hey, danke für die Antwort.
Ich habe jetzt mal die mgcamd 1.35 probiert.
Leider auch ohne Erfolg.
Die Verbindung zur cccam 2.1.1 wird hergestellt, und es werden auch ECM Anfragen angezeigt "64 (0)".
kurz danach steht dann aber beim cccam server unter "entitlements":
card reader /dev/ttyUSB0
no or unknown card inserted
cccam_cfg:
N: 192.168.178.1 25000 test test 01 02 03 04 05 06 07 08 09 10 11 12 13 14
F: user1 user1
SERVER LISTEN PORT : 12000
SERIAL READER : /dev/ttyUSB0
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 6000000
WEBINFO USERNAME : cccam
WEBINFO PASSWORD : cccam
MINIMUM DOWNHOPS: 1
SOFTKEY FILE : /var/media/ftp/uStor01/cs/cccam/SoftCam.Key
AUTOROLL FILE : /var/media/ftp/uStor01/cs/cccam/AutoRoll.Key
STATIC CW FILE : /var/media/ftp/uStor01/cs/cccam/constant.cw
CAID PRIO FILE : /var/media/ftp/uStor01/cs/cccam/CCcam.prio
PROVIDERINFO FILE : /var/media/ftp/uStor01/cs/cccam/CCcam.providers
CHANNELINFO FILE : /var/media/ftp/uStor01/cs/cccam/CCcam.channelinfo
mg_cfg:
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }
# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }
# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 02 }
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 32 }
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30
# network ecm timeout in seconds
K: { 20 }
# newcamd dead routes connect retry, sec
Q: { 600 }
# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 02 }
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password
# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80
# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 04 } 172.16.1.1 28007 /var/swap/mgcamd.log
# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }
# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }
# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 11 }
# map all 180x nagra caids to 1801
# default is 01
F: { 01 }
mgcamd Log:
tuxbox mgcamd v1.35 by mixvt (compiled Jan 20 2010 22:15:45)
[mg] Net:32:7:2:20s Show ecm:1, emm:1 Up:1 Au:2 Dir:0 Osd:no:80:0 Cache:7 Log:4:172.16.1.1:28007 Reread:0
[mg] Ecm cache time: 15
Box type: dbox2
Conax.Key error 2: No such file or directory
Keys readed
AutoRoll.Key error 2: No such file or directory
Conax.Key error 2: No such file or directory
CCcamd route: host 192.168.178.1 port 12000 user1:user1
[mgcam] emm thread started
[cccamd] My nodeID a249b2e42f2ae0b7
[cccamd] =============== Connecting to 192.168.178.1:12000... ===============
[cccamd] Connected to 192.168.178.1:12000 as user1 (59ms)
[cccamd] Login to 192.168.178.1:12000 as user1 accepted (81ms)
[cccamd] Server intro from 192.168.178.1:12000
[cccamd] Server NodeID 9127dc57a8997291 version 2.1.1
got 78 cmd 9F
[mg0] namespace C00000 t-id 4 on-id 85
[mg0] descramble on 1, source 0
CA_SET_PID error 22: Invalid argument
CA_SET_PID error 22: Invalid argument
CA_SET_PID error 22: Invalid argument
[mg0] service E index 0 pmt pid 6B (1), pids: video 0x0BFF, audio 0x0020 0x0C00
[mg0] ECM: CaID: 0x1702 -> CaPID: 0x1720 ProvID: 000000
[mg0] ECM: CaID: 0x1722 -> CaPID: 0x1C21 ProvID: 000000
[mg0] ECM: CaID: 0x1702 -> CaPID: 0x1820 ProvID: 000000
[mg0] ECM: CaID: 0x1834 -> CaPID: 0x1C20 ProvID: 000000
[mg0] ECM: CaID: 0x09C4 -> CaPID: 0x1B20 ProvID: 000000
[mg0] -> ECM to cccamd 192.168.178.1:12000 (00000065)
[mg0] cccamd route 192.168.178.1:12000 cant decode (10ms)
[mg0] network can't decode
[mg0] pid 0x1720 failed to decode.
[mg0] network can't decode
[mg0] pid 0x1C21 failed to decode.
[mg0] network can't decode
[mg0] pid 0x1C20 failed to decode.
[mg0] network can't decode
[mg0] pid 0x1B20 failed to decode.
[mgcamd] emm started
EMM: CaID: 0x1702 -> CaPID: 0x1000 ProvID: 000000
EMM: CaID: 0x1722 -> CaPID: 0x1502 ProvID: 000000
*EMM: CaID: 0x1833 -> CaPID: 0x1002 ProvID: 000000
*EMM: CaID: 0x1836 -> CaPID: 0x1002 ProvID: 000000
EMM: CaID: 0x09C4 -> CaPID: 0x1008 ProvID: 000000
[mg0] -> ECM to cccamd 192.168.178.1:12000 (00000065)
[mg0] cccamd route 192.168.178.1:12000 cant decode (4ms)
[mg0] -> ECM to cccamd 192.168.178.1:12000 (00000065)
[mg0] cccamd route 192.168.178.1:12000 cant decode (12ms)
[mg0] -> ECM to cccamd 192.168.178.1:12000 (00000065)
[mg0] cccamd route 192.168.178.1:12000 cant decode (5ms)
[mg0] -> ECM to cccamd 192.168.178.1:12000 (00000065)
[mg0] cccamd route 192.168.178.1:12000 cant decode (12ms)
[mg0] -> ECM to cccamd 192.168.178.1:12000 (00000065)
[mg0] cccamd route 192.168.178.1:12000 cant decode (4ms)
[mg0] -> ECM to cccamd 192.168.178.1:12000 (00000065)
[mg0] cccamd route 192.168.178.1:12000 cant decode (4ms)
[mg0] -> ECM to cccamd 192.168.178.1:12000 (00000065)
[mg0] cccamd route 192.168.178.1:12000 cant decode (12ms)
Wäre super, wenn ihr mir weiter helfen würdet!