DBOX2 Mastercrd und NDS V13 funzt nicht -:(

**heisse_fee** · 22.11.08

Einen wunderschönen "Guten Morgen" alle zusammen.

So... dann wollen wir mal weiterschauen. (Wäre ja schön, wenn es klappen würde)

Habe noch mal überlegt. Also der Kartenleser ist von ca. 1999. Also schon sehr alt.

Folgendes nun geändert

Code:

<mhz>600</mhz>

Mastercrd junior auf Modus 0 = 6,00 Mhz

Und nun der/die/das Log:

Code:

BusyBox v1.7.2 (2008-10-30 00:59:12 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.

/var # killall -9 newcs
/var # newcs
This is NewCS 1.62 - the New ****Server by the Butter-team..
Compiled on Aug 27 2008 at 16:49:31
Reading Config file from /var/tuxbox/config/newcs.xml
TCP-log password is disabled!
level: normal
type: init
output: console,tcp
logger config: level 1 type 3 output 5
Console log options: level 1 type 3
TCP log options: level 1 type 3
[ 10:17:10 ] [ Box detect ] Box type 4 (Dbox2)
[ 10:17:10 ] [ Config ] Option <blockc0> for device 0 (phoenix) not present, defaulting to NO
[ 10:17:10 ] [ Config ] Value in <ipk> for device 0 (phoenix) is INVALID, skipping...
[ 10:17:10 ] [ Config ] Value in <ucpk> for device 0 (phoenix) is INVALID, skipping...
[ 10:17:10 ] [ Config ] /dev/tts/0 ECM priority: round
[ 10:17:10 ] [ httpd ] httpd-user: Admin, password: 0815, accesslevel: admin
[ 10:17:10 ] [ EMM Cache ] Initialising dynamic Cache
[ 10:17:10 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 9544
[ 10:17:10 ] [ Loader ] Starting Telnet on port 10001
[ 10:17:10 ] [ Loader ] Started HTTP-server on port: 8088
[ 10:17:10 ] [ Loader ] Reader type 2 on node /dev/tts/0
[ 10:17:10 ] [ Phoenix ] Opening device /dev/tts/0
[ 10:17:10 ] [ Phoenix ] Setting Parity to: EVEN
[ 10:17:10 ] [ Phoenix ] Setting 2 Stop bits on node /dev/tts/0
[ 10:17:10 ] [ Phoenix ] Setting Baud to custom 16129
[ 10:17:10 ] [ Phoenix ] Normal RESET on node /dev/tts/0
[ 10:17:12 ] [ Loader ] Unknown ****
[ 10:17:12 ] [ Loader ] Trying Irdeto (T=14)
[ 10:17:12 ] [ Loader ] Reader type 2 on node /dev/tts/0
[ 10:17:12 ] [ Phoenix ] Opening device /dev/tts/0
[ 10:17:12 ] [ Phoenix ] Setting Parity to: EVEN
[ 10:17:12 ] [ Phoenix ] Setting 2 Stop bits on node /dev/tts/0
[ 10:17:12 ] [ Phoenix ] Setting Baud to standard 9600
[ 10:17:12 ] [ Phoenix ] Normal RESET on node /dev/tts/0
[ 10:17:14 ] [ Loader ] Unknown ****
[ 10:17:14 ] [ NewCS ] Ready to GO! :)
/var #

hansie45 · 22.11.08

Binderror, newcs wieder doppelt gestartet und Karte wird nicht erkannt. Normal reset scheint damit nicht zu laufen, deshalb der Hinweis das umzustellen.
Mit Parity odd probieren wäre auch noch ne Lösung

**heisse_fee** · 22.11.08

Mmmhhh ....

Alles durchprobiert.

Reset umgestellt (Steht im Log aber immer Normal reset. Auch wenn ich auf "hard" stelle)

Parity umgestellt

Es kommt immer "unknown ****"

hansie45 · 22.11.08

<name>Phoenix Interface</name>
<type>phoenix</type>
<mhz>450</mhz>
<node>/dev/tts/0</node>
<parity>odd</parity>
<reset>inverse</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>


<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</ipk>
<ucpk>00000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<****detect>yes</****detect>
<newcamd_port>34001</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
Versuch das mal bitte, den Part Device genau so übernehmen, und Log posten,thx
Wenn das auch nicht hilft, in welchem Modus steht der Reader???
achja, hast Du auch das richtige Kabel für den ****reader benutzt? welches Netzteil hängt dran?
Was zeigt die LCD Anzeige des Readers?

**heisse_fee** · 22.11.08

Der Reader steht auf "0" -> 6,00 MHz

Code:

BusyBox v1.7.2 (2008-10-30 00:59:12 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.

/var # killall -9 newcs
/var # newcs
This is NewCS 1.62 - the New ****Server by the Butter-team..
Compiled on Aug 27 2008 at 16:49:31
Reading Config file from /var/tuxbox/config/newcs.xml
[ 10:41:11 ] [ Box detect ] Box type 4 (Dbox2)
[ 10:41:11 ] [ Config ] Option <newcamd_port> for device 0 (Phoenix Interface) not present, defaulti
ng to 15050
[ 10:41:11 ] [ Config ] Option <blockc0> for device 0 (Phoenix Interface) not present, defaulting to
 NO
[ 10:41:11 ] [ Config ] Option <Seca-PPV> for device 0 (Phoenix Interface) not present, defaulting t
o NO
[ 10:41:11 ] [ Config ] Value in <ipk> for device 0 (Phoenix Interface) is INVALID, skipping...
[ 10:41:11 ] [ Config ] Value in <ucpk> for device 0 (Phoenix Interface) is INVALID, skipping...
[ 10:41:11 ] [ Config ] Option <cache> not present, defaulting EMM: 20, ECM: Dynamic
[ NewCS ] Process ID is: 20515
[ 10:41:13 ] [ NewCS ] Ready to GO! :)
/var #

Netzteil ist ein Universal-Netzteil und steht auf 12 V.

Tcha, das mit dem Kabel ist schon so eine Frage. Wenn ich das wüsste. Hatte hier nur noch ein Kabel rumfliegen, dass Buchse und Stecker hat.

Wie muss denn genau die Belegung sein, damit ich das mal durchmessen kann

hansie45 · 22.11.08

Reader bitte auf 1= 3,57MHZ stellen und nochmal probieren.
wie viel Volt bekommt der Reader?
Mit den jetzigen Einstellungen wird der Reader gar nicht mehr erkannt, grml

Also alles nochmal zurück und Reader auf 3,57MHZ und die CFG bitte mit Logausgabe:

<device>
<name>phoenix</name>
<type>phoenix</type>
<mhz>450</mhz>
<node>/dev/tts/0</node>
<parity>even</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<crypto-special>No</crypto-special>
<boxkey>00000000</boxkey>
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</ipk>
<ucpk>00000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<****detect>yes</****detect>
<newcamd_port>34001</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<priority>round</priority>
</device>

**heisse_fee** · 22.11.08

Code:

BusyBox v1.7.2 (2008-10-30 00:59:12 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.

/var # killall -9 newcs
/var # newcs
This is NewCS 1.62 - the New ****Server by the Butter-team..
Compiled on Aug 27 2008 at 16:49:31
Reading Config file from /var/tuxbox/config/newcs.xml
[ 10:47:11 ] [ Box detect ] Box type 4 (Dbox2)
[ 10:47:11 ] [ Config ] Option <blockc0> for device 0 (phoenix) not present, defaulting to NO
[ 10:47:11 ] [ Config ] Value in <ipk> for device 0 (phoenix) is INVALID, skipping...
[ 10:47:11 ] [ Config ] Value in <ucpk> for device 0 (phoenix) is INVALID, skipping...
[ 10:47:11 ] [ Config ] /dev/tts/0 ECM priority: round
[ 10:47:11 ] [ Config ] Option <cache> not present, defaulting EMM: 20, ECM: Dynamic
[ NewCS ] Process ID is: 20534
[ 10:47:13 ] [ NewCS ] Ready to GO! :)
/var #

hansie45 · 22.11.08

mehr kommt da nicht?

Mir fehlt das hier, das muss kommen, am besten Box mal reboot komplett:
[ 10:17:10 ] [ Phoenix ] Opening device /dev/tts/0
[ 10:17:10 ] [ Phoenix ] Setting Parity to: EVEN
[ 10:17:10 ] [ Phoenix ] Setting 2 Stop bits on node /dev/tts/0

Der Reader MUSS auf 3,57MHZ stehen, alles andere kann man später justieren, wenn die KArte mal erkannt wird. 6MHZ ist auf jeden Fall falsch.
Die Frage nach wieviel Volt der Reader bekommt und was auf dem LCD steht, fehlt mir noch, um helfen zu können.

**heisse_fee** · 22.11.08

Ne, mehr kommt da nicht.

7-Segment-Anzeige zeigt "1"
und bekommt 12 V

Code:

<newCSconfig>
	<readers name="Phoenix">
<device>
<name>phoenix</name>
<type>phoenix</type>
<mhz>450</mhz>
<node>/dev/tts/0</node>
<parity>even</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<crypto-special>No</crypto-special>
<boxkey>00000000</boxkey>
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</ipk>
<ucpk>00000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<****detect>yes</****detect>
<newcamd_port>34001</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<priority>round</priority>
</device>

Box habe ich neu gestartet

Code:

BusyBox v1.7.2 (2008-10-30 00:59:12 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.

/var # killall -9 newcs
/var # newcs
This is NewCS 1.62 - the New ****Server by the Butter-team..
Compiled on Aug 27 2008 at 16:49:31
Reading Config file from /var/tuxbox/config/newcs.xml
[ 10:50:58 ] [ Box detect ] Box type 4 (Dbox2)
[ 10:50:58 ] [ Config ] Option <blockc0> for device 0 (phoenix) not present, defaulting to NO
[ 10:50:58 ] [ Config ] Value in <ipk> for device 0 (phoenix) is INVALID, skipping...
[ 10:50:58 ] [ Config ] Value in <ucpk> for device 0 (phoenix) is INVALID, skipping...
[ 10:50:58 ] [ Config ] /dev/tts/0 ECM priority: round
[ 10:50:58 ] [ Config ] Option <cache> not present, defaulting EMM: 20, ECM: Dynamic
[ NewCS ] Process ID is: 521
[ 10:51:00 ] [ NewCS ] Ready to GO! :)
/var #

hansie45 · 22.11.08

Kein ****reader erkannt.
Ist denn der Mode 1 auch wirklich 3,57MHZ?
Ich kenne das Gerät nicht, deshalb frag ich lieber :)
Sonst nimmt halt nochmal die erste NewCS CFG, mit dem der Reader ja zumindest erkannt wurde.
Achja 12 Volt ist "etwas" heftig, wie gepostet betreiben andere den mit 4,5-6Volt
Was Du noch probieren kannst ist eine ältere NewCS Version, 1.60 oder 1.20

**heisse_fee** · 22.11.08

Code:

<newCSconfig>
	<readers name="Phoenix">
		<device>
			<name>phoenix</name>
			<type>phoenix</type>
			<mhz>450</mhz>
			<node>/dev/tts/0</node>
			<parity>even</parity>
			<reset>hard</reset>
			<export>Yes</export>
			<enabled>Yes</enabled>
			<blocksa>No</blocksa>
			<blockua>No</blockua>
			<blockga>No</blockga>
			<crypto-special>No</crypto-special>
			<boxkey>00000000</boxkey>
			<irdeto-camkey>0000000000000000</irdeto-camkey>
			<irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>
			<crypto-special>No</crypto-special>
			<ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>
			<ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>
			<PTShandshake>No</PTShandshake>
			<****detect>yes</****detect>
			<newcamd_port>34001</newcamd_port>
			<autosid>Yes</autosid>
			<Seca-PPV>no</Seca-PPV>
			<priority>round</priority>
		</device>
	</readers>
	<cache>
			<emm>20</emm>
			<ecm>-1</ecm>
	</cache>
	<debug>
			<mode>simple</mode>
			<level>normal</level>
			<type>init</type>
			<output>console,tcp</output>
			<console_options>normal,init</console_options>
			<tcp_port>10001</tcp_port>
			<tcp_options>normal,init</tcp_options>
	</debug>
	<newcamdserver>
			<enabled>1</enabled>
			<name>newcs</name>
			<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
			<user><status>access</status>
				<name>newcs1</name>
				<password>newcs</password>
				<hostname>192.168.1.8</hostname>
				<au>on</au>
				<sidoverride>off</sidoverride>
				<spider>off</spider>
                                <rate>2</rate>
			</user>
	</newcamdserver>
	<httpd>
<server>
<port>8088</port>
<enabled>yes</enabled>
</server>
<user>
<name>Admin</name>
<password>0815</password>
<accesslevel>admin</accesslevel>
</user></httpd></newCSconfig>

Code:

BusyBox v1.7.2 (2008-10-30 00:59:12 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.

/var # killall -9 newcs
/var # newcs
This is NewCS 1.62 - the New ****Server by the Butter-team..
Compiled on Aug 27 2008 at 16:49:31
Reading Config file from /var/tuxbox/config/newcs.xml
TCP-log password is disabled!
level: normal
type: init
output: console,tcp
logger config: level 1 type 3 output 5
Console log options: level 1 type 3
TCP log options: level 1 type 3
[ 11:18:00 ] [ Box detect ] Box type 4 (Dbox2)
[ 11:18:01 ] [ Config ] Option <blockc0> for device 0 (phoenix) not present, defaulting to NO
[ 11:18:01 ] [ Config ] Value in <ipk> for device 0 (phoenix) is INVALID, skipping...
[ 11:18:01 ] [ Config ] Value in <ucpk> for device 0 (phoenix) is INVALID, skipping...
[ 11:18:01 ] [ Config ] /dev/tts/0 ECM priority: round
[ 11:18:01 ] [ httpd ] httpd-user: Admin, password: 0815, accesslevel: admin
[ 11:18:01 ] [ EMM Cache ] Initialising dynamic Cache
[ 11:18:01 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 2217
[ 11:18:01 ] [ Loader ] Starting Telnet on port 10001
[ 11:18:01 ] [ Loader ] Started HTTP-server on port: 8088
[ 11:18:01 ] [ Loader ] Reader type 2 on node /dev/tts/0
[ 11:18:01 ] [ Phoenix ] Opening device /dev/tts/0
[ 11:18:01 ] [ Phoenix ] Setting Parity to: EVEN
[ 11:18:01 ] [ Phoenix ] Setting 2 Stop bits on node /dev/tts/0
[ 11:18:01 ] [ Phoenix ] Setting Baud to custom 12096
[ 11:18:01 ] [ Phoenix ] Normal RESET on node /dev/tts/0
[ 11:18:03 ] [ Loader ] Reset failed ...
[ 11:18:03 ] [ NewCS ] Ready to GO! :)
/var # [ 11:18:03 ] [ Loader ] Reader type 2 on node /dev/tts/0
[ 11:18:03 ] [ Phoenix ] Opening device /dev/tts/0
[ 11:18:03 ] [ Phoenix ] Setting Parity to: EVEN
[ 11:18:03 ] [ Phoenix ] Setting 2 Stop bits on node /dev/tts/0
[ 11:18:03 ] [ Phoenix ] Setting Baud to custom 12096
[ 11:18:03 ] [ Phoenix ] Normal RESET on node /dev/tts/0
[ 11:18:05 ] [ Loader ] Reset failed ...
[ 11:18:05 ] [ Loader ] Reader type 2 on node /dev/tts/0
[ 11:18:05 ] [ Phoenix ] Opening device /dev/tts/0
[ 11:18:05 ] [ Phoenix ] Setting Parity to: EVEN
[ 11:18:05 ] [ Phoenix ] Setting 2 Stop bits on node /dev/tts/0
[ 11:18:05 ] [ Phoenix ] Setting Baud to custom 12096
[ 11:18:05 ] [ Phoenix ] Normal RESET on node /dev/tts/0
[ 11:18:06 ] [ Loader ] Reset failed ...
[ 11:18:06 ] [ Loader ] Reader type 2 on node /dev/tts/0
[ 11:18:06 ] [ Phoenix ] Opening device /dev/tts/0
[ 11:18:06 ] [ Phoenix ] Setting Parity to: EVEN
[ 11:18:06 ] [ Phoenix ] Setting 2 Stop bits on node /dev/tts/0
[ 11:18:06 ] [ Phoenix ] Setting Baud to custom 12096
[ 11:18:06 ] [ Phoenix ] Normal RESET on node /dev/tts/0
[ 11:18:08 ] [ Loader ] Unknown ****
[ 11:18:08 ] [ Loader ] Trying Irdeto (T=14)
[ 11:18:08 ] [ Loader ] Reader type 2 on node /dev/tts/0
[ 11:18:08 ] [ Phoenix ] Opening device /dev/tts/0
[ 11:18:08 ] [ Phoenix ] Setting Parity to: EVEN
[ 11:18:08 ] [ Phoenix ] Setting 2 Stop bits on node /dev/tts/0
[ 11:18:08 ] [ Phoenix ] Setting Baud to custom 7200
[ 11:18:08 ] [ Phoenix ] Normal RESET on node /dev/tts/0
[ 11:18:09 ] [ Loader ] Unknown ****

hansie45 · 22.11.08

OK, jetzt bitte nochmal das Ganze mit 3,57MHZ und Parity auf odd.

Wenns dann au net geht, hast Du noch eine andere Karte (egal ob gültig oder nicht zum testen?

hansie45 · 22.11.08

hast Du mal ne ältere NewCS probiert wie angeraten?
Weil oben das Log ist ja noch 1.62, mal 1.60 oder ganz alt 1.20 testen

**heisse_fee** · 22.11.08

Habe noch mal zwei alte Prem. Karten ausprobiert. Auch "unknown ****".

Scheint wohl der Reader hinüber zu sein ...

**heisse_fee** · 22.11.08

Noch eine Frage/Möglichkeit

Ich habe die Prem-Karte mit einem Humax HD 1000 bekommen. In diesen auch die Karte freigeschaltet.

Hat nun eventuell ein Pairing stattgefunden? Und deshalb erkennt der Reader die Karte nicht?

Letzte Themen:

Thema: DBOX2 Mastercrd und NDS V13 funzt nicht -:(

Themen-Optionen

Thema durchsuchen

Anzeige

Ähnliche Themen

Mastercrd 2 an dbox2

CS mit Dbox2 und mastercrd!Hilfee

Berechtigungen