Deine Config würde allen helfen sonst kann man den Fehler ja nicht finden
Deine Config würde allen helfen sonst kann man den Fehler ja nicht finden
MfG Tomyslav
DBox 1 DVB 2000
DBox 2 KW Image
Dreambox 800 NN²
Humax 5400Z TOH 11.3
Kathrein UFS 910 E²
Kein Support über PN!
__________________
Hallo zusammen,
hier die Config oscam.server
############### General Instruction - oscam.server ###################
# To activate/deactivate the reader set enable = 1/0 #
# #
# You might specify further entries in each reader section #
# such as "caid =________" and/or "services = _________" but you needn´t #
# For further details see the OSCAM documentation #
################################################## ##########################
######################### Internal Readers ###############################
# Default Config should work with Seca, Conax, Cryptoworks, Viaccess, NDS #
# #
# For Irdeto, Betacrypt just activate "cardmhz=600" by removing the "#" #
# #
# For Nagra activate and set the correct "rsakey = " and "boxkey = " en #
# example for HDplus is included #
# #
# for specific Smartcards such as TIGER or Viaccess with AES-Key #
# see the OSCAM documentation #
################################################## ##########################
[reader]
enable=0
Label = Intern_Upper
Protocol = internal
boxid = 12345678
device = /dev/sci0
emmcache = 1,1,2
detect = CD
group = 1
#cardmhz = 600
#rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A 23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156 F9EB64E8168EF09E4D9C5CCA4DD5
#boxkey = A7642F57BC96D37C
[reader]
enable=0
label = Intern_Lower
protocol = internal
boxid = 12345678
device = /dev/sci1
emmcache = 1,1,2
detect = CD
group = 1
#cardmhz = 600
#rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A 23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156 F9EB64E8168EF09E4D9C5CCA4DD5
#boxkey = A7642F57BC96D37C
#################### External Readers / SMARGO ########################
# Important !!!! Use SMARGO Firmware 1.4 or 1.5 #
# With regard to your Smartcard set up the Reader/Smargo as follows: #
# #
# For Seca, Conax, Cryptoworks, Viaccess, NDS, Nagra #
# Frequency Fixed 3,69 Mhz / Normal / T=0 / EGT = 0 #
# #
# For Irdeto, Betacrypt #
# Frequency Fixed 6,0Mhz / Normal / T=1 / EGT = 0 #
# #
# For Nagra activate and complete the "rsakey = " and "boxkey = " entry #
# example for HDplus is included #
# #
# for specific Smartcards such as TIGER or Viaccess with AES-Key #
# see the OSCAM documentation #
################################################## ##########################
[reader]
enable=0
label = Extern_0
protocol = mouse
boxid = 12345678
device = /dev/ttyUSB0
emmcache = 1,1,2
detect = CD
group = 1
smargopatch=1
#rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A 23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156 F9EB64E8168EF09E4D9C5CCA4DD5
#boxkey = A7642F57BC96D37C
[reader]
enable=0
label = Extern_1
protocol = mouse
boxid = 12345678
device = /dev/ttyUSB1
emmcache = 1,1,2
detect = CD
group = 1
smargopatch=1
#rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A 23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156 F9EB64E8168EF09E4D9C5CCA4DD5
#boxkey = A7642F57BC96D37C
######################### Remote Readers ##############################
# Important !!!! Use this or not in personal responsibility #
# #
# No support in AAF Forum !!! #
# #
# For further details see the OSCAM documentation #
################################################## ##########################
[reader]
enable=1
label = cccam-reader
protocol = cccam
device = hisname.dyndns.org,12000
user = uxxxxxxx
password = uxxxxxx
group = 1
emmcache = 1,1,2
cccmaxhop = 5
cccversion = 2.0.11
[reader]
enable=0
label = camd35-reader
protocol = camd35
device = IP/dyndns,PORT
user = USER
password = PASS
group = 1
emmcache = 1,1,2
[reader]
enable=0
label = newcamd-reader
protocol = newcamd
key = 0102030405060708091011121314
device = IP/dyndns,PORT
user = USER
password = PASS
group = 1
emmcache = 1,1,2
######## end of file ########
hier die oscam.conf
################## General Instruction - oscam.conf ####################
# #
# per default no changes from the user are needed #
# but verify the IP-range oh your local Network #
# #
################################################## ##########################
[global]
Nice = -1
ClientTimeout = 7
FallbackTimeout=3
ClientMaxIdle=120
CacheDelay = 120
BindWait = 5
ResolveDelay = 15
WaitForCards = 1
PreferLocalCards = 1
LogFile = stdout
saveinithistory = 1
readerrestartseconds = 5
#LogFile = /var/keys/oscam.log
#usrfile = /var/keys/oscam_usr.log
[monitor]
nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255
appendchaninfo = 1
[webif]
httpport = 8888
httpuser = root
httppwd = oscam
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
[dvbapi]
enabled = 1
au = 1
boxtype = dbox2
user = dvbapi
######## end of file ########
Hab nur das in rot geändert.
Ich hoffe ihr könnt mir helfen.
Danke Uli
Kathrein 910
Nokia Dbox2