Da bin ich wieder... heute kann NewCS die Karte aus heiterem Himmel nichtm ehr initialisieren. Es geschah einfach ohne Vorankündigung... Camd3 auf der Kathi hat nicht mehr entschlüsselt... als ich NewCS dann neustartete, sah ich nur noch Folgendes:
[SCRIPT] start: NewCS Server
This is NewCS 1.66 [Build: 82] - the New CardServer by the Butter-team..
Compiled on May 22 2009 at 11:54:29
Reading Config file from /etc/newcs.xml
TCP-log password is enabled, set to: NewCSpwd
TCP-log set to simple mode
level: normal
type: init
output: console,tcp
logger config: level 1 type 3 output 5
Console log options: level 1 type 3
TCP log options: level 1 type 3
[ 23:58:09 ] [ Box detect ] Box type 1 (General Boxtype - Generic)
[ 23:58:09 ] [ Config ] Option <blockc0> for device 0 (Phoenix Interface) not present, defaulting to NO
[ 23:58:09 ] [ Config ] Value in <ipk> for device 0 (Phoenix Interface) is INVALID, skipping...
[ 23:58:09 ] [ Config ] Value in <ucpk> for device 0 (Phoenix Interface) is INVALID, skipping...
[ 23:58:09 ] [ Config ] Pincode for device 0 (Phoenix Interface): xxxx
[ 23:58:09 ] [ Config ] /dev/ttyUSB0 ECM priority: round
[ 23:58:09 ] [ httpd ] httpd-user: xxxxxxxx, password: xxxxxxxx, accesslevel: admin
[ 23:58:09 ] [ EMM Cache ] Initialising dynamic Cache
[ 23:58:09 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 3583
[ 23:58:09 ] [ Loader ] Starting Telnet on port 1001
[ 23:58:09 ] [ Loader ] Started HTTP-server on port: 20199
[ 23:58:09 ] [ Loader ] Reader type 2 on node /dev/ttyUSB0
[ 23:58:09 ] [ Phoenix ] Opening device /dev/ttyUSB0
[ 23:58:09 ] [ Phoenix ] Setting Parity to: ODD
[ 23:58:09 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0
[ 23:58:09 ] [ Phoenix ] Setting Baud to standard 9600
[ 23:58:10 ] [ Phoenix ] Normal RESET on node /dev/ttyUSB0
[ 23:58:12 ] [ ATR ] T=14 1etu=175.01us Guardtime:17etu WWT:9600etu
[ 23:58:12 ] [ ATR ] Historical bytes: m [00] [00] [00] [00] [00] [00] [00] [00] [00] [00] [00] [00] [00] [00]
[ 23:58:12 ] [ Loader ] Init Irdeto card
[ 23:58:12 ] [ Phoenix ] Setting Parity to: NONE
[ 23:58:12 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0
[ 23:58:12 ] [ Phoenix ] Setting Baud to custom 5713
[ 23:58:19 ] [ Loader ] Card 0600 on port /dev/ttyUSB0 failed
[ 23:58:19 ] [ Loader ] Starting Newcamd Server on port 15000
[ 23:58:19 ] [ Newcamd ] Newcamd thread Server started on port 15000
[ 23:58:19 ] [ NewCS ] Ready to GO! :)
Was ist da passiert? Ist die Karte im Eimer? Ist der Smargo plötzlich im Eimer? Wie gesagt... es geschah im laufenden Betrieb ohne Änderungen am Server.
Unplug & Replug vom Smargo und der Karte bringen keine Änderung... auch Neustart des Servers und Neu-Flashen des Smargo auf 1.4 hat nichts gebracht (er war vorher auch schon auf 1.4).
Was tun?
