@Cyberscitymaste
es läuft...keine ahnung warum aber es läuft auf einmal
ausser das alle 30sec das bild hängt
vielen dank nochmal für deine zeit und mühe
mfg thorsten
@Cyberscitymaste
es läuft...keine ahnung warum aber es läuft auf einmal
ausser das alle 30sec das bild hängt
vielen dank nochmal für deine zeit und mühe
mfg thorsten
du hast ja auch meinen Server nu drin dan muss es gehn
so ich hab nun mal deine cfg und prio benutzt und jetzt funktionieren schon mal die umschaltzeiten und die cam hängt sich nicht auf. aber HD geht allerdings immernoch nicht. Hab mir auch nochma ein freischaltzeichen schicken lassen. Keine Veränderung.
Wenn ich auf ein HD Sender schalte sucht er immernoch abwechselnd nach CaID 1833, 1834 und 09C4. Ich hab zwar schon mal gefragt, aber kann es daran liegen, dass der Server (Dreambox 500c) kein HD kann, sondern nur der Client, weil eigentlich wird ja nur der Schlüssel benutzt und der Client dated ja auch die Karte im Server ab.
so wie ich das sehe ist Ja d die 500C ne Kabel Box wie willste den da auf ner Kathy mit Sat HD auf machen
Kabel Schlüssel sind 1722
und Sat hat 1702 also wird 1833 auf 1702 gemäpt
damit geht dan HD nicht bei dir du must ein Share Partner Haben der 1702 Hat dan Gehts
Bitte hier keine Shareangebote, regelt das bitte per PN.
Geändert von dirk01 (28.09.09 um 09:03 Uhr)
Danke für deine Antwort!
Ich dachte da alle anderen Sender gehen, muss auch HD gehen!
Aber das geht nicht weil es gemappt werden muss, wenn ich dich richtig verstehe.
Also wird man mit einem SAT-Receiver nie von einem Kabel-Server HD sharen können.....
Du kannst ja mal versuchen die Kabel HD Kanäle auf Sat zu mappen. Weiß aber nicht ob es funktioniert aber einen Versuch wäre es wert. Sollte dann so aussehen und funktioniert wenn dann nur mit KD:
[CaIDTunnel]
1834:1702:000000:0080 #History HD
1834:1702:000000:0081 #Sky Sport HD
1834:1702:000000:0082 #Discovery HD
1834:1702:000000:0083 #Sky Cinema HD
1834:1702:000000:0084 #EuroSport HD
1834:1702:000000:007E #Disney Cinemagic HD
1834:1702:000000:007F #National Geography HD
MfG Tomyslav
DBox 1 DVB 2000
DBox 2 KW Image
Dreambox 800 NN²
Humax 5400Z TOH 11.3
Kathrein UFS 910 E²
Kein Support über PN!
__________________
aber wie gesagt melde dich mal per PM dan kriegen wir das schon hin
und zu dem Herrn Moderator danke fürs löschen
aber dein mäpping was du vorschlägst kann niemals gehn scaus dir an und lerne mal Channel ID´s FG nix für ungut ich habs extra darüber beschrieben
ach und noch was HD auf Kabel ist 1834 und 1833 ist sat
wobei 1834 auch auf sat verwendet wird.
MfG Tomyslav
DBox 1 DVB 2000
DBox 2 KW Image
Dreambox 800 NN²
Humax 5400Z TOH 11.3
Kathrein UFS 910 E²
Kein Support über PN!
__________________
Hallo liebe ForumFreaks,
habe mir heute die UFS922 gekauft, und muss sagen dass ich langsam am verzweifeln bin. Ich habe Incubuscamd am laufen, er bekommt auch die Schlüssel CW0 und CW1 aber das Bild bleibt leider Schwarz :( Ich hoffe mir kann jemand helfen. Das Sharing läuft über das I-Net, also nicht local.
Vielen Dank im Vorraus
Weegy
PS.: meine Conf
################################################## ############################
# incubusCamd configuration file #
# All configuration options in this file observe the same format: #
# <configuration_name>=<configuration_value> #
# #
# Each section are [<section_name>:<option_1>:<option_x>] like. #
# #
# No matter about white spaces on any place or UNIX/DOS style files #
################################################## ############################
########################### general configuration ############################
[General]
# Enable (1) or disable (0) background execution
# 0 - Off
# 1 - On
#
background_execution=0
# This sets the level of console output for debugging:
# 0 - No debug messages, 1 - First level debug messages, 2 - Second level debug messages,
# 3 - Print all debug messages
#
debug_level=0
# This option enables (1) or disables (0) the writing of debug information to the
# console.
#
log_to_console=0
# This option enables (1) or disables (0) the writing of console output to a log file
#
log_to_file=0
# When log_to_file is set to 1, this is the path and filename to write console
# ouput to.
#
logfile_name=/var/bin/incubusCamd.log
# This is the path and filename to read SoftCam.Key file
# by default it will be searched in the /var/keys directory
#
softcamfile_name=/var/keys/SoftCam.Key
# This is the path and filename to read prio file
# by default it will be searched in the /var/bin directory, or in /etc, or in /var/keys
#
priofile_name=/var/keys/incubusCamd.prio
# Used to activate on-screen messages. Username and password required if
# HTTP authentication is enabled on enigma.
# 0 - Off
# 1 - On
#
on_screen_messages_show=1
on_screen_messages_username=root
on_screen_messages_password=
on_screen_messages_key_update=0
on_screen_messages_wait_for_key_update=0
on_screen_messages_ecm=0
on_screen_messages_emm=0
# When activated, incubusCamd will listen on the specified port for connections. All
# log activity will be broadcast in real-time to connected clients.
#
console_logs_broadcast=0
console_logs_broadcast_port=666
# Enable/disable incubusCamd web interface (default port is 668).
# 0 - Disable
# 1 - Enable
webif=1
webif_port=668
########################### provider configuration ###########################
#
# All parameters are in hexadecimal notation.
# Each section is defined by the provider id value.
# If you don\'t know the provider id value then use the provider id "000000" and ca id "0000".
# On provider 000000 caid 0000 goes all provider wich are not declared. If the provider
# is declared then the cam will use the provider founded.
#
[Prov:000000:CaID:0000]
# ----------------------------------------------------------------------------
# this provider is a stand-in for all cards and all caid not declared previously
#
# You can select wich type of priority to assign on each caid/prov combination
# priority name available are: card,emu,cs
# card: internal card reader
# emu: internal emulator
# cs: card share protocols
# each type must be separated by a comma
#
# you can also set to use only cs and nothing more, to do it insert on each comma "cs"
# example: check_priority=cs,cs,cs # only cs in this case
# example: check_priority=card,emu,emu # no cs in this case
# obviously this is not suggested but if you prefer to disable an option you should do it in this way
# you can also declare only one type: check_priority=cs
# or two types: check_priority=cs,emu
# and so on
check_priority=cs,,
# You can select wich protocol will be used first for the current caid/prov combination
# protocol name available are: newcamd,cccam,gbox,radegast,camd33,camd35,aroureos
# each protocol must be separated by a comma
#
# you can also declare only one type: cs_protocol_order=cccam
# or two types: cs_protocol_order=cccam,newcamd
# and so on
cs_protocol_order=cccam,,,,,,
# Enable (1) or disable (0) emm process when a cs protocol is used
# 0 - Off
# 1 - On
#
process_emms_on_cs_mode=0
# Enable (1) or disable (0) emm g type process
# 0 - Off
# 1 - On
#
process_emm_g=0
# Enable (1) or disable (0) emm s type process
# 0 - Off
# 1 - On
#
process_emm_s=0
# Enable (1) or disable (0) emm u type process
# 0 - Off
# 1 - On
#
process_emm_u=0
# Enable (1) or disable (0) seca 3 ecm pid handler
# when is set to On, it will try to use seca 3 ecm pid
# before try seca 2 ecm pid, otherwise seca 2 pid will
# be selected firstly
# 0 - Off
# 1 - On
#
seca3_handler=0
#[Prov:000501:CaID:1833]
#check_priority=cs,emu,card
#cs_protocol_order=cccam,newcamd,gbox,camd35,camd3 3,radegast,aroureos
#process_emms_on_cs_mode=0
#process_emm_g=0
#process_emm_s=0
#process_emm_u=0
#seca3_handler=0
########################### servers configuration ############################
[Servers]
#
# This is the section for the multi-server configuration.
#
# URL of card-server to use, formats are as follows:
#
# newcamd://<username_31>:<password_31>@<hostname>:<port>:<cai d_4>:<prov_id_6>/<des_key_14>/[EMM]
# aroureos://@<hostname>:<port>:<caid_4>:<prov_id_6>/[EMM]
# radegast://@<hostname>:<port>:<caid_4>:<prov_id_6>/[EMM]
# camd33://<username_10>:<password_10>@<hostname>:<port>:<cai d_4>:<prov_id_6>/[aes_key_16]/[EMM]
# camd35://<username_32>:<password_32>@<hostname>:<port>:<cai d_4>:<prov_id_6>/[EMM]
# gbox://<localhost>:<localport>:<password_8>@<peer_address >:<peer_port>:<peer_pass_8>/[EMM]
#
# cccam://<username_20>:<password_32>@<hostname>:<port>/<receive_emu_shared>/[EMM]
# where <receive_emu_shared> should assume value "yes" (without quotes, if you like to receive emus data shared by the server) or "no" (this is assumed by default)
#
#
# NOTE: The "EMM" suffix is optional and tells the card-server client whether
# to send EMM\'s to the card-server or not. Enabling or disabling this only
# has effect if the card-server is configured to accept emms from this client.
#
# NOTE 2: The "card_server_url" is not the same as previously declared in the prov/caid section
# use how many server as you like
#
# i.e:
#
#card_server_url=cccam://username:password@192.168.1.24:12000
#card_server_url=cccam://username:password@yourname.dyndns.org:15000
#card_server_url=gbox://yourname.dyndns.org:6666:password@hisname.dyndns.o rg:6666:peer_pass
#card_server_url=cccam://username:password@hostname:port
#card_server_url=gbox://192.168.1.24:5555:password@192.168.1.32:4444:peer_ pass
#card_server_url=newcamd://username:password@192.168.0.100:10550:0500:028800/0102030405060708091011121314
#card_server_url=radegast://@192.168.0.100:10550:0100:000065
#card_server_url=aroureos://@yourhostname.dyndns.org:10666:0500:007C00
#card_server_url=camd35://username:password@192.168.0.50:14150:0603:000000
#card_server_url=camd33://username:password@192.168.0.50:10550:0603:000000 # cam33 without AES encryption
#card_server_url=camd33://username:password@192.168.0.50:10500:0604:000000/01020304050607080910111213141516 # cam33 with AES encryption
Hast Du die card_server_url absichtlich weggelassen?
Poste mal deine incubusCamd.prio
MfG Tomyslav
DBox 1 DVB 2000
DBox 2 KW Image
Dreambox 800 NN²
Humax 5400Z TOH 11.3
Kathrein UFS 910 E²
Kein Support über PN!
__________________
Heuy Leute, ich weiss, dass man Infos zum Entwicklungsfortschritt
der Incubuscamd nur sehr schwer bekommt, oder liege ich da flasch.
Kennt einer von euch die Entwicklerhomepage.
Leider gibt es ja keine andere softcam für die Kathi 910, die CCcam
unterstützt.
Hab noch etwas gefunden, es gibt wohl eine 0.93 teta version:
IncubusCamd 0.93-teta released
25/09/2009
V0.93-teta
* fixed (??) EMM for all known codifies (if there are any kind of problem report as usually)
* added chid value in the provid/caid section
* added logs for EMM so we can find what's and if something is wrong or not
This is a test version. Why is published? Simply because we can't test all codifies with EMM, so not so many
improvements are made, just test if you like, otherwise use at your own.
A new version will be out as soon as we discover if EMM are cause of new bugs.
Geändert von crusader1978 (30.09.09 um 12:33 Uhr) Grund: etwas hinzugefügt
It´s a from the creators of the icubuscamd.
Please ask them :-)
But the IncubusCamd 0.93-teta version works great on my Kathrein 910.
Better then the normal 0.93 version.