Hallo liebe Gemeinde,
ich habe eine DBox2 und zwei Kathi`s mit AAF Indian Summer E2 BA Image,die ich im Heimnetz mit camd3.902 und HD am laufen habe,aber leider immer mal mit Auf- hängern einer der Boxen.Jetzt habe ich mir auf einer der Kathi (iP:192.168.178.29) das MGcamd1.33.sh4 per Online installiert und folgendes in der
newcamd.list eingetragen: CWS = 192.168.178.027 25030 server1 passwort1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 und in der
mg_cfg:
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }
# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }
# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 02 }
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
U: { 01 }
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /data/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
G: { 01 }
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30
# network ecm timeout in seconds
K: { 05 }
# newcamd dead routes connect retry, sec
Q: { 600 }
# network shares priority
# 00 gbox, newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd, gbox
# 02 newcamd, camd3, gbox, radegast
P: { 02 }
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } root dreambox
# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80
# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 02 } 172.16.1.1 28007 /tmp/mgcamd.log
# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }
# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }
# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
B: { 00 }
und in der DBox2:
newcs:
<newCSconfig>
<readers name="Dbox">
<device>
<name>Multicam</name>
<type>dbox</type>
<mhz>600</mhz>
<node>/dev/tts/1</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>000000000000000000000000000000000000000000000 0000000000
000000000000000000000
00000000000000000000000000000000000000000000000000 0000000000000000000000000
00000
0
00000000000000000000000000000000000000000000000000 0000000000000000000000000
00000
0
000000000000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>000000000000000000000000000000000000000000000 0000000000000000000000000
000000
00000000000000000000000000000000000000000000000000 0000000000000000000000000
00000
0
00000000000000000000000000000000000000000000000000 0000000000000000000000000
00000
0
000000000000000000</ipk>
<ucpk>00000000000000000000000000000000000000000000 0000000000000000000000000
0000000
00000000000000000000000000000000000000000000000000 0000000000000000000000000
00000
0
00000000000000000000000000000000000000000000000000 0000000000000000000000000
00000
0
000000000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>25030</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
</readers>
<radegastserver>
<enabled>No</enabled>
<port>16000</port>
<allow>
<hostname>localhost</hostname>
</allow>
</radegastserver>
<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
<debug>
<password>NewCSpwd</password>
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<tcp_port>1001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
<httpd>
<server>
<port>12345</port>
<enabled>yes</enabled>
</server>
<user>
<name>Hanna</name>
<password>Jan</password>
<accesslevel>admin</accesslevel>
</user>
</httpd>
<newcamdserver>
<user><name>server3</name><password>passwort3</password><hostname></hostnam
e><port></port><au>yes</au><spider>yes</spider><sidoverride>yes</sidoverrid
e><rate>0</rate></user> <enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user><status>access</status>
<name>server</name>
<password>passwort</password>
<hostname></hostname>
<port></port>
<au>on</au>
<spider>on</spider>
<sidoverride>on</sidoverride>
<rate>2</rate>
</user>
<user><status>access</status>
<name>server1</name>
<password>passwort1</password>
<hostname></hostname>
<port></port>
<au>on</au>
<spider>on</spider>
<sidoverride>on</sidoverride>
<rate>0</rate>
</user>
<user><status>access</status>
<name>server2</name>
<password>passwort2</password>
<hostname></hostname>
<port></port>
<au>on</au>
<spider>on</spider>
<sidoverride>on</sidoverride>
<rate>0</rate>
</user>
</newcamdserver>
</newCSconfig>
Newcamd Port: 25030 - CAID: 1702 - Reader: 0 (Multicam)
ID Username Status Ok ECM Bd ECM EMM Hostname Client Spdr AU SO
02 server3 Offline 0 0 0 Offline Offline
03 server 00d 23:39:xx 12149 0 2939 192.168.178.27 CCcam
04 server1 00d 23:36:xx 0 0 0 192.168.178.29 Generic
05 server2 00d 15xx 3366 3258 3584 192.168.178.28 Generic
Speetport Einstellungen:
Informationen über alle vergebenen Ports, sortiert nach Öffentlicher Port-Adresse:
Öffentlicher Port Private Client Port Bezeichnung Zugeordnete IP-Adresse
TCP: 25030 25030 Web-Server 192.168.178.29
aber es wird leider nichts Hell auf der Kathi!
Woran kann das vielleicht liegen?
Danke.
MfG
