Problem mit boot von usb

I tried to run the installer script to boot the ufs-910 from a usb-stick (thanks kdeiss!), but kept getting the message STVOUT_NO_ENCRYPTION. It still seemed to work though (although I might have inadvertently selected the default choices at some places where I should have selected sthg different). When I now boot up the box with the usb stick in front, it does seem to load from the usb stick, but gets stuck (see hyperterminal screen dump below). Does anybody have an idea why? I'm also pretty stuck now - the box WITHOUT the usb-stick obviously doesn't boot anymore; and WITH the usb-stick I get the following ... I'd be grateful for any hints (auch auf deutsch natuerlich!!

-Stephan

Board: STb7100-mboard disk sda at scsi0, c


U-Boot 1.1.2 (STLINUX_2_0p1) (May 29 2007 - 17:22:17)
VFS: Mounted root (ext

DRAM: 32 MBreadonly.
write time out = 1, clock = 40
Freeing unused kerne
write time out = 1, clock = 40
Bumm
Flash: 16 MB run '/etc/i
In: serialt a directory
Out: serial
Err: serial
pll0 freq 531ss Enter to a
pll1 freq 399onsole.
Net: VFD_Driver Init


VFD_Controller Type : NEW Kathrein VFD
board_version = 0
Button_value = 7
Hit any key to stop autoboot: 0
## Booting image at a0040000 ...
Image Name: Linux 2.6
Image Type: SH-4 Linux Kernel Image (gzip compressed)
Data Size: 1514321 Bytes =
Starting kernel console=ttyAS0,115200 root=/dev/sda2 mem=32m bigphysarea=1024 co
processor_mem=2m@0x04000000,2m@0x04200000 rootdelay=10 - 0x00000000 - 0 ...

Linux version 2.6.11.12_stm20-33 (kdhong@linux.localdomain) (gcc version 3.4.3 (
STMicroelectronics/Linux Base 3.4.3-19) [build Mar 10 2006]) #12 Tue Feb 27 17:3
0:29 KST 2007
STMicroelectronics STb7100 Reference board initialisation
STb7100 version 3.x
Built 1 zonelists
Kernel command line: console=ttyAS0,115200 root=/dev/sda2 mem=32m bigphysarea=10
24 coprocessor_mem=2m@0x04000000,2m@0x04200000 rootdelay=10
st-coprocessor: Failed to reserve memory at 0x04000000
st-coprocessor: Failed to reserve memory at 0x04200000
PID hash table entrffers from sh_pclk value 66000000, fixing..
PLL1 : 531.00MHz
PLL2 : 399.00MHz
ST40 CPU : 265.50MHz
ST40 BUS : 132.75MHz
ST40 PER : 66.37MHz
SLIM : 265.50MHz
ST231 : 399.00MHz
STBUS : 199.50MHz
EMI : 99.75MHz
LMI : 199.50MHz
FSYN0_CHAN1 : 108.008MHz
FSYN0_CHAN2 : 36.866MHz
FSYN0_CHAN3 : 32.768MHz
FSYN1_CHAN1 : 27.002MHz
FSYN1_CHAN2 : 150.008MHz
FSYN1_CHAN3 : 27.002MHz
FSYN1_CHAN4 : 48.000MHz
CLK_PIX_HD : 108.008MHz
CLK_PIX_SD : 27.002MHz
CLK_DISP_HD : 13.501MHz
CLK_DISP_ID : 13.501MHz
CLK_GDP2 : 27.002MHz
CLK_656 : 27.002MHz
CLK_PIPE : 150.008MHz
CLK_PP : 27.002MHz
CLK_IC_150 : 150.008MHz
CLK_DAA : 32.768MHz
CLK_DSS : 36.866MHz
CLK_LPC : 46.875KHzcted firmware : 0x
CLK_BCH_HDMI : 108.008MHz

CLK_TMDS_HDMI: 27.002MHz(irq = 121) is a asc0:
CLK_PIX_HDMI : 13.501MHz


U-B
CLK_DVP : VIDINCLK) (May 29
CLK_RTC : 27.002MHz_init: check the clock
Console: colour dummy device 80x25IO 0xb8033000 (irq = 120) is a asc
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)FFFF"
io s
Memory: 25216k/32768k available (2576k kernel code, 7512k reserved, 268k data, 9l
0x002

io scheduler deadline registered serial
2k init)
remap_area_pages: address c0000000 phys 40000000 size 40009nfig FS -
Net: VFD
remap_area_pages: pmd 846e54e4nitialized: 16 RAM disks of 40
remap_area_pmd: pte 8470400
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Onboard_Flas
CPU: STb710x6 devices at
NET: Registered protocol family 16


ea=1024 coproce
SCSI subsystem initializedx04200000
usbcore: registered new driver usbfs00020000-0x00040000 : "BootConfigura
usbcore: registered new driver hubserve memory at 0x04000000
SH Virtual Bus initialized
bigphysarea: Allocated 1024 pages at 0x84748000.t_host_control: Fai
Calculated peripheral clock value 6
lirc_dev: lirc_register_plugin: sample_rate: 0bus registered, assigned bus number 1
STM LIRC plugin has IRQ 125
Lirc STM: Using IRB mode
fixing..gure
STMicroelectronics LIRC driver configured

LMI : 199
STPIO layer initialised new driver usb-storage
Device probe found data for platform device wdt
usb 1-1.4: new high sp
STM watchdog initialized
USB Mass Storage suppor
STMicroelectronics ASC driver initialized
FSYN0_CHAN3 : 32.768MHz
asc_init: check the clock entries driverYN1_CHAN1
ttyAS0 at MMIO 0xb8032000
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
flags 0001 RAM start at 0xa40000
Generic ST boards onboard flash device: 0x01000000 (16.0Mb) at 0x00000000
S
CLK_DISP_ID : 13.501MHz2-byte hdwr sectors (1011
Onboard_Flash: Found 1 x16 devices at 0x0 in 16-bit bank cop. addr 0x04000000
Onboard_Flash: Found 1 x16 devices at 0x800000 in 16-bit bankDRAM
TCP: Hash tables configured (established 2048 bind 2
Amd/Fujitsu Extended Query Table at 0x0040
remap_area_pmd: pte 8470
0x004e0000-0x00ae0000 : "APP_Modules 0xA04E.0000-0xA0AD.FFFF"mily 16
0x00ae0000-0x00c00000 : "EmergencyRoot 0xA0AE.0000-0xA0BF.FFFF"

Please append a correct "root=" boot option
0x00c00000-0x01000000 : "OtherData 0xA0C0.0000-0xA0FF.FFFF"erial000000 - 0 ..
Err: serial

0x00020000-0x00040000 : "BootConfiguration 0xA002.0000-0xA003.FFFF"
Net: VFD_Driver Initkdhong@linux.localdoma
ST40_start_host_control
VFD_Co
ST40_start_host_control proceeding
drivers/usb/host/ehci-stcore.c: ehci_hcd (ST40) at 0xb91ffe00,irq 169
Button_value = 7ctronics LIRC dr
H

ST40-ehci ST40-ehci2: new USB bus registered, assigned bus number 1
STPIO la
## Booting image at a0040000 ...
ST40-ehci ST40-ehci2: park ce probe fo
i2c /dev entries drivermem=2m@0x04000000,2m@0x
stssc layer initialized0x00000000 - 0 ... p
STMicroelectronics - Coprocessors st231 Init
RAMDISK driver
st231-0 Coprocessor -------------------------------------------
h
flags 0001 RAM start at 0xa4000000 size 0x00200000 (gcc version 3.4.3 (ds onboard flash device: 0
cop. addr 0x04000000
st231-1 Coprocessor -------------------------------------------
flags 0001 RAM start at 0xa4200000 size 0x00200000
number of CFI chips: 2: 27
cop. addr 0x04200000em=2m@0x04000000,2m@0x04200000 rootdel
Channels : Not definedkenness.CHAN3 : 27.002MH
IRQ : not used
---------------------------------------------------------------
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
NET: Registered protocol family 1
Waiting 10sec before mounting root device...
usb 1-1: new high speed USB device using ST40-ehci and address 2
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 1-1.4: new high speed USB device using ST40-ehci and address 3
scsi0 : SCSI emulation for USB Mass Storage devices
Vendor: Ut163 Model: USB2FlashStorage Rev: 0.00
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 1974271 512-byte hdwr sectors (1011 MB)
sda: assuming Write Enabled
sda: assuming drive cache: write through
SCSI device sda: 1974271 512-byte hdwr sectors (1011 MB)
sda: assuming Write Enabled
sda: assuming drive cache: write through
sda: sda1 sda2
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
ilesystem) readonly.
Freeing unused kernel memory: 92k freed
Bummer, could not run '/etc/init.d/rcS': Not a directory

Please press Enter to activate this console.

Gandy,

Dank. Ich hatte auch vor, dass zu tun. Aber ich wollte vorher doch noch mal nachfragen ob ich die soft auf der USB-stick nicht doch noch irgendwie reanimieren konnte. Uebrigens funzt jetzt ueberhaupt nichts mehr - weil ich offensichtlicht keine (oder nicht hinreichend) Spannung auf meinem LNB bekomme; und ich habe festgestellt, dass ich dann auch nit in der Konsole kommen kann via Hyperterminal. Das heisst - er LEST zwar alles, aber Ctrl-C order Ctrl-Z orde Enter kuntionieren nicht mehr.

-Stephan

Zitat:

---

Zitat von gandy

in case if something went wrong during updating/flashing your receiver and it fails to start because of missing kernel, emergency partion.. i have created an "emergency-kernel" with an embedded emergency ramdisk - so you can revive your receiver as long as you haven't killed uboot.
follow this steps:
1.) install a tftp-server (windows e.g. http://perso.orange.fr/philippe.jounin/tftpd32.html)
2.) download the "emergency-kernel" and copy "emergency.ub" to your tftp-share --> http://www.megaupload.com/de/?d=66RV985P
3.) connect the receiver through serial and network port and start the terminalapplication on the serial port
4.) power on the receiver and press immediately <enter> on the terminal, you should see the uboot prompt (STB7100-Ref>)
5.) on uboot prompt set the box ip with "set ipaddr 192.168.x.x" (you have to adapt x.x to your settings, both have to be in the same subnet)
6.) on uboot prompt set the tftp-server ip with "set serverip 192.168.x.x" (you have to adapt x.x to your settings, both have to be in the same subnet)
7.) on uboot prompt copy the kernel with "tftp a4000000 emergency.ub" into memory
8.) plugin the prepared usb-stick (you can get a full update of all partitions here --> http://www.megaupload.com/de/?d=63MJTFN9)
9.) on uboot prompt start the kernel from memory with "bootm a4000000"
now the emergency-system should boot and starting to update...
viel spass mit eurem wiederauferstandenen receiver

---