Ist die Netzwerkverbindung ok(Netzwerktest Kathi),kommt das Abo von außen,Du schreibst ,das Du kein MC hast ? Wenn Du kein MC hast ,sind die C-Liners und MPCS überflüssig.
fpür deine antwort.
will eigentlich nur hd über www auf meiner kathi ufs 2.0e auf Ba.
das ganze ging -ohne hd- mit keywelt auf dbox , gbox oder mbox und mgcamd auf kathi.
leider bekomme ich die kathi nicht mal mehr verbunden seit deinem image.
und das ist ja kein hexenwerk.
www und neztwerk geht an beiden boxen.
hab schon an den den router gedacht - leider speedport 900v
hab ne prem karte ohne hd - - die könnte ich evtl über ext. cardreader sharen
ist mir aber zweitranging grade.
kannst du mir irgendwie helfen - muss ich was umstellen an deinem image?
komm mir grade vor wie der grösste depp und freundin ist auch schon sauer
na das ist ein ostern
thx
kirk
Wie Jetzt ,ist die D_Box mit Gbox dein Server und die Kathi Client ?
dbox( mit deinem image, mit gbox 2.25 oder mbox) ist server on local card - die kommt über www
und kathi ist client an der dbox- geht über mgcamd 1.31- halt ohne hd
über gbox sh40 geht es nicht.
FRAGE: du hast hier in deinem 1. posting geschrieben es soll eine cwshare auf die die kathi - aber das funzt bei mir nicht - die peer.cfg geht für mgcamd - ist aber gleicher inhalt.
komisch eigentlich. - ohne die peer.cfg - also nur mit einer cwshare.cfg -bekomme ich keine connect zu dbox.
und mit gbox bleibt alles schwarz.
das ich keinen connect zur dbox bekommen hatte lag daran das ich nur eine cwshare.cfg hatte - so wie du beschrieben hattest - und die peer.cfg gelöscht hatte.
was könnte ich tun?
werde noch verrückt mit dem hd thema.
THX und frohe ostern
kirk
um was nicht voellig falsch verstanden zu haben folgende frage
würde so mit deine konf gehen HD über www auf meine kathi zu bekommen?
oder geht das so nicht? sondern nur hd über interne karte?
was kann ich so machen mit deiner konf ohne multicam?
DAnke
kirk
Ja HD von außen geht damit ,geht mit jeder richtig konfigurierten Mbox ,unter der Voraussetzung das es einer richtig einspielt.
habe jetzt verbindung zu meiner dbox - leider geht nur premiere - OHNE HD und mtv. auch die oessis gehen nicht auf. mit mgcamd geht das alles an der kathi
mit deinem image habe ich komischerweise viele freezes - die hatte ich mit dem keywelt nicht. - was ich nicht habe ist die upgradet d-line. das hab ich nicht wirklich verstanden. müssen da meine peers auch was ändern?
was meinst du mit von aussen richtig einspielen? was muss geändert werden?
SORRY für meine dummheit!
könntest du mir irgendwie helfen?
hier mal meine cfg aus der kathi und der dbox:
hoffe das ist ok das hier zu posten - falls noch was fehlt oder wichtig wäre
dann bitte ich um info.
DANKE FÜR JEDE HILFE VON JEMANDEM DER VOR DURCHDREHEN IST
THX
KIRK
cw share:
M: { 192.168.002.100 { 12345678 }}
#IMPORTANT !!!
#About D line in cwshare.cfg file ...
#Now you can set what provids boxids you want to reshare with another peer(s)
D: { 192.168.002.101 { 56565 56565 { 555AAA59 { 3 3 }}}}
#This is standard D line
#=======================
#This is my new upgraded D line
#===============================
#D: { IP { port1 port2 { pass { level1 level2 }}}}
#{ 0000 } { 0 } send filter
#{ 0000 } { 0 } receive filter
#D: { IP { port1 port2 { pass { level1 level2 }}}}
#{ xxyy !!in hex!!!} { provid-boxid-boxid;provid;provid-boxid; ...!!in hex!!!} send filter
#{ xxyy !!in hex!!!} { provid-boxid-boxid;provid;provid-boxid; ...!!in hex!!!} receive filter
#for both brascets
#xx -> 00 disabled
#xx -> 01 allow only this cards for provid to be reshared received
#xx -> 02 denied only this cards for provid to be reshared received
#yy -> how much provids is in next brascet dont caculate boxids
#1st example:
#============
#D: { IP { port1 port2 { pass { level1 level2 }}}}
#{ 0102 } { 0001006A;0001006C-0A0A-0B0B; }
#{ 0102 } { 00010080;00010081-0A0A-0B0B; }
#{ 0102 } { 0001006A;0001006C-0A0A-0B0B; }
#xx is 01 ,ALL cards for (0001006A) provid is SENT to peer AND cards with boxid 0A0A,0B0B for provid 0001006C, ALL others provids(cards) will NOT be sent!!
#yy is 02 ,there is only 2 provids in next bracket dont caculate boxids
#{ 0102 } { 00010080;00010081-0A0A-0B0B; }
##xx is 01 ,ALL cards for (00010080) provid is RECEIVED from peer AND cards with boxid 0A0A,0B0B for provid 00010081, ALL others provids will be IGNORED!!
#yy is 02 ,there is only 2 provids in next bracket dont caculate boxids
#2nd example:
#============
#D: { IP { port1 port2 { pass { level1 level2 }}}}
#{ 0202 } { 0001006A;0001006C-0A0A-0B0B; }
#{ 0202 } { 00010080;00010081-0A0A-0B0B; }
#{ 0202 } { 0001006A;0001006C-0A0A-0B0B; }
#xx is 02 ,ALL cards for this (0001006A) provid is NOT sent to peer AND cards with boxid 0A0A,0B0B for provid 0001006C, ALL others provids(cards) are !!
#yy is 02 ,there is only 2 provids in next bracket dont caculate boxids
#{ 0202 } { 00010080;00010081-0A0A-0B0B; }
#xx is 02 ,ALL cards for (00010080) provid is NOT RECEIVED from peer AND cards with boxid 0A0A,0B0B for provid 00010081, all others provids will be received!!
#yy is 02 ,there is only 2 provids in next bracket dont caculate boxids
N#OTICE: MBOX WILL NOT COMPLAIN IF YOU USE OLD D LINE STYLE !!!!!!!!!!!!!
#Working with TCP protocol
#=========================
#Just rename D with TCP,example
#TCP0: { IP { port1 port2 { pass { level1 level2 }}}}
#TCP1: { IP { port1 port2 { pass { level1 level2 }}}}
# or my upgraded D line
#TCP0: { IP { port1 port2 { pass { level1 level2 }}}}
#TCP1: { IP { port1 port2 { pass { level1 level2 }}}}
#{ xxyy !!in hex!!!} { provid-boxid-boxid;provid;provid-boxid; ...!!in hex!!!}
#{ xxyy !!in hex!!!} { provid-boxid-boxid;provid;provid-boxid; ...!!in hex!!!}
#IMPORTANT: NOT YET INPLEMENTED !!!
#aus musicnappers glj
O: { 2000 2000 }
N: { 00 01 03 1F 3000 5000 }
{ 0000 } { 0 } send filter
{ 0000 } { 0 } receive filter
#Connecting to newcamd server program Newcs
#==========================================
#example:
#[second brascet] -> { x } max. number ecms in buffer
#[third brascet] { 0100006a:0100006B;} is used if you want to change caidprovid from what newcs detected to caidprovid to use with gboxx protocol so 0100006A will be 0100006B in gboxx protocol
#[last brascet] -> forbiden SID pids
#Resending ECM(s) on timeout interval
#====================================
#O: { xxxx yyyy }
#example:
#O: { 4000 2000 }
#4000 (4 seconds)-> resend current ecm on boxid if no dcw
#2000 (2 seconds)-> wait 2 more seconds for dcw ,if no dcw on time resend ecm(s) to all boxid's
#NDS system ->Resending ECM(s) on timeout interval
#=================================================
#N: { xxxx yyyy }
#example:
#N: { 400 200 }
#default disabled...
#Add more cards for CaidProvid
#=============================
#X+: { xxxxyyyy:zz;xxxxyyyy:zz; } // zz -> max. is 30 !!!!!
#example:
#X+: { 0100006A:15; }
#With X+ active, for caidprovid:0100006A max. cards for use is 15.
I: {3} #sharetiefe empfangen
X: {5} # send EMM macimum to t cards
W: { 01 01 01 } 1FFF
# AutoUpdate
# 00 is ignored (default)
# 01 enable AU
# 02 Auto AU !!!!! always use this !!!!!
A: { 02 }
# Key update
# 01 update only new keys, default setting
# 02 udate all keys (used for valid PMK checking)
U: { 01 }
//H option -> C line priority over network cards
H: { 1 }
// x=0 -> disabled -> newtwork cards has priority over your local cards
// x=1 -> enabled -> your local cards has priority over network cards
// default disabled
#debug
Z: {01 01}
#debug
# Trace/Debug
# xx yz ; xx=00 no konsole output
# xx yz ; xx=01 konsole output
# xx yz ; y=0 debug output (don't use)
# xx yz ; y=1 no debug output
# xx yz ; z=0 ouput to konsole
# xx yz ; z=1 output to /var/tmp/debug.txt
# xx yz ; z=2 Output to UDP (to capture with gboxt)
----------------------------------------------------------------------------
und hier die mbox.cfg
//mbox.cfg EXPLANATION and EXAMPLES
D: { 3 }
//D: { x }
//x=0 -> disable
//x=1 -> enable dbox2 cw writing
//x=2 -> enable STAPI for IPBOX
//x=3 -> enable STAPI for Kathrein
//default disabled
B: { 1 }
//B: { x }
//x=0 -> disable local UDP ports 8004-80xx ,this ports are used with DVB cards and gbox plugin (Windows and Linux)
//x=1 -> enable
//default disable
Z: { 11 } { 192.168.64.211 8006 }
// Z option -> control sending/writing current informations
// Z: { xy } { IP port }
// x=0 -> don't print time stamp (in console screen and in debug file)
// x=1 -> print time stamp ( .... )
// y=0 -> no writing/sending informations to debug file/destination IP
// y=1 -> send informations to destination IP but not in debug file
// y=2 -> write informations to debug file but don't send to destination IP
// y=3 -> write/send informations to debug file/destination IP
// IP port -> destination IP and UDP port where to send informations
// no default
#C: { 127.0.0.1 7999 }
// C option -> control receiving some command messages localy or from another IP
// C: { IP port }
// IP-> your local IP or you DNS
// port -> on what port you will be waiting command messages
// no default
U: { 1 }
// U options -> Update peer(s) IP if it changes while peer still resending ecm's/cw etc.. information
// default only on hello message peer(s) IP are updated !!!
// U: { x }
// x=0 -> disabled
// x=1 -> enabled
// default disabled
L: { 1 }
// L option -> how mbox to menage virtual card(s) with level 0
// ( only for peer(s) who have and can reshare virtual cards but don't want to use LEVEL 0 card(s) for them self)
// L: { x }
// x=0 -> don't load any virtual cards with LEVEL 0, you can't use them for your self
// x=1 -> load all virtual cards with LEVEL 0 ,you will be using them for your self
// default 1
T: { /tmp/ }
// T option -> where to store temp files ... (share.info,debug.txt ,etc.)
// T: { folder_path_to_files, example: T: { /tmp/ } }
// default 0 ===> folder path where mbox.xxx file is !!!!
K: { /data/keys/ }
// K option -> where is cwshare.cfg file
// K: { folder_path_to_files, example: K: { /var/keys/ } }
// default 0 ===> folder path where mbox.xxx file is !!!!
E: { 1 }
// E option -> disable same cards from peers
// E: { x }
// x=0 -> use same cards(boxids) from peers
// x=1 -> don't use same cards(boxids) from peers
// default 1
M: { 1 }
// M option -> Mode option
// M: { x }
// x=0 -> local mode no NET
// x=1 -> NET mode
// default 0
P: { /tmp/pmt.tmp }
// P option -> PMT location (Dont used with linux and windows)
// you must be tuned to channel so image can generate this file
// { /tmp/pmt.tmp } for resivers and images that create this file <- use this if you can
// { 1/tmp/camd.socket } for enigma 1
// { 2/tmp/camd.socket } for enigma 2
W: { 1 }
// W option -> write raw ECM to ecm.raw file
// W: { x }
// x=0 -> disabled
// x=1 -> enabled
// default disabled
-------------------------------------------------------------------------------
und hier cwshare aus der dbox:
M: { xxx.dyndns.org { 555AAA59 }}
O: { 2000 2000 }
#div dlines nach diesem muster ohne ergänzung!!
D: { xxx.dyndns.org { 56565 35555 { 5663C02A { A3 A3 }}}}
###D: { 192.168.2.100 { 02497 02498 { 12345678 { A3 A3 }}}}
D: { 192.168.2.100 { 56565 56565 { 12345678 { A3 A3 }}}}
#D: { 192.168.002.100 { 56565 12164 { FA5BDEFE { A3 A3 }}}}
#D: { 192.168.002.100 { 56565 56565 { 87654321 { A3 A3 }}}}
C: { 127.0.0.1 15000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 } { 10 } { 1702FFFF:17020000 }
C: { 127.0.0.1 15001 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 } { 10 } { 1833FFFF:18330000 }
N: { 00 01 03 1F 2000 4000 }
I: { 03 }
X: { 05 }
-------------------------------------------------------------------------------
und hier die gbox aus der dbox
//mbox.cfg EXPLANATION and EXAMPLES
D: { 1 }
//x=0 -> disable
//x=1 -> enable dbox2 cw writing
//x=2 -> enable STAPI for IPBOX
//x=3 -> enable STAPI for Kathrein
//default disabled
B: { 1 }
//B: { 0 }
//x=0 -> disable local UDP ports 8004-80xx ,this ports are used with DVB cards and gbox plugin (Windows and Linux)
//x=1 -> enable
//default disable
#Z: { 12 } { 127.0.0.1 8000 }
Z: { 11 } { 192.168.002.160 8080 }
// Z option -> control sending/writing current informations
// Z: { xy } { IP port }
// x=0 -> don't print time stamp (in console screen and in debug file)
// x=1 -> print time stamp ( .... )
// y=0 -> no writing/sending informations to debug file/destination IP
// y=1 -> send informations to destination IP but not in debug file
// y=2 -> write informations to debug file but don't send to destination IP
// y=3 -> write/send informations to debug file/destination IP
// IP port -> destination IP and UDP port where to send informations
// no default
// C option -> control receiving some command messages localy or from another IP
// C: { IP port }
// IP-> your local IP or you DNS
// port -> on what port you will be waiting command messages
// no default
U: { 1 }
// U options -> Update peer(s) IP if it changes while peer still resending ecm's/cw etc.. information
// default only on hello message peer(s) IP are updated !!!
// U: { x }
// x=0 -> disabled
// x=1 -> enabled
// default disabled
L: { 0 }
// L option -> how mbox to menage virtual card(s) with level 0
// ( only for peer(s) who have and can reshare virtual cards but don't want to use LEVEL 0 card(s) for them self)
// L: { x }
// x=0 -> don't load any virtual cards with LEVEL 0, you can't use them for your self
// x=1 -> load all virtual cards with LEVEL 0 ,you will be using them for your self
// default 1
F: { 500 }
//F option -> reset writing debug.txt from begining if file size is higher then (x)(KB)
//F { x } -> decimal in KBytes
//default 500 KB
#G: { /hdd/ }
//G option -> redirect writing ONLY debug.txt file to internal or external HDD in receivers or for any other reason.
//Remove #, ONLY if you want to use this option !!!!!!!
T: { /tmp/ }
// T option -> where to store temp files ... (share.info,debug.txt ,etc.)
// T: { folder_path_to_files, example: T: { /tmp/ } }
K: { /var/keys/ }
// K option -> where is cwshare.cfg file
// K: { folder_path_to_files, example: K: { /var/keys/ } }
E: { 1 }
// E option -> disable same cards from peers
// E: { x }
// x=0 -> use same cards(boxids) from peers
// x=1 -> don't use same cards(boxids) from peers
// default 1
M: { 1 }
// M option -> Mode option
// M: { x }
// x=0 -> local mode no NET
// x=1 -> NET mode
// default 0
P: { /tmp/pmt.tmp }
// P option -> PMT location (Dont used with linux and windows)
// you must be tuned to channel so image can generate this file
// { /tmp/pmt.tmp } for resivers and images that create this file <- use this if you can
// { 1/tmp/camd.socket } for enigma 1
// { 2/tmp/camd.socket } for enigma 2
W: { 0 }
// W option -> write raw ECM to ecm.raw file
// W: { x }
// x=0 -> disabled
// x=1 -> enabled
// default disabled
H: { 0 }
//H option -> C line priority over network cards
// H: { x }
// x=0 -> disabled -> newtwork cards has priority over your local cards
// x=1 -> enabled -> your local cards has priority over network cards
// default disabled
Q: { 30 }
//Q option -> newcamd connect retry in sec.
//Q: { x }
// default 300 sec.
---------------------------------------------------------------------------
Geändert von dirk01 (14.04.09 um 20:21 Uhr)
Die Gbox darin brauchst Du nicht ,die ist zum probieren,nur die Mbox wird genutzt,und dazu muss MPCS als Cardserver laufen.Hast Du HD auf Deiner lokalen Karte ???(Abo)
Wo zu ist die port.list wichtig? Kathrein 910 mit mbox als klient!
Hallo
gute fragen mich interessiert auch.
mfg
dinamikos
Beim Clienten brauchst die nicht ,einfach weglassen, die ist für den Server und bestimmt ,was an MPCS/Newcs weiter geleitet wird.
Wie muss denn meine Port.list bei FreeXtv aussschauen. Hab jetzt mal alles soweit wie nachfolgen angegeben eingetragen. Allerdings weiß ich nicht welche der 3 localen Cards ich über die G-Line ausschließen muss. Wie bekomm ich das denn raus?
Hab die Local Cards in die G-Line gleich eingefügt, weiß allerdins nicht welche ich ausschließen muss.PHP-Code:
R: { 1500 }
SA: { 21B8 } // X-Dream TV
SA: { 3786 } // Dorcel
SA: { 0086 } // Freex TV
SA: { 0082 } // FreeX TV 2
#G: { 05004400 }
#G: { 05004410 }
#G: { 0500F830 }
Die sidpid sind ok. Es wird aber einfach nicht hell. Die Karte funktioniert. Das hab ich über Newcs-->CCcam auf meiner dbox getestet.
Hat jemand sonst noch ne Idee an was es liegen könnte? Die Verbindung Mbox-->Newcs steht und sollte eigentlich funktionieren, Hoffe mal, dass es an der Port.list liegt.
Jeder Reader (Karte ) bekommt einen eigenen Port und somit auch eine eigene Port.list,somit ist jede Karte individuell zu konfigurieren.
Jo, ich hab aber nur einen Reader und eine Karte. Und das is ne FreeXTV Karte. Und es werden aber im MCC immer 3 angezeigt.
Das gleiche Spiel lief auch schon mit der Premiere Card, da waren immer 4 Karten in MCC und ich musst dort auch über die G-Line 3 davon ausschließen.
Somit kam nur noch die 17020000 Karte durch.PHP-Code:
G: { 17020001 }
G: { 17020002 }
G: { 17020003 }
Und das gleiche will ich jetzt mit der neuen FreeXTV Karte auch machen. Ich weiß allerdings nicht welche der Karten raus muss.
Und wie kann ich das feststellen. Oder kann ich einfach 2 davon in die G-Line eintragen?PHP-Code:
G: { 05004400 }
G: { 05004410 }
G: { 0500F830 }
Und muss ich die Karten noch hinter der C-Line mappen? Wenn ja von was auf was.
Hab auf der Kathi Mbox und auf der Dbox2 Newcs und nen ext. Reader mit der Freextv Karte.
Sonst passt alles. Is bis gestern mit der Premiere Karte auch normal gelaufen.