oscam.config
################## General Instruction - oscam.conf ####################
# #
# per default no changes from the user are needed #
# but verify the IP-range oh your local Network #
# #
################################################## ##########################
[global]
Nice = -1
ClientTimeout = 7
FallbackTimeout = 3
ClientMaxIdle = 120
CacheDelay = 120
BindWait = 5
WaitForCards = 1
PreferLocalCards = 1
LogFile = stdout
saveinithistory = 1
readerrestartseconds = 5
#LogFile = /var/keys/oscam.log
#usrfile = /var/keys/oscam_usr.log
[monitor]
nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255
appendchaninfo = 1
[webif]
httpport = 8888
httpuser = root
httppwd = oscam
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
[dvbapi]
enabled = 1
au = 1
boxtype = duckbox
user = dvbapi
pmt_mode = 0
######## end of file ########
oscam.server
############### General Instruction - oscam.server ###################
# To activate/deactivate the reader set enable = 1/0 #
# #
# You might specify further entries in each reader section #
# such as "caid =________" and/or "services = _________" but you needn´t #
# For further details see the OSCAM documentation #
################################################## ##########################
######################### Internal Readers ###############################
# Default Config should work with Seca, Conax, Cryptoworks, Viaccess, NDS #
# #
# For Irdeto, Betacrypt just activate "cardmhz=600" by removing the "#" #
# #
# For Nagra activate and set the correct "rsakey = " and "boxkey = " #
# examples for HDplus HD02 and Sky S02 are included #
# #
# for other Smartcards see the OSCAM documentation #
################################################## ##########################
[reader]
enable = 0
Label = HD+ (Kartenschacht) (schwarze Karte)
Protocol = internal
device = /dev/sci0
emmcache = 1,1,2
detect = CD
group = 1
caid = 1843
cardmhz = 368
mhz = 368
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A 23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156 F9EB64E8168EF09E4D9C5CCA4DD5
boxkey = A7642F57BC96D37C
[reader]
enable = 0
Label = HD+ (Kartenschacht) (weisse Karte)
Protocol = internal
device = /dev/sci0
emmcache = 1,1,2
detect = CD
group = 1
caid = 1830
cardmhz = 357
mhz = 357
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A 23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156 F9EB64E8168EF09E4D9C5CCA4DD5
boxkey = A7642F57BC96D37C
[reader]
enable = 0
label = SKY-DE S02 (Kartenschacht)
protocol = internal
device = /dev/sci0
emmcache = 1,1,2
detect = CD
group = 1
caid = 1702,1833
cardmhz = 600
mhz = 600
[reader]
enable = 0
label = SKY-DE V13 (Kartenschacht)
protocol = internal
device = /dev/sci0
detect = CD
group = 1
emmCache = 1,1,2
CAID = 09C4
boxid = 12345678
Mhz = 357
cardmhz = 357
blockemm-g = 1
#ins7e11 = 15
[reader]
enable = 0
label = SKY-DE V14 (Kartenschacht)
Protocol = internal
Device = /dev/sci0
Detect = CD
Group = 1
EMMCache = 1,1,2
CAID = 098C
boxid = 12345678
Mhz = 357
cardmhz = 357
blockemm-g = 1
#ins7e11 = 15
[reader]
enable = 0
Label = MTV (Kartenschacht)
protocol = internal
detect = CD
device = /dev/sci0
group = 1
emmcache = 1,1,2
services = mtv
caid = 0B00
Mhz = 368
cardmhz = 368
[reader]
enable = 0
Label = FreeXTV (Kartenschacht)
protocol = internal
device = /dev/sci0
emmcache = 1,1,2
detect = CD
group = 1
services = srg
caid = 0500
mhz = 357
cardmhz = 368
[reader]
enable = 0
label = SRG (Kartenschacht)
protocol = internal
device = /dev/sci0
emmcache = 1,1,2
detect = CD
Group = 1
mhz = 357
cardmhz = 357
CAID = 0500
deprecated = 1
[reader]
enable = 0
Label = ORF ice (Kartenschacht)
protocol = internal
device = /dev/sci0
emmcache = 1,1,2
detect = CD
group = 1
caid = 0648
force_irdeto = 1
rsakey = DF57B08C0F13E67BD17AD37EAAF4EAA25393F8A0EFE8ACE670 8AAF97C985CBA8A6C13826963BD3092EB9FC72F773A4307247 06AA5E1D14E1747842D32069A12D
boxkey = 1122334455667788
mhz = 600
cardmhz = 600
#deprecated = 1
[reader]
enable = 0
Label = ORF alt (Kartenschacht)
protocol = internal
device = /dev/sci0
emmcache = 1,1,2
detect = CD
group = 1
caid = 0D05
#ident = OD05:000000,000004,00000C,000008,000010
mhz = 368
cardmhz = 368
[reader]
enable = 0
label = skyitalia (Kartenschacht)
protocol = internal
device = /dev/sci0
caid = 09CD
boxid = 1412F60A
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
[reader]
enable = 0
label = tivusat (Kartenschacht)
protocol = internal
device = /dev/sci0
caid = 183D
rsakey = A92DA72FEEACF2947B003ED652153B189E4043B0138C368BDF 6B9ED77DDAD6C0761A2198AEB3FC97A19C9D01CA769B3FFFE4 F6E70FA4E0696A8980E18D8C58E11D817121346E3E66457FDD 84CFA72589B25B538EFC304361B54845F39E9EFA52D805E5FD 86B595B366C35716ABC91FA3DC159C9F4D8164B5
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
[reader]
enable = 0
Label = KabelD D02 (Kartenschacht)
Protocol = internal
Device = /dev/sci0
emmcache = 1,1,2
detect = CD
group = 1
mhz = 600
cardmhz = 600
CAID = 1722,1834
[reader]
enable = 0
Label = KabelD G09 (Kartenschacht)
device = /dev/sci0
Protocol = internal
detect = cd
group = 1
mhz = 357
cardmhz = 357
caid = 09C7
emmcache = 1,1,2
boxid = 12345678
[reader]
enable = 0
label = Unitymedia UM02 (Kartenschacht)
protocol = internal
device = /dev/sci0
emmcache = 1,1,2
detect = CD
group = 1
caid = 1838
cardmhz = 357
mhz = 357
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A 23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156 F9EB64E8168EF09E4D9C5CCA4DD5
boxkey = A7642F57BC96D37C
[reader]
enable = 0
label = Unitymedia I12 (Kartenschacht)
protocol = internal
device = /dev/sci0
emmcache = 1,1,2
detect = CD
group = 1
caid = 1722
cardmhz = 600
mhz = 600
[reader]
enable = 0
label = Kabel BW (Kartenschacht)
protocol = internal
device = /dev/sci1
caid = 098E
detect = cd
boxid = 12345678
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
[reader]
enable = 0
label = cyfraplus (Kartenschacht)
protocol = internal
device = /dev/sci0
caid = 0100
group = 1
emmcache = 1,1,2
mhz = 357
cardmhz = 357
[reader]
enable = 0
label = tnk (Kartenschacht)
protocol = internal
device = /dev/sci0
caid = 0b00
group = 1
emmcache = 1,1,2
#################### External Readers / SMARGO ########################
# Important !!!! Use SMARGO Firmware 1.4 or 1.5 #
# With regard to your Smartcard set up the Reader/Smargo as follows: #
# #
# For Seca, Conax, Cryptoworks, Viaccess, NDS, Nagra #
# Frequency Fixed 3,69 Mhz / Normal / T=0 / EGT = 0 #
# #
# For Irdeto, Betacrypt #
# Frequency Fixed 6,0Mhz / Normal / T=1 / EGT = 0 #
# #
# If SMARGO ist in Autoswitch mode, than activate fitting mhz/cardmhz- #
# Entries in the reader-Section #
# # #
# For Nagra activate and complete the "rsakey = " and "boxkey = " and #
# and remove the # in the smargopatch = 1 line #
# example for HDplus is included #
# #
# for specific Smartcards such as TIGER or Viaccess with AES-Key #
# see the OSCAM documentation #
################################################## ##########################
[reader]
enable = 0
label = HD+ (externer Kartenleser) (weisse Karte)
protocol = mouse
device = /dev/ttyUSB0
emmcache = 1,1,2
detect = CD
group = 1
caid = 1830
cardmhz = 357
mhz = 357
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A 23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156 F9EB64E8168EF09E4D9C5CCA4DD5
boxkey = A7642F57BC96D37C
[reader]
enable = 0
label = HD+ (externer Kartenleser) (schwarze Karte)
protocol = mouse
device = /dev/ttyUSB0
emmcache = 1,1,2
detect = CD
group = 1
smargopatch = 1
caid = 1843
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A 23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156 F9EB64E8168EF09E4D9C5CCA4DD5
boxkey = A7642F57BC96D37C
mhz = 357
cardmhz = 357
[reader]
enable = 0
label = SKY-DE S02 (externer Kartenleser)
protocol = mouse
device = /dev/ttyUSB0
emmcache = 1,1,2
detect = CD
group = 1
caid = 1702,1833
mhz = 600
cardmhz = 600
[reader]
enable = 0
label = SKY-DE V13 (externer Kartenleser)
protocol = mouse
device = /dev/ttyUSB0
detect = CD
group = 1
emmCache = 1,1,2
CAID = 09C4
boxid = 12345678
Mhz = 357
cardmhz = 357
blockemm-g = 1
#ins7e11 = 15
[reader]
enable = 0
label = SKY-DE V14 (externer Kartenleser)
protocol = mouse
device = /dev/ttyUSB0
Detect = CD
Group = 1
EMMCache = 1,1,2
CAID = 098C
boxid = 12345678
Mhz = 357
cardmhz = 357
blockemm-g = 1
#ins7e11 = 15
[reader]
enable = 0
label = ORF ice (externer Kartenleser)
protocol = mouse
device = /dev/ttyUSB0
emmcache = 1,1,2
detect = CD
group = 1
caid = 0648
force_irdeto = 1
rsakey = DF57B08C0F13E67BD17AD37EAAF4EAA25393F8A0EFE8ACE670 8AAF97C985CBA8A6C13826963BD3092EB9FC72F773A4307247 06AA5E1D14E1747842D32069A12D
boxkey = 1122334455667788
mhz = 600
cardmhz = 600
#deprecated = 1
smargopatch = 1
[reader]
enable = 0
label = ORF alt (externer Kartenleser)
protocol = mouse
device = /dev/ttyUSB0
emmcache = 1,1,2
detect = CD
group = 1
caid = 0D05
#ident = OD05:000000,000004,00000C,000008,000010
mhz = 368
cardmhz = 368
smargopatch = 1
[reader]
enable = 0
label = SRG (externer Kartenleser)
protocol = mouse
device = /dev/ttyUSB0
emmcache = 1,1,2
detect = CD
Group = 1
mhz = 357
cardmhz = 357
CAID = 0500
deprecated = 1
smargopatch = 1
[reader]
enable = 0
Label = FreeXTV (externer Kartenleser)
protocol = mouse
device = /dev/ttyUSB0
emmcache = 1,1,2
detect = CD
group = 1
services = srg
caid = 0500
mhz = 357
cardmhz = 368
[reader]
enable = 0
Label = MTV (externer Kartenleser)
protocol = mouse
device = /dev/ttyUSB0
detect = CD
group = 1
emmcache = 1,1,2
caid = 0B00
Mhz = 368
cardmhz = 368
[reader]
enable = 0
label = skyitalia (externer Kartenleser)
protocol = mouse
device = /dev/ttyUSB0
caid = 09CD
boxid = 1412F60A
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
[reader]
enable = 0
label = tivusat (externer Kartenleser)
protocol = mouse
device = /dev/ttyUSB0
caid = 183D
rsakey = A92DA72FEEACF2947B003ED652153B189E4043B0138C368BDF 6B9ED77DDAD6C0761A2198AEB3FC97A19C9D01CA769B3FFFE4 F6E70FA4E0696A8980E18D8C58E11D817121346E3E66457FDD 84CFA72589B25B538EFC304361B54845F39E9EFA52D805E5FD 86B595B366C35716ABC91FA3DC159C9F4D8164B5
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
[reader]
enable = 0
label = cyfraplus (externer Kartenleser)
protocol = mouse
device = /dev/ttyUSB0
caid = 0100
group = 1
emmcache = 1,1,2
detect = CD
[reader]
enable = 0
label = tnk (externer Kartenleser)
protocol = mouse
device = /dev/ttyUSB0
caid = 0b00
group = 1
emmcache = 1,1,2
detect = CD
[reader]
enable = 0
label = KabelD D02 (externer Kartenleser)
protocol = mouse
device = /dev/ttyUSB0
emmcache = 1,1,2
detect = CD
group = 1
mhz = 600
cardmhz=600
CAID = 1722,1834
smargopatch=1
[reader]
enable = 0
Label = KabelD G09 (externer Kartenschacht)
protocol = mouse
device = /dev/ttyUSB0
detect = cd
group = 1
mhz = 357
cardmhz = 357
caid = 09C7
emmcache = 1,1,2
boxid = 12345678
[reader]
enable = 0
label = Unitymedia UM02 (externer Kartenleser)
protocol = mouse
device = /dev/ttyUSB0
emmcache = 1,1,2
detect = CD
group = 1
caid = 1838
cardmhz = 357
mhz = 357
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A 23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156 F9EB64E8168EF09E4D9C5CCA4DD5
boxkey = A7642F57BC96D37C
[reader]
enable = 0
label = Unitymedia I12 (externer Kartenleser)
protocol = mouse
device = /dev/ttyUSB0
emmcache = 1,1,2
detect = CD
group = 1
caid = 1722
cardmhz = 600
mhz = 600
[reader]
enable = 0
label = Kabel BW (externer Kartenleser)
protocol = mouse
device = /dev/ttyUSB0
caid = 098E
detect = cd
boxid = 12345678
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
######################### Remote Readers ##############################
# Important !!!! Use this or not in personal responsibility #
# #
# No support in AAF Forum !!! #
# #
# For further details see the OSCAM documentation #
################################################## ##########################
[reader]
enable = 0
label = cccam-reader (Cardsharing)
protocol = cccam
device = IP/dyndns,PORT
user = USER
password = PASS
group = 1
emmcache = 1,1,2
cccmaxhop = 5
cccversion = 2.0.11
[reader]
enable = 0
label = camd35-reader (Cardsharing)
protocol = camd35
device = IP/dyndns,PORT
user = USER
password = PASS
group = 1
emmcache = 1,1,2
[reader]
enable = 0
label = newcamd-reader (Cardsharing)
protocol = newcamd
key = 0102030405060708091011121314
device = IP/dyndns,PORT
user = USER
password = PASS
group = 1
emmcache = 1,1,2
######## end of file ########
oscam.user
################## General Instruction - oscam.user ####################
# #
# per default no changes from the user are needed #
# #
################################################## ##########################
[account]
user = dvbapi
pwd = dvbapi
group = 1
au = 1
uniq = 0
betatunnel = 1833.FFFF:1702
######## end of file ########