@Cyberscitymaste
Danke fuer deine Antwort.
Leider handelt es sich hier nicht um die Spanische Canal Digital sondern
Canaal Digitaal NL.
Trotzdem werde ich mal ueberpruefen ob das hier zufaelligerweise auch so ist.
Gr
@Cyberscitymaste
Danke fuer deine Antwort.
Leider handelt es sich hier nicht um die Spanische Canal Digital sondern
Canaal Digitaal NL.
Trotzdem werde ich mal ueberpruefen ob das hier zufaelligerweise auch so ist.
Gr
sag mal treumst du kjlar ist sie geeignet sie ist halt noch Beta sei froh das Leute sich die Mühe machen so etwas zu proggen
und ich muss sagen bei mir rennt sie 1 A mach doch einfach mal ein LOG und schick es mit ich schau mir das mal an und ich wette ich finde den fehler
deine CFG posten und was für ne Firmare haste drauf
also ich habe es geschaft bei mir Läuft nun auch Spanien 1 A ohne freezer
ich sage immer nur beschäftigt euch mit der Prio und der CFG
Secahandler auf jedenfall noch nicht aktivieren
dan laufen auf jedenfall sie Spania und auch einige andere Sachen
und die Prio muss stimmen
natürlich mus der server wo ihr die Karten herbekommt vernünftig eingerichtet sein
und das update kommt wartets doch mal ab es wird gerade an den BUG fixes gearbeitet die da noch aufgetaucht sind durch die BETA testa
ich poste hiermal einfach meine conf und prio vielleicht kannst du was entdecken.
PHP-Code:
[General]
background_execution=1
debug_level=3
log_to_console=1
log_to_file=0
logfile_name=/tmp/incubusCamd.log
softcamfile_name=/var/keys/SoftCam.Key
priofile_name=/var/bin/incubusCamd.prio
on_screen_messages_show=1
on_screen_messages_username=root
on_screen_messages_password=
on_screen_messages_key_update=0
on_screen_messages_wait_for_key_update=0
on_screen_messages_ecm=0
on_screen_messages_emm=0
console_logs_broadcast=0
console_logs_broadcast_port=666
webif=1
webif_port=668
[Prov:000000:CaID:0000]
check_priority=cs,emu,card
cs_protocol_order=cccam,newcamd,gbox,camd35,camd33,radegast,aroureos
process_emms_on_cs_mode=0
process_emm_g=0
process_emm_s=0
process_emm_u=0
[Servers]
card_server_url=cccam://xxxx:xxxxxx@xxxxxx.dyndns.org:12000
#card_server_url=cccam://cs-user2:passwort@host-IP:Port
#card_server_url=cccam://cs-user3:passwort@host-IP:Port
[CaIDTunnel]
1833:1702:000000:0080 #History HD
1833:1702:000000:0081 #Sky Sport HD
1833:1702:000000:0082 #Discovery HD
1833:1702:000000:0083 #Sky Cinema HD
1833:1702:000000:0084 #EuroSport HD
1833:1702:000000:007E #Disney Cinemagic HD
1833:1702:000000:007F #National Geography HD
mir kommt es eigentlich nur auf SKY und Digiturk (42°) an.PHP-Code:
P: 1702:000000:0082 # Premiere - Discovery HD
P: 1702:000000:007e # Premiere - Disney Cinemagic HD
P: 1702:000000:0084 # Premiere - Eurosport HD
P: 1702:000000:0080 # Premiere - History HD
P: 1702:000000:007f # Premiere - NatGeo HD
P: 1702:000000:0083 # Premiere - Sky Cinema HD
P: 1702:000000:0081 # Premiere - Sky Sport HD
P: 1702:000000:000a # Premiere - Cinema
I: 09C4:000000:000a # Premiere - Cinema
P: 1702:000000:000b # Premiere - Cinema1
I: 09C4:000000:000b # Premiere - Cinema1
P: 1702:000000:002b # Premiere - Cinema24
P: 1702:000000:0009 # Premiere - Sky Action
P: 1702:000000:0029 # Premiere - Sky Cinema Hits
P: 1702:000000:0008 # Premiere - Sky Comedy
P: 1702:000000:0014 # Premiere - Sky Emotion
P: 1702:000000:000a # Premiere - Sky Krimi
P: 1702:000000:0204 # Premiere - Sky Nostalgie
P: 1702:000000:002a # Premiere - 13Street
P: 1702:000000:3393 # Premiere - Animax
I: 0d22:000000:3393 # Premiere - Animax
I: 09c4:000000:3393 # Premiere - Animax
P: 1702:000000:003e # Premiere - AXN Action
P: 1702:000000:xxxx # Premiere - Biography Channel
I: 0d22:000000:3398 # Premiere - Biography Channel
P: 1702:000000:0042 # Premiere - Boomerang
P: 1702:000000:3394 # Premiere - Cartoon Network
I: 0d22:000000:3394 # Premiere - Cartoon Network
I: 09c4:000000:3394 # Premiere - Cartoon Network
P: 1702:000000:000e # Premiere - Discovery Channel
P: 1702:000000:0022 # Premiere - Disney Channel
P: 1702:000000:0019 # Premiere - Disney Cinemagic
P: 1702:000000:0043 # Premiere - Eclips
P: 1702:000000:3331 # Premiere - ESPN
I: 0d22:000000:3331 # Premiere - ESPN
I: 09c4:000000:3331 # Premiere - ESPN
P: 1702:000000:3395 # Premiere - Eurosport
P: 1702:000000:000f # Premiere - Focus Gesundheit
P: 1702:000000:0010 # Premiere - Fox
P: 1702:000000:0206 # Premiere - Goldstar TV
P: 1702:000000:0016 # Premiere - Heimatkanal
P: 1702:000000:0044 # Premiere - History
P: 1702:000000:001c # Premiere - Jetix
P: 1702:000000:0013 # Premiere - Junior
P: 1702:000000:4462 # Premiere - Kabel Eins Classic
P: 1702:000000:003c # Premiere - Kinowelt
P: 1702:000000:0203 # Premiere - MGM
P: 1702:000000:00a8 # Premiere - Motorvision
P: 1702:000000:7009 # Premiere - MTV Entertainment
P: 1702:000000:6fff # Premiere - MTV Music
P: 1702:000000:000d # Premiere - Nat Geo
P: 1702:000000:000c # Premiere - Nat Geo Wild
P: 1702:000000:700a # Premiere - Nick Premium
P: 1702:000000:001a # Premiere - Playhouse Disney
P: 1702:000000:003f # Premiere - Romance TV
P: 1702:000000:001b # Premiere - RTL Crime
P: 1702:000000:3397 # Premiere - RTL Living
P: 1702:000000:001d # Premiere - RTL Passion
P: 1702:000000:4461 # Premiere - Sat 1 Comedy
P: 1702:000000:0024 # Premiere - SciFi
P: 1702:000000:0034 # Premiere - Spiegel Geschichte
P: 1702:000000:0045 # Premiere - Sportdigital TV
P: 1702:000000:003d # Premiere - TNT Film
P: 1702:000000:0032 # Premiere - TNT Serie
P: 1702:000000:6ff1 # Premiere - VH1 Classic
P: 1702:000000:00df # Premiere - Sky Bundesliga
P: 1702:000000:0035 # Premiere - Sky Sport Austria
P: 1702:000000:0011 # Premiere - Sky Sport Info
P: 1702:000000:00dd # Premiere - Sky Sport 1
P: 1702:000000:00de # Premiere - Sky Sport 2I: 1801:000401:0035, 1801:000501:0035
P: 1702:000000:0035, 1722:000000:0035
P:0500:008110 "prio - Seasons "
P:0664:000000 "prio - Digiturk HD "
P:0d00:000000 "prio - Digiturk (7E/42E)"
P:0500:023b00 "prio - Mct Mini (13E)"
P:0500:021110 "prio - Art /Ant1 (13E)"
P:0604:000000 "prio - Nova/LTV/Showtime/SCT/Spice Platinum/ARY/BulSatCom/multichoiceDSTV(13E/5W/7W/15W/39E/68.5E)"
P:0100:000065 "prio - S2 - Cyfra+ (13E)"
P:0100:004101 "prio - Digital+"
P:0500:07c000 "prio - TPS (13E) (TPSCrypt2) (EMU only Via2.3)"
P:1801:007101 "prio - Polsat (13E)"
P:0919:000000 "prio - Sky Italia (13E)"
P:0500:024400 "prio - Dorcel TV(FREEX/FREEX2/Xdream/DORCEL TV) (13E)"
P:0500:020910 "prio - Sex View (13E)"
P:0100:000081 "prio - S2 - Canal+ France (19E)"
P:0100:000080 "prio - S2 - Canal+ France (19E)"
P:1801:000000 "prio - Premiere (19E) (N2)"
P:0d02:000000 "prio - Upc Direct (19E)"
P:0100:00006a "prio - S2 - Canal+ Digitaal NL (19E)"
P:0500:024f00 "prio - MaxTV Romania (5E)"
P:1802:000000 "prio - TV CABO"
P:0961:000000 "prio - BskyB & Setanta Sports (28E)"
P:0b00:000000 "prio - Conax (TechnisatMTV+Radio-19E/FocusSat-1W/C+ Nordic-1W/iTVN-13E/DigiAlb-16E/ContoTV-7E/DishTV-95E)"
P:0602:000000 "prio - Pink Plus/Pehla (13E/16E)"
P:091f:000000 "prio - Total TV (16E)"
P:0d06:000000 "prio - ITV Partner (16E)"
P:0100:00002f "prio - Orbit (26E/8W)"
P:0622:000000 "prio - AlbaniaSat/Canal+ NL/Euro1080 (16E/19E/23E/36E)"
P:092b:000000 "prio - D-Smart (42E)"
P:0500:020810 "prio - ABsat (19E/13E)"
P:0100:00006c "prio - Canal+ Vlaanderen (19E/23E)"
P:0500:020a00 "prio - HRT Croatia (13E) v2.5"
P:0500:022e00 "prio - Neovisne Tv Hayat (13E) "
P:0500:023800 "prio - SRG Swiss (13E) (new card)"
P:0100:033110 "prio - Ala Carte (19E)"
P:0500:030700 "prio - JS SPORT 1&2 (13E)"
P:092f:000000 "prio - dolce (39E)"
P:090f:000000 "prio - Viasat (5E)"
P:1810:000000 "prio - D+ SPAÝN (30W) (NAGRA 3)"
P:0929:000000 "prio - boom (4W)"
P:0668:000000 "prio - Orbit (26E/8W)"
P:0100:000035 "prio - Orbit TVMAX (26E)"
P:0100:00006d "prio - Ketnet/Canvas (19E)"
P:0100:00006e "prio - CanalSat Horizons (22W)"
P:0500:021700 "prio - Private Spice (13E)"
P:0500:0a0000 "prio - Bbc Prime (13E)"
P:1801:002111 "prio - Digi Tv"
P:0960:000000 "prio - Sky Uk (28E)"
P:0500:023100 "prio - Various"
P:5501:000000 "prio - Grifin (39E)"
P:0550:010000 "prio - AthinaSat (39E) [Griffin]"
P:0558:010000 "prio - AthinaSat (39E) [Griffin-2]"
P:0100:000084 "prio - Virtuall Card K3/S2 - Numericable (13E/19E)"
P:0100:000085 "prio - S2 - FTC (13E/19E)"
P:0100:000086 "prio - S2 - Pro Tv (13E/19E)"
P:0500:023600 "prio - CANALSAT FRANCE (via2) (19E)"
P:0500:008110 "prio - CANALSAT FRANCE (via) (19E)"
P:0500:025100 "prio - Mct (13E)"
P:0500:009400 "prio - Srg Swiss (13E) (EMU)(old card)"
P:04a7:000000 "prio - InXtc/XPlusTV (13E/10E) (dreamcrypt)"
P:0500:021c00 "prio - Free-X Tv/XDreamTV (13E/19E)"
P:0b00:022f00 "prio - MaxTV Romania (5E)"
P:0d03:000000 "prio - Cryptoworks CAID"
P:0d05:000000 "prio - Cryptoworks CAID"
P:0d07:000000 "prio - Cryptoworks CAID"
P:0d0f:000000 "prio - Cryptoworks CAID"
P:0d70:000000 "prio - Cryptoworks CAID"
P:0603:000000 "prio - JSC Sport+ (7W)"
P:1801:001101 "prio - DigiKabel (ID.Unused)"
P:0500:023100 "prio - Nsab (5E)"
P:0100:0000b1 "prio - Mediaset (13E/5W)"
P:0100:000821 "prio - Numericable (19E/13E)"
P:0b01:000000 "prio - TVN/Conto TV (13E/12W)"
P:0500:022c00 "prio - RTV International (13E)"
P:0500:021900 "prio - Bht Bosnia TV (13E/12W)"
I:09c4:000000 "prio - Premiere NDS (19E)"
versuch das mal. damit läuft das bei mir ohne probleme ;)
[General]
background_execution=0
debug_level=0
log_to_console=0
log_to_file=0
softcamfile_name=/var/keys/SoftCam.Key
priofile_name=/var/keys/incubusCamd.prio
on_screen_messages_show=0
on_screen_messages_username=root
on_screen_messages_password=
on_screen_messages_key_update=0
on_screen_messages_wait_for_key_update=0
on_screen_messages_ecm=0
on_screen_messages_emm=0
console_logs_broadcast=0
console_logs_broadcast_port=666
webif=1
webif_port=668
[Prov:000000:CaID:0000]
check_priority=cs,cs,cs
cs_protocol_order=cccam
process_emms_on_cs_mode=0
process_emm_g=0
process_emm_s=0
process_emm_u=0
seca3_handler=0
[Servers]
card_server_url=cccam://****************hier deine daten*************
[CaIDTunnel]
1833:1702:000000:0080 # History HD
1833:1702:000000:0081 # Sky Sport HD
1833:1702:000000:0082 # Discovery HD
1833:1702:000000:0083 # Sky Cinema HD
1833:1702:000000:0084 # Eurosport HD
1833:1702:000000:007E # Disney Cinemagic HD
1833:1702:000000:007F # NatGeo HD
Geändert von Gabberhead (28.10.09 um 18:52 Uhr)
Ihr habts immer noch nicht gelesen
es ist nicht genug Speicher in der Kathrein
Schaltet den webif aus
und vorallem die .prio liegt nicht unter/var/bin
sie liegt in var/keys also muss die zeile geändert werden sonst wird sie nicht gelesen
versucht Skins oder sonstiges nur über Swap Stick ihr habt einfach nicht genug platz je mehr freien speicher ihr habt um so stabiler läuft sie.
check_priority=cs,cs,cs falsch wen ihr nur CS macht muss sie so aussehen
check_priority=cs
@Gabberhead
Danke, werde ich mal morgen abend austesten.
@Cyberscitymaste
auch dir Danke, teste ich aus.
(apropos mit dem speicher, ich nutze ein Octagon 1018)
Hallo,
also, es ist richtig das die CCcam Anfragen an alle Server schickt und
dann die erste "ok" Antwort verwendet. Aber dann merkt sich die CCcam
woher die "ok" Antwort kam und sendet dann nur mehr an diesen
Server. Weiter kann auch die CCcam so konfiguriert werden das nur mehr
die richtigen durchgelassen werden. Ist halt ein wenig Aufwand nötig.
Aber nun wieder zurück zur Incubus. Diese ist beta da sie einfach noch
immer instabil läuft. Es mag sein das einer diese stabil zum laufen bekommt,
aber leider ist das nicht bei jeden möglich.
Incubus ist ein instabiles Cam auf einem instabilen System programmiert.
Bei E2 ist der Flashspeicher einfach zu klein und muss auf dem USB Stick
ausgelagert werden.
Btw. das tmp Verzeichnis ist sicher nicht voll, das dies im Hauptspeicher
angelegt wird und nicht im Flashspeicher. Und der ist ausreichend für
diese Anwendung. Bitte überlegen bevor man solchen Mist erzählt.
Natürlich habe ich grossen "RESPEKT" vor der Arbeit der Programmierer.
Aber es wäre besser die Incubus fürs AAF ebenfalls zu programmieren,
da es da sicherlich stabiler laufen würde. Es ist einfach so, das das E2
nicht bei jedem ohne Probleme läuft, weil es nicht für den Receiver
programmiert wurde.
Sry, vl ist es ein wenig grob, aber ich bin jetzt schon ein wenig enttäuscht
von der Uneinsichtigkeit der Programmierer. Jetzt bekommt man schon
von dem Hersteller nur vollgebugte Software (mittleweile eh schon besser)
und dann machen es die Hobbyprogrammierer nach, wo doch die Zeit dieser,
weil Freizeit, viel wertvoller ist ^^
Wünsche euch einen schönen Abend,
Gruss
Riddik
morgen,
wollt da zu der Problematik die manche haben auch mal was sagen.
Ich hab hier BA Last Summer Dream am laufen von ner 320er internen Platte mit der normalen incubus, alles über WLAN, die prio und config von Cyberscitymaste von den vorherigen seiten.
Und ich habe damit keine Probleme, laüft Perfekt. (zu stoßzeiten vieleicht mal 2-3 sek. warten).
Klar ist dass 60 sek. flash um einiges schneller, ungefähr 1.40 min.
Aber von Standby (Uhr im Display) dauert es auch nur ne Sekunde bis Bild da iss.
Aber wiederum kann ich nix sagen über´s flashimg. mit incubus, weil ich dass noch ned getestet habe.
mfg
Bei mir rennt die IncubusCamd 0.93 auf der UFS910 100%.
Jetzt musste ich eine UFS922 einrichten und war sehr froh auch dort die 0.93 über das Menü einspielen zu können.
Nur: Die Incubus verband sich mit meinem CCcamd Server, aber das wars dann auch. Es gab eine Anfrage die der Server positiv beantwortete , das TV Gerät blieb aber dunkel. Gibt es eine Chance das zu ändern. Auf jeden Fall sollen die Sky HD Kanäle hell werden.
so dan will ich auch mal was zu deinem Senf ab lassen ich habe nunmehr die incubus stabil am laufen
was nicht stabil ist ist e2 DA GEBE ICH DIR RECHT aber das ist auch das einzige
frage mal im AAF Board nach Incubus Tja da bekommste ne aussage und da kann ich den programierer der Incubus voll verstehen
Antwort AAF Board Incubus wird hier nicht supportet klar sobald ne frage kommt Closed aber Mbox wird und Camd3 auch KOMISCH anbieten tue sies aber im Online Menue nur keine Hilfe
so und nun zu deinem Speicher da könnte ich dich auch mal aufklären
haste mal mit top nachgeschaut wieviel du frei hast und wieviel auch als swap angenommen wird im system
also ich werde mal meine werte bekannt geben
45588K used 2599K free 0K shared 772K buff 8428K cached
so und nun zum Swap ?????
der wird erst garnicht angezeigt erstellt ja aber mehr auch nicht
meine konstelation und die läuft wie mir mit sicherheit schon so einige glauben und auch verwenden als 1
die leute bei denen plötzich die incubus aussteigt überprüft dan mal per ftp ob euer Swap ordner noch da ist oder weg ist in den meisten fällen steigt der USB stick aus den der wird heiß und das kommt durch ständigen daten zugriff
nehmt ne kleine HD auf USB und macht da ne SWAP drauf und gut ist
ich selber habe ne 160 GB HD dran und davon 10 GB als SWAP und bei mir rennt sie nu
selbst die Spania und da hat die incubus noch probs wegen Provider id bei Channel ID 1810
und legt dan die Incubus auf die HD lagert alles aus soweit ihr könnt
Schaltet den FTP im autostart ab wozu auch unnötigen ballast mit laden
alles was nicht gebraucht wür abschalten.
Edit
Geändert von tomcat01 (30.10.09 um 11:25 Uhr)
kann jemand sagen ob meine config aus 0,93teta so richtig ist:
welche prio soll man am besten nehmen ?################################################## ############################
# incubusCamd configuration file #
# All configuration options in this file observe the same format: #
# <configuration_name>=<configuration_value> #
# #
# Each section are [<section_name>:<option_1>:<option_x>] like. #
# #
# No matter about white spaces on any place or UNIX/DOS style files #
################################################## ############################
########################### general configuration ############################
[General]
# Enable (1) or disable (0) background execution
# 0 - Off
# 1 - On
#
background_execution=0
# This sets the level of console output for debugging:
# 0 - No debug messages, 1 - First level debug messages, 2 - Second level debug messages,
# 3 - Print all debug messages
#
debug_level=0
# This option enables (1) or disables (0) the writing of debug information to the
# console.
#
log_to_console=0
# This option enables (1) or disables (0) the writing of console output to a log file
#
log_to_file=0
# When log_to_file is set to 1, this is the path and filename to write console
# ouput to.
#
logfile_name=/var/bin/incubusCamd.log
# This is the path and filename to read SoftCam.Key file
# by default it will be searched in the /var/keys directory
#
softcamfile_name=/var/keys/SoftCam.Key
# This is the path and filename to read prio file
# by default it will be searched in the /var/bin directory, or in /etc, or in /var/keys
#
priofile_name=/var/keys/incubusCamd.prio
# Used to activate on-screen messages. Username and password required if
# HTTP authentication is enabled on enigma.
# 0 - Off
# 1 - On
#
on_screen_messages_show=1
on_screen_messages_username=root
on_screen_messages_password=
on_screen_messages_key_update=0
on_screen_messages_wait_for_key_update=0
on_screen_messages_ecm=0
on_screen_messages_emm=0
# When activated, incubusCamd will listen on the specified port for connections. All
# log activity will be broadcast in real-time to connected clients.
#
console_logs_broadcast=0
console_logs_broadcast_port=666
# Enable/disable incubusCamd web interface (default port is 668).
# 0 - Disable
# 1 - Enable
webif=1
webif_port=668
########################### provider configuration ###########################
#
# All parameters are in hexadecimal notation.
# Each section is defined by the provider id value.
# If you don't know the provider id value then use the provider id "000000" and ca id "0000".
# On provider 000000 caid 0000 goes all provider wich are not declared. If the provider
# is declared then the cam will use the provider founded.
#
[Prov:000000:CaID:0000]
# ----------------------------------------------------------------------------
# this provider is a stand-in for all cards and all caid not declared previously
#
# You can select wich type of priority to assign on each caid/prov combination
# priority name available are: card,emu,cs
# card: internal card reader
# emu: internal emulator
# cs: card share protocols
# each type must be separated by a comma
#
# you can also set to use only cs and nothing more, to do it insert on each comma "cs"
# example: check_priority=cs,cs,cs # only cs in this case
# example: check_priority=card,emu,emu # no cs in this case
# obviously this is not suggested but if you prefer to disable an option you should do it in this way
# you can also declare only one type: check_priority=cs
# or two types: check_priority=cs,emu
# and so on
check_priority=cs
# You can select wich protocol will be used first for the current caid/prov combination
# protocol name available are: newcamd,cccam,gbox,radegast,camd33,camd35,aroureos
# each protocol must be separated by a comma
#
# you can also declare only one type: cs_protocol_order=cccam
# or two types: cs_protocol_order=cccam,newcamd
# and so on
cs_protocol_order=cccam
# Enable (1) or disable (0) emm process when a cs protocol is used
# 0 - Off
# 1 - On
#
process_emms_on_cs_mode=0
# Enable (1) or disable (0) emm g type process
# 0 - Off
# 1 - On
#
process_emm_g=0
# Enable (1) or disable (0) emm s type process
# 0 - Off
# 1 - On
#
process_emm_s=0
# Enable (1) or disable (0) emm u type process
# 0 - Off
# 1 - On
#
process_emm_u=0
# Enable (1) or disable (0) seca 3 ecm pid handler
# when is set to On, it will try to use seca 3 ecm pid
# before try seca 2 ecm pid, otherwise seca 2 pid will
# be selected firstly
# 0 - Off
# 1 - On
#
seca3_handler=0
# This is the ChannelID wich will be used as first value
# on irdeto channels. Value "-1" means no preferred channel id will be used
# The value is expressed as decimal. Automatic change will be done.
#chid=-1
#[Prov:000501:CaID:1833]
#check_priority=cs,emu,card
#cs_protocol_order=cccam
#process_emms_on_cs_mode=0
#process_emm_g=0
#process_emm_s=0
#process_emm_u=0
#seca3_handler=0
#chid=-1
########################### servers configuration ############################
[Servers]
#
# This is the section for the multi-server configuration.
#
# URL of card-server to use, formats are as follows:
#
# newcamd://<username_31>:<password_31>@<hostname>:<port>:<cai d_4>:<prov_id_6>/<des_key_14>/[EMM]
# aroureos://@<hostname>:<port>:<caid_4>:<prov_id_6>/[EMM]
# radegast://@<hostname>:<port>:<caid_4>:<prov_id_6>/[EMM]
# camd33://<username_10>:<password_10>@<hostname>:<port>:<cai d_4>:<prov_id_6>/[aes_key_16]/[EMM]
# camd35://<username_32>:<password_32>@<hostname>:<port>:<cai d_4>:<prov_id_6>/[EMM]
# gbox://<localhost>:<localport>:<password_8>@<peer_address >:<peer_port>:<peer_pass_8>/[EMM]
#
# cccam://<username_20>:<password_32>@<hostname>:<port>/<receive_emu_shared>/[EMM]
# where <receive_emu_shared> should assume value "yes" (without quotes, if you like to receive emus data shared by the server) or "no" (this is assumed by default)
#
#
# NOTE: The "EMM" suffix is optional and tells the card-server client whether
# to send EMM's to the card-server or not. Enabling or disabling this only
# has effect if the card-server is configured to accept emms from this client.
#
# NOTE 2: The "card_server_url" is not the same as previously declared in the prov/caid section
# use how many server as you like
#
# i.e:
#
#card_server_url=cccam://username:password@192.168.1.24:12000
#card_server_url=cccam://username:password@yourname.dyndns.org:15000
#card_server_url=gbox://yourname.dyndns.org:6666:password@hisname.dyndns.o rg:6666:peer_pass
#card_server_url=cccam://username:password@hostname:port
#card_server_url=gbox://192.168.1.24:5555:password@192.168.1.32:4444:peer_ pass
#card_server_url=newcamd://username:password@192.168.0.100:10550:0500:028800/0102030405060708091011121314
#card_server_url=radegast://@192.168.0.100:10550:0100:000065
#card_server_url=aroureos://@yourhostname.dyndns.org:10666:0500:007C00
#card_server_url=camd35://username:password@192.168.0.50:14150:0603:000000
#card_server_url=camd33://username:password@192.168.0.50:10550:0603:000000 # cam33 without AES encryption
#card_server_url=camd33://username:password@192.168.0.50:10500:0604:000000/01020304050607080910111213141516 # cam33 with AES encryption
#card_server_url=newcamd://username:password@192.168.0.100:10550:0500:028800/0102030405060708091011121314/EMM # EMM is enabled for this server
card_server_url=cccam:// xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
########################### CaIDs tunneling configuration ############################
[CaIDTunnel]
#
# All values are in hex notation
# In this file you can configure what CAIDs/PIDs incubusCamd should tunnel to another CAID
#
# situation 1: this caid, all idents, on all channels will use the tunnel_caid
# caid:tunnel_caid
#
# situation 2: this caid/ident pair will use the tunnel_caid
# caid:tunnel_caid:ident
#
# situation 3: this caid/ident pair, on channel 'sid' will use the tunnel_caid
# caid:tunnel_caid:ident:sid
#
# i.e:
#
#1833:1702:000000:0082 # this one should tunnel premiereHD nagra3 into betacrypt cards
#1833:1702:000000:0081 # this one should tunnel premiereHD nagra3 into betacrypt cards
1833:1702:000000:0080 #History HD
1833:1702:000000:0081 #Sky Sport HD
1833:1702:000000:0082 #Discovery HD
1833:1702:000000:0083 #Sky Cinema HD
1833:1702:000000:0084 #EuroSport HD
1833:1702:000000:007E #Disney Cinemagic HD
1833:1702:000000:007F #National Geography HD
Thomson Scenium HDTV 37" PB 220 S4
Kathrein 910si 1W
Ja sieht gut aus. Evtl. kannst Du auch das Web Interface noch deaktivieren.
Die Prio kommt immer auf deine Karten an, die Du im Share hast.
MfG Tomyslav
DBox 1 DVB 2000
DBox 2 KW Image
Dreambox 800 NN²
Humax 5400Z TOH 11.3
Kathrein UFS 910 E²
Kein Support über PN!
__________________