Juhu es klappt nun :-)
Ich habe das
mit dem ersetzen müssenM: 1830 1830:003411
P: 1830:000000
I: 1834:000000
P: 1830 1
Juhu es klappt nun :-)
Ich habe das
mit dem ersetzen müssenM: 1830 1830:003411
P: 1830:000000
I: 1834:000000
P: 1830 1
2x|Kathrein UFS 910|TitanNit 1.24
1x|Dbox2|GLJ 2.65
Das brauchst du eigentlich nur wenn die Karte abgelaufen ist. So fragt Oscam immer wieder nach, ob sie einen Sender entschlüsseln kann. Ohne die 1 ist nach dreimal Schluß.
Tank
Hallo,
zur Zeit habe ich eine bestehndes und funktionierendes HS.
Brauch jetz aber für Eigenbedarf ein CS über inet.
Kann mir jemand helfen die zu bewerkstelligen
Anbei die Daten des HS
Danke !Server:
Oscam Config:
[global]
disablelog = 1
logfile = /tmp/oscam.log
fallbacktimeout = 4900
bindwait = 20
nice = -1
maxlogsize = 512
preferlocalcards = 1
[cs357x]
port = 10000
[dvbapi]
enabled = 1
au = 1
user = local
boxtype = dreambox
[webif]
httpport = XXXX
httpuser = XXXX
httppwd = XXXX
httphelplang = de
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255
httpdyndns = XXXX.dyndns.org
Oscam User
[account]
user = local
au = 1
group = 1
[account]
user = XXXX
pwd = XXXX
keepalive = 1
au = 1
group = 1
Oscam Server
reader]
label = um02
protocol = internal
device = /dev/sci0
caid = 1838
boxkey = A7XXXX
rsakey = B5XXXX
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,1,2
Client:
Oscam Config
[global]
disablelog = 1
logfile = /tmp/oscam.log
clienttimeout = 3000
fallbacktimeout = 2900
cachedelay = 120
bindwait = 20
nice = -1
maxlogsize = 512
[dvbapi]
enabled = 1
au = 1
decodeforever = 1
user = local
boxtype = dreambox
[webif]
httpport = XXXX
httpuser = XXXX
httppwd = XXXX
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255
Oscam User
[account]
user = local
au = 1
group = 1
Oscam Server
Oscam Server
[reader]
label = um02
protocol = camd35
device = 192.168.XXX.XX,1XXXX
user = XXXX
password = XXXX
group = 1
VG BL RD
Hi, wie willst du dich denn verbinden ? Du mußt beim Client in der Server einen Remote Reader anlegen und die group dann in der User eintragen.
Tank
Hallo Samy909,
ich will ein reines OSCAM Netzerk, d. h. also mit eine OSCAM Server und einen OSCAM Client wie beim HS
Wie müsste der reader in der client aussehen? SO?
reader = um02
protocol =camd35
device = XXX.dyndns.org,10000
user = muss ich einen user beim server anlegen?
Password =
group = 1
Danke
Gruß
BLRD
Ja, beim Server muß ein Account angelegt werden. Fast, der Port wird vom Server " bestimmt ". Den Reader würd ich group 2 geben. In der User dann 2 eintragen.
Code:group = 1,2
Tank
protocol = 378x (tcp)
DM 920UHD
DM 7080 HD
DM 900 UHD
Samsung UHD 82 Zoll
Hallo,
jetzt die aktualisierte Configs.
Kann jemand drüber schauen bevor ich dies installiere?Server:
Oscam Config:
[global]
disablelog = 1
logfile = /tmp/oscam.log
fallbacktimeout = 4900
bindwait = 20
nice = -1
maxlogsize = 512
preferlocalcards = 1
[cs357x]
port = 10000
[dvbapi]
enabled = 1
au = 1
user = local
boxtype = dreambox
[webif]
httpport = XXXX
httpuser = XXXX
httppwd = XXXX
httphelplang = de
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255
httpdyndns = 123.dyndns.org
Oscam User
[account]
user = local
au = 1
group = 1
[account]
user = XXXX
pwd = XXXX
keepalive = 1
au = 1
group = 1
[account]
user = 123
pwd = 123
description = client
hostname = 123.dyndns.org
au = 1
group = 2
Oscam Server
reader]
label = um02
protocol = internal
device = /dev/sci0
caid = 1838
boxkey = A7XXXX
rsakey = B5XXXX
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,1,2
Client:
Oscam Config
[global]
disablelog = 1
logfile = /tmp/oscam.log
clienttimeout = 3000
fallbacktimeout = 2900
cachedelay = 120
bindwait = 20
nice = -1
maxlogsize = 512
[dvbapi]
enabled = 1
au = 1
decodeforever = 1
user = local
boxtype = dreambox
[[webif]
httpport = XXXX
httpuser = XXXX
httppwd = XXXX
httphelplang = de
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255
httpdyndns = 123.dyndns.org
Oscam User
[account]
user = 123
pwd = 123
description = client
hostname = 123.dyndns.org
au = 1
group = 2
Oscam Server
[reader]
label = um02
protocol = 378x
device = 123.dyndns.org,10000
user = 123
password = 123
group = 2
Denn ich möcht nicht das HS zerschiessen, da mir sonst meine Schwangere Ehefrau ...
Danke
Gruß
Hi, du willst doch als Client auf einen anderen Server zugreifen , oder willst du übers Netz weiter sharen ?
Tank
Ich denke du meinst mit weiter sharen , dass ich in WHG 1 einen Oscam laufen habe und in der WHG 2 (verbunden über INet) eine 2 Box auch mit Oscam.
Genau dies möchte haben!
Beide haben die Oscam r8915
Das wär jetzt der zweite Client. Hast du im Router den Port 10000 zum Server weitergeleitet ?
Code:Client: Oscam Config [global] disablelog = 1 logfile = /tmp/oscam.log clienttimeout = 3000 fallbacktimeout = 2900 cachedelay = 120 bindwait = 20 nice = -1 maxlogsize = 512 [dvbapi] enabled = 1 au = 1 decodeforever = 1 user = local boxtype = dreambox [[webif] httpport = XXXX httpuser = XXXX httppwd = XXXX httphelplang = de httprefresh = 10 httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255 httpdyndns = 123.dyndns.org Oscam User [account] user = local au = 1 group = 1 Oscam Server [reader] label = um02 protocol = 357x device = 123.dyndns.org,10000 user = 123 password = 123 group = 1
Server user
Code:[account] user = 123 pwd = 123 au = 0 group = 1
Tank
Hallo,
nochmal zur Veranschaulichung
Oscam.JPG
Server
Client 1Code:Server: Oscam Config: [global] disablelog = 1 logfile = /tmp/oscam.log fallbacktimeout = 4900 bindwait = 20 nice = -1 maxlogsize = 512 preferlocalcards = 1 [cs357x] port = 10000 [dvbapi] enabled = 1 au = 1 user = local boxtype = dreambox [webif] httpport = XXXX httpuser = XXXX httppwd = XXXX httphelplang = de httprefresh = 10 httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255 httpdyndns = XXXX.dyndns.org Oscam User [account] user = local au = 1 group = 1 [account] user = XXXX pwd = XXXX keepalive = 1 au = 1 group = 1 Oscam Server reader] label = um02 protocol = internal device = /dev/sci0 caid = 1838 boxkey = A7XXXX rsakey = B5XXXX detect = cd mhz = 368 cardmhz = 368 group = 1 emmcache = 1,1,2
Client 2Code:Oscam Config [global] disablelog = 1 logfile = /tmp/oscam.log clienttimeout = 3000 fallbacktimeout = 2900 cachedelay = 120 bindwait = 20 nice = -1 maxlogsize = 512 [dvbapi] enabled = 1 au = 1 decodeforever = 1 user = local boxtype = dreambox [webif] httpport = XXXX httpuser = XXXX httppwd = XXXX httprefresh = 10 httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255 Oscam User [account] user = local au = 1 group = 1 Oscam Server Oscam Server [reader] label = um02 protocol = camd35 device = 192.168.XXX.XX,1XXXX user = XXXX password = XXXX group = 1
Kann mir jemand die vorhanden Configs aufarbeiten?Code:Oscam Config [global] disablelog = 1 logfile = /tmp/oscam.log clienttimeout = 3000 fallbacktimeout = 2900 cachedelay = 120 bindwait = 20 nice = -1 maxlogsize = 512 [dvbapi] enabled = 1 au = 1 decodeforever = 1 user = local boxtype = dreambox [[webif] httpport = XXXX httpuser = XXXX httppwd = XXXX httphelplang = de httprefresh = 10 httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255 httpdyndns = 123.dyndns.org Oscam User [account] user = 123 pwd = 123 description = client hostname = 123.dyndns.org au = 1 group = 2 Oscam Server [reader] label = um02 protocol = 378x device = 123.dyndns.org,10000 user = 123 password = 123 group = 2
Danke.
Hi, hast du die Config mal getestet
Zitat von sammy909
Tank
Hallo,
so, konnte mich jetzt der Sache wieder widmen.
Anbei die korrigierten Config com Server und Client2.
Jedoch ohne Erfolg.
Auch die LOG´s sind anbei.
Danke.Server
conf
[global]
disablelog = 1
logfile = /tmp/oscam.log
fallbacktimeout = 4900
bindwait = 20
nice = -1
maxlogsize = 512
preferlocalcards = 1
[cs357x]
port = 12121
[cccam]
port = 12122
reshare = 2
ignorereshare = 1
version = 2.3.0
updateinterval = 300
minimizecards = 0
stealth = 0
reshare_mode = 0
[dvbapi]
enabled = 1
au = 1
user = local
boxtype = dreambox
[webif]
httpport = 80XX
httpuser = XXXX
httppwd = XXXX
httphelplang = de
httprefresh = 10
httpallowed = 0.0.0.0-255.255.255.255
httpdyndns = XXXX.dyndns.org
user
[account]
user = local
au = 1
group = 1, 2
[account]
user = user1
pwd = user1
keepalive = 1
au = 1
group = 1, 2
[account]
user = user2
pwd = user2
keepalive = 1
group = 1, 2
hostname = XXXX.dyndns.org, 12122
cccmaxhops = 2
cccreshare = 1
server
[reader]
label = um02
protocol = internal
device = /dev/sci0
caid = 1838
boxkey = A76..............
rsakey = B55..............
detect = cd
mhz = 2700
cardmhz = 337
group = 1,2
emmcache = 1,1,2
[reader]
label = CSDR
description = cccam
protocol = cccam
device = XXXX.dyndns.org, 12122
user = user2
password = user2
inactivitytimeout = 30
group = 1,2
cccversion = 2.3.0
cccmaxhops = 2
ccckeepalive = 1
LOG
2013/11/05 14:43:01 A97188 p XXXX [cccam] connecting to XXX.dyndns.org:12122
2013/11/05 14:43:01 A97188 p XXXX [cccam] connect failed: Connection refused
Client
conf
[global]
disablelog = 1
logfile = /tmp/oscam.log
clienttimeout = 3000
fallbacktimeout = 2900
bindwait = 20
nice = -1
maxlogsize = 512
[cs357x]
port = 12121
[cccam]
port = 12122
reshare = 2
ignorereshare = 1
version = 2.3.0
updateinterval = 300
minimizecards = 0
stealth = 0
reshare_mode = 0
[dvbapi]
enabled = 1
au = 1
user = local
boxtype = dreambox
[webif]
httpport = 80XX
httpuser = XXXX
httppwd = XXXX
httphelplang = de
httprefresh = 10
httpallowed = 0.0.0.0-255.255.255.255
httpdyndns = XXXX.dyndns.org
user
[account]
user = local
au = 1
group = 1, 2
[account]
user = user2
pwd = user2
keepalive = 1
group = 1, 2
hostname = XXXX.dyndns.org, 12122
cccmaxhops = 2
cccreshare = 1
server
[reader]
label = um02
protocol = internal
device = /dev/sci0
caid = 1838
boxkey = A76..................................
rsakey = B55..................................
detect = cd
mhz = 2700
cardmhz = 337
group = 1,2
emmcache = 1,1,2
[reader]
label = XXXX
description = cccam
protocol = cccam
device = XXXX.dyndns.org, 12122
user = user2
password = user2
inactivitytimeout = 30
group = 1,2
cccversion = 2.3.0
cccmaxhops = 2
ccckeepalive = 1
LOG
2013/11/05 15:05:51 532D70 p XXXX configuration error!
2013/11/05 15:05:51 5498B8 c can't resolve XXXX.dyndns.org, 12122, error: No address associated with hostname
2013/11/05 15:05:51 5498B8 c encrypted cccam-client 95.222.201.XXX rejected (www, invalid ip)
2013/11/05 15:05:51 5498B8 c password for 'www' invalid!
2013/11/05 15:05:51 5498B8 c www disconnected from 95.222.201.XXX
2013/11/05 15:06:02 5498B8 c can't resolve XXXX.dyndns.org, 12122, error: No address associated with hostname
2013/11/05 15:06:02 5498B8 c encrypted cccam-client 95.222.201.XXX rejected (www, invalid ip)
2013/11/05 15:06:02 5498B8 c password for 'www' invalid!
2013/11/05 15:06:02 5498B8 c www disconnected from 95.222.201.XXX
Gruß
BLRD
Hi, du hast ja überall die gleichen Ports, das geht nicht. In der Oscam config kannst du das Protokoll wählen, mit dem du weiter sharen willst. Mit der Oscam server holst du dir " Daten " von Karte oder mit remote Reader von einer anderen Box. Und mit der user kannst du definieren, wer was bekommt. Google mal nach Oscam Config Creator.
Tank
Berechtigungen
Zitieren
