found (638 ms) by sky
2010/03/10 17:43:44 19637 c03 kai (1702&000000/0032/93:FEE7): found (649 ms) by sky
2010/03/10 17:43:51 19637 c03 kai (1702&000000/0032/93:E18D): found (652 ms) by sky
2010/03/10 17:43:58 19637 c03 kai (1702&000000/0032/93:0FE9): found (650 ms) by sky
2010/03/10 17:44:05 19637 c03 kai (1702&000000/0032/93:2539): found (652 ms) by sky
2010/03/10 17:44:12 19637 c03 kai (1702&000000/0032/93:1E24): found (702 ms) by sky
2010/03/10 17:44:19 19637 c03 kai (1702&000000/0032/93:F424): found (644 ms) by sky
2010/03/10 17:44:26 19637 c03 kai (1702&000000/0032/93:BE86): found (662 ms) by sky
2010/03/10 17:44:33 19637 c03 kai (1702&000000/0032/93:E1D9): found (646 ms) by sky
2010/03/10 17:44:40 19637 c03 kai (1702&000000/0032/93:B719): found (651 ms) by sky
2010/03/10 17:44:47 19637 c03 kai (1702&000000/0032/93:27A1): found (650 ms) by sky
2010/03/10 17:44:49 19484 r03 kai type=d2, len=139, idx=7, cnt=1: written (750 ms)
2010/03/10 17:44:49 19484 r03 kai type=00, len=139, idx=8, cnt=1: written (256 ms)
2010/03/10 17:44:50 19484 r03 kai type=d0, len=137, idx=9, cnt=1: written (702 ms)
2010/03/10 17:44:54 19637 c03 kai (1702&000000/0032/93:ECE9): found (652 ms) by sky
2010/03/10 17:45:01 19637 c03 kai (1702&000000/0032/93:53A5): found (652 ms) by sky
2010/03/10 17:45:08 19637 c03 kai (1702&000000/0032/93:66F6): found (677 ms) by sky
2010/03/10 17:45:15 19637 c03 kai (1702&000000/0032/93:057F): found (650 ms) by sky
2010/03/10 17:45:16 19484 r03 kai type=00, len=139, idx=10, cnt=1: written (270 ms)
2010/03/10 17:45:17 19484 r03 kai type=d0, len=137, idx=11, cnt=1: written (689 ms)
2010/03/10 17:45:21 19484 r03 kai type=00, len=139, idx=12, cnt=1: written (261 ms)
2010/03/10 17:45:22 19637 c03 kai (1702&000000/0032/93:18DD): found (641 ms) by sky
2010/03/10 17:45:23 19484 r03 kai type=d0, len=137, idx=13, cnt=1: written (676 ms)
2010/03/10 17:45:27 19484 r03 kai type=00, len=139, idx=5, cnt=2: written (256 ms)
2010/03/10 17:45:28 19484 r03 kai type=d0, len=137, idx=6, cnt=2: written (685 ms)
2010/03/10 17:45:29 19637 c03 kai (1702&000000/0032/93:3626): found (651 ms) by sky
2010/03/10 17:45:36 19637 c03 kai (1702&000000/0032/93:E712): found (639 ms) by sky
2010/03/10 17:45:40 19484 r03 kai type=d2, len=139, idx=14, cnt=1: written (605 ms)
2010/03/10 17:45:43 19637 c03 kai (1702&000000/0032/93:DA92): found (648 ms) by sky
2010/03/10 17:45:50 19637 c03 kai (1702&000000/0032/93:5825): found (640 ms) by sky
2010/03/10 17:45:57 19637 c03 kai (1702&000000/0032/93:78D3): found (644 ms) by sky
2010/03/10 17:46:04 19637 c03 kai (1702&000000/0032/93:A9E5): found (637 ms) by sky
2010/03/10 17:46:11 19637 c03 kai (1702&000000/0032/93:89E7): found (648 ms) by sky
2010/03/10 17:46:18 19637 c03 kai (1702&000000/0032/93:9B79): found (647 ms) by sky
2010/03/10 17:46:25 19637 c03 kai (1702&000000/0032/93:4692): found (653 ms) by sky
2010/03/10 17:46:32 19637 c03 kai (1702&000000/0032/93:67FC): found (650 ms) by sky
2010/03/10 17:46:39 19637 c03 kai (1702&000000/0032/93:AC75): found (678 ms) by sky
2010/03/10 17:46:43 19484 r03 kai type=d2, len=139, idx=15, cnt=1: written (772 ms)
2010/03/10 17:46:46 19637 c03 kai (1702&000000/0032/93:8709): found (652 ms) by sky
2010/03/10 17:46:53 19637 c03 kai (1702&000000/0032/93:8EBA): found (667 ms) by sky
2010/03/10 17:46:57 19484 r03 kai type=00, len=139, idx=16, cnt=1: written (257 ms)
2010/03/10 17:47:00 19484 r03 kai type=d0, len=137, idx=17, cnt=1: written (687 ms)
2010/03/10 17:47:01 19637 c03 kai (1702&000000/0032/93:6E4E): found (997 ms) by sky
2010/03/10 17:47:07 19637 c03 kai (1702&000000/0032/93:2919): found (657 ms) by sky
2010/03/10 17:47:09 19484 r03 kai type=00, len=139, idx=18, cnt=1: written (266 ms)
2010/03/10 17:47:13 19484 r03 kai type=d0, len=137, idx=19, cnt=1: written (680 ms)
2010/03/10 17:47:14 19637 c03 kai (1702&000000/0032/93:2A03): found (649 ms) by sky
2010/03/10 17:47:16 19484 r03 kai type=00, len=139, idx=20, cnt=1: written (262 ms)
2010/03/10 17:47:19 19484 r03 kai type=d0, len=137, idx=21, cnt=1: written (524 ms)
2010/03/10 17:47:21 19637 c03 kai (1702&000000/0032/93:A461): found (659 ms) by sky
2010/03/10 17:47:24 19484 r03 kai type=d0, len=137, idx=22, cnt=1: written (557 ms)
2010/03/10 17:47:28 19637 c03 kai (1702&000000/0032/93:DE97): found (642 ms) by sky
2010/03/10 17:47:32 19484 r03 kai type=d2, len=139, idx=23, cnt=1: written (617 ms)
2010/03/10 17:47:32 19484 r03 kai type=d2, len=139, idx=24, cnt=1: written (626 ms)
2010/03/10 17:47:35 19637 c03 kai (1702&000000/0032/93:6DDD): found (700 ms) by sky
2010/03/10 17:47:42 19637 c03 kai (1702&000000/0032/93:715C): found (714 ms) by sky
2010/03/10 17:47:49 19637 c03 kai (1702&000000/0032/93:8DFC): found (646 ms) by sky
2010/03/10 17:47:56 19637 c03 kai (1702&000000/0032/93:0FB6): found (645 ms) by sky
2010/03/10 17:48:03 19637 c03 kai (1702&000000/0032/93:F8C8): found (651 ms) by sky
2010/03/10 17:48:10 19637 c03 kai (1702&000000/0032/93:0A4C): found (683 ms) by sky
2010/03/10 17:48:17 19637 c03 kai (1702&000000/0032/93:7BFB): found (666 ms) by sky
2010/03/10 17:48:24 19637 c03 kai (1702&000000/0032/93:2A80): found (641 ms) by sky
2010/03/10 17:48:31 19637 c03 kai (1702&000000/0032/93:7BCA): found (659 ms) by sky
2010/03/10 17:48:38 19637 c03 kai (1702&000000/0032/93:871A): found (707 ms) by sky
2010/03/10 17:48:45 19637 c03 kai (1702&000000/0032/93:6633): found (663 ms) by sky
2010/03/10 17:48:52 19637 c03 kai (1702&000000/0032/93:509E): found (648 ms) by sky
2010/03/10 17:48:54 19484 r03 kai type=00, len=139, idx=25, cnt=1: written (254 ms)
2010/03/10 17:48:59 19637 c03 kai (1702&000000/0032/93:3259): found (665 ms) by sky
2010/03/10 17:49:02 19484 r03 kai type=d0, len=137, idx=3, cnt=2: written (678 ms)
2010/03/10 17:49:06 19637 c03 kai (1702&000000/0032/93:5EE3): found (676 ms) by sky
2010/03/10 17:49:13 19637 c03 kai (1702&000000/0032/93:25DB): found (656 ms) by sky
2010/03/10 17:49:20 19637 c03 kai (1702&000000/0032/93:7831): found (661 ms) by sky
2010/03/10 17:49:21 19484 r03 kai type=00, len=139, idx=12, cnt=2: written (262 ms)
2010/03/10 17:49:26 19484 r03 kai type=d0, len=137, idx=13, cnt=2: written (678 ms)
2010/03/10 17:49:27 19637 c03 kai (1702&000000/0032/93:A498): found (650 ms) by sky
2010/03/10 17:49:34 19637 c03 kai (1702&000000/0032/93:5AA3): found (652 ms) by sky
2010/03/10 17:49:41 19637 c03 kai (1702&000000/0032/93:8182): found (651 ms) by sky
2010/03/10 17:49:48 19637 c03 kai (1702&000000/0032/93:0030): found (650 ms) by sky
2010/03/10 17:49:55 19637 c03 kai (1702&000000/0032/93:2867): found (701 ms) by sky
2010/03/10 17:50:02 19637 c03 kai (1702&000000/0032/93:E4ED): found (649 ms) by sky
2010/03/10 17:50:09 19637 c03 kai (1702&000000/0032/93:B77A): found (639 ms) by sky
2010/03/10 17:50:16 19484 r03 kai type=d2, len=139, idx=26, cnt=1: written (624 ms)
2010/03/10 17:50:16 19637 c03 kai (1702&000000/0032/93:325E): found (732 ms) by sky
2010/03/10 17:50:23 19637 c03 kai (1702&000000/0032/93:D445): found (646 ms) by sky
2010/03/10 17:50:30 19637 c03 kai (1702&000000/0032/93:8CC4): found (685 ms) by sky
2010/03/10 17:50:34 19484 r03 kai type=00, len=139, idx=27, cnt=1: written (257 ms)
2010/03/10 17:50:37 19637 c03 kai (1702&000000/0032/93:4E06): found (671 ms) by sky
2010/03/10 17:50:39 19484 r03 kai type=d0, len=137, idx=28, cnt=1: written (686 ms)
2010/03/10 17:50:44 19637 c03 kai (1702&000000/0032/93:596E): found (649 ms) by sky
2010/03/10 17:50:45 19484 r03 kai type=00, len=139, idx=8, cnt=2: written (253 ms)
2010/03/10 17:50:51 19484 r03 kai type=d2, len=139, idx=29, cnt=1: written (625 ms)
2010/03/10 17:50:51 19637 c03 kai (1702&000000/0032/93:3D4F): found (775 ms) by sky
2010/03/10 17:50:55 19484 r03 kai type=d0, len=137, idx=30, cnt=1: written (680 ms)
2010/03/10 17:50:58 19637 c03 kai (1702&000000/0032/93:E07D): found (637 ms) by sky
2010/03/10 17:51:02 19484 r03 kai type=d2, len=139, idx=31, cnt=1: written (642 ms)
2010/03/10 17:51:05 19637 c03 kai (1702&000000/0032/93:DF31): found (658 ms) by sky
2010/03/10 17:51:11 19484 r03 kai type=00, len=139, idx=10, cnt=2: written (260 ms)
2010/03/10 17:51:12 19637 c03 kai (1702&000000/0032/93:77F3): found (646 ms) by sky
2010/03/10 17:51:17 19484 r03 kai type=d0, len=137, idx=11, cnt=2: written (678 ms)
2010/03/10 17:51:19 19637 c03 kai (1702&000000/0032/93:F81F): found (645 ms) by sky
2010/03/10 17:51:26 19637 c03 kai (1702&000000/0032/93:AB1E): found (694 ms) by sky
2010/03/10 17:51:27 19484 r03 kai type=00, len=139, idx=32, cnt=1: written (257 ms)
2010/03/10 17:51:33 19637 c03 kai (1702&000000/0032/93:636A): found (670 ms) by sky
2010/03/10 17:51:40 19637 c03 kai (1702&000000/0032/93:E301): found (718 ms) by sky
2010/03/10 17:51:47 19637 c03 kai (1702&000000/0032/93:711B): found (658 ms) by sky
2010/03/10 17:51:54 19637 c03 kai (1702&000000/0032/93:ED98): found (657 ms) by sky
2010/03/10 17:52:01 19637 c03 kai (1702&000000/0032/93:4149): found (655 ms) by sky
2010/03/10 17:52:08 19637 c03 kai (1702&000000/0032/93:C992): found (653 ms) by sky
2010/03/10 17:52:15 19637 c03 kai (1702&000000/0032/93:A338): found (646 ms) by sky
2010/03/10 17:52:22 19637 c03 kai (1702&000000/0032/93:48FF): found (645 ms) by sky
2010/03/10 17:52:29 19637 c03 kai (1702&000000/0032/93:0A3C): found (648 ms) by sky
2010/03/10 17:52:36 19637 c03 kai (1702&000000/0032/93:8E35): found (652 ms) by sky
2010/03/10 17:52:43 19637 c03 kai (1702&000000/0032/93:FF11): found (653 ms) by sky
2010/03/10 17:52:48 19484 r03 kai type=d0, len=137, idx=9, cnt=2: written (681 ms)
2010/03/10 17:52:50 19637 c03 kai (1702&000000/0032/93:8BFF): found (667 ms) by sky
2010/03/10 17:52:51 19484 r03 kai type=d2, len=139, idx=33, cnt=1: written (616 ms)
2010/03/10 17:52:54 19484 r03 kai type=00, len=139, idx=0, cnt=2: written (270 ms)
2010/03/10 17:52:57 19637 c03 kai (1702&000000/0032/93:5CDB): found (640 ms) by sky
2010/03/10 17:52:58 19484 r03 kai type=d0, len=137, idx=17, cnt=2: written (704 ms)
2010/03/10 17:53:04 19637 c03 kai (1702&000000/0032/93:7866): found (693 ms) by sky
2010/03/10 17:53:05 19484 r03 kai type=00, len=139, idx=2, cnt=2: written (276 ms)
2010/03/10 17:53:11 19637 c03 kai (1702&000000/0032/93:D627): found (650 ms) by sky
2010/03/10 17:53:13 19484 r03 kai type=d0, len=137, idx=19, cnt=2: written (665 ms)
2010/03/10 17:53:18 19637 c03 kai (1702&000000/0032/93:F379): found (698 ms) by sky
2010/03/10 17:53:20 19484 r03 kai type=00, len=139, idx=12, cnt=3: written (261 ms)
2010/03/10 17:53:25 19637 c03 kai (1702&000000/0032/93:E196): found (659 ms) by sky
2010/03/10 17:53:32 19637 c03 kai (1702&000000/0032/93:10EE): found (656 ms) by sky
2010/03/10 17:53:39 19637 c03 kai (1702&000000/0032/93:2EC5): found (640 ms) by sky
2010/03/10 17:53:46 19637 c03 kai (1702&000000/0032/93:8655): found (657 ms) by sky
2010/03/10 17:53:53 19637 c03 kai (1702&000000/0032/93:3013): found (689 ms) by sky
2010/03/10 17:54:00 19637 c03 kai (1702&000000/0032/93:1507): found (649 ms) by sky
2010/03/10 17:54:07 19637 c03 kai (1702&000000/0032/93:E3C1): found (704 ms) by sky
2010/03/10 17:54:14 19637 c03 kai (1702&000000/0032/93:3BC1): found (697 ms) by sky
2010/03/10 17:54:21 19637 c03 kai (1702&000000/0032/93:F0FD): found (683 ms) by sky
2010/03/10 17:54:28 19637 c03 kai (1702&000000/0032/93:FADC): found (710 ms) by sky
2010/03/10 17:54:35 19637 c03 kai (1702&000000/0032/93:79E5): found (651 ms) by sky
2010/03/10 17:54:42 19637 c03 kai (1702&000000/0032/93:695C): found (636 ms) by sky
2010/03/10 17:54:48 19484 r03 kai type=d0, len=137, idx=1, cnt=2: written (525 ms)
2010/03/10 17:54:49 19637 c03 kai (1702&000000/0032/93:DC2F): found (652 ms) by sky
2010/03/10 17:54:56 19637 c03 kai (1702&000000/0032/93:95D8): found (644 ms) by sky
2010/03/10 17:54:56 19484 r03 kai type=00, len=139, idx=25, cnt=2: written (283 ms)
2010/03/10 17:55:03 19637 c03 kai (1702&000000/0032/93:6DEE): found (658 ms) by sky
2010/03/10 17:55:06 19484 r03 kai type=d0, len=137, idx=3, cnt=3: written (684 ms)
2010/03/10 17:55:10 19637 c03 kai (1702&000000/0032/93:F9F2): found (640 ms) by sky
2010/03/10 17:55:10 19484 r03 kai type=00, len=139, idx=10, cnt=3: written (256 ms)
2010/03/10 17:55:17 19637 c03 kai (1702&000000/0032/93:9ED8): found (654 ms) by sky
2010/03/10 17:55:18 19484 r03 kai type=d0, len=137, idx=11, cnt=3: written (692 ms)
2010/03/10 17:55:24 19637 c03 kai (1702&000000/0032/93:779D): found (650 ms) by sky
2010/03/10 17:55:24 19484 r03 kai type=00, len=139, idx=32, cnt=2: written (256 ms)
2010/03/10 17:55:31 19637 c03 kai (1702&000000/0032/93:CFC5): found (699 ms) by sky
2010/03/10 17:55:35 19484 r03 kai type=d0, len=137, idx=28, cnt=2: written (671 ms)
2010/03/10 17:55:38 19637 c03 kai (1702&000000/0032/93:B31E): found (651 ms) by sky
2010/03/10 17:55:42 19484 r03 kai type=00, len=139, idx=34, cnt=1: written (273 ms)
2010/03/10 17:55:45 19637 c03 kai (1702&000000/0032/93:58A7): found (654 ms) by sky
2010/03/10 17:55:52 19637 c03 kai (1702&000000/0032/93:8CF2): found (655 ms) by sky
2010/03/10 17:55:59 19637 c03 kai (1702&000000/0032/93:104F): found (666 ms) by sky
2010/03/10 17:56:06 19637 c03 kai (1702&000000/0032/93:991A): found (698 ms) by sky
2010/03/10 17:56:13 19637 c03 kai (1702&000000/0032/93:94E1): found (652 ms) by sky
2010/03/10 17:56:20 19637 c03 kai (1702&000000/0032/93:22C0): found (699 ms) by sky
2010/03/10 17:56:27 19637 c03 kai (1702&000000/0032/93:199D): found (650 ms) by sky
2010/03/10 17:56:34 19637 c03 kai (1702&000000/0032/93:BFEC): found (655 ms) by sky
2010/03/10 17:56:41 19637 c03 kai (1702&000000/0032/93:7DDD): found (648 ms) by sky
2010/03/10 17:56:43 19484 r03 kai type=00, len=139, idx=8, cnt=3: written (262 ms)
2010/03/10 17:56:48 19637 c03 kai (1702&000000/0032/93:7B1E): found (646 ms) by sky
2010/03/10 17:56:55 19637 c03 kai (1702&000000/0032/93:68B9): found (678 ms) by sky
2010/03/10 17:56:58 19484 r03 kai type=00, len=139, idx=2, cnt=3: written (260 ms)
2010/03/10 17:57:02 19637 c03 kai (1702&000000/0032/93:A587): found (681 ms) by sky
2010/03/10 17:57:09 19637 c03 kai (1702&000000/0032/93:7873): found (655 ms) by sky
2010/03/10 17:57:16 19637 c03 kai (1702&000000/0032/93:6BFF): found (655 ms) by sky
2010/03/10 17:57:17 19484 r03 kai type=d0, len=137, idx=21, cnt=2: written (515 ms)
2010/03/10 17:57:23 19637 c03 kai (1702&000000/0032/93:8B21): found (671 ms) by sky
2010/03/10 17:57:30 19637 c03 kai (1702&000000/0032/93:3B9E): found (634 ms) by sky
2010/03/10 17:57:30 19484 r03 kai type=00, len=139, idx=5, cnt=3: written (261 ms)
2010/03/10 17:57:37 19637 c03 kai (1702&000000/0032/93:5D03): found (656 ms) by sky
2010/03/10 17:57:44 19637 c03 kai (1702&000000/0032/93:7B09): found (664 ms) by sky
moin helle,
...glaub wenn der default-Wert "no" ist dann drauchst den nicht noch mal eintragen, da er ja sowiso auf "no" steht.
# default: no
#
DISABLE EMM : no
AU konnt ich leider noch nicht testen da meine Karte schon "scharf" ist.
Gruß...fire113
dieht das AU für S*Y zufällig so im OScam.log aus:
Also dieses written?Code:10/03/13 16:13:05 31952 r03 kai type=d2, len=139, idx=12, cnt=3: written (617 ms)
2010/03/13 16:13:09 31980 c05 kai (1702&000000/0011/93:36BE): found (606 ms) by sky
2010/03/13 16:13:16 31980 c05 kai (1702&000000/0011/93:265D): found (583 ms) by sky
2010/03/13 16:13:23 31980 c05 kai (1702&000000/0011/93:A643): found (581 ms) by sky
2010/03/13 16:13:30 31980 c05 kai (1702&000000/0011/93:E759): found (594 ms) by sky
2010/03/13 16:13:37 31980 c05 kai (1702&000000/0011/93:C5F0): found (622 ms) by sky
2010/03/13 16:13:44 31980 c05 kai (1702&000000/0011/93:EC8B): found (593 ms) by sky
2010/03/13 16:13:51 31980 c05 kai (1702&000000/0011/93:C1DE): found (582 ms) by sky
2010/03/13 16:13:58 31980 c05 kai (1702&000000/0011/93:DCE9): found (578 ms) by sky
2010/03/13 16:14:05 31980 c05 kai (1702&000000/0011/93:3BC2): found (579 ms) by sky
2010/03/13 16:14:12 31980 c05 kai (1702&000000/0011/93:46C1): found (596 ms) by sky
2010/03/13 16:14:19 31980 c05 kai (1702&000000/0011/93:0ED7): found (625 ms) by sky
2010/03/13 16:14:26 31980 c05 kai (1702&000000/0011/93:6E84): found (580 ms) by sky
2010/03/13 16:14:33 31980 c05 kai (1702&000000/0011/93:EF7E): found (589 ms) by sky
2010/03/13 16:14:40 31980 c05 kai (1702&000000/0011/93:E934): found (616 ms) by sky
2010/03/13 16:14:44 31952 r03 kai type=d2, len=139, idx=3, cnt=2: written (679 ms)
2010/03/13 16:14:47 31980 c05 kai (1702&000000/0011/93:4DA3): found (581 ms) by sky
2010/03/13 16:14:54 31980 c05 kai (1702&000000/0011/93:9BA5): found (580 ms) by sky
2010/03/13 16:15:01 31980 c05 kai (1702&000000/0011/93:81EF): found (606 ms) by sky
2010/03/13 16:15:08 31980 c05 kai (1702&000000/0011/93:4D47): found (596 ms) by sky
2010/03/13 16:15:15 31980 c05 kai (1702&000000/0011/93:5027): found (589 ms) by sky
2010/03/13 16:15:22 31980 c05 kai (1702&000000/0011/93:D4CB): found (584 ms) by sky
2010/03/13 16:15:25 31952 r03 kai type=00, len=139, idx=26, cnt=3: written (266 ms)
2010/03/13 16:15:29 31980 c05 kai (1702&000000/0011/93:EE4B): found (579 ms) by sky
2010/03/13 16:15:36 31980 c05 kai (1702&000000/0011/93:46B7): found (585 ms) by sky
2010/03/13 16:15:43 31980 c05 kai (1702&000000/0011/93:D980): found (581 ms) by sky
2010/03/13 16:15:50 31980 c05 kai (1702&000000/0011/93:E4BD): found (613 ms) by sky
2010/03/13 16:15:57 31980 c05 kai (1702&000000/0011/93:4BA3): found (605 ms) by sky
2010/03/13 16:16:04 31980 c05 kai (1702&000000/0011/93:88F0): found (606 ms) by sky
2010/03/13 16:16:11 31980 c05 kai (1702&000000/0011/93:6395): found (635 ms) by sky
2010/03/13 16:16:18 31980 c05 kai (1702&000000/0011/93:CB65): found (585 ms) by sky
2010/03/13 16:16:25 31980 c05 kai (1702&000000/0011/93:B55E): found (589 ms) by sky
2010/03/13 16:16:27 31952 r03 kai type=d2, len=139, idx=37, cnt=1: written (758 ms)
2010/03/13 16:16:32 31980 c05 kai (1702&000000/0011/93:863E): found (591 ms) by sky
2010/03/13 16:16:39 31980 c05 kai (1702&000000/0011/93:5CAB): found (585 ms) by sky
2010/03/13 16:16:46 31980 c05 kai (1702&000000/0011/93:338E): found (590 ms) by sky
2010/03/13 16:16:53 31980 c05 kai (1702&000000/0011/93:D52D): found (585 ms) by sky
2010/03/13 16:17:00 31980 c05 kai (1702&000000/0011/93:F5BF): found (590 ms) by sky
2010/03/13 16:17:07 31980 c05 kai (1702&000000/0011/93:A4C4): found (576 ms) by sky
2010/03/13 16:17:10 31952 r03 kai type=d2, len=139, idx=38, cnt=1: written (623 ms)
2010/03/13 16:17:14 31980 c05 kai (1702&000000/0011/93:7D87): found (593 ms) by sky
2010/03/13 16:17:21 31980 c05 kai (1702&000000/0011/93:9059): found (575 ms) by sky
2010/03/13 16:17:28 31980 c05 kai (1702&000000/0011/93:513B): found (582 ms) by sky
2010/03/13 16:17:35 31980 c05 kai (1702&000000/0011/93:A5F6): found (589 ms) by sky
2010/03/13 16:17:40 31952 r03 kai type=d2, len=139, idx=5, cnt=3: written (622 ms)
2010/03/13 16:17:42 31980 c05 kai (1702&000000/0011/93:3B20): found (583 ms) by sky
2010/03/13 16:17:49 31980 c05 kai (1702&000000/0011/93:DB29): found (613 ms) by sky
Und kann die CCcam nun AU für HD+ oder nicht?
Hab mal gelesen es gibt einen SD Sender der aber auch die Updates für HD+ sendet oder so??? Also das ich auch mit der dbox die AU`s empfangen kann?
Moin Helle,
...ja, der besagte "."<--Punktsender ABER es sollten ja eigentlich ALLE HD-Plus-Sender Updates rausdrücken. Wär doch zu blöd wenn Du für ein Update auf SD umschalten mußt.
Gruß fire113
EDIT--> etwas lasch ausgedrückt :) Deine HD-Box schiebt die EMM´s weiter auf die Dbox2 und da wird dann ein Update auf der HDPlus-Karte gemacht. Auf dem Punktsender sollte es dann direkt mit der Dbox2 funzen, kein Plan ob´s mit dem Cardreader oder nur im Multicam funzt mußt mal testen, good luck.
Hab mal den Cardreader von 3,5x auf 3,6x umgestellt --> found (369 ms) vorher hatte ich ~450 ms
Zitat:
Zitat von Helle85
haste vll frequenz von dem sender?
Hatte mir neue Channels mit dem BouquetWizzard gesogen, mußte aber neue Image flashen und die alten Setings waren daher auch wech.
Teste mal --> Astra 19,2 E Frequenz 12246 V 27500.
Ansonsten BouquetWizzard und updaten via Web, brauchst den Punktsender mit 1830 bzw. auf der Frequenz 12246 V.
Good luck...fire113
Zitat:
Zitat von Helle85
Kann mir jemand sagen was mit "Port problem" genau gemeint ist?
Oscam spuckt das hier nämlich aus:
Und das kommando "written" heist das ein AU gemacht wurde oder?Code:2010/03/15 12:05:23 31110 r03 kai type=d0, len=137, idx=10, cnt=1: written (678 ms)
2010/03/15 12:05:23 31110 r03 kai type=00, len=139, idx=11, cnt=1: written (273 ms)
2010/03/15 13:28:38 31104 s client(2) connect from 192.168.2.106 (pid=10134, pipfd=34)
2010/03/15 13:28:38 31104 s client(3) connect from 192.168.2.106 (pid=10135, pipfd=35)
2010/03/15 13:28:38 10134 c02 encrypted newcamd:34000-client 192.168.2.106 granted (steven, au=hd+)
2010/03/15 13:28:38 10134 c02 user steven authenticated successfully (using client 6D67)
2010/03/15 13:28:38 10134 c02 AU wont be used on this port -> disable AU
2010/03/15 13:28:38 10135 c03 encrypted newcamd:34001-client 192.168.2.106 granted (steven, au=hd+)
2010/03/15 13:28:38 10135 c03 user steven authenticated successfully (using client 6D67)
2010/03/15 13:28:38 10135 c03 AU wont be used on this port -> disable AU
2010/03/15 13:29:20 10134 c02 steven (1702&000000/007F/93:B571): not found (712 ms)
2010/03/15 13:30:04 10134 c02 Connection closed to client
2010/03/15 13:30:04 10134 c02 steven disconnected from 192.168.2.106
2010/03/15 13:30:04 10135 c03 Connection closed to client
2010/03/15 13:30:04 10135 c03 steven disconnected from 192.168.2.106
2010/03/15 13:33:34 31104 s client(2) connect from 192.168.2.106 (pid=10429, pipfd=34)
2010/03/15 13:33:34 31104 s client(3) connect from 192.168.2.106 (pid=10430, pipfd=35)
2010/03/15 13:33:34 10429 c02 encrypted newcamd:34000-client 192.168.2.106 granted (steven, au=hd+)
2010/03/15 13:33:34 10429 c02 user steven authenticated successfully (using client 6D67)
2010/03/15 13:33:34 10429 c02 AU wont be used on this port -> disable AU
2010/03/15 13:33:34 10430 c03 encrypted newcamd:34001-client 192.168.2.106 granted (steven, au=hd+)
2010/03/15 13:33:34 10430 c03 user steven authenticated successfully (using client 6D67)
2010/03/15 13:33:34 10430 c03 AU wont be used on this port -> disable AU
2010/03/15 13:34:17 10429 c02 steven (1702&000000/007F/93:1592): not found (652 ms)
2010/03/15 13:34:22 10430 c03 steven (1801&000000/007F/89:DC26): not found (220 ms)
2010/03/15 13:34:25 10429 c02 steven (1702&000000/007F/93:402B): not found (682 ms)
AU Einstellung falsch und not found heißt, es wird kein ECM übertragen, also eigentlich alles nicht in Ordnung
not found macht nix, war nur keine karte drinne in dem moment! läuft schon alles :icon_thumright:
Kann hier jemand vll über dei configs schauen, stimmt soweit denk ich aber AU für HD+ macht wie oben beschrieben zicken:
oscam.config
#
# main configuration
#
[global]
nice = -1
WaitForCards = 1
preferlocalcards = 1
ClientTimeout = 5
LogFile = stdout
Level = 15
CacheDelay = 120
logfile = /var/tmp/oscam.log
maxlogsize = 20
# logging
#pidfile = /var/tmp/oscam.pid
#logfile = /var/tmp/oscam.log
#usrfile = /var/tmp/oscamuser.log
#cwlogdir = /var/tmp/cw
# protocols
[newcamd]
key = 0102030405060708091011121314
port = 34000@1702:000000;34001@1801:000000
oscam.server
#
# reader configuration
#
# serial reader
[reader]
label = Sky
Protocol = mouse
detect = CD
device = /dev/tts/1
group = 1
emmcache = 1,3,2
mhz = 600
cardmhz = 600
deprecated = 0
Ident = 1702:000000
CAID = 1702
AU=1
[reader]
label = HD+
Protocol = mouse
detect = CD
device = /dev/tts/0
group = 2
emmcache = 1,3,2
n3_rsakey = Bxxx5
n3_boxkey = AxxxC
mhz = 368
cardmhz = 368
CAID = 1801&FFFF:1830
AU=1
oscam.user
[account]
Group=1
User=kai
Pwd=kai
CAID=1702
AU=Sky
[account]
Group = 1,2
User = steven
Pwd = steven
CAID = 1702,1801
AU=HD+
Und für was sind die groups in den readern? Egal ob ich beide 1 hab oder einer 1 und der andere 2, geht beides!?
EDIT: Noch ein prob, wenn ich bei dem Serveraccount AU=1 eintrage, sollte er ja ALLE reader behandeln, aber im log kommt da nur
Müsste da nicht noch der andere reader(label=hd+) drinne stehen???Code:2010/03/15 20:08:47 2683 c04 encrypted newcamd:34000-client 127.0.0.1 granted (kai, au(auto)=s*y)
Und wenn ich AU=1 bei mir eintrage kommt das hier:
Code:2010/03/15 20:32:33 4228 c01 encrypted newcamd:34000-client 192.168.2.106 granted (steven, au(auto)=sky)
2010/03/15 20:32:33 4228 c01 user steven authenticated successfully (using client 6D67)
2010/03/15 20:32:33 4228 c01 AU flag 0 for user steven
2010/03/15 20:32:33 4229 c03 encrypted newcamd:34001-client 192.168.2.106 granted (steven, au(auto)=0)
2010/03/15 20:32:33 4229 c03 user steven authenticated successfully (using client 6D67)
2010/03/15 20:32:33 4229 c03 AU disabled for user steven
2010/03/15 20:32:33 4229 c03 Got sigpipe signal -> captured
2010/03/15 20:32:33 4228 c01 Got sigpipe signal -> captured
2010/03/15 20:32:34 4169 c02 kai (1702&000000/0009/93:9752): found (626 ms) by sky
2010/03/15 20:32:44 4144 s client(1) connect from 192.168.2.106 (pid=4242, pipfd=40)
2010/03/15 20:32:44 4144 s client(3) connect from 192.168.2.106 (pid=4243, pipfd=42)
2010/03/15 20:32:44 4242 c01 encrypted newcamd:34000-client 192.168.2.106 granted (steven, au(auto)=sky)
2010/03/15 20:32:44 4242 c01 user steven authenticated successfully (using client 6D67)
2010/03/15 20:32:44 4242 c01 AU flag 0 for user steven
2010/03/15 20:32:44 4243 c03 encrypted newcamd:34001-client 192.168.2.106 granted (steven, au(auto)=0)
2010/03/15 20:32:44 4243 c03 user steven authenticated successfully (using client 6D67)
2010/03/15 20:32:44 4243 c03 AU disabled for user steven
Sorry wenn ich das hier nochmal pushe aber was heist das hier:
6524 c04 encrypted newcamd:34001-client 127.0.0.1 granted (kai, au=hd+)
2010/03/19 16:13:24 6524 c04 user kai authenticated successfully (using client 4343)
2010/03/19 16:13:24 6524 c04 AU wont be used on this port -> disable AU
???
Moin Helle,
...daß AU auf diesem Port nicht benutzt bzw. unterstützt wird und daher abgeschaltet.
Gruß fire113
Zitat:
Zitat von Helle85
Welche Versionen benutzt ihr zur zeit eigetnlich von der Oscam?
Hat sich schon einiges getan oder kann ich immer noch bei der
version=0.99.4-SB-Alno, build #1656 bleiben?
GEht mittlerweile überhaupt AU für HD+ in welcher konstelation auch immer?
...1828 damit hab ich um die ~350ms.
Gruß fire113
Zitat:
Zitat von Helle85
so, hab jetzt 1892 von alno druaf, hat sich ein wenig was getan, nun kommt folgendes im log:
kann mir vll jemand erklären ob nun in dieser zeile:Code:2010/03/25 22:10:43 20044 r03 [irdeto-reader] ready for requests
2010/03/25 22:10:44 20070 c01 steven (1702&000000/0011/93:DB35): found (968 ms) by sky
2010/03/25 22:10:45 20070 c01 steven (1702&000000/0011/93:DBC1): found (577 ms) by sky
2010/03/25 22:10:45 20039 s client(3) connect from 127.0.0.1 (pid=20079, pipfd=34)
2010/03/25 22:10:45 20079 c03 encrypted newcamd:34001-client 127.0.0.1 granted (kai, au(auto)=hd+)
2010/03/25 22:10:45 20079 c03 user kai authenticated successfully (using client 4343)
2010/03/25 22:10:45 20079 c03 AU enabled for user kai on reader hd+
2010/03/25 22:10:50 20039 s client(4) connect from 127.0.0.1 (pid=20086, pipfd=35)
2010/03/25 22:10:51 20086 c04 encrypted newcamd:34000-client 127.0.0.1 granted (kai, au(auto)=sky)
2010/03/25 22:10:51 20086 c04 user kai authenticated successfully (using client 4343)
2010/03/25 22:10:51 20086 c04 AU enabled for user kai on reader sky
2010/03/25 22:10:51 20070 c01 steven (1702&000000/0011/93:4731): found (600 ms) by sky
2010/03/25 22:10:56 20086 c04 kai (1702&000000/0011/93:4731): cache1 (124 ms)
2010/03/25 22:10:58 20070 c01 steven (1702&000000/0011/93:C2E7): found (581 ms) by sky
2010/03/25 22:10:58 20086 c04 kai (1702&000000/0011/93:C2E7): cache2 (593 ms)
2010/03/25 22:11:05 20070 c01 steven (1702&000000/0011/93:3F46): found (577 ms) by sky
2010/03/25 22:11:05 20086 c04 kai (1702&000000/0011/93:3F46): cache2 (604 ms)
2010/03/25 22:11:12 20070 c01 steven (1702&000000/0011/93:01E0): found (580 ms) by sky
2010/03/25 22:11:12 20086 c04 kai (1702&000000/0011/93:01E0): cache2 (593 ms)
2010/03/25 22:11:19 20086 c04 kai (1702&000000/0011/93:4BFC): found (599 ms) by sky
2010/03/25 22:11:19 20070 c01 steven (1702&000000/0011/93:4BFC): cache2 (586 ms)
2010/03/25 22:11:26 20070 c01 steven (1702&000000/0011/93:B6E7): found (585 ms) by sky
2010/03/25 22:11:26 20086 c04 kai (1702&000000/0011/93:B6E7): cache2 (613 ms)
2010/03/25 22:11:33 20086 c04 kai (1702&000000/0011/93:E132): found (599 ms) by sky
2010/03/25 22:11:33 20070 c01 steven (1702&000000/0011/93:E132): cache2 (608 ms)
2010/03/25 22:11:40 20079 c03 kai (1830&003411/277E/92:AA9B): found (395 ms) by hd+
2010/03/25 22:11:40 20070 c01 steven (1702&000000/0011/93:CE27): found (653 ms) by sky
2010/03/25 22:11:43 20079 c03 kai (1830&003411/277E/92:7979): found (379 ms) by hd+
2010/03/25 22:11:47 20070 c01 steven (1702&000000/0011/93:9845): found (580 ms) by sky
2010/03/25 22:11:50 20079 c03 kai (1830&003411/277E/92:2AA5): found (370 ms) by hd+
2010/03/25 22:11:51 20044 r03 steven emmtype=shared, len=139, idx=0, cnt=1: written (745 ms) by sky
2010/03/25 22:11:54 20070 c01 steven (1702&000000/0011/93:D5DD): found (589 ms) by sky
2010/03/25 22:11:57 20079 c03 kai (1830&003411/277E/92:774F): found (367 ms) by hd+
2010/03/25 22:12:01 20070 c01 steven (1702&000000/0011/93:757C): found (601 ms) by sky
2010/03/25 22:12:04 20079 c03 kai (1830&003411/277E/92:2934): found (368 ms) by hd+
2010/03/25 22:12:08 20070 c01 steven (1702&000000/0011/93:324A): found (597 ms) by sky
2010/03/25 22:12:11 20079 c03 kai (1830&003411/277E/92:4237): found (378 ms) by hd+
2010/03/25 22:12:15 20070 c01 steven (1702&000000/0011/93:38A8): found (577 ms) by sky
2010/03/25 22:12:18 20079 c03 kai (1830&003411/277E/92:7E88): found (402 ms) by hd+
2010/03/25 22:12:22 20070 c01 steven (1702&000000/0011/93:3620): found (576 ms) by sky
2010/03/25 22:12:25 20079 c03 kai (1830&003411/277E/92:3AD6): found (406 ms) by hd+
2010/03/25 22:12:26 20044 r03 steven emmtype=shared, len=139, idx=1, cnt=1: written (618 ms) by sky
2010/03/25 22:12:29 20070 c01 steven (1702&000000/0011/93:F4C7): found (578 ms) by sky
2010/03/25 22:12:32 20079 c03 kai (1830&003411/277E/92:64E6): found (370 ms) by hd+
emmtype=shared, len=139, idx=1, cnt=1: written (618 ms) by sky
das AU durchgeführt wird? Und warum steht da nun "emmtype=shared" ?
Versteh die ganze zeile nicht wirklich aber hab mal glaub gelesen das dieser teil mit written für AU steht!?
Leider tut sich bei HD+ da immer nocht nicht.
Hab übrigends bei den readern
emmcache = 1,3,15
geändert, erst dann wurde diese zeile geschrieben. Die info hab ich aus dem SB Board weil sich seit REV. 18.. was getan haben soll in dieser hinnsicht:durcheinander-ersta
Ich habe mal eine Frage:
Ich habe mir eine Coolstream HD1 zugelegt, die neben meinen Kathis auf meinen alten (aber top stabilen) MPCS 0.9 Server auf einer DBox2 zugreifen bzw. ich share damit eine Sky S02 Karte im Homenetz.
Da ich jetzt eine DBox2 über habe und ich meine andere DBox mit MPCS nicht anfassen will (habe halt keinen Bock auf Stress) möchte ich diese als HD+Server einrichten.
Ich habe diesen Thread aufmerksam gelesen (denke ich zumindest) und habe das so verstanden, dass sowohl die µmouse als auch das Megakom MC (wozu ich tendiere) mit Oscam laufen.
Auf meinen Kathis ist Camd3 installiert, auf der Coolstream Mgcamd (Camd3 läuft darauf nicht)das sich per newcamd-protokoll zu meinem MPCS-Server für Sky verbindet (die Kathis per Camd3).
Kann das funktionieren, dass sich die Kathis durch eine zusätzliche Line in der Camd3-Server und die Coolstream per zusätzlicher Line in der newcamd.list zu meinem -dann 2. Oscam Server verbinden?
Oder ist es sogar möglich die Coolstream, in der ja die HD+-Karte im internen Schacht eh läuft und auch Oscam läuft, die gleichzeitig als HD+-Server für meine Kathis zu nutzen?
Dann könnte ich mir die 2. DBox sogar komplett sparen!
Danke
habe mir die Antwort selbst gegeben - funzt mit Coolstream als Server mit Oscam und HD+ oder auch S02 Karte im internen Schacht. Auf den Clienten kann wahlweise Camd3 oder Mgcamd installiert sein
kann mir jemand eine tip geben woher ich ein umouse bekomme?
Oder funktioniert HD+ nun schon mit MC?
MC geht schon lange, siehe mal hier:
http://www.spinnes-board.de/vb/showp...&postcount=121
In Post Nr. 117 findest du die passenden Config für HD+
Boxkey + RSA mußt du noch einfügen, google z.B. noch ump2002
geht bei mir leider immer noch nicht.
hab die drei datein so geänder wie im Posting 117 und bekomm folgenden log eintrag...
-------------------------------------------------------------------------------
>> OSCam << cardserver started at Thu Jan 1 02:00:36 1970
-------------------------------------------------------------------------------
1970/01/01 2:00:36 363 s version=0.99.4svn, build #2046, system=powerpc-dbox2-linux, nice=-1
1970/01/01 2:00:36 363 s max. clients=29, client max. idle=120 sec
1970/01/01 2:00:36 363 s max. logsize=unlimited
1970/01/01 2:00:36 363 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
1970/01/01 2:00:36 363 s shared memory initialized (size=554600, fd=3)
1970/01/01 2:00:36 363 s auth size=4752
1970/01/01 2:00:36 363 s services reloaded: 0 services freed, 3 services loaded
Moin weisnet,
...geht auch mit anderen Cardreadern, habs auch mit meinem alten Cardmaestro geschafft. Im Mouse oder Phoenix-Mode is egal!
Wie? Was? Mehr nicht? Glaub der ist toooooooooooo short!Zitat:
Zitat von weisnet
Blätter mal paar Seiten zurück, hatte auch paar Logs geupped.
Ich Breitbirne hatte z.B. DEN EXTERNEN READER nicht scharf geschaltet:mamo0180:
Oscam sollte zumindest mekkern bezüglich Karte bzw. Reader, passen Deine Daten auch wirklich? <-- Die kannst ja mal uppen.
Gruß und bis neulich dann...fire113Zitat:
Zitat von weisnet
Ja eben versteh das auch nicht. kann das evtl an der Bild liegen? Ich lese hier immer was von 1794....
habs vorher auch schon über eine Cas 3 im entsprechenden Modus versucht. Bei S*Y ging das ohne Probleme allerdings mit dem MPCS.
kenn ich mit dem Oscam nicht so wirklich aus...
ich hab eine nokia dbox2 mit einem Multicam Rev2 (AHAB2)
damit share ich s*y an 2 kahti 910 im Homeshare mit ccam
welchen (externen)reader brauche ich jetzt um mit der selben dbox2 auch noch hd+ zu sharen
könnt ihr mir einen perfekten reader für hd+ empfehlen (bitte genaue bezeichnung)
mit dem umouse solls gehen... wollt mir auch einen Kaufen wil ich das über die anderen nicht hinbekommen...
kann den aber nirgends finden.
Die umouse gibt/gab es wohl exclusiv bei "hm-sat-shop". Im Moment finde ich die nicht in deren Sortiment, evtl. kann man dort eine Mail schreiben und fragen ob und ab wann diese wieder lieferbar ist.
Zudem funktioniert auch das Multicam 3.0 bei mir ohne Probleme (DBox2 von Philips). Auch habe ich gerade mal die neuste Oscam 2046 (dbox2-tuxbox) getestet und läuft einwandfrei.
@weisnet
hast du das Multicam auch auf 3.68 Mhz gestellt ?
Zudem ist dein Log unvollständig, du mußt auch noch den Rest posten um zu sehen ob überhaupt das MC angesprochen wird.
Poste auch mal den Inhalt deiner Configs, aber ohne Box - und RSA-Key.
@Dirk01
das ist alles es gibt keinen Rest mehr vom Log...
Die MC ist auf 3,68 mhz eingestellt und ich hab die hier.
http://www.mega-kom.de/eshop/product...ducts_id/11434
werd morgen mal den MPCS drauf tun nur um die MC zu testen...
So sollte der Log mit dem Multicam aussehen:
Code:MD-Image - Philips D-BOX2 - Kernel 2.4.37.7-dbox2 (22:21:53)...
dbox login: root
BusyBox v1.14.4 (2009-12-06 11:20:59 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.
/var # killall -9 oscam
/var # oscam
Warning: keyword 'level' in global section not recognized
2010/05/06 22:22:23 565 s >> OSCam << cardserver started version 0.99.4svn
, build #2046 (powerpc-tuxbox-linux)
2010/05/06 22:22:23 565 s version=0.99.4svn-gbx-5.8, build #2046, system=po
werpc-dbox2-linux, nice=-1
2010/05/06 22:22:23 565 s max. clients=29, client max. idle=120 sec
2010/05/06 22:22:23 565 s max. logsize=unlimited
2010/05/06 22:22:23 565 s client timeout=5000 ms, fallback timeout=2500 ms,
cache delay=120 ms
2010/05/06 22:22:23 565 s shared memory initialized (size=625912, fd=3)
2010/05/06 22:22:23 565 s auth size=4752
2010/05/06 22:22:23 565 s services reloaded: 0 services freed, 1 services l
oaded
2010/05/06 22:22:23 565 s userdb reloaded: 0 accounts freed, 5 accounts loa
ded, 0 expired, 0 disabled
2010/05/06 22:22:23 565 s signal handling initialized (type=sysv)
2010/05/06 22:22:23 565 s oscam.srvid loading failed, old format
2010/05/06 22:22:23 565 s monitor: disabled
2010/05/06 22:22:23 565 s camd 3.3x: disabled
2010/05/06 22:22:23 565 s camd 3.5x: disabled
2010/05/06 22:22:23 565 s cs378x: disabled
2010/05/06 22:22:23 565 s newcamd: initialized (fd=6, port=30100, crypted)
2010/05/06 22:22:23 565 s CAID: 1830
2010/05/06 22:22:23 565 s provid #0: 003411
2010/05/06 22:22:23 565 s provid #1: 008011
2010/05/06 22:22:23 565 s cccam: disabled
2010/05/06 22:22:23 565 s radegast: disabled
2010/05/06 22:22:23 565 s client resolver thread started
2010/05/06 22:22:23 565 s logger started (pid=568)
2010/05/06 22:22:23 565 s resolver thread started
2010/05/06 22:22:23 565 s http started (pid=570)
2010/05/06 22:22:23 565 s reader started (pid=571, device=/dev/tts/1, detec
t=cd, mhz=368, cardmhz=368)
2010/05/06 22:22:23 565 s waiting for local card init
2010/05/06 22:22:23 570 h HTTP Server listening on port 0
2010/05/06 22:22:25 571 r02 card detected
2010/05/06 22:22:30 571 r02 ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53
50 31 34 32 20 52 65 76 47 43 34 63
2010/05/06 22:22:31 571 r02 Maximum frequency for this card is formally 5 Mhz
, clocking it to 3.68 Mhz
2010/05/06 22:22:32 571 r02 detect native NAGRA card T1 protocol
2010/05/06 22:22:33 571 r02 -----------------------------------------
2010/05/06 22:22:33 571 r02 |id |tier |valid from |valid to |
2010/05/06 22:22:33 571 r02 +----+--------+------------+------------+
2010/05/06 22:22:33 571 r02 |8011|0064 |2010/01/27 |2011/01/28 |
2010/05/06 22:22:33 571 r02 |8011|0065 |2010/05/03 |2011/05/04 |
2010/05/06 22:22:33 571 r02 -----------------------------------------
2010/05/06 22:22:34 571 r02 ROM: D N A S P 1 4 2
2010/05/06 22:22:34 571 r02 REV: R e v G C 4
2010/05/06 22:22:34 571 r02 SER: xx xx xx xx
2010/05/06 22:22:34 571 r02 CAID: 1830
2010/05/06 22:22:34 571 r02 Prv.ID: 00 00 34 11 (sysid)
2010/05/06 22:22:34 571 r02 Prv.ID: 00 00 00 00
2010/05/06 22:22:34 571 r02 Prv.ID: 00 00 80 11
2010/05/06 22:22:34 571 r02 [nagra-reader] ready for requests
2010/05/06 22:22:35 565 s init for all local cards done
2010/05/06 22:22:35 565 s anti cascading disabled
2010/05/06 22:22:35 565 s dvbapi disabled
2010/05/06 22:22:35 565 s client(1) connect from 127.0.0.1 (pid=572, pipfd=
14)
2010/05/06 22:22:35 572 c01 Connection closed to client
2010/05/06 22:22:41 565 s client(1) connect from 127.0.0.1 (pid=573, pipfd=
14)
2010/05/06 22:22:41 573 c01 encrypted newcamd:30100-client 127.0.0.1 granted
(hdplus, au=hdplus)
2010/05/06 22:22:41 573 c01 user hdplus authenticated successfully (using cli
ent 4343)
2010/05/06 22:22:41 573 c01 AU flag 0 for user hdplus
2010/05/06 22:22:46 571 r02 hdplus emmtype=global, len=150, idx=0, cnt=1: wri
tten (541 ms) by hdplus
2010/05/06 22:22:50 571 r02 hdplus emmtype=global, len=150, idx=1, cnt=1: wri
tten (536 ms) by hdplus
2010/05/06 22:22:58 571 r02 hdplus emmtype=global, len=150, idx=2, cnt=1: wri
tten (544 ms) by hdplus
2010/05/06 22:22:59 565 s cardserver down
/var #
Hier noch mal die richtigen Configs ohne Box/RSA-Key:
oscam.user:
[account]
user = hdplus
pwd = hdplus
group = 1
IDENT= 1830:003411
au = HDplus
CAID = 1830
oscam.server
[reader]
label = HDplus
Protocol = mouse
detect = CD
device = /dev/tts/1
group = 1
emmcache = 1,3,2
n3_rsakey = BFxxxD5
n3_boxkey = A7xxx
mhz = 368
cardmhz = 368
deprecated = 0
CAID = 1830
oscam.conf:
[global]
nice = -1
WaitForCards = 1
preferlocalcards = 1
ClientTimeout = 5
LogFile = stdout
Level = 15
CacheDelay = 120
#[monitor]
#port = 988
#aulow = 120
#monlevel = 1
# protocols
#[camd35]
#Port = 3333
[newcamd]
key = 0102030405060708091011121314
port = 30100@1830:003411,008011
die N-Zeile in der CCcam.cfg:
N: 127.0.0.1 30100 hdplus hdplus 01 02 03 04 05 06 07 08 09 10 11 12 13 14
Im Image sollte die CCcam aktiviert sein, der Cardserver bzw. OScam,
bei einen externen Cardreader noch Bootconsole auf Null und das hier ändern:
device = /dev/tts/0
Ausführlicher gehts nicht mehr, nun sollte jeder klar kommen.
Danke für die ausführliche Anleitung.Zitat:
Zitat von dirk01
Aber was und wo müsste ich noch etwas eintragen,wenn ich die SK* Vollabo Karte mitlaufen lassen würde?
MfG