OSCAM Konfiguration mit easymouse2 und S*Y V13

Hallo Leute,
ich habe auf meinem Ubuntu OSCAM installiert. Nun benötige ich OSCAM Einstellungen, um meine S*Y V13 auslesen zu können.

Information:

easymouse2
3.3 v
phoenix
3.579mhz

oscam

oscam.server

Code:

[reader] label = s*y protocol = mouse device = /dev/ttyUSB0 caid = 09C4 detect = cd mhz = 357 cardmhz = 357 ident = 09C4:000000 group = 1 emmcache = 1,3,2

oscam.user

Code:

[account] user = local pwd = local disabled = 0 expdate = group = 1 hostname = uniq = 0 sleep = 0 monlevel = 2 au = 1 services = betatunnel = 1833.FFFF:1702 ident = cccmaxhops = 2 keepalive = 1 numusers = 0 penalty = 0

oscam.conf

Code:

[global] logfile = stdout fallbacktimeout = 2500 cachedelay = 120 nice = -1 preferlocalcards = 1 saveinithistory = 1 [dvbapi] enabled = 1 au = 1 boxtype = dreambox user = local pmt_mode = 0 [webif] httpport = 16001 httpuser = root httppwd = local httprefresh = 10 httpallowed = 127.0.0.1,0.0.0.0-255.255.255.255 httphideidleclients = 0 httpreadonly = 0 httpsavefullcfg = 0

LOG

Code:

2011/12/11 1:23:22 81Axxxx r reader s*y initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357) 2011/12/11 1:23:23 0 s*y card detected 2011/12/11 1:23:27 81xxxx r ATR: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 2011/12/11 1:23:29 81xxxx r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz 2011/12/11 1:23:30 81xxxx r [videoguard2-reader] no boxID available 2011/12/11 1:23:30 81xxxx r card system not supported 2011/12/11 1:23:30 81xxxx r Normal mode failed, reverting to Deprecated Mode 2011/12/11 1:23:35 81xxxx r ATR: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 2011/12/11 1:23:36 81xxxx r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz 2011/12/11 1:23:38 81xxxx r [videoguard2-reader] no boxID available 2011/12/11 1:23:38 81xxxx r card system not supported 2011/12/11 1:23:38 81xxxx r card initializing error

Für jede Hilfe wäre ich sehr dankbar!!

Danke im Voraus!

Grüße
godi.d

http://www.oscamconfigs.info/34/sky-...al-cardreader/

device etc ist nur noch anzupassen

Hi, danke für die Hilfe. Bekomme mit der folgenden Einstellung:

Einstellung

Code:

[reader] label = S*yDE Protocol = internal detect = CD device = /dev/ttyUSB0 Group = 1 EMMCache = 1,3,2 CAID = 09c4 ident = 09c4:000000 ecmwhitelist = 09c4@000000:46,90

folgende Meldung:

Meldung

Code:

2011/12/11 10:32:26 9DCxxxx r ERROR, you have specified 'protocol = internal' in oscam.server, 2011/12/11 10:32:26 9DCxxxx r recompile with internal reader support. 2011/12/11 10:32:26 9DCxxxx r Cannot open device: /dev/ttyUSB0 2011/12/11 10:32:26 9DCxxxx h HTTP Server listening on port 16001 2011/12/11 10:33:26 9DCxxxx r ERROR, you have specified 'protocol = internal' in oscam.server, 2011/12/11 10:33:26 9DCxxxx r recompile with internal reader support. 2011/12/11 10:33:26 9DCxxxx r Cannot open device: /dev/ttyUSB0 2011/12/11 10:34:26 9DCxxxx r ERROR, you have specified 'protocol = internal' in oscam.server, 2011/12/11 10:34:26 9DCxxxx r recompile with internal reader support. 2011/12/11 10:34:26 9DCxxxx r Cannot open device: /dev/ttyUSB0

Habe ich OSCAM falsch installiert oder ist die Einstellung falsch?

Danke im Voraus!

Grüße
godi.d

ich dacht du hast eine easymouse ?
[reader]
label = mycard
protocol = mouse
device = /dev/ttyUSB1 bzw 0 ! da muste schauen an welchem usb das ist
caid = 09c4
detect = cd
mhz = 600
cardmhz = 357
group = 1
emmcache = 1,3,2

danach system neu starten ! dann soll es gehen

Ja, ich habe eine easymouse 2. OK, dann muss es als protokoll mouse sein. Ich versuche es jetzt (Daumen drücken xD).

Leider nicht geklappt.

Log

Code:

2011/12/11 11:50:10 0 s waiting for local card init 2011/12/11 11:50:10 96Dxxxx h HTTP Server listening on port 16001 2011/12/11 11:50:13 96Cxxxx r reader s*y initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=357) 2011/12/11 11:50:13 0 s*y card detected 2011/12/11 11:50:21 96Cxxxx r Error activating card. 2011/12/11 11:50:29 96Cxxxx r Error activating card. 2011/12/11 11:50:37 96Cxxxx r Error activating card.

Hi, schreib das mal mit in die server.

Code:

BoxID = 12345678

Leider auch nicht.

Hier noch mal die komplette Log:

Code:

12:54:49 0 s log_list_thread thread started 12:54:49 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #6073 (i686-pc-linux) 12:54:49 0 s version=1.20-unstable_svn, build #6073, system=i686-pc-linux, nice=-1 12:54:49 0 s client max. idle=120 sec, debug level=0 12:54:49 0 s max. logsize=10 Kb, loghistorysize=4096 bytes 12:54:49 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms 12:54:49 0 s Cannot open file "/usr/local/etc/oscam.services" (errno=2 No such file or directory) 12:54:49 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled 12:54:49 0 s signal handling initialized (type=sysv) 12:54:49 0 s can't open file "/usr/local/etc/oscam.srvid" (err=2 No such file or directory), no service-id's loaded 12:54:49 0 s can't open file "/usr/local/etc/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded 12:54:49 0 s can't open file "/usr/local/etc/oscam.provid" (err=2 No such file or directory), no provids's loaded 12:54:49 0 s can't open file "/usr/local/etc/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded 12:54:49 0 s Starting listener 0 12:54:49 0 s monitor: disabled 12:54:49 0 s Starting listener 0 12:54:49 0 s camd35: disabled 12:54:49 0 s Starting listener 0 12:54:49 0 s cs378x: disabled 12:54:49 0 s Starting listener 0 12:54:49 0 s newcamd: disabled 12:54:49 0 s Starting listener 0 12:54:49 0 s pandora: disabled 12:54:49 0 s Starting listener 0 12:54:49 0 s radegast: disabled 12:54:49 0 s http thread started 12:54:49 0 s reader check thread started 12:54:49 0 s check thread started 12:54:49 0 s creating thread for device /dev/ttyUSB0 12:54:49 0 s loadbalancer: can't read from file /tmp/.oscam/stat 12:54:49 0 s waiting for local card init 12:54:49 9D6xxxx h HTTP Server listening on port 16001 12:54:51 9D6xxxx r reader s*y initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=357) 12:54:52 0 s*y card detected 12:55:00 9D6xxxx r Error activating card. 12:55:07 9D6xxxx r Error activating card. 12:55:15 9D6xxxx r Error activating card.

Neuer Stand:

LOG

Code:

2011/12/11 14:07:23 827C3D8 h HTTP Server listening on port 16001 2011/12/11 14:07:26 827AA50 r reader mouse initialized (device=/dev/ttyUSB1, detect=cd, mhz=600, cardmhz=600) 2011/12/11 14:07:26 0 mouse card detected 2011/12/11 14:07:31 827AA50 r ATR: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 2011/12/11 14:07:32 827AA50 r Maximum frequency for this card is formally 5 Mhz, clocking it to 6.00 Mhz 2011/12/11 14:07:33 827AA50 r card system not supported 2011/12/11 14:07:33 827AA50 r Normal mode failed, reverting to Deprecated Mode 2011/12/11 14:07:37 827AA50 r ATR: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 2011/12/11 14:07:38 827AA50 r Maximum frequency for this card is formally 5 Mhz, clocking it to 6.00 Mhz 2011/12/11 14:07:41 827AA50 r [videoguard2-reader] parental lock setting: FF FF FF FF 2011/12/11 14:07:41 827AA50 r [videoguard2-reader] type: VideoGuard *** Germany, caid: 09C4 2011/12/11 14:07:41 827AA50 r [videoguard2-reader] serial: xxxxxx, BoxID: 12345678, baseyear: 200x 2011/12/11 14:07:41 827AA50 r [videoguard2-reader] ready for requests 2011/12/11 14:07:41 827AA50 r found cardsystem videoguard2 2011/12/11 14:07:41 827AA50 r [videoguard2-reader] mouse card detected 2011/12/11 14:07:41 827AA50 r [videoguard2-reader] type: VideoGuard *** Germany 2011/12/11 14:07:41 827AA50 r [videoguard2-reader] tier: 13xx, expiry date: xxxx/0x/0x-00:xx:16 2011/12/11 14:07:41 0 s init for all local cards done 2011/12/11 14:07:41 0 s anti cascading disabled

Ist das ok oder noch nicht ganz?

Sollte eigentlich jetzt laufen.

Edit. Hmm, das ist komisch.

Code:

Maximum frequency for this card is formally 5 Mhz, clocking it to 6.00 Mhz

Zitat:

Zitat von sammy909

Sollte eigentlich jetzt laufen.

Edit. Hmm, das ist komisch.

Code:

Maximum frequency for this card is formally 5 Mhz, clocking it to 6.00 Mhz

einfach in global so abändern mhz = 500

Ich versuche gerade dem Client (Opticum HD X403p) den Server zu hinterlegen.

oscam.conf

Code:

[monitor] port = 988 nocrypt = 192.168.0.0-192.168.255.255 aulow = 120 hideclient_to = 30 monlevel = 1 appendchaninfo = 1 [newcamd] port = 34000@09c4:000000 key = 0102030405060708091011 allowed = 0.0.0.0-255.255.255.255 keepalive = 1

oscam.user

Code:

[account] user = user pwd = user au = mouse group = 1 services = s*y caid = 09c4 ident = 09c4:000000 monlevel = 2 disabled = 0 keepalive = 1

LOG

Code:

2011/12/11 15:12:57 98A6B40 c WARNING: invalid client tcp_conn_close() 2011/12/11 15:12:57 98A6B40 c anonymous disconnected from 192.168.xx.xx 2011/12/11 15:12:57 98A6B40 c thread B779xxxx ended!

Erhalte beim Client Server Close. Was kann das bedeuten bzw. wie kann ich es noch testen?

Danke im Voraus!

Grüße
godi.d

Erhalte dann:

Code:

Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz

Grüße
godi.d

easymouse2
3.3 v
phoenix
3.579mhz <----------------- auf 5 mhz stellen

Ist wie folgt eingestellt:
easymouse2
3.3 v
phoenix
3.579mhz

oder soll es auf
->Y5?

oscam.server

Code:

mhz = 500 cardmhz = 500

an der easymouse2
is glaub rechts und dann in die zweite possition

Zitat:

Zitat von zeus-crew

an der easymouse2
is glaub rechts und dann in die zweite possition

Ich habe das Gerät:
http://www.satking.de/out/pictures/z...25_pic1_z1.png