na egal. ich bekomms ja nicht mal so zum laufen...
das Server log ist ok denk ich.
MD-Image - Philips D-BOX2 - Kernel 2.4.37.7-dbox2 (02:00:21)...
dbox login: root
BusyBox v1.14.4 (2009-12-06 11:20:59 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.
/var # oscam
-------------------------------------------------------------------------------
>> OSCam << cardserver started at Mon May 10 16:28:41 2010
-------------------------------------------------------------------------------
2010/05/10 16:28:41 158 s version=0.99.4svn, build #2041, system=powerpc-db
ox2-linux, nice=-1
2010/05/10 16:28:41 158 s max. clients=29, client max. idle=120 sec
2010/05/10 16:28:41 158 s max. logsize=unlimited
2010/05/10 16:28:41 158 s client timeout=5000 ms, fallback timeout=2500 ms,
cache delay=120 ms
2010/05/10 16:28:41 158 s shared memory initialized (size=554600, fd=3)
2010/05/10 16:28:41 158 s auth size=4752
2010/05/10 16:28:41 158 s services reloaded: 0 services freed, 11 services
loaded
2010/05/10 16:28:41 158 s userdb reloaded: 0 accounts freed, 1 accounts loa
ded, 0 expired, 0 disabled
2010/05/10 16:28:41 158 s signal handling initialized (type=sysv)
2010/05/10 16:28:41 158 s 772 service-id's loaded
2010/05/10 16:28:41 158 s monitor: disabled
2010/05/10 16:28:41 158 s camd 3.3x: disabled
2010/05/10 16:28:41 158 s camd 3.5x: initialized (fd=7, port=16003)
2010/05/10 16:28:41 158 s cs378x: disabled
2010/05/10 16:28:41 158 s newcamd: initialized (fd=8, port=30100, crypted)
2010/05/10 16:28:41 158 s CAID: 1830
2010/05/10 16:28:41 158 s provid #0: 003411
2010/05/10 16:28:41 158 s provid #1: 008011
2010/05/10 16:28:41 158 s cccam: disabled
2010/05/10 16:28:41 158 s radegast: disabled
2010/05/10 16:28:42 158 s client resolver thread started
2010/05/10 16:28:42 158 s logger started (pid=161)
2010/05/10 16:28:42 158 s resolver thread started
2010/05/10 16:28:42 158 s http started (pid=163)
2010/05/10 16:28:42 158 s reader started (pid=164, device=/dev/tts/1, detec
t=cd, mhz=368, cardmhz=368)
2010/05/10 16:28:42 158 s waiting for local card init
2010/05/10 16:28:42 163 h HTTP Server listening on port 0
2010/05/10 16:28:44 164 r02 card detected
2010/05/10 16:28:49 164 r02 ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53
50 31 34 32 20 52 65 76 47 43 34 63
2010/05/10 16:28:50 164 r02 Maximum frequency for this card is formally 5 Mhz
, clocking it to 3.68 Mhz
2010/05/10 16:28:51 164 r02 detect native NAGRA card T1 protocol
2010/05/10 16:28:52 164 r02 -----------------------------------------
2010/05/10 16:28:52 164 r02 |id |tier |valid from |valid to |
2010/05/10 16:28:52 164 r02 +----+--------+------------+------------+
2010/05/10 16:28:52 164 r02 |8011|0064 |2010/04/01 |2011/04/02 |
2010/05/10 16:28:52 164 r02 |8011|0065 |1992/01/01 |1993/01/01 |
2010/05/10 16:28:52 164 r02 -----------------------------------------
2010/05/10 16:28:54 164 r02 ROM: D N A S P 1 4 2
2010/05/10 16:28:54 164 r02 REV: R e v G C 4
2010/05/10 16:28:54 164 r02 SER: ******
2010/05/10 16:28:54 164 r02 CAID: 1830
2010/05/10 16:28:54 164 r02 Prv.ID: 00 00 34 11 (sysid)
2010/05/10 16:28:54 164 r02 Prv.ID: 00 00 00 00
2010/05/10 16:28:54 164 r02 Prv.ID: 00 00 80 11
2010/05/10 16:28:54 164 r02 [nagra-reader] ready for requests
2010/05/10 16:28:54 158 s init for all local cards done
2010/05/10 16:28:54 158 s anti cascading disabled
2010/05/10 16:28:54 158 s dvbapi disabled
2010/05/10 16:29:24 158 s client(1) connect from 127.0.0.1 (pid=243, pipfd=
15)
2010/05/10 16:29:25 243 c01 encrypted newcamd:30100-client 127.0.0.1 granted
(hdplus, au=hdplus)
2010/05/10 16:29:25 243 c01 user hdplus authenticated successfully (using cli
ent 4343)
2010/05/10 16:29:25 243 c01 AU flag 0 for user hdplus
hier die cccam.cfg auf der Dbox noch
N: 127.0.0.1 30100 hdplus hdplus 01 02 03 04 05 06 07 08 09 10 11 12 13 14
SERVER LISTEN PORT = 16000
F: hdplus1 hdplus1
dann auf dem kathi die cccamd.list
C: 192.168.0.200 16000 hdplus1 hdplus1
und die mg_cfg
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }
# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }
# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 02 }
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.3, later not work)
G: { 32 }
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30
# network ecm timeout in seconds
K: { 05 }
# newcamd dead routes connect retry, sec
Q: { 600 }
# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 02 }
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 02 } username password
# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80
# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 00 } 172.16.1.1 28007 /tmp/mgcamd.log
# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }
# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }
# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 11 }
# map all 180x nagra caids to 1801
# default is 01
F: { 01 }
Zitieren