DBOX2 Mastercrd und NDS V13 funzt nicht -:(

[hansie45]

die Karte wird nicht erkannt im Log, da hilft auch kein Webinterface.
mal auf 6MHZ starten oder 500
Der Karte macht es kurzzeitig nichts, andere fahren die dauerhaft auf 6MHZ.
Und dann den Log hier rein bitte.

[heisse_fee]

Einen wunderschönen "Guten Morgen" alle zusammen.

So... dann wollen wir mal weiterschauen. (Wäre ja schön, wenn es klappen würde)

Habe noch mal überlegt. Also der Kartenleser ist von ca. 1999. Also schon sehr alt.

Folgendes nun geändert

<mhz>600</mhz>

Mastercrd junior auf Modus 0 = 6,00 Mhz

Und nun der/die/das Log:

BusyBox v1.7.2 (2008-10-30 00:59:12 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.

/var # killall -9 newcs
/var # newcs
This is NewCS 1.62 - the New ****Server by the Butter-team..
Compiled on Aug 27 2008 at 16:49:31
Reading Config file from /var/tuxbox/config/newcs.xml
TCP-log password is disabled!
level: normal
type: init
output: console,tcp
logger config: level 1 type 3 output 5
Console log options: level 1 type 3
TCP log options: level 1 type 3
[ 10:17:10 ] [ Box detect ] Box type 4 (Dbox2)
[ 10:17:10 ] [ Config ] Option <blockc0> for device 0 (phoenix) not present, defaulting to NO
[ 10:17:10 ] [ Config ] Value in <ipk> for device 0 (phoenix) is INVALID, skipping...
[ 10:17:10 ] [ Config ] Value in <ucpk> for device 0 (phoenix) is INVALID, skipping...
[ 10:17:10 ] [ Config ] /dev/tts/0 ECM priority: round
[ 10:17:10 ] [ httpd ] httpd-user: Admin, password: 0815, accesslevel: admin
[ 10:17:10 ] [ EMM Cache ] Initialising dynamic Cache
[ 10:17:10 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 9544
[ 10:17:10 ] [ Loader ] Starting Telnet on port 10001
[ 10:17:10 ] [ Loader ] Started HTTP-server on port: 8088
[ 10:17:10 ] [ Loader ] Reader type 2 on node /dev/tts/0
[ 10:17:10 ] [ Phoenix ] Opening device /dev/tts/0
[ 10:17:10 ] [ Phoenix ] Setting Parity to: EVEN
[ 10:17:10 ] [ Phoenix ] Setting 2 Stop bits on node /dev/tts/0
[ 10:17:10 ] [ Phoenix ] Setting Baud to custom 16129
[ 10:17:10 ] [ Phoenix ] Normal RESET on node /dev/tts/0
[ 10:17:12 ] [ Loader ] Unknown ****
[ 10:17:12 ] [ Loader ] Trying Irdeto (T=14)
[ 10:17:12 ] [ Loader ] Reader type 2 on node /dev/tts/0
[ 10:17:12 ] [ Phoenix ] Opening device /dev/tts/0
[ 10:17:12 ] [ Phoenix ] Setting Parity to: EVEN
[ 10:17:12 ] [ Phoenix ] Setting 2 Stop bits on node /dev/tts/0
[ 10:17:12 ] [ Phoenix ] Setting Baud to standard 9600
[ 10:17:12 ] [ Phoenix ] Normal RESET on node /dev/tts/0
[ 10:17:14 ] [ Loader ] Unknown ****
[ 10:17:14 ] [ NewCS ] Ready to GO! :)
/var #

[heisse_fee]

<newCSconfig>
	<readers name="Phoenix">
		<device>
			<name>phoenix</name>
			<type>phoenix</type>
			<mhz>450</mhz>
			<node>/dev/tts/0</node>
			<parity>even</parity>
			<reset>hard</reset>
			<export>Yes</export>
			<enabled>Yes</enabled>
			<blocksa>No</blocksa>
			<blockua>No</blockua>
			<blockga>No</blockga>
			<crypto-special>No</crypto-special>
			<boxkey>00000000</boxkey>
			<irdeto-camkey>0000000000000000</irdeto-camkey>
			<irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>
			<crypto-special>No</crypto-special>
			<ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>
			<ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>
			<PTShandshake>No</PTShandshake>
			<****detect>yes</****detect>
			<newcamd_port>34001</newcamd_port>
			<autosid>Yes</autosid>
			<Seca-PPV>no</Seca-PPV>
			<priority>round</priority>
		</device>
	</readers>
	<cache>
			<emm>20</emm>
			<ecm>-1</ecm>
	</cache>
	<debug>
			<mode>simple</mode>
			<level>normal</level>
			<type>init</type>
			<output>console,tcp</output>
			<console_options>normal,init</console_options>
			<tcp_port>10001</tcp_port>
			<tcp_options>normal,init</tcp_options>
	</debug>
	<newcamdserver>
			<enabled>1</enabled>
			<name>newcs</name>
			<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
			<user><status>access</status>
				<name>newcs1</name>
				<password>newcs</password>
				<hostname>192.168.1.8</hostname>
				<au>on</au>
				<sidoverride>off</sidoverride>
				<spider>off</spider>
                                <rate>2</rate>
			</user>
	</newcamdserver>
	<httpd>
<server>
<port>8088</port>
<enabled>yes</enabled>
</server>
<user>
<name>Admin</name>
<password>0815</password>
<accesslevel>admin</accesslevel>
</user></httpd></newCSconfig>

BusyBox v1.7.2 (2008-10-30 00:59:12 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.

/var # killall -9 newcs
/var # newcs
This is NewCS 1.62 - the New ****Server by the Butter-team..
Compiled on Aug 27 2008 at 16:49:31
Reading Config file from /var/tuxbox/config/newcs.xml
TCP-log password is disabled!
level: normal
type: init
output: console,tcp
logger config: level 1 type 3 output 5
Console log options: level 1 type 3
TCP log options: level 1 type 3
[ 11:18:00 ] [ Box detect ] Box type 4 (Dbox2)
[ 11:18:01 ] [ Config ] Option <blockc0> for device 0 (phoenix) not present, defaulting to NO
[ 11:18:01 ] [ Config ] Value in <ipk> for device 0 (phoenix) is INVALID, skipping...
[ 11:18:01 ] [ Config ] Value in <ucpk> for device 0 (phoenix) is INVALID, skipping...
[ 11:18:01 ] [ Config ] /dev/tts/0 ECM priority: round
[ 11:18:01 ] [ httpd ] httpd-user: Admin, password: 0815, accesslevel: admin
[ 11:18:01 ] [ EMM Cache ] Initialising dynamic Cache
[ 11:18:01 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 2217
[ 11:18:01 ] [ Loader ] Starting Telnet on port 10001
[ 11:18:01 ] [ Loader ] Started HTTP-server on port: 8088
[ 11:18:01 ] [ Loader ] Reader type 2 on node /dev/tts/0
[ 11:18:01 ] [ Phoenix ] Opening device /dev/tts/0
[ 11:18:01 ] [ Phoenix ] Setting Parity to: EVEN
[ 11:18:01 ] [ Phoenix ] Setting 2 Stop bits on node /dev/tts/0
[ 11:18:01 ] [ Phoenix ] Setting Baud to custom 12096
[ 11:18:01 ] [ Phoenix ] Normal RESET on node /dev/tts/0
[ 11:18:03 ] [ Loader ] Reset failed ...
[ 11:18:03 ] [ NewCS ] Ready to GO! :)
/var # [ 11:18:03 ] [ Loader ] Reader type 2 on node /dev/tts/0
[ 11:18:03 ] [ Phoenix ] Opening device /dev/tts/0
[ 11:18:03 ] [ Phoenix ] Setting Parity to: EVEN
[ 11:18:03 ] [ Phoenix ] Setting 2 Stop bits on node /dev/tts/0
[ 11:18:03 ] [ Phoenix ] Setting Baud to custom 12096
[ 11:18:03 ] [ Phoenix ] Normal RESET on node /dev/tts/0
[ 11:18:05 ] [ Loader ] Reset failed ...
[ 11:18:05 ] [ Loader ] Reader type 2 on node /dev/tts/0
[ 11:18:05 ] [ Phoenix ] Opening device /dev/tts/0
[ 11:18:05 ] [ Phoenix ] Setting Parity to: EVEN
[ 11:18:05 ] [ Phoenix ] Setting 2 Stop bits on node /dev/tts/0
[ 11:18:05 ] [ Phoenix ] Setting Baud to custom 12096
[ 11:18:05 ] [ Phoenix ] Normal RESET on node /dev/tts/0
[ 11:18:06 ] [ Loader ] Reset failed ...
[ 11:18:06 ] [ Loader ] Reader type 2 on node /dev/tts/0
[ 11:18:06 ] [ Phoenix ] Opening device /dev/tts/0
[ 11:18:06 ] [ Phoenix ] Setting Parity to: EVEN
[ 11:18:06 ] [ Phoenix ] Setting 2 Stop bits on node /dev/tts/0
[ 11:18:06 ] [ Phoenix ] Setting Baud to custom 12096
[ 11:18:06 ] [ Phoenix ] Normal RESET on node /dev/tts/0
[ 11:18:08 ] [ Loader ] Unknown ****
[ 11:18:08 ] [ Loader ] Trying Irdeto (T=14)
[ 11:18:08 ] [ Loader ] Reader type 2 on node /dev/tts/0
[ 11:18:08 ] [ Phoenix ] Opening device /dev/tts/0
[ 11:18:08 ] [ Phoenix ] Setting Parity to: EVEN
[ 11:18:08 ] [ Phoenix ] Setting 2 Stop bits on node /dev/tts/0
[ 11:18:08 ] [ Phoenix ] Setting Baud to custom 7200
[ 11:18:08 ] [ Phoenix ] Normal RESET on node /dev/tts/0
[ 11:18:09 ] [ Loader ] Unknown ****