Nokia Kabel 2xI nach flashen Hänger bzw. nur noch Sat-Modus

[renerocker]

Hallo,
habe bei oben genannter funktionierender Box das neueste Petze geflashed. Beim Neustart bleibt die Box nun (im Display) bei Uhrzeit und den Balken für Sendungsfortschritt und Lautstärke hängen. Auf dem Fernseher ist der Radiomodus und der Hinweis "keine Kanäle" zu sehen. Schalte ich in den TV-Modus - es erscheint ebenfalls der Hinweis "keine Kanäle" - kann ich auf alle Menüs zugreifen. Gehe ich zur Kanalsuche, ist da nur die Funktion zur Sat-Kanalsuche. Gehe ich zum Umschalten von Sat auf Kabel, ist ein Reboot erforderlich. Stimme ich diesem zu, fährt die Box hoch und das Ganze beginnt von vorne.
Ich habe zum Testen ein KW-Image geflashed, hier bleibt die Box ebenfalls hängen (beim Linux-Pinguin).
Mein altes ausgelesenes Petze bringt das selbe Ergebnis wie anfangs beschrieben.
Ist das ein "altbekanntes" Problem, sprich ist irgendwas an der Box hinüber?
MfG

[renerocker]

Flashe die Sicherheitskopie welche vorher auf der DBox lief, erstelle dann ein Bootlog und poste dieses hier.

Ist das :

D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x005a0000 : "root (squashfs)"
0x005a0000-0x007e0000 : "var (jffs2)"
0x007e0000-0x00800000 : "flfs (u-boot)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.7.2 (2008-05-05 23:01:45 CEST)
Starting the automounter
event: $Id: event.c,v 1.12 2003/09/30 0538 obi Exp $
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Detected STB:
Vendor: Nokia
Model: D-BOX2
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 0534 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av: microcode verify: 4508 errors.
Machine check in kernel mode.
Caused by (from SRR1=1032): Transfer error ack signal
Oops: machine check, sig: 7
NIP: C38F612C XER: 20000000 LR: C38F611C SP: C1A55D70 REGS: c1a55cc0 TRAP: 0200
Not tainted
MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1a54000[69] 'insmod' Last syscall: 120
last math 00000000 last altivec 00000000
GPR00: 00000000 C1A55D70 C1A54000 00000001 00000039 00900000 C018C0B8 C018C0B0
GPR08: C1D05000 0000005C C3900000 C38FE000 C0160000 10082520 10060000 00000001
GPR16: 10080000 C3900000 C3900000 C3900000 C3900000 0000119C C3900000 C3900000
GPR24: 000062D8 C3900000 00000E7C 00900000 00000039 00000080 FFFFFFFF C3900BF8
Call backtrace:
00000000 C38F7208 C38F87F8 C0011108 C000285C 1002EE90 10003D00
10003D38 10003EF8 0FEB74CC 00000000
Bus error
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 0535 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 0535 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_core: masking unhandled irq reg 0 bit 6
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 1920 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 0535 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 0535 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 1722 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 0535 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 0535 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
DVB: VES1820(0): pwm=0x48
DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
Please press Enter to activate this console. Thu Jan 1 01:00:00 CET 1970
$Id: sectionsd.cpp,v 1.261 2008/05/01 18:06:46 seife Exp $
[sectionsd] Caching max 6000 events
[sectionsd] Caching 14 days
[sectionsd] Caching 6 hours Extended Text
[sectionsd] Events are old 60min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
[eitThread] pid 123 start
/var/plugins/operations camdstart
starte camd3
01.01.1970 00:00:04 camd3: BOXTYPE: dbox2
01.01.1970 00:00:04 camd3: LOG: 2
01.01.1970 00:00:04 camd3: UDP_PORT: 20248
01.01.1970 00:00:04 camd3: original slot au on
01.01.1970 00:00:04 camd3: HTTP_PORT: 9080
01.01.1970 00:00:04 camd3: DNS_CACHE: 60 sec
01.01.1970 00:00:04 camd3: DESCR_DELAY: 0 ms
01.01.1970 00:00:04 camd3: camd3.map not found
01.01.1970 00:00:05 camd3: camd3.ignore not found
01.01.1970 00:00:05 camd3: UserDB(add): USER=benutzer1 PASS=password2 FROM=any
SERVICES=all
01.01.1970 00:00:05 camd3: UserDB(add): USER=benutzer110 PASS=password10 FROM=a
ny SERVICES=1702:000000:0008,1722:000000:0008,
01.01.1970 00:00:05 camd3: original slot: CAID=1702
01.01.1970 00:00:05 camd3: UserDB(update): USER=benutzer110 PASS=password10 FRO
M=any SERVICES=1702:000000:0008,1722:000000:0008,
01.01.1970 00:00:08 camd3: KeyDB: started
01.01.1970 00:00:09 camd3: HTTP: started on port 9080
01.01.1970 00:00:09 camd3: rom120.bin -> No such file or directory
$Id: zapit.cpp,v 1.410 2008/04/25 21:23:23 houdini Exp $
[zapit] PMT update enabled
[frontend] uncommitted_switch_mode 0
avia_gt_core: masking unhandled irq reg 0 bit 7
[getservices] dup transponder id 41B onid 1
[getservices] /var/tuxbox/config/zapit/myservices.xml found.
/tmp/currentservices.xml: No such file or directory
Machine check in kernel mode.
Caused by (from SRR1=1032): Transfer error ack signal
Oops: machine check, sig: 7
NIP: C38F6098 XER: 20000000 LR: C38F6088 SP: C13BFE10 REGS: c13bfd60 TRAP: 0200
Not tainted
MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c13be000[228] 'zapit' Last syscall: 54
last math 00000000 last altivec 00000000
GPR00: 00000000 C13BFE10 C13BE000 00000001 000000E0 20006F06 00000000 C3B8C9E8
GPR08: 00000000 C38FE000 C3900000 C0004BE0 84002028 10037480 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 013BFF40 C3B8C9E8 C1AEA3C0
GPR24: C13DED80 00000001 00000000 00000000 000000E0 00000000 00000000 00000000
Call backtrace:
C003EE9C C3B8CEC0 C38D24E8 C38CD380 C00440E4 C000285C 00000000
10015234 10015304 10010BC8 10013334 0FCAB4CC 00000000
01.01.1970 00:00:13 camd3: camd v3.900 b1 - erfolgreich gestartet
$Id: controld.cpp,v 1.130 2008/01/03 11:09:27 seife Exp $
[controld] Boxtype detected: (1, Nokia D-BOX2)
Machine check in kernel mode.
Caused by (from SRR1=1032): Transfer error ack signal
Oops: machine check, sig: 7
NIP: C38F6098 XER: 00000000 LR: C38F6088 SP: C13ABDB0 REGS: c13abd00 TRAP: 0200
Not tainted
MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c13aa000[231] 'controld' Last syscall: 54
last math 00000000 last altivec 00000000
GPR00: 00000000 C13ABDB0 C13AA000 00000001 000003B0 C13ABE14 C13ABE50 C3B8C35C
GPR08: 00000000 C38FE000 C3900000 C0004BE0 84002028 10020EBC 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 013ABF40 C3B8C35C C152EDD0
GPR24: C13A5660 00000002 00000000 C13ABE14 000003B0 00000000 7FFFFD60 C13ABE50
Call backtrace:
FFFFFFFE C38F8610 C3B8C68C C38D25C8 C38CD380 C00440E4 C000285C
3000A6A8 10006530 10006D00 10006000 0FC574CC 00000000
[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[yhttpd] Webserver starting...
neutrino: /lib/libpng12.so.0: no version information available (required by neut
rino)
starting /bin/neutrino
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] Software update enabled
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[neutrino] Loading of scan settings failed. Using defaults.
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
/dev/input/event1: No such file or directory
[neutrino] menue setup
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
loading locales: scandir: No such file or directory
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[neutrino] received 0 sats
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[neutrino] registering as event client
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
[CBasicClient] connect failed.
usw.
[sectionsd] getUTC: read: Connection timed out
ein Bootlog ?

[Satfan123]

jupp so siehts aus

[renerocker]

Jetzt ist die Verwirrung komplett!
Habe gestern mit einem unguten Gefühl in der Magengegend auch auf meiner "Küchenbox" - Kokia 2xI, A500 - das Petze vom 4.11. geflashed:
Ist wunderbar hochgefahren. IP-Adresse gesetzt, alte Kanallisten per Total Commander rüber, Kanallisten geladen - alles wie gewohnt am laufen. "In Treatment" auf Fox geguckt, Image ausgelesen, zum Einkaufen gegangen.
Wieder zurück, Box eingesteckt, fährt "normal" hoch - Schock!!
Radio Modus, "Es wurden keine Kanäle gefunden". In TV Modus gewechselt: Bei Kanalsuche, wie schon bei der ersten Box, nur die Sucheinstellungen für Satsuche! Also vollkommen mutlos im Petze-Menü von Sat auf Kabel gestellt und den Reboot gemacht. Box bleibt entweder hängen oder geht in den Radio-/bzw. Sat Modus.
Habe dann die Box mit dem eingeschalteten Bootmanager gestartet, um zu sehen ob wieder diese avia-Meldung kommt. Sieht dann so aus:


DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
env: found "console" with value null
env: found "baudrate" with value 9600
env: found "dbox_duplex" with value 0
env: found "lcd_inverse" with value 0
env: found "lcd_contrast" with value 15
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 669990 bytes loaded to 0x100000
.................................................. ............. done
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 669926 Bytes = 654.2 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.36.6-dbox2 (petze@linux) (gcc version 3.4.6) #2 Di 4. Nov 23:5
6:21 CET 2008
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0,9600 dbox_duplex=0 root=/dev/mtdblock1 rootfs
type=squashfs
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30820k available (1140k kernel code, 348k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
half-duplex mode enabled
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9cd9:84
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x005a0000 : "root (squashfs)"
0x005a0000-0x007e0000 : "var (jffs2)"
0x007e0000-0x00800000 : "flfs (u-boot)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.7.2 (2008-11-04 23:40:58 CET)
Starting the automounter
event: $Id: event.c,v 1.12 2003/09/30 0538 obi Exp $
tuxbox: no IDE-Interface detected
insmod: warning: kernel-module version mismatch
/var/modules/dvb-core.o was compiled for kernel version 2.4.34-dbox2
while this kernel is version 2.4.36.6-dbox2
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Detected STB:
Vendor: Nokia
Model: D-BOX2
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 0534 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av: microcode verify: 1 errors.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.15 2007/07/29 18:14:12 papst Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 0535 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 0535 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_core: masking unhandled irq reg 0 bit 6
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 1920 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 0535 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 0535 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 1722 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 0535 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 0535 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
DVB: VES1820(0): pwm=0x48
DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
Please press Enter to activate this console. Thu Jan 1 01:00:00 CET 1970
$Id: sectionsd.cpp,v 1.273 2008/10/12 10:51:53 seife Exp $
[sectionsd] Caching max 6000 events
[sectionsd] Caching 14 days
[sectionsd] Caching 6 hours Extended Text
[sectionsd] Events are old 60min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
/var/plugins/operations camdstart
starte scam
$Id: zapit.cpp,v 1.410 2008/04/25 21:23:23 houdini Exp $
[zapit] PMT update enabled
[ConfigFile] Unable to open file /var/tuxbox/config/zapit/zapit.conf for reading
.
[frontend] uncommitted_switch_mode 0
avia_gt_core: masking unhandled irq reg 0 bit 7
[getservices] dup transponder id 41B onid 1
[getservices] /var/tuxbox/config/zapit/myservices.xml found.
/tmp/currentservices.xml: No such file or directory
$Id: controld.cpp,v 1.130 2008/01/03 11:09:27 seife Exp $
[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
[controld] format: 4:3(LB)
[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[yhttpd] Webserver starting...
neutrino: /lib/libpng12.so.0: no version information available (required by neut
rino)
starting /bin/neutrino
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] Software update enabled
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
loading locales: scandir: No such file or directory
*** glibc detected *** free(): invalid next size (normal): 0x10079698 ***
[CBasicClient] receive failed: /tmp/zapit.sock
[neutrino] registering as event client
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused

usw.


/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[sectionsd] getUTC: read: Connection timed out
[neutrino] initialized everything
[LCDFONT] FTC_Face_Requester (Fix12/Regular)
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[sectionsd] getUTC: read: Connection timed out
[CPlugins] (id,val):(end_y,555)
[CPlugins] (id,val):(end_x,668)
[CPlugins] (id,val):(off_y,23)
[CPlugins] (id,val):(off_x,37)
[CPlugins] (id,val):(video_format,2)
[CPlugins] (id,val):(fd_lcd,21)
[CPlugins] (id,val):(rcblk_rep,25)
[CPlugins] (id,val):(rcblk_anf,0)
[CPlugins] (id,val):(fd_rcinput,18)
[CPlugins] (id,val):(fd_framebuffer,3)
[CPlugins] try exec...
shellexec Version 2.44a
<Font "/share/fonts/micron_bold.ttf" loaded>boot4


Diese avia-irgendwas Meldung habe ich nicht gefunden. Was mir ins Laien-Auge sprigt ist:
insmod: warning: kernel-module version mismatch
/var/modules/dvb-core.o was compiled for kernel version 2.4.34-dbox2
while this kernel is version 2.4.36.6-dbox2

Aber ob das nun damit zu tun hat.....?