Klappt auch nicht.
Das kommt wenn ich versuche über Hallenberg zu flashen.
ïdebug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: LCD init error -1
debug: BMon V1.3 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID http://Hallenberg.com
debug: HWrev 61 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root>
dbox2:root> seteth
ethaddr 0x1001ffe3
ethaddr: 00:50:9c:3e:1e:85
dbox2:root>
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.70, My IP 192.168.0.202
debug: Sending TFTP-request for file X/dboxifa_tmp/tftpboot/u-boot
will verify ELF image, start= 0x800000, size= 140008
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
U-Boot 1.1.6 (Tuxbox) (Jan 8 2007 - 22:58:00)
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Sagem, BMon V1.3
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.0.70; our IP address is 192.168.0.202
Filename 'X/dboxifa_tmp/tftpboot/u-boot'.
Load address: 0x100000
Loading: *Using SCC ETHERNET device
TFTP from server 192.168.0.70; our IP address is 192.168.0.202
Filename 'logo-lcd'.
Load address: 0x100000
Loading: *T T
------ Zusatzinformationen ------
Gewählter Netzwerkadapter: Realtek RTL8169/8110 Family Gigabit Ethernet NIC - Paketplaner-Miniport (0)
IP-Adresse des Netzwerkadapters: 192.168.0.70
IP-Adresse die die dbox bekommt: 192.168.0.202
Comport: Kommunikationsanschluss (COM1)
Dateiname des Images: SQUASHFS_1x.img
Imagetyp: Ein Flash
DBOX-IFA Version: 2.3
------ Powered by http://www.dboxservice-hallenberg.de ------