OSCAM + CCcam + Freetz: diverse Fehler

[c.monty]

hallo!
ich habe den (empfohlenen) cardreader zusammen mit USB stick an König USB hub (aktiv) angeschlossen.
der kartenleser wird mit 3,57MHz betrieben, d.h. Jumper ist auf Position Q1.
auf der FB läuft Freetz -devel-4965_4968M
mit CCcam 2.1.1 server und
OSCam cardserver v0.99.4svn, build #2085 (mips-wrt54g-linux).
ich starte zuerst OSCAM manuell über telnet und kurz danach CCcam über WebIF.
oscam.log

>> OSCam <<  cardserver started at Fri Jul  9 23:37:26 2010
-------------------------------------------------------------------------------
2010/07/09 23:37:26   3061 s   version=0.99.4svn, build #2085, system=mips-wrt54g-linux, nice=-1
2010/07/09 23:37:26   3061 s   max. clients=29, client max. idle=120 sec
2010/07/09 23:37:26   3061 s   max. logsize=unlimited
2010/07/09 23:37:26   3061 s   client timeout=5000 ms, fallback timeout=5000 ms, cache delay=120 ms
2010/07/09 23:37:26   3061 s   shared memory initialized (size=554240, fd=3)
2010/07/09 23:37:26   3061 s   WARNING: fallbacktimeout adjusted to 4900 ms (must be smaller than clienttimeout (5000 ms))
2010/07/09 23:37:26   3061 s   auth size=4752
2010/07/09 23:37:26   3061 s   services reloaded: 0 services freed, 1 services loaded
2010/07/09 23:37:26   3061 s   userdb reloaded: 0 accounts freed, 2 accounts loaded, 0 expired, 0 disabled
2010/07/09 23:37:26   3061 s   signal handling initialized (type=sysv)
2010/07/09 23:37:29   3061 s   10900 service-id's loaded
2010/07/09 23:37:29   3061 s   22 lengths for caid guessing loaded
2010/07/09 23:37:29   3061 s   monitor: initialized (fd=9, port=988)
2010/07/09 23:37:29   3061 s   camd 3.3x: disabled
2010/07/09 23:37:29   3061 s   camd 3.5x: disabled
2010/07/09 23:37:29   3061 s   cs378x: disabled
2010/07/09 23:37:29   3061 s   newcamd: initialized (fd=10, port=12345, crypted)
2010/07/09 23:37:30   3061 s   CAID: 1830
2010/07/09 23:37:30   3061 s   provid #0: 000000
2010/07/09 23:37:30   3061 s   cccam: disabled
2010/07/09 23:37:30   3061 s   radegast: disabled
2010/07/09 23:37:30   3061 s   client resolver thread started
2010/07/09 23:37:30   3061 s   logger started (pid=3064)
2010/07/09 23:37:30   3061 s   resolver thread started
2010/07/09 23:37:30   3061 s   http started (pid=3066)
2010/07/09 23:37:30   3061 s   reader started (pid=3067, device=/dev/ttyUSB1, detect=cd, mhz=1000, cardmhz=600)
2010/07/09 23:37:30   3061 s   waiting for local card init
2010/07/09 23:37:32   3066 h   HTTP Server listening on port 23456
2010/07/09 23:37:32   3067 r02 ERROR opening device /dev/ttyUSB1
2010/07/09 23:37:33   3061 s   init for all local cards done
2010/07/09 23:37:33   3061 s   anti cascading disabled
2010/07/09 23:37:33   3067 r02 Cannot open device: /dev/ttyUSB1
2010/07/09 23:38:34   3067 r02 ERROR opening device /dev/ttyUSB1
2010/07/09 23:38:34   3067 r02 Cannot open device: /dev/ttyUSB1
2010/07/09 23:39:40   3067 r02 ERROR opening device /dev/ttyUSB1
2010/07/09 23:39:40   3067 r02 Cannot open device: /dev/ttyUSB1
2010/07/09 23:40:45   3067 r02 ERROR opening device /dev/ttyUSB1
2010/07/09 23:40:46   3067 r02 Cannot open device: /dev/ttyUSB1
2010/07/09 23:41:50   3067 r02 ERROR opening device /dev/ttyUSB1
2010/07/09 23:41:51   3067 r02 Cannot open device: /dev/ttyUSB1
2010/07/09 23:42:53   3067 r02 ERROR opening device /dev/ttyUSB1
2010/07/09 23:42:53   3067 r02 Cannot open device: /dev/ttyUSB1
2010/07/09 23:43:58   3067 r02 ERROR opening device /dev/ttyUSB1
2010/07/09 23:43:59   3067 r02 Cannot open device: /dev/ttyUSB1
2010/07/09 23:44:00   3061 s   client(1) connect from 127.0.0.1 (pid=3628, pipfd=17)
2010/07/09 23:44:49   3066 h   Refresh Server requested by WebIF from 192.168.178.11
2010/07/09 23:45:02   3067 r02 ERROR opening device /dev/ttyUSB1
2010/07/09 23:45:02   3067 r02 Cannot open device: /dev/ttyUSB1
2010/07/09 23:45:15   3628 c01 user benutzer is trying to connect but doesnt exist ! (CCcam)

CCcam.cfg

### CLIENTS
F: benutzer passwort 2 0 1 { 0:0:1 } {} {}
### SERVER
N: 127.0.0.1 12345 benutzer passwort 01 02 03 04 05 06 07 08 09 10 11 12 13 14
SERVER LISTEN PORT : 67890
ALLOW WEBINFO: yes
SHOW EXTENEDED CLIENT INFO : yes
WEBINFO LISTEN PORT : 78901
WEBINFO USERNAME : benutzer
WEBINFO PASSWORD : passwort
#Minimum Downhops: 1
Softkey File : /var/media/ftp/uStor01/emu/cccam/Softcam.Key
Autoroll File : /var/media/ftp/uStor01/emu/cccam/Autoroll.Key
Static Cw File : /var/media/ftp/uStor01/emu/cccam/Constant.Cw
Caid Prio File : /var/media/ftp/uStor01/emu/cccam/Cccam.Prio
Providerinfo File : /var/media/ftp/uStor01/emu/cccam/Cccam.Providers
Channelinfo File : /var/media/ftp/uStor01/emu/cccam/Cccam.Channelinfo
#MINIMUM CLIENT VERSION : 2.0.9
DISABLE EMM : no
EXTRA EMM LEVEL : no
SHOW TIMING : yes
DEBUG : yes
LOG WARNINGS : /var/media/ftp/uStor01/logs/cccam.log

oscam.conf

[global]
Nice = -1
WaitForCards = 1
ClientTimeout = 5
FallbackTimeout = 5
ClientMaxIdle = 120
Level = 15
CacheDelay = 120
BindWait = 20
ResolveDelay = 15
LogFile = /var/media/ftp/uStor01/logs/oscam.log
#LogFile = /var/cache/oscam.log
#LogFile = /dev/null
PidFile = /var/run/oscam.pid
usrfile = /var/media/ftp/uStor01/emu/oscam/oscam.user
Sleep = 0
[monitor]
port                = 988
nocrypt             = 192.168.178.0-192.168.178.255
aulow               = 120
hideclient_to       = 60
monlevel            = 2
appendchaninfo      = 0
[webif]
httpport            = 23456
httpuser            = benutzer
httppwd             = passwort
httpcss             = 
httptpl             = 
httpscript          = 
httprefresh         = 0
httpallowed         = 192.168.178.0-192.168.178.255
httpdyndns          = 
httphideidleclients = 0
httpreadonly        = 0
# Protocols
# camd35
#[cs357x]
#Port = 33461
[newcamd]
Port = 12345@1830:000000
key                 = 0102030405060708091011121314
#allowed             = 
keepalive           = 1

oscam.user

[account]
User 			= monitor
Pwd 			= monitor
Group 			= 1
MonLevel 		= 4
[account]
user = benutzer
pwd = passwort
group = 1
#AU = SkyHD
#CAID = 1830

oscam.server

[reader]
label = sky
enable = 1
protocol = mouse
device = /dev/ttyUSB1
services = sky
caid = 1702&FFFF
detect = cd
mhz = 1000
cardmhz = 600
ident = 1702:000000
group = 2
emmcache = 1,3,2
ecmcache = 1
blockemm-unknown = 1
blockemm-u = 1
blockemm-g = 1
lb_weight = 100

aus dem oscam.log entnehme ich, dass
a) der cardreader nicht gefunden wird
b) der connect von cccam nicht funktioniert.
ich weiß jetzt nicht mehr weiter, bitte um unterstützung.
THX

[donfaustino]

die Fehlermeldung ist doch eindeutig:

ERROR opening device /dev/ttyUSB1

Bist du dir sicher das die smartmouse an USB1 und nicht an USB0 hängt? Check das Syslog wenn du die smartmouse/smargo ansteckst. Da stehts drin.

Edit: solange oscam nicht sauber läuft und im Webif die Entitlements der Karte anzeigt brauchst du cccam erst garnicht anstarten.