Hallo Leute,
so langsam bin ich am verzweifeln. Bekomme meine originale Pre. Karte V13 einfach nicht zum Laufen.
Sagem DBox2
µMC: V1.09
Keyweltimage Okober
scam und CCcam aus Sorglospaket und alles nach Anleitung installiert
Hier meine newcs.xml:
und meine CCcam.cfg:Code:<newCSconfig> <readers name="DBox2"> <device> <name>Multicam</name> <type>dbox</type> <mhz>357</mhz> <node>/dev/tts/1</node> <parity>odd</parity> <reset>hard</reset> <export>Yes</export> <enabled>Yes</enabled> <blocksa>No</blocksa> <blockua>No</blockua> <blockga>No</blockga> <boxkey>00000000</boxkey> <irdeto-camkey>0000000000000000</irdeto-camkey> <irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data> <crypto-special>No</crypto-special> <ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk> <ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk> <PTShandshake>No</PTShandshake> <****detect>yes</****detect> <newcamd_port>34001</newcamd_port> <autosid>Yes</autosid> <Seca-PPV>no</Seca-PPV> <priority>round</priority> </device> </readers> <cache> <emm>20</emm> <ecm>-1</ecm> </cache> <debug> <mode>simple</mode> <level>normal</level> <type>init</type> <output>console,tcp</output> <console_options>normal,init</console_options> <tcp_port>10001</tcp_port> <tcp_options>normal,init</tcp_options> </debug> <newcamdserver> <enabled>Yes</enabled> <name>newcs</name> <deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey> <user><status>access</status> <name>newcs1</name> <password>newcs</password> <hostname>192.168.1.8</hostname> <au>on</au> <sidoverride>off</sidoverride> <spider>off</spider> <rate>2</rate> </user> </newcamdserver> <httpd> <server> <port>8088</port> <enabled>yes</enabled> </server> <user> <name>Admin</name> <password>0815</password> <accesslevel>admin</accesslevel> </user></httpd></newCSconfig>
Und nun der Log, den ich in Telnet angezeigt bekomme. Die Karte steckt zu diesem Zeitpunkt noch nicht im Slot2.Code:N: 192.168.1.8 34001 newcs1 newcs 01 02 03 04 05 06 07 08 09 10 11 12 13 14 SERIAL READER : /dev/tts/1 SMART**** CLOCK FREQUENCY: /dev/tts/1 3570000
Das Ganze geht dann immer so weiter ....Code:have fun with KEYWELT on your Sagem D-BOX2 - Kernel 2.4.36.6-dbox2 (02:19:46)... dbox login: root BusyBox v1.7.2 (2008-10-30 00:59:12 CET) built-in shell (ash) Enter 'help' for a list of built-in commands. /var # killall -9 newcs /var # newcs This is NewCS 1.62 - the New ****Server by the Butter-team.. Compiled on Aug 27 2008 at 16:49:31 Reading Config file from /var/tuxbox/config/newcs.xml TCP-log password is disabled! level: normal type: init output: console,tcp logger config: level 1 type 3 output 5 Console log options: level 1 type 3 TCP log options: level 1 type 3 [ 02:20:14 ] [ Box detect ] Box type 4 (Dbox2) [ 02:20:14 ] [ Config ] Option <blockc0> for device 0 (Multicam) not present, defaulting to N [ 02:20:14 ] [ Config ] Value in <ipk> for device 0 (Multicam) is INVALID, skipping... [ 02:20:14 ] [ Config ] Value in <ucpk> for device 0 (Multicam) is INVALID, skipping... [ 02:20:14 ] [ Config ] /dev/tts/1 ECM priority: round [ 02:20:14 ] [ httpd ] httpd-user: Admin, password: 0815, accesslevel: admin [ 02:20:14 ] [ EMM Cache ] Initialising dynamic Cache [ 02:20:14 ] [ ECM Cache ] Initialising dynamic Cache [ NewCS ] Process ID is: 515 [ 02:20:15 ] [ Loader ] Starting Telnet on port 10001 [ 02:20:15 ] [ Loader ] Started HTTP-server on port: 8088 [ 02:20:15 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 02:20:15 ] [ Dbox ] Opening device /dev/tts/1 [ 02:20:16 ] [ Loader ] Reset failed ... [ 02:20:16 ] [ Loader ] Starting Newcamd Server on port 34001 [ 02:20:16 ] [ NewCS ] Ready to GO! :) /var # [ 02:20:16 ] [ Newcamd ] Newcamd thread Server started on port 34001 [ 02:20:16 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 02:20:16 ] [ Dbox ] Opening device /dev/tts/1 [ 02:20:17 ] [ Loader ] Reset failed ... [ 02:20:17 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 02:20:17 ] [ Dbox ] Opening device /dev/tts/1 [ 02:20:18 ] [ Loader ] Reset failed ... [ 02:20:18 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 02:20:18 ] [ Dbox ] Opening device /dev/tts/1 [ 02:20:19 ] [ Loader ] Reset failed ... [ 02:20:19 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 02:20:19 ] [ Dbox ] Opening device /dev/tts/1 [ 02:20:20 ] [ Loader ] Reset failed ... [ 02:20:20 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 02:20:20 ] [ Dbox ] Opening device /dev/tts/1 [ 02:20:21 ] [ Loader ] Reset failed ... [ 02:20:21 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 02:20:21 ] [ Dbox ] Opening device /dev/tts/1 [ 02:20:22 ] [ Loader ] Reset failed ... [ 02:20:22 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 02:20:22 ] [ Dbox ] Opening device /dev/tts/1 [ 02:20:23 ] [ Loader ] Reset failed ...
Ein [ 02:20:16 ] [ NewCS ] Ready to GO! :) ist ja zu sehen
Weiß jemand vielleicht einen Rat?
