hey Leute,

ich habe eine Fritzbox 7141 mit einem Smargo Reader und S02-Karte.
Firmware-Version 40.04.70freetz-devel-3475M.
Dort läuft newcs 1.65.
Auf der Fritzbox funktioniert soweit alles. Die Karte wird von newcs mit CAID 1702 erkannt bei 6MHz.

Jetzt will ich die kathi 910 mit der fritzbox verbinden.
dort ist das AAF_First_SVN-V2_UFS910-Flash Image installiert.
ich habe dazu ein IPK camd3 3.902 installiert.
eigentlich müsste sich die camd3 ja direkt mit newcs verbinden können.


In camd3.config habe ich eingefügt:
SLOT=192.168.178.1:4:1:1:1:25000:user1:user1:01020 30405060708091011121314

In camd3.servers habe ich eingefügt:
cs357x://user1:user1@192.168.178.1:25000




Zwar verbindet sich die camd3 laut web-interface mit newcs, leider wirds auf der kathi aber nicht hell.
Stattdessen habe ich nur Bad ECM's bei newcs.



Hier ein Log der camd3:

20.02.2010 15:03:04 camd3: BOXTYPE: dm800
20.02.2010 15:03:04 camd3: LOG: 1
20.02.2010 15:03:04 camd3: UDP_PORT: 20248
20.02.2010 15:03:04 camd3: HTTP_PORT: 9080
20.02.2010 15:03:04 camd3: LOG_FILE: /var/swap/camd3.log
20.02.2010 15:03:04 camd3: DNS_CACHE: 60 sec
20.02.2010 15:03:04 camd3: DESCR_DELAY: 0 ms
20.02.2010 15:03:04 camd3: camd3.map not found
20.02.2010 15:03:04 camd3: camd3.ignore not found
20.02.2010 15:03:04 camd3: camd3.servers: HOST=192.168.178.1 PORT=25000
20.02.2010 15:03:04 camd3: UserDB(server): USER=user1 PASS=user1 SERVICES=all
20.02.2010 15:03:04 camd3: UserDB(add): USER=benutzer1 PASS=password2 FROM=any SERVICES=all
20.02.2010 15:03:04 camd3: /var/keys/pw_start.services not found
20.02.2010 15:03:04 camd3: UserDB(add): USER=benutzer110 PASS=password10 FROM=any SERVICES=all
20.02.2010 15:03:04 camd3: /var/keys/pw_start.services not found
20.02.2010 15:03:04 camd3: UserDB(update): USER=benutzer110 PASS=password10 FROM=any SERVICES=all
20.02.2010 15:03:04 camd3: KeyDB: started
20.02.2010 15:03:04 camd3: HTTP: started on port 9080
20.02.2010 15:03:06 camd3: slot 192.168.178.1:25000 -> init...
20.02.2010 15:03:06 camd3: slot 192.168.178.1:25000 monitor start...
20.02.2010 15:03:06 camd3: slot 192.168.178.1:25000 -> card in
20.02.2010 15:03:06 camd3: slot 192.168.178.1:25000 -> CAID 1702
20.02.2010 15:03:08 camd3: camd v3.902 - erfolgreich gestartet
20.02.2010 15:03:09 camd3: start ecm pid 1722 caid 1702 ident 000000
20.02.2010 15:03:09 camd3: start ecm pid 1c23 caid 1722 ident 000000
20.02.2010 15:03:09 camd3: start ecm pid 1822 caid 1833 ident 000000
20.02.2010 15:03:09 camd3: start ecm pid 1c22 caid 1834 ident 000000
20.02.2010 15:03:09 camd3: start ecm pid 1b22 caid 09c4 ident 000000
20.02.2010 15:03:09 camd3: CMD 02 -> 09C4:000000:000D:1B22 from 127.0.0.1 ( camd3 )
20.02.2010 15:03:09 camd3: start emm pid 1000 caid 1702 ident 000000
20.02.2010 15:03:09 camd3: start emm pid 1000 caid 1702 ident 000000
20.02.2010 15:03:09 camd3: start emm pid 1002 caid 1833 ident 000000
20.02.2010 15:03:09 camd3: CMD 02 -> 1702:000000:000D:1722 from 127.0.0.1 ( camd3 )
20.02.2010 15:03:09 camd3: CMD 02 -> 1722:000000:000D:1C23 from 127.0.0.1 ( camd3 )
20.02.2010 15:03:09 camd3: CMD 02 -> 1833:000094:000D:1822 from 127.0.0.1 ( camd3 )
20.02.2010 15:03:09 camd3: CMD 02 -> 1834:0000C6:000D:1C22 from 127.0.0.1 ( camd3 )
20.02.2010 15:03:10 camd3: CMD 02 -> 09C4:000000:000D:1B22 from 127.0.0.1 ( camd3 )
20.02.2010 15:03:11 camd3: CMD 02 -> 1702:000000:000D:1722 from 127.0.0.1 ( camd3 )
20.02.2010 15:03:11 camd3: CMD 02 -> 1722:000000:000D:1C23 from 127.0.0.1 ( camd3 )
20.02.2010 15:03:11 camd3: CMD 02 -> 1833:000094:000D:1822 from 127.0.0.1 ( camd3 )
20.02.2010 15:03:11 camd3: CMD 02 -> 1834:0000C6:000D:1C22 from 127.0.0.1 ( camd3 )
20.02.2010 15:03:17 camd3: CMD 02 -> 09C4:000000:000D:1B22 from 127.0.0.1 ( camd3 )
20.02.2010 15:03:18 camd3: CMD 06 -> 1702:000000:0000:1000 from 127.0.0.1 ( camd3 )
20.02.2010 15:03:18 camd3: CMD 02 -> 1702:000000:000D:1722 from 127.0.0.1 ( camd3 )




und hier meine newcs.xml auf der fritzbox:

<newCSconfig>
<readers name="Phoenix">
<device>
<name>Sky</name>
<type>phoenix</type>
<mhz>600</mhz>
<node>/dev/ttyUSB0</node>
<parity>even</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<crypto-special>No</crypto-special>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>25000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<priority>round</priority>
</device>
</readers>
<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
<httpd>
<server>
<port>15478</port>
<enabled>yes</enabled>
</server>
<user>
<name>newcs</name>
<password>newcs</password>
<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>
<password>newcs</password>
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<tcp_port>1001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>user1</name>
<password>user1</password>
<hostname></hostname>
<port></port>
<au>yes</au>
<spider>no</spider>
<sidoverride>no</sidoverride>
<rate>0</rate>
</user>
</newcamdserver>
</newCSconfig>




Ich wäre für jede Hilfe dankbar; versuche nun schon fast 3 Tage das ans laufen zu bekommen!