falls sie mal jemand braucht, hier noch die zusätzlichen einträge für die portlist, um beim fußballabend /-nachmittag einmal alle spiele zu genießen!
E: { 17AA } // Sport
E: { 170C } // Sport
E: { 17AC } // Sport
E: { 1702 } // Sport
E: { 1704 } // Sport
E: { 1706 } // Sport
E: { 1702 } // Sport
E: { 1708 } // Sport
E: { 170A } // Sport
Aber Vorsicht,wenn keine Spiele laufen und irgendwer in der Share auf Direkt zappt,kann die Share überschwemmt werden,was zu bösen Rucklern führen kann.
Hallo Freunde,
mittlerweile läuft mein mpcs 1.0 mit der mbox 023 auf meiner DB 7020 mit der s02 Karte sehr gut.Werde aber demnächst eine Aljazeera Sport Karte bekommen und würde diese gerne auch über mpcs und mbox über den 2 internen Kartenleser laufen lassen.Weiß vielleicht da jemand was ich da noch einstellen muß?
Vielen Dank
Gruß
slim
Hallo
ich haben auch ein fragen. server gbox kathrein client mit mbox ist möglich in andere zimmer weitergeben mit mbox?
mfg
dinamikos
Natürlich,jeder Mboxclient ist auch Server und reicht die virtuellen Karten weiter,bis der Sharelevel erschöpft ist.Zitat von dinamikos
Hi
danke für dein antwort.aber bitte ich bin nue mit der thema .bitte geben mir weiter info wie soll alles aus sehen.
mfg
dinamikos
hier ist der mbox.cfg von dbox2 .ist das richtig?
//mbox.cfg EXPLANATION and EXAMPLES
D: { 1 }
//D: { x }
//x=0 -> disable
//x=1 -> enable dbox2 cw writing
//x=2 -> enable STAPI for IPBOX
//x=3 -> enable STAPI for Kathrein
//x=4 -> enable Linux DVB API for Kathrein
//default disabled
B: { 0 }
//B: { x }
//x=0 -> disable local UDP ports 8004-80xx ,this ports are used with DVB cards and gbox plugin (Windows and Linux)
//x=1 -> enable
//default disabled
Z: { 12 } { 127.0.0.1 8000 }
// Z option -> control sending/writing current informations
// Z: { xy } { IP port }
// x=0 -> don't print time stamp (in console screen and in debug file)
// x=1 -> print time stamp ( .... )
// y=0 -> no writing/sending informations to debug file/destination IP
// y=1 -> send informations to destination IP but not in debug file
// y=2 -> write informations to debug file but don't send to destination IP
// y=3 -> write/send informations to debug file/destination IP
// IP port -> destination IP and UDP port where to send informations
// no default
#C: { 127.0.0.1 7999 }
// C option -> control receiving some command messages localy or from another IP
// C: { IP port }
// IP-> your local IP or you DNS
// port -> on what port you will be waiting command messages
// no default
U: { 1 }
// U options -> Update peer(s) IP if it changes while peer still resending ecm's/cw etc.. information
// default only on hello message peer(s) IP are updated !!!
// U: { x }
// x=0 -> disabled
// x=1 -> enabled
// default disabled
L: { 1 }
// L option -> how mbox to menage virtual card(s) with level 0
// ( only for peer(s) who have and can reshare virtual cards but don't want to use LEVEL 0 card(s) for them self)
// L: { x }
// x=0 -> don't load any virtual cards with LEVEL 0, you can't use them for your self
// x=1 -> load all virtual cards with LEVEL 0 ,you will be using them for your self
// default 1
#G: { /hdd/ }
//G option -> redirect writing ONLY debug.txt file to internal or external HDD in receivers or for any other reason.
//Remove #, ONLY if you want to use this option !!!!!!!
T: { /tmp/ }
// T option -> where to store temp files ... (share.info,debug.txt ,etc.)
// T: { folder_path_to_files, example: T: { /tmp/ } }
K: { /var/keys/ }
// K option -> where is cwshare.cfg file
// K: { folder_path_to_files, example: K: { /var/keys/ } }
E: { 1 }
// E option -> disable same cards from peers
// E: { x }
// x=0 -> use same cards(boxids) from peers
// x=1 -> don't use same cards(boxids) from peers
// default 1
M: { 1 }
// M option -> Mode option
// M: { x }
// x=0 -> local mode no NET
// x=1 -> NET mode
// default 0
P: { /tmp/pmt.tmp }
// P option -> PMT location (Dont used with linux and windows)
// you must be tuned to channel so image can generate this file
// { /tmp/pmt.tmp } for receivers and images that create this file <- use this if you can
// { 1/tmp/camd.socket } for enigma 1
// { 2/tmp/camd.socket } for enigma 2
W: { 0 }
// W option -> write raw ECM to ecm.raw file
// W: { x }
// x=0 -> disabled
// x=1 -> enabled
// default disabled
H: { 0 }
//H option -> C line priority over network cards
// H: { x }
// x=0 -> disabled -> newtwork cards and local cards has same priority
// x=1 -> enabled -> your local cards has priority, no network cards used
// default disabled
Q: { 300 }
//Q option -> newcamd connect retry in sec.
//Q: { x }
// default 300 sec.
F: { 500 }
//F option -> reset writing debug.txt from begining if file size is higher then (x)(KB)
//F { x } -> decimal in KBytes
//default 500 KB
Geändert von dinamikos (17.03.09 um 21:42 Uhr)
stell mal Deine MPCS server,user,services hier rein,dann sehen wir mal.
Also hier ist die conf.
dann die server[global]
Nice = -1
ClientTimeout = 5
ClientMaxIdle = 120
CacheDelay = 0
BindWait = 60
ResolveDelay = 30
LogFile = /dev/null
Sleep = 0
#ServerIP = 192.168.178.3
Locals = 17220000
IgnoreList = /var/keys/ignore.list
[monitor]
Port = 8000
NoCrypt = 127.1.1.1
NoCrypt = 10.0.0.0-10.255.255.255
NoCrypt = 172.16.0.0-172.31.255.255
NoCrypt = 192.168.0.0-192.168.255.255
AULow = 120
MonLevel = 4
[newcamd]
Port = 15000@1722:FFFFF;15001@1834:FFFFF
Key = 0102030405060708091011121314
und die user[reader]
Label = multicam
Protocol = mouse
Device = /dev/tts/1
EMMCache = 1,3,2
Detect = DSR
CAID = 1722,1834
Group = 1
und nun die service[account]
User = dummy
Pwd = dummy
Group = 1
1801to1722 = 1
AU = multicam
MonLevel = 4
an dieser Datei hab ich bis jetzt noch nichts geändert.[premiere]
caid=1702,1722
srvid=000A,000B,002B,0009,0022,0029,0014,0204,0017 ,0010,002A,0203,0024,001C,0013,000E,000D,000F,000C ,0016,0206,0018,00A8,0015,0012,0011,001B,0309,00D0 ,00D1,00D2,00D3,00D4,00DC,00DD,00DE,00F0,00F1,00F2 ,00F3,00F4
[arena]
caid=1702,1722
srvid=0032,00F4,00DC,00E3,00E1,00F2,00F3,00D4
[kdhome]
caid=1702,1722
srvid=C3B5,C3B6,C3B7,C3B8,C3B9,C3BA,C3BB,C3BC,C3BD ,C3BF,C47D,C47E,C47F,C480,C481,C482,C483,C60E,C60F ,C610,C612,C613,C614,C615,C616,D035,D036,D099,D09C ,D09E,D0A1,D0A3,D0A4
Editor Programm ist übrigens Kate.
Nix zu beanstanden,jetzt bitte die C-Lines aus der cwshare.cfg
kurz und bündig
C: { 127.0.0.1 15000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 } { 10 } { 1722FFFF:17220000 }
C: { 127.0.0.1 15001 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 } { 10 } { 1834FFFF:18340000 }
So,
hab mal das mpcs.log aktiviert und siehe da,
kann es sein, das die D02 Karte mit der mpcs nicht geht?2009/03/20 22:23:44 892 s version=0.9c-gbx-Beta5.3, system=powerpc-dbox2-linux, nice=-1
2009/03/20 22:23:44 892 s max. clients=29, client max. idle=120 sec
2009/03/20 22:23:44 892 s max. logsize=unlimited
2009/03/20 22:23:44 892 s client timeout=5 sec, cache delay=0 msec
2009/03/20 22:23:44 892 s shared memory initialized (size=470684, fd=3)
2009/03/20 22:23:45 892 s auth size=4636
2009/03/20 22:23:45 892 s services reloaded: 0 services freed, 3 services loaded
2009/03/20 22:23:45 892 s userdb reloaded: 0 accounts freed, 1 accounts loaded
2009/03/20 22:23:45 892 s signal handling initialized (type=sysv)
2009/03/20 22:23:45 892 s 2277 service-id's loaded
2009/03/20 22:23:45 892 s monitor: initialized (fd=7, port=8000)
2009/03/20 22:23:45 892 s camd 3.3x: disabled
2009/03/20 22:23:45 892 s camd 3.5x: disabled
2009/03/20 22:23:45 892 s cs378x: disabled
2009/03/20 22:23:45 892 s newcamd: initialized (fd=8, port=15000, crypted)
2009/03/20 22:23:45 892 s CAID: 1722
2009/03/20 22:23:45 892 s provid #0: 0FFFFF
2009/03/20 22:23:45 892 s newcamd: initialized (fd=9, port=15001, crypted)
2009/03/20 22:23:45 892 s CAID: 1834
2009/03/20 22:23:45 892 s provid #0: 0FFFFF
2009/03/20 22:23:45 892 s radegast: disabled
2009/03/20 22:23:45 892 s resolver thread started
2009/03/20 22:23:45 892 s logger started (pid=895)
2009/03/20 22:23:45 892 s resolver started (pid=896, delay=30 sec)
2009/03/20 22:23:45 892 s reader started (pid=897, device=/dev/tts/1, detect=dsr)
2009/03/20 22:23:45 892 s anti cascading disabled
2009/03/20 22:23:47 897 r02 card detected
2009/03/20 22:23:52 897 r02 ATR: "Hab die Zahl gelöscht, nicht das es die Karten Nummer ist"
2009/03/20 22:23:59 897 r02 card system not supported
2009/03/20 22:23:59 897 r02 card initializing error
Sorry Musicnapper,
hab beim ausführen der mpcs doch vergessen die gbox wieder auszuschalten.
Jetzt scheint der mpcs zu laufen oder ?
danach die mbox gestartet, Bild bleibt aber dunkel,2009/03/21 8:44:53 690 s version=0.9d-gbx-Beta5.3, system=powerpc-dbox2-linux, nice=-15
2009/03/21 8:44:53 690 s max. clients=29, client max. idle=120 sec
2009/03/21 8:44:54 690 s max. logsize=unlimited
2009/03/21 8:44:54 690 s client timeout=5 sec, cache delay=0 msec
2009/03/21 8:44:54 690 s shared memory initialized (size=470684, fd=3)
2009/03/21 8:44:54 690 s auth size=4640
2009/03/21 8:44:54 690 s services reloaded: 0 services freed, 3 services loaded
2009/03/21 8:44:54 690 s userdb reloaded: 0 accounts freed, 1 accounts loaded
2009/03/21 8:44:54 690 s signal handling initialized (type=sysv)
2009/03/21 8:44:54 690 s 2277 service-id's loaded
2009/03/21 8:44:54 690 s monitor: initialized (fd=7, port=8000)
2009/03/21 8:44:54 690 s camd 3.3x: disabled
2009/03/21 8:44:54 690 s camd 3.5x: disabled
2009/03/21 8:44:54 690 s cs378x: disabled
2009/03/21 8:44:54 690 s newcamd: initialized (fd=8, port=15000, crypted)
2009/03/21 8:44:54 690 s CAID: 1722
2009/03/21 8:44:54 690 s provid #0: 0FFFFF
2009/03/21 8:44:54 690 s newcamd: initialized (fd=9, port=15001, crypted)
2009/03/21 8:44:54 690 s CAID: 1834
2009/03/21 8:44:54 690 s provid #0: 0FFFFF
2009/03/21 8:44:54 690 s radegast: disabled
2009/03/21 8:44:54 690 s resolver thread started
2009/03/21 8:44:54 690 s logger started (pid=693)
2009/03/21 8:44:54 690 s resolver started (pid=694, delay=30 sec)
2009/03/21 8:44:54 690 s reader started (pid=695, device=/dev/tts/1, detect=dsr)
2009/03/21 8:44:54 690 s anti cascading disabled
2009/03/21 8:44:56 695 r02 card detected
2009/03/21 8:44:00 695 r02 ATR: gelöscht
2009/03/21 8:44:01 695 r02 type: irdeto, caid: 1722, acs: 3.84
2009/03/21 8:44:01 695 r02 ascii serial: gelöscht, hex serial: gelöscht, hex base: 1A
2009/03/21 8:44:04 695 r02 ready for requests
2009/03/21 8:44:04 695 r02 providers: 2 (FFFFFF,FFFFFF)
2009/03/21 8:44:05 695 r02 provider: 2, id: FFFFFF
2009/03/21 8:44:05 695 r02 chid: 7D21, date: 2009/02/21 - 2009/04/30
2009/03/21 8:44:05 695 r02 chid: 7D22, date: 2009/02/21 - 2009/04/30
2009/03/21 8:44:05 695 r02 chid: 000F, date: 2009/02/21 - 2009/04/30
2009/03/21 8:44:05 695 r02 chid: 7D23, date: 2009/02/21 - 2009/04/30
2009/03/21 8:44:05 695 r02 chid: 03FD, date: 2009/02/21 - 2009/04/30
2009/03/21 8:44:05 695 r02 chid: 7D27, date: 2009/02/21 - 2009/04/30
2009/03/21 8:44:05 695 r02 chid: 03F2, date: 2009/02/21 - 2009/04/30
2009/03/21 8:44:05 695 r02 chid: 04CE, date: 2009/02/21 - 2009/04/30
2009/03/21 8:44:05 695 r02 chid: 05DC, date: 2009/02/21 - 2009/04/30
2009/03/21 8:44:05 695 r02 chid: 03E8, date: 2009/02/21 - 2009/04/30
2009/03/21 8:44:05 695 r02 chid: 00F0, date: 2009/02/21 - 2009/04/30
2009/03/21 8:44:05 695 r02 chid: 0109, date: 2008/01/19 - 2008/01/21
2009/03/21 8:44:05 695 r02 chid: 0064, date: 2008/01/19 - 2008/01/21
2009/03/21 8:44:05 695 r02 chid: 0065, date: 2008/01/19 - 2008/01/21
2009/03/21 8:44:05 695 r02 chid: 03C0, date: 2008/01/19 - 2008/01/21
2009/03/21 8:44:05 695 r02 chid: 0066, date: 2008/01/19 - 2008/01/21
2009/03/21 8:44:05 695 r02 chid: 0067, date: 2008/01/19 - 2008/01/21
2009/03/21 8:44:05 695 r02 chid: 006A, date: 2008/01/19 - 2008/01/21
2009/03/21 8:44:05 695 r02 chid: 006F, date: 2008/01/19 - 2008/01/21
2009/03/21 8:44:05 695 r02 chid: 006C, date: 2008/01/19 - 2008/01/21
2009/03/21 8:44:06 695 r02 chid: 006D, date: 2008/01/19 - 2008/01/21
2009/03/21 8:44:06 695 r02 chid: 0320, date: 2008/01/19 - 2008/01/21
2009/03/21 8:44:06 695 r02 chid: 0322, date: 2008/01/19 - 2008/01/21
2009/03/21 8:44:06 695 r02 chid: 012C, date: 2008/01/19 - 2008/01/21
2009/03/21 8:44:06 695 r02 chid: 00E6, date: 2008/01/19 - 2008/01/21
2009/03/21 8:44:06 695 r02 chid: 012D, date: 2008/01/19 - 2008/01/21
2009/03/21 8:44:06 695 r02 chid: 00E4, date: 2008/01/19 - 2008/01/21
2009/03/21 8:44:06 695 r02 chid: 012E, date: 2008/01/19 - 2008/01/21
2009/03/21 8:44:06 695 r02 chid: 012F, date: 2008/01/19 - 2008/01/21
2009/03/21 8:44:06 695 r02 chid: 00DB, date: 2008/01/19 - 2008/01/21
2009/03/21 8:44:06 695 r02 chid: 0130, date: 2008/01/19 - 2008/01/21
2009/03/21 8:44:06 695 r02 chid: 00DD, date: 2008/01/19 - 2008/01/21
2009/03/21 8:44:06 695 r02 chid: 0131, date: 2008/01/19 - 2008/01/21
2009/03/21 8:44:06 695 r02 chid: 00DE, date: 2008/01/19 - 2008/01/21
2009/03/21 8:44:06 695 r02 chid: 0132, date: 2008/01/19 - 2008/01/21
2009/03/21 8:44:06 695 r02 chid: 00E3, date: 2008/01/19 - 2008/01/21
2009/03/21 8:44:06 695 r02 chid: 0133, date: 2008/01/19 - 2008/01/21
2009/03/21 8:44:06 695 r02 chid: 00E5, date: 2008/01/19 - 2008/01/21
2009/03/21 8:44:06 695 r02 chid: 0134, date: 2008/01/19 - 2008/01/21
2009/03/21 8:44:06 695 r02 chid: 00DF, date: 2008/01/19 - 2008/01/21
2009/03/21 8:44:06 695 r02 chid: 0135, date: 2008/01/19 - 2008/01/21
2009/03/21 8:44:06 695 r02 chid: 00E2, date: 2008/01/19 - 2008/01/21
2009/03/21 8:44:06 695 r02 chid: 0136, date: 2008/01/19 - 2008/01/21
2009/03/21 8:44:06 695 r02 chid: 013A, date: 2008/01/19 - 2008/01/21
2009/03/21 8:44:06 695 r02 chid: 013C, date: 2008/01/19 - 2008/01/21
2009/03/21 8:44:06 695 r02 chid: 013E, date: 2008/01/19 - 2008/01/21
2009/03/21 8:44:06 695 r02 chid: 013B, date: 2008/01/19 - 2008/01/21
2009/03/21 8:44:06 695 r02 chid: 00E8, date: 2008/01/19 - 2008/01/21
2009/03/21 8:44:06 695 r02 chid: 00E9, date: 2008/01/19 - 2008/01/21
2009/03/21 8:44:06 695 r02 chid: 0137, date: 2008/01/19 - 2008/01/21
2009/03/21 8:44:07 695 r02 chid: 0138, date: 2008/01/19 - 2008/01/21
2009/03/21 8:44:07 695 r02 chid: 02CA, date: 2008/01/19 - 2008/01/21
2009/03/21 8:44:07 695 r02 chid: 0139, date: 2008/01/19 - 2008/01/21
2009/03/21 8:44:07 695 r02 chid: 02CB, date: 2008/01/19 - 2008/01/21
2009/03/21 8:44:07 695 r02 chid: 02CE, date: 2008/01/19 - 2008/01/21
2009/03/21 8:44:07 695 r02 chid: 000A, date: 2008/01/19 - 2008/01/21
Hier der Auszug aus der debug.txt
und nochmals Sorry vom dummen USER/var # mbox
[08:40:15] ExYuSAT Team http://www.exyusat.com
[08:40:15] Starting MBOX version 0.4 BETA coded by The_Ripper (29.09.2008)
[08:40:15] This program is for educational & informational purposes only!!
[08:40:15] Donation to project: http://mbox.exyusat.com/donate.htm
[08:40:15] ===> Net Mode <===
[08:40:15] Opened 'ca' device ...
[08:40:15] Opened 'demux' device ...
[08:40:16] Reading cwshare.cfg ...
[08:40:16] Trying to get online,please wait ...
[08:40:16] Natürlich alles gelöscht
[08:40:16] Total 1 UDP port(s) to monitor
[08:40:16] Total 0 TCP port(s) to monitor
[08:40:16] Monitoring port(s): 8010
[08:40:16] Total 2 newcamd server(s) to connect
[08:40:16] Creating ecm parser thread ...OK
[08:40:16] Creating timer thread ...OK
[08:40:16] Creating newcamd worker thread ...OK
[08:40:16] Creating send thread ...OK
[08:40:16] Creating UDP receive thread ...OK
[08:40:16]
[08:40:16] ReReading pmt.tmp
[08:40:16] ================================================== ================
[08:40:16] ECM: CA ID: 0x1702 Nagravision -> CA PID: 0x1744
[08:40:16] ECM: CA ID: 0x1722 Nagravision -> CA PID: 0x1C45
[08:40:16] ECM: CA ID: 0x1837 Nagravision -> CA PID: 0x1A44
[08:40:16] ECM: CA ID: 0x1833 Nagravision -> CA PID: 0x1844
[08:40:16] ECM: CA ID: 0x1834 Nagravision -> CA PID: 0x1C44
[08:40:16] ECM: CA ID: 0x09C4 NDS -> CA PID: 0x1B44
[08:40:16] EMM: CA ID: 0x1801 Nagravision -> CA PID: 0x1501
[08:40:16] EMM: CA ID: 0x1722 Nagravision -> CA PID: 0x1500
[08:40:16] EMM: CA ID: 0x1834 Nagravision -> CA PID: 0x1505
[08:40:16] ================================================== ================
[08:40:16] [newcamd] Trying to connect to newcamd server (127.0.0.1:15000)
[08:40:16] [newcamd] Connected to (127.0.0.1:15000) ...
[08:40:17] [newcamd] Got card with CaID 0x1722 and 1 number(s) of ProvID (127.0.0.1:15000)
[08:40:17] [newcamd] Card: CaID 0x1722 ProvID: 0x0FFFFF (127.0.0.1:15000)
[08:40:17] [newcamd] Changing 0x1722FFFF to 0x17220000 (127.0.0.1:15000)
[08:40:17] [newcamd] Creating newcamd worker thread for (127.0.0.1:15000) ...
OK
[08:40:17] [newcamd] Trying to connect to newcamd server (127.0.0.1:15001)
[08:40:17] [newcamd] Connected to (127.0.0.1:15001) ...
[08:40:17] [newcamd] Got card with CaID 0x1834 and 1 number(s) of ProvID (127.0.0.1:15001)
[08:40:17] [newcamd] Card: CaID 0x1834 ProvID: 0x0FFFFF (127.0.0.1:15001)
[08:40:17] [newcamd] Changing 0x1834FFFF to 0x18340000 (127.0.0.1:15001)
[08:40:17] [newcamd] Creating newcamd worker thread for (127.0.0.1:15001) ...
OK
[08:40:17] ->Hello to peer gelöscht
[08:40:17] Searching CW cache for CaID 0x1722, pid 0x1C45...no CW in cache
[08:40:17] Dropping local ECM , caid:0x1722, ecmpid:0x1C45, cant decode localy
[08:40:17] Searching CW cache for CaID 0x1834, pid 0x1C44...no CW in cache
[08:40:17] Dropping local ECM , caid:0x1834, ecmpid:0x1C44, cant decode localy
[08:40:18] Searching CW cache for CaID 0x1722, pid 0x1C45...no CW in cache
[08:40:18] Dropping local ECM , caid:0x1722, ecmpid:0x1C45, cant decode localy
[08:40:18] Searching CW cache for CaID 0x1834, pid 0x1C44...no CW in cache
[08:40:18] Dropping local ECM , caid:0x1834, ecmpid:0x1C44, cant decode localy
[08:40:18] <-Hello from peer gelöscht
[08:40:19] Searching CW cache for CaID 0x1722, pid 0x1C97...no CW in cache
[08:40:19] Dropping ECM from gelöscht, caid:0x1722, ecmpid:0x1C97, cant decode localy
[08:40:19] Searching CW cache for CaID 0x1834, pid 0x1C96...no CW in cache
[08:40:19] Dropping ECM from gelöscht, caid:0x1834, ecmpid:0x1C96, cant decode localy
[08:40:19] Searching CW cache for CaID 0x1722, pid 0x1C45...ECM allready in cache
[08:40:19] Searching CW cache for CaID 0x1834, pid 0x1C44...ECM allready in cache
etc
..
cu
Derrick
auch ok ,hast Du MPCS online installiert ?
Ja und auch die mbox
Kennt jemand das Abfrage-Kommando, um sämtliche Tiers aus den neuen Nagravision Karten von Premiere zu extrahieren?
Die neue CCcam Version kann das ja mittlerweile, aber das Kommendo dafür ist bisher nicht weiter bekannt.
Berechtigungen
