Hallo,
ich habe das gleiche Problem, wie es user CEL hatte,
und komme mit seiner und der Lösung von nooby 7 auch nicht weiter, immer der gleiche Ärger.

Folgendes:
Ich habe 2 Dboxen, eine als Server mit Multicam (GLJ Image) Nokia und eine Clientbox mit Sporster auch Nokia .

So auf der Serverbox läuft also die 3.684b .

Wenn auf der Client auch die 3.684 läuft, geht ****sharing problemlos.

Allerdings würde ich auch gern den Orf (Cryptoworks) sehen und das bringe ich nicht hin, jetzt war also meine Idee ****sharing auf der Client mit der Mgcamd zu realisieren, da damit ja der Orf geht! Doch leider bringe ich kein Premiere hin, das Bild bleibt immer dunkel, habe schon etliche Mgcamd von 1,29 über 1.30 und 1.31 probiert, aber der Premiere bleibt immer dunkel!
Switche ich mit dem gleichen CAmd.servers file auf meine Camd 3.684 auf der Box, so geht Premiere problemlos, nur eben nicht der von mir gewünschte Orf und jedesmal camd neustarten ist mir ein wenig zu lästig!

Ich hänge gleich vorab meine Configs an, also es läuft die reine camd 3.684b zum sharen und mit dieses Config:

Code:
# UDP Port
Port=12345

# OnScreenDisplay : 1-ja, 0-nein, läuft nur unter Neutrino
Osd=1

# Debug modus: 0-keine Ausgaben, 1-ohne Verbindungsinformationen, 2 - mit Verbindungsinformationen
Debug=2

# Descrambler modus(nur für dbox2): 0 - CA, 1-GTX
Descrambler=0

#Reset eNx bei jedem Zappen(nur für dbox2 mit Descrambler=1): 1-ja, 0-nein
Reset_ENX=1

# Cascading modus(IN-inkommende Pakete, OUT- ausgehende : 1-ja, 0-nein)
Cascading_IN=0
Cascading_OUT=0

# Slotverwaltung : 1-ja, 0-nein

Slot0_Start=1
Slot1_Start=1
Slot2_Start=0
Slot3_Start=1

Slot0_AU_G=1
Slot0_AU_S=1
Slot0_AU_U=1

Slot1_AU_G=1
Slot1_AU_S=1
Slot1_AU_U=1

#nur für Dreambox!!!
Slot2_AU_G=0
Slot2_AU_S=0
Slot2_AU_U=0

#nur für dbox2!!!
Slot3_AU_A=0# durch Keywelt Image angepasster camd3 Socket
SOCKET=/tmp/camd.sock01
#KW-sockcheck
das is mal die Config der Serverbox

und so würde meine mgcf ausschauen die momentan mit der 1.31 läuft

Code:
# EMM messages
#    00 don't show any EMMs (default)
#    01 show only valid EMMs
#    02 show valid and bad EMMs with complete data display
M: { 01 }

# ECM messages
#    00 don't show anything about ecm
#    01 normal mode, show pids processed, decoded ecm and cw
#    02 verbose mode, show valid and bad ECMs with data
C: { 01 }

# AU
#    00 disable, no emm pids processed
#    01 enable, emm pids always processed for soft-au and shared ****s
#    02 auto, emm started only if channel cant be decoded
#    03 process emm pids for network ****s update only
A: { 02 }

# key update (sum 01 or 02 with 04)
#    01 update only new keys, default setting
#    02 update all keys (used for valid PMK checking)
#    04 enable TPS au
#    + tps SID, which pmt pid contains au pid
U: { 05 } 0x12c0

# config files folder (softcam, autoroll, ignore/priority)
#    00 files in /var/keys
#    01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
#    00 no network (default)
#    01 newcamd netclient
#    02 radegast netclient
#    04 camd3 netclient
#    08 gbox netclient
G: { 04 }

# network retry, use summ for several options
#    00 disable
#    01 retry every new ecm
#    02 try to connect to offline shares every Q: seconds
#    04 try to detect and fast reconnect to lost (and not used atm) server
#    + XX messages number and YY seconds to reconnect
#    mg will reconnect to server, if no answer to last XX ecm/keepalive or
#    if no answer for last ecm or keepalive sent for YY seconds
#    set to 0 to disable
N: { 07 } 5 30

# network ecm timeout in seconds
K: { 10 }

# newcamd dead routes connect retry, sec
Q: { 600 }

# network shares priority
# 00 gbox, newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd, gbox
# 02 newcamd, camd3, gbox, radegast
P: { 01 }

# on screen display type
#    00 No OSD (default)
#    01 neutrino
#    02 enigma
#    03 relook
#    + user password for http auth
# Neutrino:
#O: { 01 } root dbox2
# Enigma:
#O: { 02 } root dbox2
# Dreambox:
#O: { 02 } root dreambox
# Kein OSD:
O: { 00 } root dbox2

# on screen display Options, summ of:
#    01 show emu ecm
#    02 show network shares messages
#    04 show decoding failed / fta
#    08 show emm keys update
#    + web port to use for osd
S: { 15 } 80

# Log option, summ of:
#    00 off
#    01 network udp log
#    02 log to console
#    04 file, appended ! delete it by yourself, before it eat all your hdd
#    + IP udp-port log-file-name
L: { 00 } 192.168.1.23 8024 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer ****s while timeshifting or playing crypted recordings.
E: { 15 }

# cache option, summ of:
#    00 Off (default)
#    01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
#    02 Ecm data cache, remember CW for (E:) time
#    04 Emm cache for network ****s, do not resend the same emm twice, cache not cleared until restart
H: { 07 }

# reread files, summ of:
#    00 No (default)
#    01 reread config file on channel change (including priority and ignore, but not replace/cache)
#    02 reread SoftCam.Key on channel change
#    04 reread SoftCam.Key if file changed
R: { 07 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
B: { 01 }
Fehlen vl irgendwelche Dateien oder was kann da sein, ich probiere schon seit etlichen Stunden alles, aber es geht nicht!!
Bitte um Hilfe!!
habe sogar schon eine Orf karte erworben, aber die läuft ja in der Dbox nicht, dank Cryptoworks! (will kein 2 tes multicam) sondern nur fernsehen :)

DANKE!!!!!!