kathrein UFS 910 problem

[angel66]

Hello

i,m sorry i,m bad with writing in german.

well yesterday i have put the Sf image in the box.

problem 1....in the emergency menu i cannot shut off the receiver with the remote.
only with the button on the back.

problem 2....i dont see a ip address while booting...only 0.0.0.0
in the emergency menu i do see a ip.

problem 3....
i cannot put the addon in,after switching on the receiver the addon is gone.


can someone please help.

Remco

[alborland37]

hello,
wich version do you have?
30.06 or 10.07?
you can't turn of the kathi in emergeny boot via remote control!
that's normal that you can only turn off in this mode by pressing on/off on the back!

to your problem:
your image flashing was not completly successfull or you tried to set an ip manualy and that's wasn't successfull! for ip-changes use "ws_ftp le" (ftp-program) or totalcmd (ftp-program also) and "winvi" (editor) for example!!

you have to manually erase the ram of your kathi!
after this you can flash "emergency-kernel (orig. 1.03fw)"
and at least flash the 10.07 sf (with dhcp support) or 30.06 (static-ip)!
this might be successfull!

you can find the manual (only in german) here
on post #5

my english isn't so bad but i'm not able to translate the manual 100% to english!

you can try this at your own risk!
I'm not responsable for any damage of your kathi if that doesn't work!!

best regards...
Al

[angel66]

the files say 20.07
i erased before and installed the original and then the sf version.
i have to do that again?

how come the addon[tar] will not stick?


update....i do have a ip now with booting.

but no key file on the place stated.

[alborland37]

put the addon*.tar.bz2 to /usr/local/etc
there are 2 different addons for 30.06 and 10.07 use for your image the correct one!!!

power off/on via remote! look at the display... view seconds later it shows "installing addon", about 60 sec. later kathi finished booting!

did this work, you can see a folder called ke*s under "/usr/local"

place your autoroll.ke* and softcam.ke* there (look for it on ulc, download maybe sinske*bundle for example)

happy watching ;)

greetz...
Al

[angel66]

wait a minute.
i have to use the program dcc in the emergency menu right?
from there i cannot use the remote.

put the addon*.tar.bz2 to /usr/local/etc
there are 2 different addons for 30.06 and 10.07 use for your image the correct one!!!
power off/on via remote! look at the display... view seconds later it shows "installing addon", about 60 sec. later kathi finished booting!
did this work, you can see a folder called ke*s under "/usr/local"
place your autoroll.ke* and softcam.ke* there (look for it on ulc, download maybe sinske*bundle for example)
happy watching ;)
greetz...
Al

[angel66]

i got 1 reaction on the screen ...said uncompress addon.
later i checked the prog again and the addon was gone from the list in the receiver.


i can put in a addon while the receiver is on[not emergency menu] now.

but no luck so far.

i found 2 diff add-ons [sf site]

addon.tar

addon_20070710.tar

so i have to put bz2 behind that right?

click on usr/local and then etc....in etc i put the add-on...using right column

[alborland37]

no!
it exits a file called addon*.tar.bz2!!
this will after installation gone! thats right!!!
after "uncompressing addon" you'll find usr/local/ke*s!!!

download them, put it into folder /usr/local/etc
power off, power on via remote and so on!!
trust me it works on sf-image 10.07!!

best regards...
Al

[angel66]

i downloaded what you said.
its called addon_20070710.tar.tar
but its still there in the list..nothing happens

no!
it exits a file called addon*.tar.bz2!!
this will after installation gone! thats right!!!
after "uncompressing addon" you'll find usr/local/keys!!!
you can get the correct file from here
you have nothing to do with this file, NO renaming, NO unpacking!! the only thing you had to do is downloading and following instructions!
download them, put it into folder /usr/local/etc
power off, power on via remote and so on!!
trust me it works on sf-image 10.07!!
best regards...
Al

[alborland37]

incredible...
its called tar.bz2
i've downloaded it again an its on my pc tar.bz2!!
maybe theres something wrong with your downloader!!
put the mouse over the link and you can see the correct filename!!

try renaming from .tar.tar to tar.bz2
try again!!!
best regards...
Al

[angel66]

well my screen said decompress addon...but no keys.
i give up.
i,m off to bed.
thank you....i will check tomorrow.

incredible...
its called tar.bz2
i've downloaded it again an its on my pc tar.bz2!!
maybe theres something wrong with your downloader!!
put the mouse over the link and you can see the correct filename!!
try renaming from .tar.tar to tar.bz2
try again!!!
best regards...
Al

[angel66]

should i use a diff program?
should i try to flash the sf again?

load the addon from the SF page
rename addon_20070710.tar.tar in addon_20070710.tar.bz2, copy in /usr/local/etc/ and reboot!

[alborland37]

use for ftp: "totalcommander" or "ws_ftp le"!!
try for downloading software: "firefox" or "opera" browser!

flashfxp, filezilla didn't work correctly!!

it's important that you use the correct addon: for 30.06 image the addon 30.06, for 10.07 image addon 10.07!!! (for example: sf 30.06 + addon 10.07 didn't work!!!)

try one of these programs, if that doesn't work, try flashing again!!

all files you need for flashing are on the manual page and here (download 1-4) too!!!

if you've tried to flash sf 10.07 you have for reflashing first to erase the ram manually, then flash first the orig firmware and after this the sf again!!

(take care that german date-format: dd:mm:yy, the is the same in english-format: yy:mm:dd)

utillitis/hardware you need for this:
1. zeromodemcable, com-port on your pc/laptop
2. networkcable ("patchcable" for kathi-switch-pc or "crossover" for kathi-pc connection)
3. hyperterminal
4. tftpd32.303 from here: <klick>
5. emergeny.ub from here: <klick>
6. notfallkernel-firmware-orig.1.03 from here: <klick>
7. bootable usb-stick with fat32 formatted

greetz...
Al

[angel66]

can i flash sf over the sf?
what version of sf is better?

use for ftp: totalcommander or ws_ftp!!
flashfxp, filezilla didn't work correctly!!
it's important that you take the correct addon: for 30.06 image the addon 30.06, for 06.07 image addon 10.07!!!
try one of these programs, if that doesn't try flashing again!!
all files you need for flashing are on the manual page too!!!
greetz...
Al

[alborland37]

there only some differences beetween 30.6 and 10.07!

30.06:
static ip (192.168.1.25) , no dhcp, no dns
fast booting, fast zapping, update/downgrade via-usb-stick to 10.07 without erasing ram possible!

10.07:
static ip or dhcp (on booting you can change it to your favorite)
dns
slow booting
slower zapping
update/downgrade only possible with erasing ram

for your first experience maybe you try the 30.06 first!!

greetz...
Al

[angel66]

i have to use the notfall files after erasing?