Dann poste nochmal vom Server und vom Client, Oscam config, server und user.
@Purzelpreis der Server läuft.
Dann poste nochmal vom Server und vom Client, Oscam config, server und user.
@Purzelpreis der Server läuft.
Tank
Serverbox
oscam.config
oscam.serverCode:# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r7798 # Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.conf.txt [global] disablelog = 1 logfile = /dev/null unlockparental = 1 nice = -1 waitforcards = 0 preferlocalcards = 1 lb_mode = 1 lb_retrylimit = 1600 [cccam] port = 12001 version = 2.3.0 reshare = 2 keepconnected = 3 [monitor] port = 16500 nocrypt = 127.0.0.1,192.168.65.1,192.168.65.206,192.168.65.208 monlevel = 1 [webif] httpport = 83 httphelplang = de httprefresh = 10 httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255
oscam.userCode:# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r7798 # Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.server.txt [reader] label = reader0_sky_s02 enable = 0 protocol = internal device = /dev/sci0 caid = 1702,1833 boxkey = 1122334455667788 detect = cd mhz = 600 cardmhz = 600 group = 1 emmcache = 1,3,2 [reader] label = reader0_sky_v13 enable = 0 protocol = internal device = /dev/sci0 caid = 09C4 boxid = 596C3056 detect = cd mhz = 357 cardmhz = 357 group = 1 emmcache = 1,3,2 [reader] label = reader0_sky_v14 protocol = internal device = /dev/sci0 caid = 098C boxid = 12345678 detect = cd mhz = 500 cardmhz = 357 group = 1 emmcache = 1,3,2 [reader] label = reader0_hd+_hd01 enable = 0 protocol = internal device = /dev/sci0 caid = 1830 rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5 boxkey = A7642F57BC96D37C detect = cd mhz = 368 cardmhz = 368 group = 1 emmcache = 1,3,2 [reader] label = reader0_hd+_hd02 enable = 0 protocol = internal device = /dev/sci0 caid = 1843 rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5 boxkey = A7642F57BC96D37C detect = cd mhz = 368 cardmhz = 368 group = 1 emmcache = 1,3,2 [reader] label = reader0_hd+_hd03 enable = 0 protocol = internal device = /dev/sci0 smargopatch = 1 caid = 1860 rsakey = 901E595152E67DFD5B134E1D195C4141B3BB1394A8AF4D6BF1D1085DCC4D9CBA5C73A06ED21FC3556B685498030BB1185766117565E39995EFBF72135C2817B7 boxkey = A7642F57BC96D37C detect = cd nagra_read = 2 mhz = 368 cardmhz = 368 group = 1 emmcache = 1,1,2 [reader] label = reader0_srg_via enable = 0 protocol = internal device = /dev/sci0 caid = 0500 detect = cd mhz = 357 cardmhz = 357 group = 1 emmcache = 1,3,2 [reader] label = reader0_orf_0d95 enable = 0 protocol = internal device = /dev/sci0 caid = 0D95 detect = cd mhz = 357 cardmhz = 357 group = 1 emmcache = 1,3,2 [reader] label = reader0_orf_0d05 enable = 0 protocol = internal device = /dev/sci0 caid = 0D05 detect = cd mhz = 357 cardmhz = 357 group = 1 emmcache = 1,3,2 [reader] label = reader0_kabelbw_v23 enable = 0 protocol = internal device = /dev/sci0 caid = 098E boxid = 12345678 detect = cd mhz = 357 cardmhz = 357 group = 2 emmcache = 1,1,2 [reader] label = reader1_sky_s02 enable = 0 protocol = internal device = /dev/sci1 caid = 1702,1833 boxkey = 1122334455667788 detect = cd mhz = 600 cardmhz = 600 group = 2 emmcache = 1,3,2 [reader] label = reader1_sky_v13 enable = 0 protocol = internal device = /dev/sci1 caid = 09C4 boxid = 596C3056 detect = cd mhz = 357 cardmhz = 357 group = 2 emmcache = 1,3,2 [reader] label = reader1_sky_v14 enable = 0 protocol = internal device = /dev/sci1 caid = 098C boxid = 12345678 detect = cd mhz = 357 cardmhz = 357 group = 2 emmcache = 1,3,2 [reader] label = reader1_hd+_hd01 enable = 0 protocol = internal device = /dev/sci1 caid = 1830 rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5 boxkey = A7642F57BC96D37C detect = cd mhz = 368 cardmhz = 368 group = 2 emmcache = 1,3,2 [reader] label = reader1_hd+_hd02 enable = 0 protocol = internal device = /dev/sci1 caid = 1843 rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5 boxkey = A7642F57BC96D37C detect = cd mhz = 368 cardmhz = 368 group = 2 emmcache = 1,3,2 [reader] label = reader1_hd+_hd03 enable = 0 protocol = internal device = /dev/sci1 smargopatch = 1 caid = 1860 rsakey = 901E595152E67DFD5B134E1D195C4141B3BB1394A8AF4D6BF1D1085DCC4D9CBA5C73A06ED21FC3556B685498030BB1185766117565E39995EFBF72135C2817B7 boxkey = A7642F57BC96D37C detect = cd nagra_read = 2 mhz = 368 cardmhz = 368 group = 2 emmcache = 1,1,2 [reader] label = reader1_srg_via enable = 0 protocol = internal device = /dev/sci1 caid = 0500 detect = cd mhz = 357 cardmhz = 357 group = 2 emmcache = 1,3,2 [reader] label = reader1_orf_0d95 enable = 0 protocol = internal device = /dev/sci1 caid = 0D95 detect = cd mhz = 357 cardmhz = 357 group = 2 emmcache = 1,3,2 [reader] label = reader1_orf_0d05 enable = 0 protocol = internal device = /dev/sci1 caid = 0D05 detect = cd mhz = 357 cardmhz = 357 group = 2 emmcache = 1,3,2 [reader] label = reader1_kabelbw_v23 enable = 0 protocol = internal device = /dev/sci1 caid = 098E boxid = 12345678 detect = cd mhz = 357 cardmhz = 357 group = 2 emmcache = 1,1,2 [reader] label = line_cccam protocol = cccam device = 192.168.x.xx,12001 user = mxxxx password = pxxxx reconnecttimeout = 2 fallback = 1 group = 1 emmcache = 1,1,2 cccversion = 2.3.0 cccmaxhops = 2 cccreshare = 0 [reader] label = line_newcamd enable = 0 protocol = newcamd device = host key = 0102030405060708091011121314 user = pass password = pass1 fallback = 1 group = 3 [reader] label = reader-22 enable = 0 protocol = cccam device = inactivitytimeout = 0
ClientboxCode:# oscam.user generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r7798 # Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.user.txt [account] user = cccam pwd = cccam au = 1 betatunnel = 1833.FFFF:1702 group = 1,2,3 cccmaxhops = 15 cccreshare = 15 cccignorereshare = 1 [account] user = mxxxx pwd = pxxxx hostname = 192.168.x.xx,12001 au = 1 betatunnel = 1833.FFFF:1702 group = 1,2,3 cccmaxhops = 15 cccreshare = 15 cccignorereshare = 1
oscam.config
oscam.serverCode:# # main configuration # [global] nice = -1 WaitForCards = 1 # logging logfile = /var/log/oscam/oscam.log usrfile = /var/log/oscam/oscamuser.log cwlogdir = /var/log/oscam/cw # monitor [monitor] [monitor] nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255 appendchaninfo = 1 # web interface [webif] httpport = 8888 httpuser = myusername httppwd = mypassword # anti-cascading [anticasc] enabled = 1 numusers = 1 sampletime = 2 samples = 5 penalty = 1 aclogfile = /var/log/oscam/aclog.log denysamples = 9 # protocols [newcamd] key = 000102030405060708090A0B0C0D port = 10000@0100:FFFFFF;10001@0200:FFF000,FFFF00;10002@0300:FFFFFF [radegast] port = 20000 user = user1 allowed = 192.168.0.0-192.168.255.255 [cs378x] port = 30000@0100:FFFFFF;30001@0200:FFF000,FFFF00;30002@0300:FFFFFF [cccam] port = 12001 version = 2.3.0 reshare = 2 [gbox] hostname = host.example.com port = 50000 password = password1 [serial] device = user2@/dev/ttyS0?delay=1&timeout=300 [dvbapi] enabled = 1 user = mxxxx
oscam.userCode:# # reader configuration # # serial reader [reader] label = reader1 protocol = mouse detect = CD device = /dev/ttyS0 group = 1 emmcache = 1,3,2 services = services1 caid = 0100 # USB serial reader [reader] label = reader2 protocol = mouse detect = CD device = /dev/ttyUSB0 aeskey = 000102030405060708090A0B0C0D0E0F group = 2 emmcache = 1,3,2 services = services2 caid = 0200 # remote newcamd reader with fallback for group 1 [reader] label = remote1 protocol = newcamd key = 0102030405060708091011121314 device = 192.168.0.2,66666 user = user1 password = password1 group = 1 fallback = 1 # remote camd 3.78x reader with fallback for group 2 [reader] label = remote2 protocol = cs378x device = 192.168.0.3,23456 user = user2 password = password2 group = 2 fallback = 1 # remote gbox reader [reader] label = remote3 protocol = gbox mg-encrypted = D: { 192.168.0.4 { 12345 34567 { ABCD1234 { 9 9 }}}} group = 3 caid = 0300 remote CCcam reader [reader] label = cccam-reader protocol = cccam device = 192.168.x.xx,12001 user = mxxxx password = pxxxx group = 1 emmcache = 1,1,2 cccmaxhop = 5 cccversion = 2.3.0 # remote radegast reader [reader] label = remote5 protocol = radegast device = 192.168.0.6,56789 group = 5 caid = 0500 # PCSC reader [reader] label = mypcscreader protocol = pcsc device = 0 aeskey = 0102030405060708090a0b0c0d0e0f10 group = 6 caid = 0600 # Smargo Smartreader+ (Tripple Reader as well) using kernel drivers (recommended) [reader] label = mysmargo protocol = smargo device = /dev/ttyUSB1 aeskey = 0102030405060708090a0b0c0d0e0f10 group = 7 caid = 0700 # Smargo Smartreader+ using libusb [reader] label = mysmartreader protocol = smartreader device = 001:002 group = 8 caid = 0800 # internal reader [reader] label = myinternalreader protocol = internal device = /dev/sci0 group = 9 caid = 0900 # AD-Teknik AB Multiprogrammer 3.5 serial [reader] label = reader9 protocol = mp35 detect = CD device = /dev/ttyS1 group = 10 emmcache = 1,3,2 services = services9 caid = 1000 # AD-Teknik AB Multiprogrammer 3.6 USB [reader] label = reader10 protocol = mp35 detect = CD device = /dev/ttyUSB1 group = 11 emmcache = 1,3,2 services = services10 caid = 1100 # AD-Teknik AB USB Phoenix at 6.00 mhz [reader] label = reader12 protocol = mp35 detect = CD device = /dev/ttyUSB2 mhz = 600 group = 12 emmcache = 1,3,2 services = services11 caid = 1200 # sc8in1 reader [reader] label = reader12 protocol = sc8in1 device = /dev/ttyUSB3:1 group = 13 emmcache = 1,3,2 caid = 1300
Code:################## General Instruction - oscam.user #################### # # # per default no changes from the user are needed # # # ############################################################################ [account] user = mxxxx pwd = pxxxx hostname = 192.168.x.xx,12001 group = 1 au = 1 uniq = 0 betatunnel = 1833.FFFF:1702 ######## end of file ########
Xtrend ET 9200, Samsung HT-E5200,Panasonic Plasma TX-P42UT50E
Hi,
oscam.server von dem Serrver
enable = 0
gaaaanz schlecht. Die Karten im reader müssen im WebIF erkannt werden &
entitlements haben.
Bei mir sieht das so aus für den 2. & 3. Reader Sky S02 & HD+ HD01 im Smargo:
[reader]
label = sky2
description = #S02
enable = 1
protocol = smartreader
device = Serial:Reader XX0A5XX
key =
password =
pincode = none
readnano =
services =
resetcycle = 0
smargopatch = 0
sc8in1_dtrrts_patch = 0
fallback = 0
cacheex = 0
cacheex_maxhop = 0
cacheex_ecm_filter =
cacheex_allow_request = 1
cacheex_drop_csp = 0
caid = 1702,1833
atr =
boxid =
boxkey = 1bekannt8
rsakey =
ins7e =
ins7e11 =
fix9993 = 0
force_irdeto = 0
ecmnotfoundlimit = 0
ecmwhitelist = 1702:93
ecmheaderwhitelist =
detect = cd
nagra_read = 0
mhz = 600
cardmhz = 600
ident =
chid =
class =
aeskeys =
group = 2
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-u = 0
blockemm-s = 0
blockemm-g = 0
saveemm-unknown = 0
saveemm-u = 0
saveemm-s = 0
saveemm-g = 0
blockemm-bylen =
lb_weight = 300
savenano =
blocknano =
dropbadcws = 0
disablecrccws = 0
use_gpio = 0
ccchop = 0
deprecated = 0
audisabled = 0
auprovid =
ndsversion = 0
ratelimitecm = 0
ratelimitseconds = 0
cooldown = 0,0
[reader]
label = hd1
description = #28.05.2013
enable = 1
protocol = smartreader
device = Serial:Reader XX4FDXX
key =
password =
pincode = none
readnano =
services =
resetcycle = 0
smargopatch = 1
sc8in1_dtrrts_patch = 0
fallback = 0
cacheex = 0
cacheex_maxhop = 0
cacheex_ecm_filter =
cacheex_allow_request = 1
cacheex_drop_csp = 0
caid = 1830
atr =
boxid =
boxkey = A76bekannt37C
rsakey = BF3bekanntDD5
ins7e =
ins7e11 =
fix9993 = 0
force_irdeto = 0
ecmnotfoundlimit = 0
ecmwhitelist = 1830:92
ecmheaderwhitelist =
detect = cd
nagra_read = 0
mhz = 369
cardmhz = 368
ident =
chid =
class =
aeskeys =
group = 3
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-u = 0
blockemm-s = 0
blockemm-g = 0
saveemm-unknown = 0
saveemm-u = 0
saveemm-s = 0
saveemm-g = 0
blockemm-bylen =
lb_weight = 300
savenano =
blocknano =
dropbadcws = 0
disablecrccws = 0
use_gpio = 0
ccchop = 0
deprecated = 0
audisabled = 0
auprovid =
ndsversion = 0
ratelimitecm = 0
ratelimitseconds = 0
cooldown = 0,0
Grüße
Geändert von Purzelpreis (23.02.13 um 17:17 Uhr)
lars.berlin (03.09.13)
Ich habe ja,interne Reader
Auszug vom Webif
GrüsseCode:OSCAM 1.20-unstable_svn build #7798 STATUS CONFIGURATION READERS USERS SERVICES FILES FAILBAN CACHEEX SCRIPT SHUTDOWN hide Thread ID Type ID Label AU Crypted Address Port Protocol Login Online CAID:SRVID Current Channel LB Value/ Reader Idle Status Hide 0x5c2e20 s 0 root 127.0.0.1 0 server 23.02.13 14:40:56 01:39:12 0000:0000 00:00:01 OK Hide 0x622ec0 h 1 root 127.0.0.1 0 http 23.02.13 14:40:56 01:39:12 0000:0000 00:00:00 OK Readers 1/1 Hide 0x5feb78 r 1 reader0_sky_v14 ON OFF 127.0.0.1 0 internal 23.02.13 14:40:56 01:39:12 0000:0000 121 00:33:34 CARDOK (14 entitlements) Proxies 0/1 Hide Restart p 1 line_cccam ON OFF 192.168.x.xx 12001 cccam (-) 0000:0000 no data 01:30:05 OFF Clients 1/1 (0 with ECM within last 15 seconds) Hide Kill c 1 cccam ON ON 127.0.0.1 49549 cccam (2.3.0-3367) 23.02.13 14:41:12 01:38:56 0000:0000 00:33:35 OK
Xtrend ET 9200, Samsung HT-E5200,Panasonic Plasma TX-P42UT50E
Beim Server mußt du in der server den CCcam reader wieder ausschalten.
beim Client alles ausschalten, brauchst du nur, wenn du weitersharen willst.Code:[reader] label = line_cccam enable = 0 protocol = cccam device = 192.168.x.xx,12001 user = mxxxx password = pxxxx reconnecttimeout = 2 fallback = 1 group = 1 emmcache = 1,1,2 cccversion = 2.3.0 cccmaxhops = 2 cccreshare = 0
userCode:# protocols #[newcamd] key = 000102030405060708090A0B0C0D port = 10000@0100:FFFFFF;10001@0200:FFF000,FFFF00;10002@0300:FFFFFF #[radegast] port = 20000 user = user1 allowed = 192.168.0.0-192.168.255.255 #[cs378x] port = 30000@0100:FFFFFF;30001@0200:FFF000,FFFF00;30002@0300:FFFFFF #[cccam] port = 12001 version = 2.3.0 reshare = 2 #[gbox] hostname = host.example.com port = 50000 password = password1 [serial] device = user2@/dev/ttyS0?delay=1&timeout=300 [dvbapi] enabled = 1 user = mxxxx
Code:[account] user = mxxxx pwd = pxxxx hostname = 192.168.x.xx,12001 group = 1 au = 1 uniq = 0 caid = 098C #betatunnel = 1833.FFFF:1702
Tank
Habe ich geändert,geht nicht
Xtrend ET 9200, Samsung HT-E5200,Panasonic Plasma TX-P42UT50E
Hmm, dann nimm auch mal die Hostname Sache aus den user accounts. Die Passwörter stimmen ? Poste mal die Logs von den Webif`s, nach einem Reset.
Die Passwörter müßen übereinstimmen.
Code:[dvbapi] enabled = 1 user = mxxxxund das mit demCode:[account] user = mxxxx pwd = pxxxx hostname = 192.168.x.xx,12001 group = 1 au = 1 uniq = 0 caid = 098C #betatunnel = 1833.FFFF:1702.
Code:[reader] label = line_cccam enable = 0 protocol = cccam device = 192.168.x.xx,12001 user = mxxxx password = pxxxx reconnecttimeout = 2 fallback = 1 group = 1 emmcache = 1,1,2 cccversion = 2.3.0 cccmaxhops = 2 cccreshare = 0Code:[account] user = mxxxx pwd = pxxxx hostname = 192.168.x.xx,12001 au = 1 betatunnel = 1833.FFFF:1702 group = 1,2,3 cccmaxhops = 15 cccreshare = 15 cccignorereshare = 1
Tank
Die Paßwörter stimmen.
Code:OSCAM 1.20-unstable_svn build #7798 STATUS CONFIGURATION READERS USERS SERVICES FILES FAILBAN CACHEEX SCRIPT SHUTDOWN hide Thread ID Type ID Label AU Crypted Address Port Protocol Login Online CAID:SRVID Current Channel LB Value/ Reader Idle Status Hide 0x5c2e20 s 0 root 127.0.0.1 0 server 23.02.13 14:40:56 01:39:12 0000:0000 00:00:01 OK Hide 0x622ec0 h 1 root 127.0.0.1 0 http 23.02.13 14:40:56 01:39:12 0000:0000 00:00:00 OK Readers 1/1 Hide 0x5feb78 r 1 reader0_sky_v14 ON OFF 127.0.0.1 0 internal 23.02.13 14:40:56 01:39:12 0000:0000 121 00:33:34 CARDOK (14 entitlements) Proxies 0/1 Hide Restart p 1 line_cccam ON OFF 192.168.x.xx 12001 cccam (-) 0000:0000 no data 01:30:05 OFF Clients 1/1 (0 with ECM within last 15 seconds) Hide Kill c 1 cccam ON ON 127.0.0.1 49549 cccam (2.3.0-3367) 23.02.13 14:41:12 01:38:56 0000:0000 00:33:35 OK 2013/02/23 17:10:07 5FEB78 r reader0_sky_v14 [videoguard2] TRACE: cardreader_do_ecm: ret rc=1 2013/02/23 17:10:07 5FEB78 r reader0_sky_v14 [videoguard2] TRACE: cardreader_process_ecm: cardreader_do_ecm returned rc=1 (ERROR=0) 2013/02/23 17:10:07 5FEB78 r reader0_sky_v14 [videoguard2] TRACE: ecm: 748D real time: 121 ms 2013/02/23 17:10:07 5FEB78 r add client job action 24 queue length 1 cccam 2013/02/23 17:10:07 626728 c poll() timeout 2013/02/23 17:10:07 626728 c reader0_sky_v14 [videoguard2] TRACE: ecm answer for ecm 748D rc=0 2013/02/23 17:10:07 626728 c cccam (098C&000000/0000/0081/98:748D): found (124 ms) by reader0_sky_v14 (L/1/2/2) 2013/02/23 17:10:07 626728 c cw: 2013/02/23 17:10:07 626728 00 00 00 00 00 00 00 00 97 A5 75 B1 88 69 9F 90 2013/02/23 17:10:07 5FEB78 r reader0_sky_v14 [videoguard2] TRACE: cardreader_do_checkhealth: reader->card_status = 2, ret = 1 2013/02/23 17:10:13 0 --- Skipped 5 duplicated log lines --- 2013/02/23 17:10:13 626728 c check again caid 098C on reader reader0_sky_v14 2013/02/23 17:10:13 626728 c request_cw stage=2 to reader reader0_sky_v14 ecm=4E28 2013/02/23 17:10:13 626728 c start reader thread action 5 2013/02/23 17:10:13 5FEB78 r data from add_job action=5 client r reader0_sky_v14 2013/02/23 17:10:13 5FEB78 r ecm: 2013/02/23 17:10:13 5FEB78 80 70 95 00 00 01 1D 6D 17 81 43 02 59 AA 55 05 2013/02/23 17:10:13 5FEB78 20 01 00 00 80 40 9D 34 3F 39 14 D1 40 FC 79 03 2013/02/23 17:10:13 5FEB78 02 06 02 96 73 7D 0B 0C DE 15 A9 54 1A 0F CE 9A 2013/02/23 17:10:13 5FEB78 00 00 90 64 C1 01 73 42 48 D8 53 93 26 F7 E7 5D 2013/02/23 17:10:13 5FEB78 8B 80 75 71 94 4E 8B 47 02 48 D8 54 29 6D EF 5D 2013/02/23 17:10:13 5FEB78 4C F0 0A B7 62 87 EB 66 81 F1 4C AF C5 22 DD C8 2013/02/23 17:10:13 5FEB78 6E DB 23 51 1F CB B8 B5 99 ED 6E 56 2C 99 A2 C8 2013/02/23 17:10:13 5FEB78 42 D7 0F 66 AD 61 D3 AC 5F 20 EF B0 CE 76 08 C1 2013/02/23 17:10:13 5FEB78 2F 87 ED FA 6E 61 3B 57 51 82 53 48 17 E7 F1 89 2013/02/23 17:10:13 5FEB78 7E 9F 0C 5F 84 40 38 37 2013/02/23 17:10:13 5FEB78 r reader0_sky_v14 [videoguard2] TRACE: cardreader_do_checkhealth: reader->card_status = 2, ret = 1 2013/02/23 17:10:13 5FEB78 r reader0_sky_v14 [videoguard2] TRACE: cardreader_do_ecm: cardreader_do_checkhealth returned rc=1 2013/02/23 17:10:14 5FEB78 r reader0_sky_v14 [videoguard2] TRACE: cardreader_do_ecm: after csystem.do_ecm rc=1 2013/02/23 17:10:14 5FEB78 r reader0_sky_v14 [videoguard2] TRACE: cardreader_do_ecm: ret rc=1 2013/02/23 17:10:14 5FEB78 r reader0_sky_v14 [videoguard2] TRACE: cardreader_process_ecm: cardreader_do_ecm returned rc=1 (ERROR=0) 2013/02/23 17:10:14 5FEB78 r reader0_sky_v14 [videoguard2] TRACE: ecm: 4E28 real time: 121 ms 2013/02/23 17:10:14 5FEB78 r add client job action 24 queue length 1 cccam 2013/02/23 17:10:14 626728 c poll() timeout 2013/02/23 17:10:14 626728 c reader0_sky_v14 [videoguard2] TRACE: ecm answer for ecm 4E28 rc=0 2013/02/23 17:10:14 626728 c cccam (098C&000000/0000/0081/98:4E28): found (124 ms) by reader0_sky_v14 (L/1/2/2) 2013/02/23 17:10:14 626728 c cw: 2013/02/23 17:10:14 626728 C9 90 39 92 75 05 08 82 00 00 00 00 00 00 00 00 2013/02/23 17:10:14 5FEB78 r reader0_sky_v14 [videoguard2] TRACE: cardreader_do_checkhealth: reader->card_status = 2, ret = 1 2013/02/23 17:10:15 622EC0 h WebIf: Origin checked. Result: access from 192.168.1.6 => allowed
Xtrend ET 9200, Samsung HT-E5200,Panasonic Plasma TX-P42UT50E
So was man aus dem Ausschnitt sehen kann, kommen keine Anfragen vom Client. Poste mal den Log vom Client, nach einem Reset.
Tank
Hi,
hier wird das Pferd von hinten aufgezäumt. Wenn die Kathie nach der
Anleitung von Musicnapper bearbeitet wurde, ist nur noch an der Kathie die
oscam.dvbapi (prio v14)
und
oscam.server (port für oscam am Router, username, paßwort)
angepaßt werden. Die UFS910 clienten sind jetzt fertig!
Jetzt zum Server.
Die oscam.server muß für jede Karte/ caid entitlements haben. Wenn eine Karte Sky v13 noch mit zusätzlich
HD+, gibt es in der oscam.server 2 getrennte reader mit unterschiedlichen group, welche sich durch die caid unterscheiden.
Dann dazu noch einen proxy (reader) camd3emu einrichten (group = 3) für O*F/ Austriasat, da oscam keine softcam.key
lesen kann.
Grüße
lars.berlin (03.09.13)
Welche Caid hat denn HD+ auf einer V 13 Karte. Oder was willst du uns mitteilen. Da mußt du schon eine richtige Camd 3 haben, die Keys kannst du dann mit Oscam über Camd 3 Protokoll verteilen.
Tank
@Purzelpreis
hier die dvbapi,schau sie dir mal an,wo und wie muß der Eintrag erfolgen ?
Am Router habe ich den Port 12001 an die Ip der Serverbox weitergeleitet und ich habe eine V14.Habe wie schon geschreiben den oscam mod laufen und funzt super, aber das sharen
@sammy909Code:##################### General Instruction - oscam.dvbapi ###################### # Oscam will work properly without these configs, but you will get quicker # # access in case of Zapping, especially when your CAID is not in first row of PMT # # - prioritize the CAID from your provider that fits your Smartcard # # - exclude other CAID´s from your provider, that doesn´t fit your Smartcard # # # # just enable examples that fits to your environment # # # # For further details see the OSCAM documentation # ################################################################################### # Example Sky Germany S02 Card #P: 1702 #P: 1833 #I: 09c4 #I: 09c7 #I: 09af #I: 1722 #I: 1836 # Example HDplus HD01 Card (white) #M: 1830 1830:003411 #P: 1830:000000 #I: 1834:000000 # Example HDplus HD02 Card (black) #M: 1843 1843:003411 #P: 1843:000000 #I: 1830:000000 # Example ORF new ICE Card #P: 0d95 #I: 0d05 #I: 0648
hier ein Auszug Webif der Clientbox
was mich stutzig macht ist,Code:OSCAM 1.20-unstable_svn build #8006 STATUS CONFIGURATION READERS USERS SERVICES FILES FAILBAN CACHEEX SCRIPT SHUTDOWN hide Thread ID Type ID Label AU Crypted Address Port Protocol Login Online CAID:SRVID Current Channel LB Value/ Reader Idle Status Hide 0x535fb0 s 0 root 127.0.0.1 0 server 23.02.13 16:35:42 01:12:02 0000:0000 00:00:11 OK Hide 0x5e03a0 h 1 root 127.0.0.1 0 http 23.02.13 16:35:42 01:12:02 0000:0000 00:00:00 OK Proxies 0/1 Hide Restart p 1 cccam-reader_(cardsharing) ON OFF 192.168.x.xx 12001 cccam (-) 0000:0000 no data 01:11:39 OFF Clients 1/1 (0 with ECM within last 15 seconds) Hide Kill c 1 anonymous OFF OFF 0.0.0.0 0 dvbapi 23.02.13 16:35:43 01:12:01 0000:0000 01:11:39 OK 2013/02/23 16:35:57 5C73A8 p cccam(r) cccam-reader_(cardsharing): login failed, usr/pwd invalid 2013/02/23 16:35:57 5E33F8 c anonymous (1861&000000/0000/0017/8E:F4F1B0373FB0E1B7E59A86D7F10861D7): rejected (521 ms) by cccam-reader_(cardsharing) - 1861:0017 unknown 2013/02/23 16:35:58 5C73A8 p cccam-reader_(cardsharing) [cccam] connecting to 192.168.x.xx:12001 2013/02/23 16:35:58 5C73A8 p cccam(r) cccam-reader_(cardsharing): login failed, usr/pwd invalid 2013/02/23 16:35:58 5E33F8 c anonymous (1702&000000/0000/0017/93:694520D5B01B90B163E8A66E9395CE6B): rejected (521 ms) by cccam-reader_(cardsharing) - Sky Krimi [B sat] 2013/02/23 16:35:59 5C73A8 p cccam-reader_(cardsharing) [cccam] connecting to 192.168.x.xx:12001 2013/02/23 16:35:59 5C73A8 p cccam(r) cccam-reader_(cardsharing): login failed, usr/pwd invalid 2013/02/23 16:35:59 5E33F8 c anonymous (1722&000000/0000/0017/93:34B1A7A85E376FA13D3CEAA9841A6D6D): rejected (515 ms) by cccam-reader_(cardsharing) - 1722:0017 unknown 2013/02/23 16:36:00 5C73A8 p cccam-reader_(cardsharing) [cccam] connecting to 192.168.x.xx:12001 2013/02/23 16:36:00 5C73A8 p cccam(r) cccam-reader_(cardsharing): login failed, usr/pwd invalid 2013/02/23 16:36:00 5E33F8 c anonymous (1833&000000/0000/0017/89:8619B54443C0884B1574A45AD167F4CA): rejected (515 ms) by cccam-reader_(cardsharing) - Sky Krimi [B sat] 2013/02/23 16:36:01 5C73A8 p cccam-reader_(cardsharing) [cccam] connecting to 192.168.1.30:12001 2013/02/23 16:36:01 5C73A8 p cccam(r) cccam-reader_(cardsharing): login failed, usr/pwd invalid 2013/02/23 16:36:01 5E33F8 c anonymous (1834&000000/0000/0017/89:9EA2432646AEA85E73819D09B696292C): rejected (521 ms) by cccam-reader_(cardsharing) - 1834:0017 unknown 2013/02/23 16:36:02 5C73A8 p cccam-reader_(cardsharing) [cccam] connecting to 192.168.x.xx:12001 2013/02/23 16:36:02 5E33F8 c anonymous (09C4&000000/0000/0017/B3:19FEE25B4B93FBBE4568A35A9B8DA7B9): rejected group (129 ms) (0/0/0/0) - 09C4:0017 unknown (no matching reader) 2013/02/23 16:36:02 5C73A8 p cccam(r) cccam-reader_(cardsharing): login failed, usr/pwd invalid 2013/02/23 16:36:02 5E33F8 c anonymous (09C4&000000/0000/0017/B3:94F21C1187C45453C6A02B2B8C807622): rejected (516 ms) by cccam-reader_(cardsharing) - 09C4:0017 unknown 2013/02/23 16:36:03 5C73A8 p cccam-reader_(cardsharing) [cccam] connecting to 192.168.x.xx:12001 2013/02/23 16:36:03 5C73A8 p cccam(r) cccam-reader_(cardsharing): login failed, usr/pwd invalid 2013/02/23 16:36:03 5E33F8 c anonymous (09AF&000000/0000/0017/92:908549BCE731E695BE6A54FB928C922C): rejected (518 ms) by cccam-reader_(cardsharing) - 09AF:0017 unknown 2013/02/23 16:36:04 5C73A8 p cccam-reader_(cardsharing) [cccam] connecting to 192.168.x.xx:12001 2013/02/23 16:36:04 5C73A8 p cccam(r) cccam-reader_(cardsharing): login failed, usr/pwd invalid 2013/02/23 16:36:04 5E33F8 c anonymous (098C&000000/0000/0017/98:77756A3A432E8C33729BB16FC14C98BD): rejected (515 ms) by cccam-reader_(cardsharing) - 098C:0017 unknown 2013/02/23 16:36:05 5C73A8 p cccam-reader_(cardsharing) [cccam] connecting to 192.168.x.xx:12001 2013/02/23 16:36:05 5C73A8 p cccam(r) cccam-reader_(cardsharing): login failed, usr/pwd invalid 2013/02/23 16:36:05 5E33F8 c dvbapi: ERROR: Can't decode channel 2013/02/23 16:36:05 5E33F8 c anonymous (1861&000000/0000/0017/8E:02461AE4595C26936A9E2A96593B6F5C): rejected (515 ms) by cccam-reader_(cardsharing) - 1861:0017 unknown
2013/02/23 16:36:02 5C73A8 p cccam(r) cccam-reader_(cardsharing): login failed, usr/pwd invalid
habe die Paßwörter kontrolliert,stimmen ????
Xtrend ET 9200, Samsung HT-E5200,Panasonic Plasma TX-P42UT50E
Die Passwörter stimmen nicht.
Code:2013/02/23 16:35:57 5C73A8 p cccam(r) cccam-reader_(cardsharing): login failed, usr/pwd invalid
Tank
HD+ caid 1843 für v13
deshalb habe ich 2 weiße HD+ karten mit caid 1830
Grüße
- - - Aktualisiert - - -
HD+ caid 1843 für v13
deshalb habe ich 2 weiße HD+ karten mit caid 1830
@ faun
meine DVB api
P: 0d05 # prio camd3emu
P: 1702 # prio Sky s02 #wenn Ihr eine V13 nutzt, ersetzt das P durch ein I
P: 1833 # prio SKY HD
P: 0b00 # prio MTV
P: 1830 # prio HD01 HD+
I: 0D95 # prio ORF-ICE
I: 09C4 # ignore Sky V13 ##wenn Ihr eine V13 nutzt, ersetzt das I durch ein P
Grüße
lars.berlin (03.09.13)
@Purzelpreis Er hat eine V 14, also Caid 098C. Wenn eine dvbapi config, dann so.
Code:##################### General Instruction - oscam.dvbapi ###################### # Oscam will work properly without these configs, but you will get quicker # # access in case of Zapping, especially when your CAID is not in first row of PMT # # - prioritize the CAID from your provider that fits your Smartcard # # - exclude other CAID´s from your provider, that doesn´t fit your Smartcard # # # # just enable examples that fits to your environment # # # # For further details see the OSCAM documentation # ################################################################################### # Example Sky Germany S02 Card P: 098C #P: 1833 #I: 09c4 #I: 09c7 #I: 09af #I: 1722 #I: 1836 # Example HDplus HD01 Card (white) #M: 1830 1830:003411 #P: 1830:000000 #I: 1834:000000 # Example HDplus HD02 Card (black) #M: 1843 1843:003411 #P: 1843:000000 #I: 1830:000000 # Example ORF new ICE Card #P: 0d95 #I: 0d05 #I: 0648
Edit. @Purzelpreis Caid 1843 ist die schwarze HD+ Karte. Du mußt einfach mit services arbeiten und zwar beim V 13 reader sky services einfügen. Dann wird nur Sky abgfragt, kein HD+.
Tank
Berechtigungen
Zitieren