Hi seven-eleven,

jetzt habe ich mal bei mir auf der Kathi geschaut was als Trace so augegeben wird und auch bei mir erscheint als Box Type DBox2.

AAF-ufs910:~# /var/emu/mgcamd
tuxbox mgcamd v1.35 by mixvt (compiled Jan 20 2010 2245)
[mg] Net75s Show ecm:1, emm:0 Up:1 Au:1 Dir:0 Osd:neutrino:8080:3 Cache:7 Log127.0.0.1:28007 Reread:0
[mg] Ecm cache time: 15
Box type: dbox2
Conax.Key error 2: No such file or directory
SoftCam.Key error 2: No such file or directory
AutoRoll.Key error 2: No such file or directory
Conax.Key error 2: No such file or directory
[config] newcamd route = user1:192.168.1.11:10003 server cardserv
newcamd keep alive: 300, incoming port: 21000
AAF-ufs910:~# [mgcam] emm thread started
[newcamd] Connecting to 192.168.1.11:10003...
[newcamd] Login to 192.168.1.11:10003 as user1 accepted (120ms)
[newcamd] Card data from 192.168.1.11:10003 (123ms):
EMM enabled: UA yes SA yes GA yes, Card serial: 1A74EFE1
Userid 1 caid 1702 providers 4
Idents: 000000 000001 000002 000003
ids: FFFFFF FFFFFF FFFFFF FFFFFF

got 49 cmd 9F
[mg0] namespace C00000 t-id 436 on-id 1
[mg0] descramble on 1, source 0
CA_SET_PID error 22: Invalid argument
CA_SET_PID error 22: Invalid argument
CA_SET_PID error 22: Invalid argument
CA_SET_PID error 22: Invalid argument
[mg0] service 7008 index 0 pmt pid 1A4 (1), pids: video 0x1005, audio 0x1006 0x1008 0x1009
[mg0] No supported encryption system found
[mg0] stopped
[mgcamd] emm started
EMM: CaID: 0x0D00 -> CaPID: 0x0190 ProvID: 000000
EMM: CaID: 0x0B00 -> CaPID: 0x0192 ProvID: 000000
EMM: CaID: 0x0100 -> CaPID: 0x00C1 ProvID: 000000
*EMM: CaID: 0x0100 -> CaPID: 0x00C8 ProvID: 000012
EMM: CaID: 0x0100 -> CaPID: 0x00B7 ProvID: 00006A
EMM: CaID: 0x0100 -> CaPID: 0x02C6 ProvID: 003341
EMM: CaID: 0x0100 -> CaPID: 0x02BF ProvID: 003317
*EMM: CaID: 0x1815 -> CaPID: 0x0193 ProvID: 000000
Starting emm for newcamd shared card
*EMM: CaID: 0x1702 -> CaPID: 0x1521 ProvID: 000000
EMM: CaID: 0x09C4 -> CaPID: 0x1528 ProvID: 000000
*EMM: CaID: 0x1811 -> CaPID: 0x02C6 ProvID: 000000
*EMM: CaID: 0x1811 -> CaPID: 0x02BF ProvID: 000000
*EMM: CaID: 0x1811 -> CaPID: 0x00C1 ProvID: 000000
So, bis hierhin was ein FTA Kanal aktiv und jetzt schalte ich einen Sky Kanal ein:
[mg0] stoping camd..
[mgcamd] emm stopped
[mg0] stopped
got 8 cmd 9F
got 94 cmd 9F
[mg0] namespace C00000 t-id 2 on-id 85
[mg0] descramble on 1, source 0
CA_SET_PID error 22: Invalid argument
CA_SET_PID error 22: Invalid argument
CA_SET_PID error 22: Invalid argument
CA_SET_PID error 22: Invalid argument
CA_SET_PID error 22: Invalid argument
[mg0] service A index 0 pmt pid 65 (3), pids: video 0x01FF, audio 0x0020 0x0200 0x0201 0x0203
[mg0] ECM: CaID: 0x1702 -> CaPID: 0x1742 ProvID: 000000
[mg0] ECM: CaID: 0x1722 -> CaPID: 0x1C43 ProvID: 000000
[mg0] ECM: CaID: 0x1833 -> CaPID: 0x1842 ProvID: 000000
[mg0] ECM: CaID: 0x1834 -> CaPID: 0x1C42 ProvID: 000000
[mg0] ECM: CaID: 0x1836 -> CaPID: 0x1843 ProvID: 000000
[mg0] ECM: CaID: 0x09C4 -> CaPID: 0x1B42 ProvID: 000000
[mg0] -> ECM to newcamd 192.168.1.11:10003
[mg0] <- CW from newcamd 192.168.1.11:10003 (695ms)
[mg0] 695 msec -- Tue Feb 23 18:41:24 2010
===== Betacrypt ECM on CaID 0x1702, pid 0x1742 ======
prov: 000000
cw0:0 DA 13 F2 DF 0B 0D E4 FC
cw1:0 2B 15 18 58 AA 53 A3 A0
[mg0] irdeto using chid 0001 version C7
[mgcamd] emm started
Starting emm for newcamd shared card
*EMM: CaID: 0x1702 -> CaPID: 0x1000 ProvID: 000000
EMM: CaID: 0x1722 -> CaPID: 0x1502 ProvID: 000000
*EMM: CaID: 0x1833 -> CaPID: 0x1002 ProvID: 000000
*EMM: CaID: 0x1836 -> CaPID: 0x1002 ProvID: 000000
EMM: CaID: 0x09C4 -> CaPID: 0x1008 ProvID: 000000
[mg0] -> ECM to newcamd 192.168.1.11:10003
[mg0] <- CW from newcamd 192.168.1.11:10003 (663ms)
[mg0] 663 msec -- Tue Feb 23 18:41:30 2010
===== Betacrypt ECM on CaID 0x1702, pid 0x1742 ======
prov: 000000
cw0:0 DA 13 F2 DF 0B 0D E4 FC
cw1:0 A4 30 86 5A A6 0B D4 85
[mg0] irdeto using chid 0001 version C7
[mg0] -> ECM to newcamd 192.168.1.11:10003
[mg0] <- CW from newcamd 192.168.1.11:10003 (689ms)
[mg0] 689 msec -- Tue Feb 23 18:41:37 2010
Ich hatte Anfangs das AAF 2.0e Image im Flash auf der Kathi, dann bin ich auf BA umgestiegen und habe vom Stick gebootet. Dann habe ich der Reihe nach die Enigma Images getestet und fand die eigentlich besser als das MOD Image. Unterschiede bzgl. des EMU konnte ich bei keiner Version feststellen, hat sowohl bei Flash, als auch bei BA funktioniert. Auf einer meiner weiteren Kathi Boxen habe ich das UbootMini installiert und starte das aktuelle Olympia Image von der angeschlossenen Festplatte. (auch mit EMU und ohne Probleme)

Jetzt kommt die mg_cfg von mir (bitte stell sicher das sie bei dir auch unter dem Verzeichnis /var/keys liegt)
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 00 }

# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }

# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 01 }

# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0

# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 01 }

# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30

# network ecm timeout in seconds
K: { 05 }

# newcamd dead routes connect retry, sec
Q: { 600 }

# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 02 }

# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 01 } root newcs

# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 8080

# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 02 } 127.0.0.1 28007 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }

# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as r
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }

# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 11 }

# map all 180x nagra caids to 1801
# default is 01
F: { 00 }
Ich habe auch eine S02 Karte, daran kann es also auch nicht liegen.
Einziger Unterschied ist der Server, ich habe eine DBox2 mit Multicam NG2.
Das wollte ich aber auch ändern, weil mir die Lösung zuviel Strom zieht.

Heute ist mein Smargo gekommen, aber ich habe keine Fritzbox. Eigentlich wollte ich einen kleinen sparsamen Linux Server aufsetzen, weil ich dann auch noch mein NAS einsparen kann. Leider habe ich das auch noch nie gemacht und bei meinen Fragen zu dem Thema habe ich überhaupt keine Rückantwort. Schade eigentlich, aber davon lasse ich mich nicht abhalten. Bangemachen gilt nicht! ;-)

Besten Gruß,
Kuppi...