Hallo alle Miteinander.
Habe ein kleines Prob mit der Kathi UFS 910. Möchte mit Mgcamd über einen
Router an einen Newcamd Server andoggen. Hier mal meine Mg_cfg, Newcamd.list, Log der Mgcamd nach dem verbinden sowie Auszug aus dem Webinterface.
Habe im Router Portweiterleitung aktiviert. Vermute mal es liegt aber am Port weil der newcamd route beim Eingang und Ausgang auf offline steht sowie Fehlermeldung as root failed ausgibt. Fummel jetzt schon 3 Tage daran rum und seh den Wald vor lauter Bäumen nicht. Kann mir jemand einen Tipp geben ???
// Mg_cfg
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }
# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }
# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 02 }
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
U: { 01 }
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /data/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
G: { 01 }
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30
# network ecm timeout in seconds
K: { 05 }
# newcamd dead routes connect retry, sec
Q: { 600 }
# network shares priority
# 00 gbox, newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd, gbox
# 02 newcamd, camd3, gbox, radegast
P: { 02 }
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } root kathrein
# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80
# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 00 } 192.168.1.XX 28007 /tmp/mgcamd.log
# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }
# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }
# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
B: { 00 }
// Newcamd.list
CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 15003
CWS = 127.0.0.1 34000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS = 127.0.0.1 34001 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS = 91.15.155.XXX 15003 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan
CWS = 192.168.1.XX 15004 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan
CWS = sxxx-forum.axx.xx 7655 age88 age88 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan newcs
Mgcamd.log
tuxbox mgcamd v1.31 by mixvt (compiled Oct 27 2008 23:09:59)
[mg] Net75s Show ecm:1, emm:1 Up:1 Au:2 Dir:0 Osd:no:80:0 Cache:7 Log192.168.1.xx:28007 Reread:0
[mg] Ecm cache time: 15
Box type: stapi
Conax.Key error 2: No such file or directory
Keys readed
Conax.Key error 2: No such file or directory
[config] newcamd route = root:127.0.0.1:34000
[config] newcamd route = root:127.0.0.1:34001
[config] newcamd route = root:91.15.xxx.xxx:15003 server
[config] newcamd route = root:192.168.1.xx:15004
[config] newcamd route = age88:xxx-forum.axx.xx:7655 server newcs
newcamd keep alive: 300, incoming port: 15003
[mgcam] emm thread started
[mgcamd] tps update started.
/data/keys/tps.bin error 2: No such file or directory
[newcamd] Connecting to 127.0.0.1:34000...
[newcamd] Connecting to 127.0.0.1:34001...
[newcamd] Connecting to 91.15.xxx.xxx:15003...
[newcamd] Connecting to 192.168.1.xx:15004...
[newcamd] Connecting to age88-forum.axx.xx:7655...
[newcamd] connection from 192.168.1.1
[mg0] service B index 0 pmt pid 0 (1)
ECM: CaID: 0x1837 -> CaPID: 0x1A44 ProvID: 000000
ECM: CaID: 0x1833 -> CaPID: 0x1844 ProvID: 000000
ECM: CaID: 0x1834 -> CaPID: 0x1C44 ProvID: 000000
ECM: CaID: 0x09C4 -> CaPID: 0x1B44 ProvID: 000000
[newcamd] Connection to 192.168.1.xx:15004 failed (104ms)
[newcamd] Login to 91.15.xxx.xxx:15003 as root failed (9ms)
[mg0] network can't decode
[mg0] pid 0x1A44 failed to decode.
[mg0] network can't decode
[mg0] pid 0x1844 failed to decode.
[mg0] network can't decode
[mg0] pid 0x1C44 failed to decode.
[mg0] network can't decode
[mg0] pid 0x1B44 failed to decode.
[mgcamd] emm started
EMM: CaID: 0x1702 -> CaPID: 0x1000 ProvID: 000000
EMM: CaID: 0x1722 -> CaPID: 0x1502 ProvID: 000000
*EMM: CaID: 0x1837 -> CaPID: 0x1004 ProvID: 000000
*EMM: CaID: 0x1833 -> CaPID: 0x1002 ProvID: 000000
*EMM: CaID: 0x1836 -> CaPID: 0x1002 ProvID: 000000
EMM: CaID: 0x09C4 -> CaPID: 0x1008 ProvID: 000000
EMM: RSA Nagra2 key not found for id 3501 (pid 0x1004)
MGCamd Share Info
--------------------------------------------------------------------------------
newcamd route 0000:root:127.0.0.1:34000:unknown EMM OFF online
newcamd route 0000:root:127.0.0.1:34001:unknown EMM OFF online
newcamd route 0000:root:91.15.xxx.xxx:15003:unknown EMM OFF offline
newcamd route 0000:root:192.168.1.xx:15004:unknown EMM OFF offline
newcamd route 0000:plage88:saidia-forum.ath.cx:7655:unknown EMM OFF online
MGCamd Status
--------------------------------------------------------------------------------
tuxbox mgcamd v1.31 by mixvt (compiled Oct 27 2008 23:09:59), Sun Apr 12 16:26:56 2009
mg uptime 00d 00h 02m 02s, service changes: 1, ecm processed: 0, lost cw warnings: 0
Newcamd:
Host/port Recon. Emm out Ecm out Cw in Avg. ecm time
127.0.0.1 :34000 0 0 0 0 0
127.0.0.1 :34001 0 0 0 0 0
91.15.xxx.xxx :15003 0 0 0 0 0
192.168.1.xx :15004 0 0 0 0 0
xxx-forum.axx.xx : 7655 0 0 0 0
Box: uptime = 171s, CPU load: 1 min 131968 / 5 min 59520 / 15 min 22464
RAM in bytes: total 30609408 / free 1216512 / shared 0 / buffers = 2031616
mgcamd: total memory allocated by malloc, in bytes: 135168 (132kb), chunks 96248