Hallo Spinnes Welt,
Mir fehlt nur noch ein kleiner Schritt, damit das ganze funktioniert. Mit S02
Der Client ist an NewCs verbunden, die Uhr Tickt aber keine EMM´s !!! Das Bild ist dunkel beim Client !!!
Die FB verbindet sich bei NewCs, aber leider werden keine EMM´ s gesendet an den Client ! Das kann ich über Iexplorer bei NewCs sehen !
Client über MgCamd oder Camd3: User: test Passwort: test
++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++++++++++++
++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++++++++++++
++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++++++++++++
Einstellungen bei Fritzbox bei Cccam.cfg:
N: 127.0.0.1 10003 root admin 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
SERVER LISTEN PORT : 61478
ALLOW WEBINFO: yes
SHOW EXTENEDED CLIENT INFO : yes
WEBINFO LISTEN PORT : 67880
WEBINFO USERNAME : cccam
WEBINFO PASSWORD : password
Minimum Downhops: 1
Softkey File : /var/media/ftp/uStor01/emu/cccam/Softcam.Key
Autoroll File : /var/media/ftp/uStor01/emu/cccam/Autoroll.Key
Static Cw File : /var/media/ftp/uStor01/emu/cccam/Constant.Cw
Caid Prio File : /var/media/ftp/uStor01/emu/cccam/Cccam.Prio
Providerinfo File : /var/media/ftp/uStor01/emu/cccam/Cccam.Providers
Channelinfo File : /var/media/ftp/uStor01/emu/cccam/Cccam.Channelinfo
PHOENIX READER : /dev/ttyUSB0
# SERIAL READER : /dev/ttyUSB0
# SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 3570000
++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++++++++++++
++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++++++++++++
++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++++++++++++
Meine NewCS von Fritzbox:
<newCSconfig>
<globals>
<listening-ip>192.168.1.30</listening-ip>
</globals>
<readers name="Phoenix">
<device>
<name>pl2303</name>
<type>phoenix</type>
<mhz>600</mhz>
<node>/dev/ttyUSB0</node>
<parity>ODD</parity>
<reset>inverse</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<boxkey>0000000000</boxkey>
<rsa>0000000000</rsa>
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</ipk>
<ucpk>00000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 000000000000</ucpk>
<PTShandshake>Yes</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>10003</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
<device>
<name>ftdi</name>
<type>phoenix</type>
<mhz>357</mhz>
<node>/dev/ttyUSB1</node>
<parity>Odd</parity>
<reset>Inverse</reset>
<export>Yes</export>
<enabled>No</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<boxkey>0000000000</boxkey>
<rsa>0000000000</rsa>
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</ipk>
<ucpk>00000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 000000000000</ucpk>
<PTShandshake>Yes</PTShandshake>
<carddetect>Yes</carddetect>
<newcamd_port>15014</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
</readers>
<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
<httpd>
<server>
<port>18080</port>
<enabled>yes</enabled>
</server>
<user>
<name>newcs</name>
<password>newcs</password>
<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>
<password>newcs</password>
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<tcp_port>1001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>root</name>
<password>admin</password>
<hostname>localhost</hostname>
<port>10003</port>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
<rate>0</rate>
</user>
<user><name>test</name><password>test</password><hostname></hostname><port></port><au>yes</au><spider>yes</spider><sidoverride>yes</sidoverride><rate>0</rate></user></newcamdserver>
</newCSconfig>
++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++++++++++++
++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++++++++++++
++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++++++++++++
Meine Log Datei von Fritzbox:
rc.mod version freetz-devel-4581M
crond is disabled
telnetd is disabled
Starting Freetz webinterface...done.
syslogd is disabled
callmonitor is disabled
strings: /usr/sbin/vsftpd: No such file or directory
vsftpd is disabled
httpd-wol is disabled
openvpn is disabled
samba is disabled
inadyn-mt is disabled
transmission is disabled
Starte CCcam...
mknod: /dev/ttyUSB0: File exists
mknod: /dev/ttyUSB1: File exists
mknod: /dev/ttyUSB2: File exists
mknod: /dev/ttyUSB3: File exists
USB-Serial Module geladen
Softlink auf USB Stick Lib's erstellt
CCcam gestartet
mbox is disabled
mpcs is disabled
Starte NewCS-Cardserver...
NewCS-Server gestartet!
/var/media/ftp/uStor01/emu/newcs/newcs.start: line 14: can't create /dev/pts/0: Input/output error
/var/media/ftp/uStor01/emu/newcs/newcs.start: line 14: can't create /dev/pts/0: Input/output error
This is NewCS 1.65 - the New CardServer by the Butter-team..
Compiled on Jan 19 2009 at 17:57:36
Reading Config file from /var/media/ftp/uStor01/emu/newcs/newcs.xml
NewCS is trying to bind to IP: 192.168.1.30
TCP-log password is disabled!
TCP-log set to simple mode
level: normal
type: init
output: console,tcp
logger config: level 1 type 3 output 5
Console log options: level 1 type 3
TCP log options: level 1 type 3
[ 01:01:33 ] [ Box detect ] Box type 1 (General Boxtype - PC compatible)
[ 01:01:33 ] [ Config ] Option <blockc0> for device 0 (pl2303) not present, defaulting to NO
[ 01:01:33 ] [ Config ] Value in <rsa> for device 0 (pl2303) is INVALID, skipping...
[ 01:01:33 ] [ Config ] Value in <ipk> for device 0 (pl2303) is INVALID, skipping...
[ 01:01:33 ] [ Config ] Value in <ucpk> for device 0 (pl2303) is INVALID, skipping...
[ 01:01:33 ] [ Config ] Pincode for device 0 (pl2303): 0000
[ 01:01:33 ] [ Config ] /dev/ttyUSB0 ECM priority: round
[ 01:01:34 ] [ httpd ] httpd-user: newcs, password: newcs, accesslevel: admin
[ 01:01:34 ] [ EMM Cache ] Initialising dynamic Cache
[ 01:01:34 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 1482
[ 01:01:34 ] [ Loader ] Starting Telnet on port 1001
[ 01:01:34 ] [ Loader ] Started HTTP-server on port: 18080
[ 01:01:34 ] [ Loader ] Reader type 2 on node /dev/ttyUSB0
[ 01:01:34 ] [ Phoenix ] Opening device /dev/ttyUSB0
[ 01:01:34 ] [ Phoenix ] Setting Parity to: ODD
[ 01:01:34 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0
[ 01:01:34 ] [ Phoenix ] Setting Baud to custom 16129
oscam is disabled
[ 01:01:35 ] [ Phoenix ] Inverse RESET on node /dev/ttyUSB0
scam is disabled
swap is disabled
[ 01:01:36 ] [ Loader ] Unknown card
[ 01:01:36 ] [ Loader ] Trying Irdeto (T=14)
[ 01:01:36 ] [ Loader ] Reader type 2 on node /dev/ttyUSB0
[ 01:01:36 ] [ Phoenix ] Opening device /dev/ttyUSB0
[ 01:01:36 ] [ Phoenix ] Setting Parity to: ODD
[ 01:01:36 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0
[ 01:01:36 ] [ Phoenix ] Setting Baud to standard 9600
[ 01:01:37 ] [ Phoenix ] Inverse RESET on node /dev/ttyUSB0
[ 01:01:39 ] [ ATR ] T=0 1etu=62.00us Guardtime:12etu WWT:9600etu
[ 01:01:39 ] [ ATR ] Historical bytes: [00] [00] [00] [00] [00] [00] [00] [00] [00] [00] [00] [00] [00] [00] [00]
[ 01:01:39 ] [ Loader ] Init Irdeto card
[ 01:01:39 ] [ Phoenix ] Setting Parity to: NONE
[ 01:01:39 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0
[ 01:01:39 ] [ Phoenix ] Setting Baud to custom 16129
[ 01:01:42 ] [ Loader ] Card 0600 on port /dev/ttyUSB0 failed
[ 01:01:42 ] [ Loader ] Starting Newcamd Server on port 10003
[ 01:01:42 ] [ NewCS ] Ready to GO! :)
[ 01:01:42 ] [ Newcamd ] Newcamd thread Server started on port 10003
killall: sed: no process killed
newcamd: main loop
[ 01:04:53 ] [ httpd ] User newcs logged in..
[ 01:05:44 ] [ Newcamd:10003 ] User test logged in, client: Mgcamd
[ 01:07:43 ] [ httpd ] User newcs logged in..
Zitieren