Also, ich stelle leicht abgewandelt meine Konfiguration hier rein!
Wer findet den Fehler…. ;-) B I T T E ! ! !
Habe eine S02-Karte.
Meine Dreambox 800 HD hat die interne IP-Adresse 192.168.1.6,
meine D-Box2 192.168.1.5 und meine Kathi 192.168.1.4
Zunächst will ich mal nur die DBox (Client) und die Dream (Server) zum laufen bekommen.
Mein Router (FritzBox) hat die IP 192.168.1.1. Hier habe ich die DynDns-Adresse DM800.dyndns.org (Name von der Redaktion geändert ;-) ) eingerichtet. Ich habe als Portfreigabe Port 12000 an 192.168.1.6 zu Port 12000.
Auf meine Dream habe ich, wie hier ja auch besprochen, das Gemini2-430 gepackt.
Über den Blue-Panel habe ich über Inet die CCcam2.1.1 geladen. Die beinhaltet u. a. das Startscript für die NewCS 1.66. Weiter lade ich dann die NewCS 1.66, die CCcam-Config vom 27.03.2009 und die NewCS-Config vom 10.11.2008 vom Server.
Wenn ich nur die CCcam starte geht die Karte in der Dream sofort auf. Die CCcam.cfg sieht wie folgt aus:
F: user1 pass1
N: 127.0.0.1 34000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 # Ich vermute, dass die N-Line nicht nötig ist, wenn ich die CCcam allein gestartet wird, schadet aber auch nicht, oder?.
SERVER LISTEN PORT : 12000
Das Sartscript (CCcam_2.1.1_cam.sh) sieht wie folgt aus:
CAMD_ID=6098
CAMD_NAME="CCcam² 2.1.1"
CAMD_BIN=CCcam_2.1.1
INFOFILE_A=ecm0.info
INFOFILE_B=ecm1.info
INFOFILE_C=ecm2.info
INFOFILE_D=ecm3.info
#Expert window
INFOFILE_LINES=1111111111000000
#Zapp after start
REZAPP=0
########################################
logger $0 $1
echo $0 $1
remove_tmp () {
rm -rf /tmp/*.info* /tmp/*.tmp*
}
case "$1" in
start)
remove_tmp
/usr/bin/CCcam_2.1.1 &
;;
stop)
killall -9 CCcam_2.1.1 2>/dev/null
sleep 2
remove_tmp
;;
*)
$0 stop
exit 0
;;
esac
exit 0
Nun starte ich an meiner DBox ebenfalls die CCcam2.1.1.
In die CCcam schreibe ich lediglich die C-Line:
C: 192.168.1.6 12000 user1 pass1
Der einzige Erfolg seit Wochen!!!!! Die DBox wird hell!!!
Änder ich nun aber die C-Line, weil ich über’s Inet gehe in
C: DM800.dyndns.org 12000 user1 pass1
bleibt die DBox dunkel. WIESO???
Nun starte ich an der Dream die CCcam2.1.1/NewCS1.66
Die Karte geht ebenfalls sofort auf. Die CCcam.cfg sieht genauso wie oben aus. Das Script (CCcam_2.1.1_newcs_1.66_cam.sh) zum Starten sieht wie folgt aus:
CAMD_ID=6297
CAMD_NAME="CCcam² 2.1.1/NewCS² 1.66"
CAMD_BIN=CCcam_2.1.1
INFOFILE_A=ecm0.info
INFOFILE_B=ecm1.info
INFOFILE_C=ecm2.info
INFOFILE_D=ecm3.info
#Expert window
INFOFILE_LINES=1111111111000000
#Zapp after start
REZAPP=0
########################################
logger $0 $1
echo $0 $1
remove_tmp () {
rm -rf /tmp/*.info* /tmp/*.tmp*
}
case "$1" in
start)
remove_tmp
/usr/bin/newcs_1.66 &
sleep 15
/usr/bin/CCcam_2.1.1 -s &
;;
stop)
killall -9 newcs_1.66 CCcam_2.1.1 2>/dev/null
sleep 2
remove_tmp
;;
*)
$0 stop
exit 0
;;
esac
exit 0
An der DBox gebe ich nun, wie oben ja auch schon, die C-Line ein.
Sowohl die
C: 192.168.1.6 12000 user1 pass1
Als auch die Inet C-Line
C: DM800.dyndns.org 12000 user1 pass1
Machen die DBox nicht hell (*heul)!!!
Habe wirklich viele viele Stunden alles versucht, aber es geht nicht! Freue mich total, wenn mir jemand helfen kann.
Mit meiner Kathi frage ich dann im Anschluss, wenn ich noch darf….
Vielen vielen D A N K im Voraus!
Ach, es fehlt wohl noch die newcs.xml von der Dream:
<?xml version="1.0"?>
<!--
For setup-issues, look in readme.txt!
If there are other troubles, try different forums or irc channels around :o)
The configfile are NOT case-sensitive, and shouldnt care about dos/unix cr/lf.
** This is the example file for Dreambox/TD etc. that use SCI interfaces.
-->
<newCSconfig>
<readers name="Card Readers">
<device>
<name>lower</name>
<type>sci</type>
<mhz>600</mhz>
<node>/dev/sci0</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<!-- <boxkey>0000000000</boxkey> -->
<!-- <rsa>0000000000</rsa> -->
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</ipk>
<ucpk>00000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>34000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
<!-- <device> -->
<name>upper</name>
<type>sci</type>
<mhz>600</mhz>
<node>/dev/sci1</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<!-- <boxkey>0000000000</boxkey> -->
<!-- <rsa>0000000000</rsa> -->
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</ipk>
<ucpk>00000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>34001</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
<!-- </device> -->
<device>
<name>smargo</name>
<type>phoenix</type>
<mhz>600</mhz>
<parity>none</parity>
<node>/dev/usb/ttyUSB0</node>
<export>Yes</export>
<enabled>No</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>Yes</blockga>
<blockc0>No</blockc0>
<boxkey>00000000</boxkey>
<crypto-special>No</crypto-special>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>34002</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
<sid>
<allow>
</allow>
<deny>
<id></id>
</deny>
</sid>
</device>
</readers>
<radegastserver>
<enabled>No</enabled>
<port>16000</port>
<allow>
<hostname>localhost</hostname>
</allow>
</radegastserver>
<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
<httpd>
<server> <!-- Port to accept connections on -->
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>
<!-- valid value for userfile are:
Any username you'd like - Used for browser to logon (its case sensitive). -->
<name>newcs</name>
<!-- valid value for password are:
Any password you'd like - Used for browser to logon (its case sensitive). -->
<password>newcs</password>
<!-- valid value for accesslevel are:
admin, stats - Define what rights the user has in the web-console -->
<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>
<password>NewCSpwd</password>
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<tcp_port>1001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>dummy</name>
<password>dummy</password>
<hostname>localhost</hostname>
<port>12000</port>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
<rate>2</rate>
</user>
<user>
<name>mpcs</name>
<password>dummy</password>
<au>No</au>
<spider>No</spider>
<sidoverride>No</sidoverride>
<readers>
<allow>lower</allow>
<allow>smargo</allow>
</readers>
<rate>0</rate>
</user>
</newcamdserver>
</newCSconfig>
Nochmals BITTE!!!