ich habe es nochmal auf eine andere Methode ausgeführt.
HyperT.
Mit der UFR Datei senden und Image auf den Stick.
so sieht der Log aus.
Netzwerk mit CrossK. klappt wieder.
U-Boot 1.1.2 (STLINUX_2_0p1) (Feb 23 2008 - 17:07:31)
DRAM: 32 MB
write time out = 1, clock = 40
write time out = 1, clock = 40
Flash: 16 MB
In: serial
Out: serial
Err: serial
pll0 freq 531
pll1 freq 399
Net: VFD_Driver Init
VFD_Controller Type : NEW Kathrein VFD
board_version = 0
Button_value = 7
Hit any key to stop autoboot: 0
## Booting image
Image Name: Linux 2.6d/S200
s_en
Image Type: SH-4 Linux Kernel Image (gzip compressed)
s_env_mac[1] = 0ugin lirc_stm ow
Data Size: 1714625 Bytes = 1.6 MB
s_env_mac[3] = 5
s_env_
Load Address: 84401000
Entry Point: 84402000s a asc]
Verifying Checksum ... OK
s_env_mac[7] =
Uncompressing Kernel Image ... OK
s_env_mac[8] = :
Starting kernel console=ttyAS0,115200 root=/dev/mtdblock3 mem=41m bigphysarea=26mac[10] = f is a asc
s_env_mac[11] = :
00 coprocessor_mem=2m@0x04000000,2m@0x04200000 - 0x00000000 - 0 ...env_mac[13] = 2AM disks of 4096K
Linux version 2.6.17.14_stm22_0037 (kdhong@linux.localdomain) (gcc version 4.1.1 Version = 1.21oard=stb7100ref_27
S
(STMicroelectronics/Linux Base 4.1.1-23)
st-coprocessor: Failed to reserve memory at 0x04200000
Board: STb71
numb
PID hash table entries: 256 (order: 8, 1024 bytes)
SMSC: irq = 2
Using tmu for system timer
SMSC: int_dea
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Load m
SMSC:
Inode-cache hash table entries: 40
SMSC: --> Platform_InitializeMB
Mount-cache hash table entries: 512
SMSC: Lan Base at 0xA2000000ice
CPU: STb710x
NET: Registered protocol family 16XSHM-PortClosed: task created
SCSI subsystem initialized
usbcore: registered new driver usbfs
nwhw_config: devic
usbcore: registered
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)0000000
TCP: Hash tables configured (established 2048 bind 1024)
Onboard_Flash: Found 1 x16 de
TCP reno registeredit bank
bigphysarea: Allocated 2600 pages at 0x847b9000.
mice: PS/2 mouse device common for all
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.16 devices at 0x800000 in 16-bit bankes driver
Initializing Cryptographic API
io scheduler noop registered04e0000-0x00ae0000 : "APP_Mo
io scheduler anticipatory registered (default)
lirc_dev: lirc_register_plugin: plugin lirc_stm owner 00000000
ab
: Success
LMI_VID
mount: Mounting /
STM LIRC plugin has IRQ 125_start_host_controlID SCR =
Lirc STM: Using IRB mode
S
STMicroelectronics LIRC driver configured
LM
[FAILED]
STPIO layer initialisedci.2: ST EHCI Host Cont
VFD_Controller Type : NEW Kathrein VFDnot create /e
STMicroelectronics ASC driver initialized
ST40-ehci ST40-
ttyAS0 at MMIO 0xb8032000 (irq = 121)
s_env_mac[3] = 5alizing USB Mass
s_env_mac[4] = 0.Mgr::CheckMode
s_env_mac[5] = :
s_env_mac[6] = f
SC
usbcore:
s_env_mac[7] = driver usb-storag
s_env_mac[8] = :
s_env_mac[9] = f
s_env_mac[10] = fupport registered
s_env_mac[11] = :
s_env_mac[12] = 1
usbco
s_env_mac[13] = 2 driver libusualv
s_env_mac[14] = :
s_env_mac[15] = 3
peg
s_env_mac[16] = 45/11/13), Pegasus
get ether addr = 0, 50, fd, ff, 12, 34
Board: STb71
mac hi address = 3412, lowaddress = fffd5000usbcore: registered new driver zaurus
SMSC: --> init_module()
Channels : Not defined
SMSC: debug_mode = 0x00000007 : not usedocol family 2ard init
SMSC: tx_fif_sz = 0x00050000
--------------------------
SMSC: afc_cfg = 0xFFFFFFFF, driver will decide entries: 512 (order: -1, 2048 bytes)
SMSC: tasklets = 0, Tasklets disabled
SMSC: phy_addr = 0xFFFFFFFF, Use internal phyd registered7100 version 3.xclock =
SMSC: max_throughput = 0xFFFFFFFF, Use platform default1P established hash table entri
io
ab
SMSC: burst_period = 0xFFFFFFFF, Use platform defaulton (null) failed: Success
SMSC: max_work_load = 0xFFFFFFFF, Use platform defaultubm a
/etc/rcS.d/S200mountfs: /etc/rcS.d/S2
SMSC: -->Smsc911x_init(dev=0x846E45CC) Reared
SMSC: --> Platform_Initialize
s
NET
SMSC: Lan Base at 0xA2000000
io sch
d-only file
SMSC: <-- Platform_Initializeount: Can't find / in /etc/fs
SMSC: dwLanBase=0xA2000000rcable en
SMSC: LAN9115 identified, dwIdRev==0x01150002
: Success (order:
mount: Mou
SMSC: FPGA_REV == 0x00000000ss
SMSC: <--Smsc911x_init(), result=0
ata1: SATA link down (SStatus 0)=stb7100ref_27
scsi0 : sata_stm driver initiali
Generic ST boards onboard flash device: 0x01000000 (16.0Mb) at 0x00000000
PARAM : bootdelay=1
Onboard_Flash: Found 1 x16 devices at 0x0 in 16-bit bank
PARAM : bootargs=co
Onboard_Flash: Found 1 x16 devices at 0x800000 in 16-bit bank3] = s_env_mac[4] = ÿ
Amd/Fujitsu Extended Query Table at 0x0040
600 coprocessor_mem=2m@0
Onboard_Flash: CFI does not contain boot bank location. Assuming top.
s_env_mac[5]
s_env_mac[12] = 96K
LMI_SYS SDRA0 = 08001900
LMI_SYS SD
0x00020000-0x00040000 : "BootConfiguration 0xA002.0000-0xA003.FFFF"= 00000249
LMI_SYS CIC = 00000249
ST40_start_host_control6455
ST40_start_host_control proceeding
LMI_VID SDRA0 = 1400
ST40-ehci ST40-ehci.2: ST EHCI Host Controller001900
LMI_VID CIC = 0
ST40-ehci ST40-ehci.2: new USB bus registered, assigned bus number 1
LMI_VID SDMR1 = 00000000
VFD_Drive
ST40-ehci ST40-ehci.2: irq 169, io mem 0xb91ffe00
VFD PIO Already Opened
ST40-ehci ST40-ehci.2: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004er Type : NEW Kathrein VFD
CMDLINE = console=ttyA
usbcore: registered new driver usb-storageysarea=2600 cop
USB Mass Storage support registered.
rocessor_mem=2m@0x0
usbcore: registered new driver libusual
cannot fine test
pegasus: v0.6.13 (2005/11/13), Pegasus/Pegasus II USB Ethernet driver
Board: STb7100-mboard
usb 1-1: new high speed USB device using ST4p1) (Feb
#
usbcore: registered new driver zaurus
Image Na
mice: PS/2 mouse device common for all mice Image Type: SH-4 Linux Kernel Image (gzi
i2c /dev entries driver
stssc layer initialized
Data Size: 17146
STMicroelectronics - Coprocessors st231 Init
Load Address: 84401000
st231-0 Coprocessor ------------------------------------
Verifying Checksu
Linux version 2.6.17.14_stm22_0037 (kdhong@linux.loca
st231-1 Coprocessor -------------------------------------------
(STMicroelectronic
flags 0001 RAM start at 0xa4200000 size 0x00200000
cop. addr 0x04200000tronics STb7100 Reference board initia
Channels : Not defined
IRQ : not usedsion 3.x
---------------------------------------------------------------sole=ttyAS0,115200 root=/dev/mtdblock3 mem=4
TCP bic registered
/etc/init.d/rcS running...
Remounting root file system in read-write mode...mount: Can't find / in /etc/fst
S
Using tmu for system timer
ab
: Success
Dent
mount: Mounting / on (null) failed: Success 32768 bytes)40-ehci.2: USB 0.0 started, EH
[FAILED]driver 1
/etc/rcS.d/S200mountfs: /etc/rcS.d/S200mountfs: 91: cannot create /etc/mtab: Rea
Inode-cache hash table e
d-only file system: 2, 16384 bytes)
mount: Can't find / in /etc/fstab
: Success
BusyBox v1.1.0 (2006.03.02-09:48+0000) Built-in shell (ash)2 n_sets
D-cache : n_ways=2 n_sets
Enter 'help' for a list of built-in commands.
usb usb1: configuration #
config/start.sh does not exist.... running /app/start.shias_mask=0x00003000 n_aliases=4
PARAM : boot_param_version=20
hub 1-0:1.0: USB h
PARAM : board=stb7100ref_27
usb 1-1:
Moun
PARAM : bootcmd=bootm a0040000
PARAM : bootdelay=1 port detected
PARAM : ethaddr=00:50:fd:ff:12:340x
u
NET: Registere
PARAM : bootargs=console=ttyAS0,115200 root=
Initializing USB
h
UFS-910 found
mknod: /dev/vfd: File existstries: 512 (order: -1, 2048
vfd_driver_new: module license 'Marusys' taints kernel.
usbcore: registered new d
tmp_pin = 84753548ished hash table e
VFD_Driver Initder: 1, 8192 by
VFD_Controller Type : NEW Kathrein VFD
UFS910 Button Device Driver(by Marusys Co.)dr 0x04200000Remo
SysConf device InitC plugin has IRQ 12
LMI_SYS VCR0 = 00d40000
Lirc
LMI_SYS VCR1 = 0f041000
ST
LMI_SYS MIM0 = 057c025fiver configured/fst
LMI_SYS MIM1 = 00000005
STPIO
LMI_SYS SCR = 00000000
LMI_VID VCR0 = 00d40000
LMI_VID VCR1 = 17101000root
LMI_VID STR = 35b06455
LMI_VID COC = 00000000
LMI_VID SDRA0 = 14001900
LMI_VID SDRA1 = 14001900
LMI_VID CIC = 00000249
LMI_VID SDMR0 = 00000000
LMI_VID SDMR1 = 00000000
VFD_Driver Init
VFD PIO Already Opened
VFD PIO Already Opened
VFD PIO Already Opened
VFD_Controller Type : NEW Kathrein VFD
TestModMgr::CheckTestMode CmdLine = console=ttyAS0,115200 root=/dev/mtdblock3 me
m=41m bigphysarea=2600 coprocessor_mem=2m@0x04000000,2m@0x04200000
CMDLINE = console=ttyAS0,115200 root=/dev/mtdblock3 mem=41m bigphysarea=2600 cop
rocessor_mem=2m@0x04000000,2m@0x04200000
CMDLINE = console=ttyAS0,115200 root=/dev/mtdblock3 mem=41m bigphysarea=2600 cop
rocessor_mem=2m@0x04000000,2m@0x04200000
cannot fine test mode
TestModeMgr::CheckMode : TestMode Disabled
