muss ma was fragen mgc1.35-->ccamserver
hd geht
hd+ nicht
mit inc ok!
muss man was spez mappen in replace.list der mgc oder sonstwas noch changen?
muss ma was fragen mgc1.35-->ccamserver
hd geht
hd+ nicht
mit inc ok!
muss man was spez mappen in replace.list der mgc oder sonstwas noch changen?
mach so :
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 00 }
# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }
# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 01 }
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps au pid
U: { 01 } 0x12c0
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
G: { 32 }
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30
# network ecm timeout in seconds
K: { 02 }
# newcamd dead routes connect retry, sec
Q: { 600 }
# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 02 }
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 01 } root newcs
# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 8080
# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 02 } 127.0.0.1 28007 /tmp/mgcamd.log
# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }
# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }
# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 12 Fortis
B: { 11 }
F: { 00 }
sollte funzen (tuts zumindest bei mir)
ich brauch auch mal eure hilfe.
habe eine kathi 910 mit aaf 2.0e im flash mgcam 1.35
fritz mit freetz 7141_04.70freetz-devel-3475M ccam 2.10 als server mit einer v13 karte voll abo
mg_cfg der kathi
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }
# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }
# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 02 }
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /data/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 32 }
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30
# network ecm timeout in seconds
K: { 05 }
# newcamd dead routes connect retry, sec
Q: { 600 }
# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 02 }
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } name passw
# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80
# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 00 } 172.16.1.1 28007 /tmp/mgcamd.log
# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }
# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }
# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 08 }
# map all 180x nagra caids to 1801
# default is 01
F: { 00 }
cccam.cfg
F: test test
C: 192.168.178.1 18000 test test
SERIAL READER: /dev/ttyUSB0 Smartreader+
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 3570000
SERVER LISTEN PORT : 18000
SOFTKEY FILE : /var/media/ftp/uStor01/cs/cccam/SoftCam.Key
AUTOROLL FILE : /var/media/ftp/uStor01/cs/cccam/AutoRoll.Key
STATIC CW FILE : /var/media/ftp/uStor01/cs/cccam/constant.cw
CAID PRIO FILE : /var/media/ftp/uStor01/cs/cccam/CCcam.prio
PROVIDERINFO FILE : /var/media/ftp/uStor01/cs/cccam/CCcam.providers
CHANNELINFO FILE : /var/media/ftp/uStor01/cs/cccam/CCcam.channelinfo
WEBINFO USERNAME : cccam
WEBINFO PASSWORD : cccam
WEBINFO LISTEN PORT : 16001
karte wird erkannt
Available providers:
+----+----------+--------------+-----+
|Caid| Provider | Provider Name| System|
+----+----------+--------------+-----+
| 9c4| |Premiere (19E)|nds |
+----+----------+--------------+-----+
Connected clients: 1
+---------+---------------+------------+------------+-----+-----+--------+----------------------+
| Username| Host | Connected | Idle time | ECM | EMM | Version| Last used share |
+---------+---------------+------------+------------+-----+-----+--------+----------------------+
|test |192.168.178.1 |00d 00:14:21|00d 00:14:21|0 (0)|0 (0)|2.1.0 | |
wenn ich bei home gehe steht dies hier
Current time 00:39:18
NodeID: xxxxxxxxxxxxxxxx
Uptime: 00d 00:17:57
Connected clients: 1
Active clients: 1
Total handled client ecm's: 0
Total handled client emm's: 0
Peak load (max queued requests per workerthread):
Connected clients verschwindet immer nach ca 20 sec auf 0
und es wird auch nichts hell :-(
wo liegt das übel??
bitte helft mir, am we kommt doch f1
im voraus vielen dank
mfg
blauhauwy
Sendet die Kathrein 910 mit einer mgcamd 1.35 keine emms an meine Cccam- Server-Fritzbox?
Im WebInterface des Cccam (Server) steht:
Current time 02:17:22
NodeID: xxxxxxxxxxxxx
Uptime: 00d 01:51:35
Connected clients: 1
Active clients: 1
Total handled client ecm's: 677
Total handled client emm's: 0
Peak load (max queued requests per workerthread): 2
Kann es sein das wenn nur meine Kathrein an dem Server hängt ich jedesmal wenn Fußball kommt die S02-Karte erst im UFS910 updaten muss damit er die Daten für die Optionskanäle empfängt?
Hatte nämlich genau das ausprobiert und danach wurde es auch über den Server wieder hell.
Welche Einstellungen muss ich vornehmen damit die Kathrein 910 mit mgcamd 1.35 emms an meine Cccam-Server-Fritzbox sendet?
Wenn das überhaupt nicht möglich ist welche Alternativen gibt es?
Anderes Emu in der Kathrein oder der Fritzbox????
Geändert von zotte007 (13.03.10 um 00:37 Uhr)
Welche serverversion cccam hast du laufen? also mit Kathi+ mgcam 1.35 und server cccam 2.0.11 werden keine emm´s gesendet. dies geht meines wissens nur mit server cccam+newcs und kathi connect auf newcs mit mgcam dort aber sehr gut ohne probleme...
es liegt wohl an der server-cccam da meine dbox+cccam client auch keine emm´s rüber gibt.....
aber eigendlich brauchst du nicht zwingend die emm´s einfach 1-2 mal im monat in der dbox (oder kathi) mit camd2 die card 1-2h laufen lassen und alles ist wieder da...
Ich habe diie Cccam 2.0.11 im Server laufen.
Liegt das denn nicht an der mgcamd 1.35? Es gab doch ein Fix mit der 1.35a wo irgendwas mit emm gefixt wurde.
Wie häufig muss ich den die Karte in der Kathrein updaten? Ich dachte jedesmal wenn ich Fussball gucke und die Optionskanäle sich aktualisieren?
Oder hält das mehrere Wochen?
Geändert von zotte007 (13.03.10 um 14:41 Uhr)
jo zu anderen cams gehts es seit 1.35a wieder aber nicht zu cccam...
bei mir hält das update ca.5-6 wochen merkste ja wenn dann dieser oder jener sender weg ist...dann sollte die geuppt werden..dauert ja nur 30 min und alles geht wieder..
emm´s von mgcam zu cccam gingen noch nie!!!