Brauche Hilfe bei CS Netzwerk
Ich brauche mal Hilfe ich bin ein Neuling bei dem Thema CS ich nutze meinen PC als ****server mit NDS Karte (Full Abo Sat) und Newcs Server 1.62 dann soll meine Kathi UFS910 HD darauf zugreifen aber irgendwie bekomme ich das nicht hin. Auf der Kathi ist das AAF 2.0 drauf und die Emus Camd3 und MGCamd kann ich auch aktivieren. Was muss ich machen und anpassen. Habe hier auch schon von den config Datein gelesen aber die finde ich bei mir nicht. Kann mir bitte jemand weiter helfen, bevor ich noch verzweifel:wallbash:
Liste der Anhänge anzeigen (Anzahl: 1)
Zitat:
Zitat von
Tomyslav
Ja in der camd3.servers wird die IP und der Port festgelegt.
Sieht dann ungefähr so aus für UDP Protokoll:
In der cam3.config brauchst Du für Kathi:
Also bei mir sieht das ganze jetzt so aus:
Das ist die XML vom server:
<?xml version="1.0"?>
<!--
For setup-issues, look in readme.txt!
If there are other troubles, try different forums or irc channels around :o)
The configfile are NOT case-sensitive, and shouldnt care about dos/unix cr/lf.
** This is the example file for Phoenix Interface on Windows.
-->
<newCSconfig>
<readers name="Phoenix">
<device>
<name>Phoenix Interface</name>
<type>phoenix</type>
<mhz>357</mhz>
<node>COM1</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<boxkey>00000000</boxkey> <!-- <rsa>0000000000</rsa> -->
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</ipk>
<ucpk>00000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<****detect>yes</****detect>
<newcamd_port>15000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
</readers>
<radegastserver>
<enabled>No</enabled>
<port>16000</port>
<allow>
<hostname>localhost</hostname>
</allow>
</radegastserver>
<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
<debug>
<password>NewCSpwd</password>
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<tcp_port>1001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>dummy</name>
<password>dummy</password>
<hostname>localhost</hostname>
<port>12000</port>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
<rate>2</rate>
</user>
</newcamdserver>
</newCSconfig>
Das ist die Kathi config
my config:
--------------------
# Wenn Parameter gebraucht wird - '#' (Kommentarzeichen) entfernen und eure Werte reinsetzen!!!!!
#
#
#
# Boxtyp(optional): 1-dbox2, 2-dm7000, 3-dm7020, 4-dm500,
# 5-dm56xx/Triax, 7-elanvision, 9-server only, 10-relook, 11-dm600
# 12-ufs910
# Default is 9 - server only
BOXTYPE=12
#
# UDP Port(optional); Defailt - 20248
UDP_PORT=20248
# UDP Host(optional); Defailt - any
#UDP_HOST=192.168.0.3
# HTTP Port(optional); Defailt - 9080 ( 0: HTTP-server ausgeschaltet)
#HTTP_PORT=9080
# HOST Host(optional); Defailt - any
#HOST_HOST=192.168.0.3
# HTTP Login: Default - admin:camd3
#HTTP_ADMIN=admin
#HTTP_PASSWORD=camd3
# Log(optional): 0 - keine Ausgaben, 1-Datei, 2 - Console, 4 - UDP(syslog), 3 - Console+Datei, 5 - UDP+Datei, 6 - UDP+Console, 7-UDP+Console+Datei; Default ist 2;
#LOG=2
# Host für UDP-logging
#LOG_HOST=192.168.0.3
# Port für UDP-logging(optional); Default ist 514
#LOG_PORT=514
# DNS cache in sekunden; Default ist 60 sec
#DNS_CACHE=60
# Logfile
#LOG_FILE=/mnt/hdd/var/log/camd3.log
# AU für original Slot dbox2 (optional): 1-ein, 0-aus; Default ist 1
#DBOX2_AU=0
# Pfad zum User-File(optional); Default ist /var/keys/camd3.users
#USERS=/var/keys/camd3.users
# Pfad zum Server-File(optional); Default ist /var/keys/camd3.servers
#SERVERS=/var/keys/camd3.servers
# Pfad zum Key-File(optional); Default ist /var/keys/camd3.keys
#KEYS=/var/keys/camd3.keys
# Pfad zum Socket-File(optional); Default ist /tmp/camd.socket
#SOCKET=/tmp/camd.socket
# Kartenslots (anzahl beliebig)
# je eine Zeile für Slot:
# SLOT=devicename:type:au_g:au_s:au_u:port:username: password(****detect):deskey
#
# deskey für normale Slots ist optional, aber port,username und password müssen immer angegeben werden!!!
#
# für die Kartenleser(aber nicht multicam für dbox2) statt password, CTS oder CAR eingeben (****detect - default - CAR)
#
# devicename: Pfad (volständig) zum Device, oder Hostname von ****server(newcamd) - /dev/ttyS0...9 für win32-version
# type: 1-serial, 2-intern(dreambox, elanvision, tripledragon), 4-****server(newcamd)
# au_g: 1-eingeschaltet, 0-ausgeschaltet
# au_s: 1-eingeschaltet, 0-ausgeschaltet
# au_u: 1-eingeschaltet, 0-ausgeschaltet
# port: port
# username: loginname
# password: loginpassword
# deskey: ****server deskey (14 byte)
#SLOT=/dev/tts/0:1:1:1:1:997:com1:CAR
#SLOT=/dev/ttyS0:1:1:1:1:997:com1:CTS
#SLOT=/dev/sci0:2:1:1:1:999:slotunten:password3
#SLOT=/dev/sci1:2:1:1:1:998:slotoben:password2
#SLOT=localhost:4:1:1:1:22222:dummy:dummy:01020304 05060708091011121314
#SLOT=/dev/****reader1:2:1:1:1:998:slotoben:password2
Das ist die Kathi servers:
cs357x://dummy:dummy@192.168.0.3:15000
Und als Anhang das was mein Server am PC anzeigt. Die Users Datei brauche ich doch nicht oder weil die Kathi ja nicht als Server läuft, oder?