Nokia Dbox2 Kabel "Kernel panic nach flashen"

[Grobistar]

Hallo, meine Nokia Dbox2 Kabel bleibt beim booten mit "Lade Neutrino..." stehen.

Nun habe ich versucht, ein neues Image zu flashen (H*llenberg) und bekomme immer folgenden Fehler :

Kernel panic: Aiee, killing interrupt handler!
In interrupt handler - not syncing
<0>Rebooting in 180 seconds..

habe schon mehrer Images ausprobiert....vielleicht weiß ja jemand Abhilfe....

Log:
nhttpd: /lib/libpng12.so.0: no version information available (required by /lib/liblcddisplay.so.0)
Segmentation fault
neutrino: /lib/libpng12.so.0: no version information available (required by neutrino)
neutrino: /lib/libpng12.so.0: no version information available (required by /lib/liblcddisplay.so.0)
Bad emulation neutrino/915
NIP: 1011a9dc instruction: 00000000 opcode: 0 A: 0 B: 0 C: 0 code: 0 rc: 0
pte @ 0x1011a9dc: (0xc1350100)->(0xc12eb468)->0x0107c889
RPN: 0107c PP: 2 SPS: 1 SH: 0 CI: 0 v: 1
Kernel VA for NIP 0xc107c9dc pte @ 0xc107c9dc: no pmd
Floating point exception
Neutrino exited with nonzero exit status, restarting...
setPauseScanning false
nhttpd: /lib/libpng12.so.0: no version information available (required by /lib/liblcddisplay.so.0)
Segmentation fault
neutrino: /lib/libpng12.so.0: no version information available (required by neutrino)
neutrino: /lib/libpng12.so.0: no version information available (required by /lib/liblcddisplay.so.0)
Bad emulation neutrino/924
NIP: 1011a9dc instruction: 00000000 opcode: 0 A: 0 B: 0 C: 0 code: 0 rc: 0
pte @ 0x1011a9dc: (0xc1350100)->(0xc138c468)->0x0107c889
RPN: 0107c PP: 2 SPS: 1 SH: 0 CI: 0 v: 1
Kernel VA for NIP 0xc107c9dc pte @ 0xc107c9dc: no pmd
Floating point exception
Neutrino exited with nonzero exit status, restarting...
setPauseScanning false
nhttpd: /lib/libpng12.so.0: no version information available (required by /lib/liblcddisplay.so.0)
Segmentation fault
neutrino: /lib/libpng12.so.0: no version information available (required by neutrino)
neutrino: /lib/libpng12.so.0: no version information available (required by /lib/liblcddisplay.so.0)
Bad emulation neutrino/933
NIP: 1011a9dc instruction: 00000000 opcode: 0 A: 0 B: 0 C: 0 code: 0 rc: 0
pte @ 0x1011a9dc: (0xc1350100)->(0xc13d7468)->0x0107c889
RPN: 0107c PP: 2 SPS: 1 SH: 0 CI: 0 v: 1
Kernel VA for NIP 0xc107c9dc pte @ 0xc107c9dc: no pmd
Floating point exception
Neutrino exited with nonzero exit status, restarting...
setPauseScanning false
ºdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID http://Hallenberg.com
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.178.24, My IP 192.168.178.202
debug: Sending TFTP-request for file u-boot
will verify ELF image, start= 0x800000, size= 140064
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


U-Boot 1.3.4 (Tuxbox - Hallenberg.com) (Nov 29 2008 - 23:53:59)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.178.24; our IP address is 192.168.178.202
Filename 'u-boot'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.178.24; our IP address is 192.168.178.202
Filename 'logo-lcd'.
Load address: 0x100000
Loading: ##
done
Bytes transferred = 7680 (1e00 hex)
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.178.24; our IP address is 192.168.178.202
Filename 'u-boot'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.178.24; our IP address is 192.168.178.202
Filename 'logo-fb'.
Load address: 0x100000
Loading: ####################################
done
Bytes transferred = 179877 (2bea5 hex)

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
Using SCC ETHERNET device
TFTP from server 192.168.178.24; our IP address is 192.168.178.202
Filename 'kernel-cdk'.
Load address: 0x100000
Loading: ################################################## ###############
################################################## ########
done
Bytes transferred = 627048 (99168 hex)
Using SCC ETHERNET device
TFTP from server 192.168.178.24; our IP address is 192.168.178.202
Filename 'u-initrd'.
Load address: 0x400000
Loading: ################################################## ###############
##################################################
done
Bytes transferred = 586812 (8f43c hex)
.................................................. ............. done
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 626984 Bytes = 612.3 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
## Loading RAMDisk Image at 00400000 ...
Image Name: Ramdisk Image
Image Type: PowerPC Linux RAMDisk Image (gzip compressed)
Data Size: 586748 Bytes = 573 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Loading Ramdisk to 01f1f000, end 01fae3fc ... OK
Linux version 2.4.36.9-dbox2 (Hallenberg.com) (gcc version 3.4.6) #1 Sa 29. Nov 23:29:22 CET 2008
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/ram rw ip=192.168.178.202:192.168.178.24:::::off
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30348k available (1048k kernel code, 324k data, 72k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGÿttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
half-duplex mode enabled
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1b:49:3f
RAMDISK driver initialized: 16 RAM disks of 3333K size 1024 blocksize
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006a0000 : "root (rootfs)"
0x006a0000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
IP-Config: Guessing netmask 255.255.255.0
IP-Config: Complete:
device=eth0, addr=192.168.178.202, mask=255.255.255.0, gw=255.255.255.255,
host=192.168.178.202, domain=, nis-domain=(none),
bootserver=192.168.178.24, rootserver=192.168.178.24, rootpath=
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 572k freed
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 72k init
init started: BusyBox v1.13.0 (2008-11-29 23:52:02 CET
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface


















dbox2 - ImageFlashingAssistent 3.x

- Hallenberg.com -



Schreibe Backup: 8064k von 8064k (100%)
Lade Flashimage...
Oops: kernel access of bad area, sig: 11
NIP: C000D210 XER: 00000000 LR: C000D1CC SP: C01215E0 REGS: c0121530 TRAP: 0300 Not tainted
MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: C8BE6000, DSISR: C0000000
TASK = c011f910[0] 'swapper' Last syscall: 120
last math 00000000 last altivec 00000000
GPR00: 00001032 C01215E0 C011F910 C01215EC 00009032 00000001 00000400 C01680E0
GPR08: C01679A0 C0120000 C1F0CE04 C6A4092C 24302022 1004F170 01FFB400 00000001
GPR16: FFFFFFFF 007FFF00 01FF5940 00000000 00001032 C0140000 C0121768 C0140000
GPR24: C01222E8 00000001 00000001 C1AD092C 0000020C C1081014 C8BE6000 C01215E0
Call backtrace:
C0017874 C00B59A8 C00EF9C0 C00EFE2C C00CC400 C00CC80C C00BB0E0
C00BB1FC C00BB360 C00157E4 C0004864 C00036E0 C0004F78 C0004F94
C012F42C C0002138
Kernel panic: Aiee, killing interrupt handler!
In interrupt handler - not syncing
<0>Rebooting in 180 seconds..debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID http://Hallenberg.com
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.178.24, My IP 192.168.178.202
debug: Sending TFTP-request for file u-boot
will verify ELF image, start= 0x800000, size= 140064
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


U-Boot 1.3.4 (Tuxbox - Hallenberg.com) (Nov 29 2008 - 23:53:59)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.178.24; our IP address is 192.168.178.202
Filename 'u-boot'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.178.24; our IP address is 192.168.178.202
Filename 'logo-lcd'.
Load address: 0x100000
Loading: ##
done
Bytes transferred = 7680 (1e00 hex)
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.178.24; our IP address is 192.168.178.202
Filename 'u-boot'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.178.24; our IP address is 192.168.178.202
Filename 'logo-fb'.
Load address: 0x100000
Loading: ####################################
done
Bytes transferred = 179877 (2bea5 hex)

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
Using SCC ETHERNET device
TFTP from server 192.168.178.24; our IP address is 192.168.178.202
Filename 'kernel-cdk'.
Load address: 0x100000
Loading: ################################################## ###############
################################################## ########
done
Bytes transferred = 627048 (99168 hex)
Using SCC ETHERNET device
TFTP from server 192.168.178.24; our IP address is 192.168.178.202
Filename 'u-initrd'.
Load address: 0x400000
Loading: ################################################## ###############
##################################################
done
Bytes transferred = 586812 (8f43c hex)
.................................................. ............. done
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 626984 Bytes = 612.3 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
## Loading RAMDisk Image at 00400000 ...
Image Name: Ramdisk Image
Image Type: PowerPC Linux RAMDisk Image (gzip compressed)
Data Size: 586748 Bytes = 573 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Loading Ramdisk to 01f1f000, end 01fae3fc ... OK
Linux version 2.4.36.9-dbox2 (Hallenberg.com) (gcc version 3.4.6) #1 Sa 29. Nov 23:29:22 CET 2008
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/ram rw ip=192.168.178.202:192.168.178.24:::::off
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.76 BogoMIPS
Memory: 30348k available (1048k kernel code, 324k data, 72k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGÿttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
half-duplex mode enabled
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1b:49:3f
RAMDISK driver initialized: 16 RAM disks of 3333K size 1024 blocksize
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006a0000 : "root (rootfs)"
0x006a0000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
IP-Config: Guessing netmask 255.255.255.0
IP-Config: Complete:
device=eth0, addr=192.168.178.202, mask=255.255.255.0, gw=255.255.255.255,
host=192.168.178.202, domain=, nis-domain=(none),
bootserver=192.168.178.24, rootserver=192.168.178.24, rootpath=
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 572k freed
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 72k init
init started: BusyBox v1.13.0 (2008-11-29 23:52:02 CET
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface


















dbox2 - ImageFlashingAssistent 3.x

- Hallenberg.com -



Schreibe Backup: 8064k von 8064k (100%)
Lade Flashimage...
Oops: kernel access of bad area, sig: 11
NIP: C000D210 XER: 00000000 LR: C000D1CC SP: C01215E0 REGS: c0121530 TRAP: 0300 Not tainted
MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: C8A4C000, DSISR: C0000000
TASK = c011f910[0] 'swapper' Last syscall: 120
last math 00000000 last altivec 00000000
GPR00: 00001032 C01215E0 C011F910 C01215EC 00009032 00000001 00000400 C01680E0
GPR08: C01679A0 C0120000 C1F0CE04 C4A47CCC 24202022 1004F170 01FFB400 00000001
GPR16: FFFFFFFF 007FFF00 01FF5940 00000000 00001032 C0140000 C0121768 C0140000
GPR24: C01222E8 00000001 00000001 C1AF7CCC 0000020C C1081014 C8A4C000 C01215E0
Call backtrace:
00000001 C00B59A8 C00EF9C0 C00EFE2C C00CC400 C00CC80C C00BB0E0
C00BB1FC C00BB360 C00157E4 C0004864 C00036E0 C0004F78 C0004F94
C012F42C C0002138
Kernel panic: Aiee, killing interrupt handler!
In interrupt handler - not syncing
<0>Rebooting in 180 seconds..
-------------------------------------------------------------
BootP: Request von 00509C1B493F erhalten
Error DeleteIpNetEntry: Element nicht gefunden.

BootP: ARP-Eintrag mit IP: 192.168.178.202 und Mac: 00509C1B493F gesetzt
BootP: Antwort an 00509C1B493F gesendet
TFTP: Sende C:\Program Files (x86)\DBOX_IFA\tftp\u-boot
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C1B493F erhalten
BootP: ARP-Eintrag mit IP: 192.168.178.202 und Mac: 00509C1B493F gesetzt
BootP: Antwort an 00509C1B493F gesendet
TFTP: Sende C:\Program Files (x86)\DBOX_IFA\tftp\logo-lcd
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C1B493F erhalten
BootP: ARP-Eintrag mit IP: 192.168.178.202 und Mac: 00509C1B493F gesetzt
BootP: Antwort an 00509C1B493F gesendet
TFTP: Sende C:\Program Files (x86)\DBOX_IFA\tftp\logo-fb
TFTP: Transfer erfolgreich beendet
TFTP: Sende C:\Program Files (x86)\DBOX_IFA\tftp\kernel-cdk
TFTP: Transfer erfolgreich beendet
TFTP: Sende C:\Program Files (x86)\DBOX_IFA\tftp\u-initrd
TFTP: Transfer erfolgreich beendet
TFTP: Sende C:\usb-stick\Keywelt_V1.00_Juli_2x_KABEL.img
TFTP: Transfer nicht erfolgreich
BootP: Request von 00509C1B493F erhalten
BootP: ARP-Eintrag mit IP: 192.168.178.202 und Mac: 00509C1B493F gesetzt
BootP: Antwort an 00509C1B493F gesendet
TFTP: Sende C:\Program Files (x86)\DBOX_IFA\tftp\u-boot
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C1B493F erhalten
BootP: ARP-Eintrag mit IP: 192.168.178.202 und Mac: 00509C1B493F gesetzt
BootP: Antwort an 00509C1B493F gesendet
TFTP: Sende C:\Program Files (x86)\DBOX_IFA\tftp\logo-lcd
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C1B493F erhalten
BootP: ARP-Eintrag mit IP: 192.168.178.202 und Mac: 00509C1B493F gesetzt
BootP: Antwort an 00509C1B493F gesendet
TFTP: Sende C:\Program Files (x86)\DBOX_IFA\tftp\logo-fb
TFTP: Transfer erfolgreich beendet
TFTP: Sende C:\Program Files (x86)\DBOX_IFA\tftp\kernel-cdk
TFTP: Transfer erfolgreich beendet
TFTP: Sende C:\Program Files (x86)\DBOX_IFA\tftp\u-initrd
TFTP: Transfer erfolgreich beendet
TFTP: Sende C:\usb-stick\Keywelt_V1.00_Juli_2x_KABEL.img
TFTP: Transfer nicht erfolgreich

[Satfan123]

könnte man meinen der flash ic hat einen an der klatsche

[Grobistar]

...also müssten beide Flashbausteine ausgetauscht werden, sehe ich das richtig !

[lars.berlin]

...also müssten beide Flashbausteine ausgetauscht werden, sehe ich das richtig !

Ja, macht sehr gerne und jetzt auch preiswert: www.irata.de


Greetz Larsi.