FLASH WIZARD von Musicbob
Hier findet ihr immer die aktuelle Version des bekannten Flashprogramms Flashwizard!
grz rqs
shadow00 (17.03.12)
Hallo,
es gibt jetzt den 4.5a.
der 4.5 hatte den Fehler, dass mit 4,5 gesicherte Images nicht fehlerfrei raufgeladen werden konnten und noch andere Kleinigkeiten.
Geändert von rqs (10.02.05 um 12:02 Uhr)
Hatte mich schon gefragt was da wohl geändert wurde.
floh
Wer fragt ist dumm!
Wer nicht fragt, bleibt dumm!!
Leutz was macht das progi???
Welcome to FlashWizard PRO NFS beta mkII
What's new?
* Added compatibility with images for DB 500 and DB 56xx
They are automatically recognized and installed, just drag&drop as ever.
The install beginning dialog will inform you on the dropped image.
Now FlashWizard is full compatible with DB 7000, DB 56xx and DB 500 images.
Thay can be installed either in flash and multiboot.
* Added Advanced SmartCopy
Allow to full copy a list of file and/or folders from active image to the new one being installed.
As for SmartSettings, it is full working also with images that have a compressed /var folder at install time.
WARNING_1: be careful with this option, use wildcards in filenames only if you actually know what you are doing.
WARNING_2: To avoid image malfunction, do not try to copy special dir/files (like /var/etc/init) between images developed by different Teams: every developer use these files to configure their images in a different way each one from the others.
If you're not an advanced user, limit the use of Advanced SmartCopy to plugins files and other useful addons ;-)
Please read this NOTE:
I have not a DB 5620 or DB 500.
I tested DB 500 and DB 5620 images by installing them on my DB 7000, with original DMM 107.2 (kernel 2.4.20) image, just like the actual kernel of DB 500/56xx.
The images are booting up ok here, until Enigma showing up.
Then it gives a Fatal Error, of course, because I am trying to run a 5xxx image on a db 7000 (it says "cannot load Remote Control codes for db 7000").
So, being passed through all the boot up process, until Enigma loop, I think it is working on a real 500 and 5620, with NFS mounted device of course.
But I couldn't test it myself.
FINALLY... remember it is still a beta version...
Have a good testing, my friends!
DEUTSCH ENGLISCH ITALIENISCH
grz rqs
Hallo,
da mittlerweile fast täglich eine neue Version des Flashprogramms Flashwizard erscheint, habe ich alle älteren Versionen hier aus dem Thread entfernt. Die jeweils aktuelle findet ihr immer im ersten Beitrag! Sollte einmal die deutsche Sprachdatei nicht dabei sein, könnt ihr die anhändende benutzen, einfach ins Verzeichnis Locale kopieren!
grz rqs
Er verändert die start Menu so das frei Auswahl von betriebsystem zu starten wollen von Flash ,usb,hdd ,Zitat von JohnyWonny
ist super Programm empfehlungswert
Mit freundlichen Grüßen
Magic007
Moin
Wann kommt es für die 7020 raus????
Blechverdreher
================================================== =============================
FlashWizard PRO History - coded by MusicBob
================================================== =============================
Release 5.1 PRO 29/08/2005
- Advanced Secure Install procedure for multiboot images.
This powerful procedure checks automatically the reliability of all copied files when doing a multiboot install.
If one or more files are found corrupted, then a popup window will be displayed containing a list of
non-consistant files for currently installed image. So you'll decide if continue or not:
Note: it's strongly recommended to abort installation, the image mostly won't boot if has corrupted files.
So, as I'm saying from months, the bug was definitely a squashfs 2.0 bug, this new powerful option
will show you clearly as it is.
This procedure is implemented via a patched "cp" command (took from new busybox 1.01 and modified by me),
used instead of standard one while installing.
If no popup window is shown during install, you are now sure of a perfect result.
If corrupted files are found, simply try to reinstall the image a second time.
Even better, do first a full reboot of your dreambox:
it has been proved, during tests, that error rate is by far less after a complete reboot.
- Quick FTP
On SmartTelnet Window, you can now find a quick drag-and-drop FTP client, very comfortable for most operations.
You can just drag and drop your files from Windows desktop to the needed panel, each one will FTP the dropped
file(s) on the stated directory (the most used places on dreambox, like /var/tuxbox/plugins - /var/bin - /tmp ...)
In addiction, you can specify the file attributes after FTP transfer, also if the destination file will be
deleted before FTP, plus an option to change (cd) automatically SmartTelnet to the FTP dir after the transfer.
Two customizable FTP panels are provided too. Enter there your preferred FTP dir ;-)
Actual version does NOT support directory transfers, only one or multiple selected files can be dropped.
- actualized Advanced SmartSettings Copy
The latest config variables are now updated for SmartSettings Copy parser, including teletext cache, samba on/off,
audio channels priority (thanks redneck :-), saved mountpoints NFS or CIFS.
- Kill enigma before flash install
A killall command is issued to exit enigma before installing an image in flash memory, stopping most dreambox
processes, load and activities, to avoid install problems.
Note: it is always recommended to leave it ON.
- New Boot menu 1.5
NFS install procedure is enhanced and fixed, hopefully now always working on all connected hardwares.
- Automatic /hdd/epg.dat files delete at boot
A workaround for actual Enigma epg cache bug.
When you boot a different image than the last booted one, automatically epg cache files are deleted
from your hard disk, avoiding enigma to crash on startup.
- Support for localized charsets
Long awaited feature... you can choose the Character set most suitable for your Country (in language file):
# DEFAULT the default charset
# SHIFTJIS Japanese shift-JIS characters.
# HANGEUL Korean characters (Wansung).
# JOHAB Korean characters (Johab). Not available on NT 3.51
# GB2312 Simplified Chinese characters (mainland china).
# CHINESEBIG5 Traditional Chinese characters (Taiwanese).
# GREEK Greek characters. Not available on NT 3.51.
# TURKISH Turkish characters. Not available on NT 3.51
# VIETNAMESE Vietnamese characters. Not available on NT 3.51.
# HEBREW Hebrew characters. Not available on NT 3.51
# ARABIC Arabic characters. Not available on NT 3.51
# BALTIC Baltic characters. Not available on NT 3.51.
# RUSSIAN Cyrillic characters. Not available on NT 3.51.
# THAI Thai characters. Not available on NT 3.51
# EASTEUROPE Includes diacritical marks for east european countries. Not available on NT 3.51.
- as ever, some other little updates and fixes, not so many this time, to be honest :-))))
Zu finden im ersten Posting!
grz rqs
================================================== =============================
FlashWizard PRO History - coded by MusicBob
================================================== =============================
Release 5.2 PRO 01/09/2005
- Advanced Secure Install procedure
After further and deeper testings about the squashfs problem, I found that low free memory is
_almost everytime_ the main cause for having files corrupted during install.
This means that newer squashfs versions need much more memory to work, mainly because the squashfs packing
blocks size reached 65536 bytes on latest version, to allow a bigger compression ratio.
Last Squashfs v2.2 has however some smart embedded options when working on constrained memory systems,
so it's higly recommended to use this one on very limited memory envinronments, like Dreambox is.
Keeping that news in mind, I tuned up the whole multiboot install procedure, and added a new option:
if empty or corrupted files are found, a new button "Kill enigma and retry" is provided on the error log window.
By selecting that button, FlashWizard will first kill enigma process, then will retry to install the image.
This new procedure has proved to resolve almost all files corrupted installations, so it is highly
recommended to select it, if errors were found.
But, if errors are still present after the Kill enigma procedure, then is mostly a problem arised in image
packing, expecially when always the same files are listed.
Then, if you decide to continue the install, you should check those files manually when finished, before
rebooting dreambox.
- Full French translation included (locale + docs), by Mimi74. Thanks :-)
http://www.spinnes-board.de/vb/showp...59&postcount=1
grz rqs
Danke RQS für das ständige aktualisieren der Soft.
Ich finde dieses Prog einfach genial , wenn man überlegt wie man früher noch ohne auskommen mußte ..............
cu Bow
Egal wie tief man die Messlatte des geistigen Verstandes eines Menschen legt,
es gibt jeden Tag jemanden, der bequem darunter durchlaufen kann.
Von 10 Personen begreift nur einer das binäre System- der andere nicht!
Edit: Niederländisch hinzugefügt!
http://www.spinnes-board.de/vb/showp...59&postcount=1
grz rqs
Release 7o2o BETA 1
26/09/2005
- THIS IS A PUBLIC BETA
Every comment or bug report is highly appreciated, best for me if posted
on the official support forum, where I daily hang around :-)
http://www.satnews.it/vbforum/forumdisplay.php?f=28
Thanks.
- Added DM7020 to the known machines :-)
On DM7020 is currently supported:
1) Multiboot install/remove of images and backups (*.fwz), both OpenEmbedded native
images and "old" dm7000 images are supported, and also FW backups (*.fwz) of
old and new openembedded images.
2) Settings save/restore for current running image.
3) SmartSettings Copy, even from OE image to standard one (this was the hard part to do!)
You will find all properly set-up on your brand new installed image, even at first boot ;-)
4) Compatible with all known images in flash, no need of an official DMM one.
- Full automatic recognition of connected dreambox model and running image type
(open embedded or standard structured or cramfs only, as for old DM500 images),
and also install-time recognition of new image's structure.
The end user will take no care of what image he wish to install and where, all
patches and fixes will be automatically performed by FlashWizard.
- Added images install on Compact Flash (DM7020 and DM7000 with tricky install)
On DM7000, you must switch you HDD to slave (if you have any) in order to work with
a compatible Compact Flash, then you must patch the mount commands in your images to
/dev/ide/.../target1/... for letting the hdd being recognized and mounted.
WARNING: DO NOT connect a CF on DM7000 unless you know exactly what you are doing!!!
Otherwise you could damage your hdd and/or loose all you recordings!
You have been warned....
(However, this is not FlashWizard-related, you can hopefully find full how-to
documentation on all dreambox forums worldwide).
No problems with DM7020, you just have to use a compatible CF.
- Added Compact Flash format and mount buttons (on Config and Utilities Window).
- Updated boot menu to handle CF, with auto-recognition of hosting machine (current version is 1.7)
- Added SmartTelnet image recognition:
The "Quick FTP" buttons will automatically be set on right destination directories,
according to which image type is currently selected at SmartTelnet launch
(open embedded or standard 7000-like image)
The image infos (version) will be collected from right place, with auto recognition too.
- TODO:
* DM7020 Flash install of images and backups (due to nand memory hardware, it is not easy as before).
* Install of 7020 images on 7000 (hmmm... not so necessary feature, I think ... at least now! ;-).
- NOTES:
1) As far as I know, FlashWizard is not compatible with Miniroot installed on 7020 flash image.
Please uninstall Miniroot if you wish to try FlashWizard.
2) Installing images on NFS does not work properly with 7020.
I have no idea why it don't work, as it works like a charm with DM7000/DM500/DM5620
The procedure is identical, but the NFS install actually hangs on DM7020...
Should be related to networking problems of actual 7020 images. I think.
So: please use only CF-HDD-USB on a DM7020 for the moment.
3) DM7020:
It is highly recommended to have the flash image running when you start to install a new image on
multiboot.
Zu finden im ersten Posting!
grz rqs
Release 7o2o BETA 2 30/09/2005
- THIS IS A PUBLIC BETA
Every comment or bug report is highly appreciated, best for me if posted
on the official support forum, where I daily hang around :-)
http://www.satnews.it/vbforum/forumdisplay.php?f=28
Warning, please read:
-> PLEASE UNINSTALL Beta_1 from your flash image before installing present release.
-> To uninstall, you must use FW beta_1 itself, NOT this beta_2 release.
Thanks. :-)
What is supported?
==================
- DM7020:
To make it clear: :-)
* On Flash:
you can use *any* true OpenEmbedded .nfi image (MUST have an OpenEmbedded image
in flash, no old fashioned 7000-like images are supported in flash).
* On Multiboot (USB/HDD/CF/NFS) you can install;
1) all known .NFI images, both OpenEmbedded and Tuxbox-CVS (yes, old 7000's style too, like Neutrino);
2) all known .IMG images, built for DM7000 from 1.074 to 1.09 (!!);
3) .FWZ backups of any DM7000 images
4) .FWZ backups of DM7020 images, both OpenEmbedded and Tuxbox-CVS old fashioned.
- DM7000/5620/500:
All is still supported:
you can install and run every image/backup from 1.074 to 1.09 both in flash and multiboot
on USB/CF/HDD/NFS (only on models that support these devices).
What is new?
============
- DM7020: Totally rewritten image startup logic
Fixed network startup, Telnet server is now always working for multiboot images.
Warning: PLEASE UNINSTALL Beta_1 from your flash image before installing present release.
- DM7020: Get rid of GO file, both for .NFI and .IMG images and backups.
The GO file will no more be present on images installed on DM7020.
Warning: this means that you can't swap anymore an usb stick or CF card from DM7000
to DM7020 and vice-versa to use the same installed images.
Please make a backup and then restore it on the target machine to be full compatible.
Swapping Usb Sticks and CF cards between dreamboxes sharing the same model name
will of course still work perfectly as before.
- DM7020: Nameserver address fixed on SmartSettings copy
- DM7000: Rewritten GO file, updated and fixed for latest images
All .ko modules are now FULL removed before starting a multiboot image.
The kernel modules aren't belonging to flash image any more (if an image of
same kernel version is to be started, of course).
Multiboot images will use their own modules.
- DM7000: Fixed patches on rcS file of latest CVS
(no remark lines as unique statement inside if..then..fi conditional, as ash
shell scripts don't like it... ;-)
- New Boot menu 1.8
- SmartTelnet clipboard buffer enhanced, for wider range of copy/paste data.
- Other fixes and code tunings, as ever :-)
TO DO:
======
- DM7020: Install in flash of NFI images and FWZ backups.
Please be patient a while, this will be the next step, I promise :-)
Notes:
======
- When installing a non-enigma image (Neutrino), please make sure to
disable SmartSettings copy. SmartSettings copy procedure is tuned for
Enigma images and will not work on others.
Wie immer, im ersten Posting!
grz rqs