CS: kathi 910 mit camd3 auf newcs verbinden

[dirk01]

Nein, diese zwei Zeilen brauchst du nicht.

Hier gibt es noch eine Anleitung für die Kathi + NewCS:
http://www.spinnes-board.de/vb/showthread.php?t=136092

[Kuppi]

Genau so wie dirk01 geschrieben hat ist es richtig, da gibt es nichts mehr hinzuzufügen.

Gruß,
Kuppi...

[seven-eleven]

danke dirk01, ich habe jetzt nochmal deine anleitungen in den anderen threads durchgelesen und alles entsprechend eingestellt.
ich habe auch an der fritzbox den port 25000 an die kathi weitergeleitet.
Leider bleibt es weiterhin dunkel.

im newcs webinterface werden weiterhin nur die Bd ECM's und EMM's hochgezählt, aber keine ok ECM's!


hier nochmals die configs und das log:


mgcamd log:

tuxbox mgcamd v1.35 by mixvt (compiled Jan 20 2010 22:15:45)
[mg] Net:1:7:2:5s Show ecm:1, emm:1 Up:1 Au:2 Dir:0 Osd:no:80:0 Cache:7 Log:4:172.16.1.1:28007 Reread:0
[mg] Ecm cache time: 15
Box type: dbox2
Conax.Key error 2: No such file or directory
Keys readed
AutoRoll.Key error 2: No such file or directory
Conax.Key error 2: No such file or directory
[config] newcamd route = user1:192.168.178.1:25000 server cardserv
newcamd keep alive: 0, incoming port: 0
[mgcam] emm thread started
[newcamd] Connecting to 192.168.178.1:25000...
[newcamd] Login to 192.168.178.1:25000 as user1 accepted (90ms)
[newcamd] Card data from 192.168.178.1:25000 (90ms):
EMM enabled: UA yes SA yes GA yes, Card serial: xxxxxxx
Userid 1 caid 1702 providers 4
Idents: 000000 000001 000002 000003
ids: FFFFFF FFFFFF FFFFFF FFFFFF

got 78 cmd 9F
[mg0] namespace C00000 t-id 4 on-id 85
[mg0] descramble on 1, source 0
CA_SET_PID error 22: Invalid argument
CA_SET_PID error 22: Invalid argument
CA_SET_PID error 22: Invalid argument
[mg0] service E index 0 pmt pid 6B (1), pids: video 0x0BFF, audio 0x0020 0x0C00
[mg0] ECM: CaID: 0x1702 -> CaPID: 0x1720 ProvID: 000000
[mg0] ECM: CaID: 0x1722 -> CaPID: 0x1C21 ProvID: 000000
[mg0] ECM: CaID: 0x1833 -> CaPID: 0x1820 ProvID: 000000
[mg0] ECM: CaID: 0x1834 -> CaPID: 0x1C20 ProvID: 000000
[mg0] ECM: CaID: 0x09C4 -> CaPID: 0x1B20 ProvID: 000000
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[mg0] network can't decode
[mg0] pid 0x1720 failed to decode.
[mg0] network can't decode
[mg0] pid 0x1C21 failed to decode.
[mg0] network can't decode
[mg0] pid 0x1820 failed to decode.
[mg0] network can't decode
[mg0] pid 0x1C20 failed to decode.
[mg0] network can't decode
[mg0] pid 0x1B20 failed to decode.
[mgcamd] emm started
Starting emm for newcamd shared card
*EMM: CaID: 0x1702 -> CaPID: 0x1000 ProvID: 000000
EMM: CaID: 0x1722 -> CaPID: 0x1502 ProvID: 000000
*EMM: CaID: 0x1833 -> CaPID: 0x1002 ProvID: 000000
*EMM: CaID: 0x1836 -> CaPID: 0x1002 ProvID: 000000
EMM: CaID: 0x09C4 -> CaPID: 0x1008 ProvID: 000000
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[newcamd] EMM-G -> 192.168.178.1:25000
EMM: RSA Nagra2 key not found for id 1d (pid 0x1002)
EMM: RSA Nagra2 key not found for id 1d (pid 0x1002)
[newcamd] EMM answer from 192.168.178.1:25000, 3:82
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[newcamd] EMM-G -> 192.168.178.1:25000
EMM: RSA Nagra2 key not found for id ce (pid 0x1002)
EMM: RSA Nagra2 key not found for id ce (pid 0x1002)
[newcamd] EMM answer from 192.168.178.1:25000, 3:82
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
EMM: RSA Nagra2 key not found for id 4d (pid 0x1002)
EMM: RSA Nagra2 key not found for id 4d (pid 0x1002)
[newcamd] EMM-G -> 192.168.178.1:25000
[newcamd] EMM answer from 192.168.178.1:25000, 3:82
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[newcamd] EMM-G -> 192.168.178.1:25000
[newcamd] EMM answer from 192.168.178.1:25000, 3:82
EMM: RSA Nagra2 key not found for id b5 (pid 0x1002)
EMM: RSA Nagra2 key not found for id b5 (pid 0x1002)
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[newcamd] EMM-S -> 192.168.178.1:25000
[newcamd] EMM answer from 192.168.178.1:25000, 3:82
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[newcamd] EMM-G -> 192.168.178.1:25000
[newcamd] EMM cached
EMM: RSA Nagra2 key not found for id ce (pid 0x1002)
EMM: RSA Nagra2 key not found for id ce (pid 0x1002)
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
EMM: RSA Nagra2 key not found for id 4d (pid 0x1002)
EMM: RSA Nagra2 key not found for id 4d (pid 0x1002)
[newcamd] EMM-G -> 192.168.178.1:25000
[newcamd] EMM cached
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[newcamd] EMM-G -> 192.168.178.1:25000
[newcamd] EMM cached
EMM: RSA Nagra2 key not found for id b5 (pid 0x1002)
EMM: RSA Nagra2 key not found for id b5 (pid 0x1002)
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
EMM: RSA Nagra2 key not found for id 92 (pid 0x1002)
EMM: RSA Nagra2 key not found for id 92 (pid 0x1002)
[newcamd] EMM-G -> 192.168.178.1:25000
[newcamd] EMM answer from 192.168.178.1:25000, 3:82
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
EMM: RSA Nagra2 key not found for id f9 (pid 0x1002)
EMM: RSA Nagra2 key not found for id f9 (pid 0x1002)
[newcamd] EMM-G -> 192.168.178.1:25000
[newcamd] EMM answer from 192.168.178.1:25000, 3:82
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[newcamd] EMM-S -> 192.168.178.1:25000
[newcamd] EMM answer from 192.168.178.1:25000, 3:82
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
EMM: RSA Nagra2 key not found for id 1d (pid 0x1002)
EMM: RSA Nagra2 key not found for id 1d (pid 0x1002)
[newcamd] EMM-G -> 192.168.178.1:25000
[newcamd] EMM cached
[mg0] sid 000E blocked on newcamd 192.168.178.1:25000.
[mgcamd] signal 15 received
[mgcamd] emm stopped
[mg0] stoping camd..



mg_cfg:

# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }

# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }

# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 02 }

# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0

# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 01 }

# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30

# network ecm timeout in seconds
K: { 05 }

# newcamd dead routes connect retry, sec
Q: { 600 }

# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 02 }

# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password

# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80

# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 04 } 172.16.1.1 28007 /var/swap/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }

# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }

# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 11 }

# map all 180x nagra caids to 1801
# default is 01
F: { 01 }



newcamd.list:

CWS = 192.168.178.1 25000 user1 user1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv



ich bin langsam wirklich am verzweifeln.
wenn newcs die S02-karte mit CAID 1702 erkennt, heißt dass definitiv, dass der smargo richtig eingestellt ist und dass der usb hub funktioniert?
Ich habe jetzt schon erfolglos einen 2. (allerdings auch passiven) usb hub probiert.