Zitat Zitat von sammy909 Beitrag anzeigen
Hi, so sieht es in etwa bei mir aus. mpcs 1.0.6.4. HD wird automatisch gemappt. Newcs brauchst du nicht.
config
Code:
[global]
Nice            = -10
ClientTimeout   = 4
ClientMaxIdle   = 60
CacheDelay      = 150
FallbackTimeout = 1
BindWait        = 10
ResolveDelay    = 10
DyndnsInterval  = 120
#LogFile         = stdout
#PidFile         = /ramdsk/my.pid
#MaxLogSize     = 1024
showecmdw = 0
showemmdw = 0
disablecache1 = 0
disablecache2 = 0
disablecache = 0
Filter = 0
[newcamd]
Key  = 0103050709111315171921232527
Port = 50...@1702:000000;50...@0D05:000004
              Sky und HD               ORF
[MONITOR]
Port =988
AULow =120
MonLevel =0
NoCrypt =127.1.1.1
NoCrypt =10.0.0.0-10.255.255.255
NoCrypt =172.16.0.0-172.31.255.255
NoCrypt =192.168.0.0-192.168.255.255
# -- camd 3.5x ----------------------------------------------------------------
# Port            : Port-Number (0 disables this protocol)
# ServerIP        : bind service to ONE dedicated ip-address
# -----------------------------------------------------------------------------
#[cs378x]
#Port        = 54343
[cs357x]
#Port        = 50250
# -- DVB demuxer/descrambler (for dreambox) -----------------------------------
# Enable           : 0 disbable, 1 enable
# -----------------------------------------------------------------------------
#[dvb]
#Enable              = 0
reader
Code:
[reader]
#blockemm         = C0,03,02
blockua          = 0
blockga          = 0
blocksa          = 0
AU               = 1
Enable           = 1
Label            = multicam
Protocol         = mouse
Device           = /dev/tts/1
##pincode        = 7291
#BaudRate		 = 16000
#bits     		 = 7/8
#stopbits 		 = 1/2
##parity   = odd/even/none
##flowcontrol= hard/soft/none
PTS				 = 1
EMMCache         = 1,3,2
Detect           = CD
Group            = 1
Fallback         = 0
CAID	         = 1702,1833
#ChID = 0604:02,03,04,05,06,07,0E
[reader]
#blockemm         = C0,03,02
blockua          = 0
blockga          = 0
blocksa          = 0
AU               = 1
Enable           = 1
Label            = reader
Protocol         = mouse
Device           = /dev/tts/0
##pincode        = 7291
#BaudRate		 = 16000
#bits     		 = 7/8
#stopbits 		 = 1/2
##parity   = odd/even/none
##flowcontrol= hard/soft/none
PTS				 = 1
EMMCache         = 1,3,2
Detect           = CD
Group            = 2
Fallback         = 0
CAID	         = 0D05
#
##===========================================================
## EMM over cascading
#[reader]
#Label          = mynewcamd
#Protocol       = newcamd
#Key            = 0102030405060708091011121314
#Device         = 11.11.12.12,1000
#Account        = ddds,2212
#Fallback       = 1
#Group          = 1
#CAID	         = 0604
#ChID = 0604:02,03,04,06,07
#InactivityTimeout = 2
#EMMCache         = 1,1,10
#blockua          = 0
#blockga          = 0
#blocksa          = 0
#AU               = 1
user
Code:
[account]
User = testuser1
Pwd = testpassword1
CAID = 1702,0D05
Group = 1,2
AU = multicam,reader
MonLevel = 4
newcamd.list MGcamd
Code:
CWS_KEEPALIVE =300
CWS_MULTIPLE = dyndns... 50...:50... testuser1 testpassword1 01 03 05 07 09 11 13 15 17 19 21 23 25 27 lan server2


cool, ich danke dir.
ich werde es mal 1 zu 1 übernehmen

gruss langer