Hallo Leute,
habe mal eine Frage?
Ist es möglich den MasterCRD2 an die Dbox2 anzuschließen und HD+ CS zu betreiben?
Druckbare Version
Hallo Leute,
habe mal eine Frage?
Ist es möglich den MasterCRD2 an die Dbox2 anzuschließen und HD+ CS zu betreiben?
Ja warum nicht?!
Mit oscam auf jeden Fall... :Lieb Streicheln:
Zitat:
Zitat von Stummi08/15
Wie sollten die config`s dann aussehen?
Meine sehen so aus und ich bekomme es nicht hin mit dem MaserCRD und Oscam!
#
# reader configuration
#
# serial reader
[reader]
label = sky
Protocol = mouse
detect = CD
device = /dev/tts/1
group = 1
emmcache = 1,3,15
mhz = 600
cardmhz = 600
deprecated = 0
Ident = 1702:000000
CAID = 1702
AU = 1
[reader]
label = hdplus
Protocol = mouse
detect = CD
device = /dev/tts/0
group = 2
emmcache = 1,3,15
n3_rsakey = BFxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxD5
n3_boxkey = A7xxxxxxxxxxxxxxxx7C
mhz = 358
cardmhz = 368
CAID = 1830
Ident = 1830:003411
Services = HDplus
AU = 1
Hi,
könnte bitte mal einer schauen,ob S*y mit HD+ soweit i.O.ist?
Würde sehr dankbar sein.
Oscam Log mit Webinterface Log:
Oscam Log:MD-Image - Nokia D-BOX2 - Kernel 2.4.37-dbox2 (09:39:56)...
dbox login: root
BusyBox v1.7.2 (2009-05-01 23:27:13 CEST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
/var # oscam
Warning: keyword 'level' in global section not recognized
Warning: keyword 'port' in webif section not recognized
2010/05/28 9:40:06 1030 s >> OSCam << cardserver started version 0.99.4svn
, build #2340 (powerpc-tuxbox-linux)
2010/05/28 9:40:06 1030 s version=0.99.4svn, build #2340, system=powerpc-tu
xbox-linux, nice=-1
2010/05/28 9:40:06 1030 s max. clients=29, client max. idle=120 sec
2010/05/28 9:40:06 1030 s max. logsize=102400 Kb
2010/05/28 9:40:06 1030 s client timeout=5000 ms, fallback timeout=2000 ms,
cache delay=120 ms
2010/05/28 9:40:06 1030 s shared memory initialized (size=492830, fd=3)
2010/05/28 9:40:06 1030 s auth size=4756
2010/05/28 9:40:06 1030 s services reloaded: 0 services freed, 3 services l
oaded
Warning: keyword 'au' in reader section not recognized
Warning: keyword 'au' in reader section not recognized
2010/05/28 9:40:07 1030 s userdb reloaded: 0 accounts freed, 4 accounts loa
ded, 0 expired, 0 disabled
2010/05/28 9:40:07 1030 s signal handling initialized (type=sysv)
2010/05/28 9:40:07 1030 s oscam.srvid loading failed, old format
2010/05/28 9:40:07 1030 s 1 provid's loaded
2010/05/28 9:40:07 1030 s 1 lengths for caid guessing loaded
2010/05/28 9:40:07 1030 s monitor: initialized (fd=6, port=988)
2010/05/28 9:40:07 1030 s camd 3.3x: disabled
2010/05/28 9:40:07 1030 s camd 3.5x: disabled
2010/05/28 9:40:07 1030 s cs378x: disabled
2010/05/28 9:40:07 1030 s newcamd: initialized (fd=7, port=34030, crypted)
2010/05/28 9:40:07 1030 s CAID: 1702
2010/05/28 9:40:07 1030 s provid #0: 000000
2010/05/28 9:40:07 1030 s newcamd: initialized (fd=8, port=34000, crypted)
2010/05/28 9:40:07 1030 s CAID: 1830
2010/05/28 9:40:07 1030 s provid #0: 003411
2010/05/28 9:40:07 1030 s provid #1: 008011
2010/05/28 9:40:07 1030 s cccam: disabled
2010/05/28 9:40:07 1030 s radegast: disabled
2010/05/28 9:40:07 1030 s logger started (pid=1035)
2010/05/28 9:40:07 1030 s resolver thread started
2010/05/28 9:40:07 1030 s http started (pid=1038)
2010/05/28 9:40:07 1038 h HTTP Server listening on port 8080
2010/05/28 9:40:07 1030 s reader started (pid=1039, device=/dev/tts/1, dete
ct=cd, mhz=600, cardmhz=600)
2010/05/28 9:40:07 1030 s reader started (pid=1040, device=/dev/tts/0, dete
ct=cd, mhz=368, cardmhz=368)
2010/05/28 9:40:07 1030 s waiting for local card init
2010/05/28 9:40:10 1039 r02 card detected
2010/05/28 9:40:10 1040 r03 card detected
2010/05/28 9:40:15 1039 r02 ATR: 3B xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxD
2010/05/28 9:40:15 1040 r03 ATR: 3F xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx63
2010/05/28 9:40:16 1039 r02 Maximum frequency for this card is formally 6 Mhz
, clocking it to 6.00 Mhz
2010/05/28 9:40:17 1039 r02 detect Irdeto tunneled NAGRA card
2010/05/28 9:40:17 1039 r02 switching back to Irdeto mode
2010/05/28 9:40:17 1039 r02 detect Irdeto card
2010/05/28 9:40:17 1040 r03 Maximum frequency for this card is formally 5 Mhz
, clocking it to 3.68 Mhz
2010/05/28 9:40:17 1039 r02 caid: 1702, acs: 3.84
2010/05/28 9:40:17 1039 r02 ascii serial: 027xxxxxxx, hex serial: 75xxxx, hex
base: 1A
2010/05/28 9:40:18 1040 r03 detect native NAGRA card T1 protocol
2010/05/28 9:40:20 1039 r02 providers: 2 (000000,000000)
2010/05/28 9:40:21 1039 r02 provider: 2, id: 000000
2010/05/28 9:40:21 1039 r02 chid: 05DF, date: 2009/10/26 - 2010/07/07
2010/05/28 9:40:21 1039 r02 chid: 7D23, date: 2009/08/07 - 2010/04/18
2010/05/28 9:40:21 1039 r02 chid: 0276, date: 2009/10/26 - 2010/07/07
2010/05/28 9:40:21 1039 r02 chid: 000F, date: 2009/08/07 - 2010/04/18
2010/05/28 9:40:21 1039 r02 chid: 04CE, date: 2009/05/07 - 2010/01/16
2010/05/28 9:40:21 1039 r02 chid: 029D, date: 2008/01/19 - 2008/01/21
2010/05/28 9:40:21 1039 r02 chid: 05FB, date: 2009/10/26 - 2010/07/07
2010/05/28 9:40:21 1039 r02 chid: 05E7, date: 2009/10/26 - 2010/07/07
2010/05/28 9:40:21 1039 r02 chid: 05DE, date: 2009/10/26 - 2010/07/07
2010/05/28 9:40:21 1039 r02 chid: 05E8, date: 2009/10/26 - 2010/07/07
2010/05/28 9:40:21 1039 r02 chid: 05DD, date: 2009/10/26 - 2010/07/07
2010/05/28 9:40:21 1039 r02 chid: 0605, date: 2009/10/26 - 2010/07/07
2010/05/28 9:40:21 1039 r02 chid: 05F1, date: 2009/10/26 - 2010/07/07
2010/05/28 9:40:21 1039 r02 chid: 7D27, date: 2009/08/07 - 2010/04/18
2010/05/28 9:40:21 1039 r02 chid: 00F0, date: 2009/05/07 - 2010/01/16
2010/05/28 9:40:21 1039 r02 chid: 0102, date: 2008/01/19 - 2008/01/21
2010/05/28 9:40:21 1039 r02 chid: 028B, date: 2008/01/19 - 2008/01/21
2010/05/28 9:40:21 1039 r02 chid: 028C, date: 2008/01/19 - 2008/01/21
2010/05/28 9:40:21 1039 r02 chid: 028D, date: 2008/01/19 - 2008/01/21
2010/05/28 9:40:21 1039 r02 chid: 028E, date: 2008/01/19 - 2008/01/21
2010/05/28 9:40:21 1039 r02 chid: 028F, date: 2008/01/19 - 2008/01/21
2010/05/28 9:40:21 1039 r02 chid: 0290, date: 2008/01/19 - 2008/01/21
2010/05/28 9:40:21 1039 r02 chid: 029E, date: 2008/01/19 - 2008/01/21
2010/05/28 9:40:21 1039 r02 chid: 0291, date: 2008/01/19 - 2008/01/21
2010/05/28 9:40:21 1039 r02 chid: 0292, date: 2008/01/19 - 2008/01/21
2010/05/28 9:40:21 1040 r03 -----------------------------------------
2010/05/28 9:40:21 1040 r03 |id |tier |valid from |valid to |
2010/05/28 9:40:21 1040 r03 +----+--------+------------+------------+
2010/05/28 9:40:21 1039 r02 chid: 0293, date: 2008/01/19 - 2008/01/21
2010/05/28 9:40:21 1039 r02 chid: 0294, date: 2008/01/19 - 2008/01/21
2010/05/28 9:40:21 1039 r02 chid: 0295, date: 2008/01/19 - 2008/01/21
2010/05/28 9:40:21 1039 r02 chid: 0298, date: 2008/01/19 - 2008/01/21
2010/05/28 9:40:21 1039 r02 chid: 0299, date: 2008/01/19 - 2008/01/21
2010/05/28 9:40:21 1040 r03 |8011|0064 |2010/02/15 |2011/02/16 |
2010/05/28 9:40:22 1040 r03 |8011|0065 |1992/01/01 |1993/01/01 |
2010/05/28 9:40:22 1039 r02 chid: 029A, date: 2008/01/19 - 2008/01/21
2010/05/28 9:40:22 1039 r02 chid: 029B, date: 2008/01/19 - 2008/01/21
2010/05/28 9:40:22 1039 r02 chid: 029C, date: 2008/01/19 - 2008/01/21
2010/05/28 9:40:22 1039 r02 chid: 0103, date: 2008/01/19 - 2008/01/21
2010/05/28 9:40:22 1039 r02 chid: 029C, date: 2008/01/19 - 2008/01/21
2010/05/28 9:40:22 1039 r02 chid: 0104, date: 2008/01/19 - 2008/01/21
2010/05/28 9:40:22 1039 r02 chid: 0406, date: 2008/01/19 - 2008/01/21
2010/05/28 9:40:22 1039 r02 chid: 0105, date: 2008/01/19 - 2008/01/21
2010/05/28 9:40:22 1039 r02 chid: 0004, date: 2008/01/19 - 2008/01/21
2010/05/28 9:40:22 1040 r03 -----------------------------------------
2010/05/28 9:40:22 1039 r02 [irdeto-reader] ready for requests
2010/05/28 9:40:23 1040 r03 ROM: D N A S P 1 4 2
2010/05/28 9:40:23 1040 r03 REV: R e v G C 4
2010/05/28 9:40:23 1040 r03 SER: 4xxxxxx3
2010/05/28 9:40:23 1040 r03 CAID: 1830
2010/05/28 9:40:23 1040 r03 Prv.ID: 00 00 34 11 (sysid)
2010/05/28 9:40:23 1040 r03 Prv.ID: 00 00 00 00
2010/05/28 9:40:23 1040 r03 Prv.ID: 00 00 80 11
2010/05/28 9:40:23 1040 r03 [nagra-reader] ready for requests
2010/05/28 9:40:23 1030 s init for all local cards done
2010/05/28 9:40:23 1030 s anti cascading disabled
2010/05/28 9:40:23 1030 s dvbapi disabled
2010/05/28 9:40:23 1030 s client(1) connect from 192.168.178.27 (pid=1073,
pipfd=17)
2010/05/28 9:40:23 1030 s client(2) connect from 192.168.178.27 (pid=1074,
pipfd=18)
2010/05/28 9:40:23 1073 c01 Connection closed to client
2010/05/28 9:40:23 1074 c02 Connection closed to client
2010/05/28 9:40:28 1030 s client(1) connect from 192.168.178.27 (pid=1085,
pipfd=17)
2010/05/28 9:40:28 1085 c01 encrypted newcamd:34000-client 192.168.178.27 gra
nted (server, au(auto)=hdplus)
2010/05/28 9:40:28 1085 c01 user server authenticated successfully (CCcam)
2010/05/28 9:40:28 1085 c01 AU enabled for user server on reader hdplus
2010/05/28 9:40:31 1030 s client(2) connect from 192.168.178.27 (pid=1092,
pipfd=18)
2010/05/28 9:40:32 1092 c02 encrypted newcamd:34030-client 192.168.178.27 gra
nted (server, au(auto)=sky)
2010/05/28 9:40:32 1092 c02 user server authenticated successfully (CCcam)
2010/05/28 9:40:32 1092 c02 AU enabled for user server on reader sky
2010/05/28 9:41:06 1092 c02 server (1702&000000/000A/93:AE85): found (622 ms)
by sky
2010/05/28 9:41:10 1092 c02 server (1702&000000/000A/93:EDB0): found (578 ms)
by sky
2010/05/28 9:41:17 1092 c02 server (1702&000000/000A/93:5FEA): found (604 ms)
by sky
2010/05/28 9:41:24 1092 c02 server (1702&000000/000A/93:FDB7): found (614 ms)
by sky
2010/05/28 9:41:31 1092 c02 server (1702&000000/000A/93:D7CB): found (607 ms)
by sky
2010/05/28 9:41:38 1092 c02 server (1702&000000/000A/93:B495): found (580 ms)
by sky
2010/05/28 9:41:45 1092 c02 server (1702&000000/000A/93:630C): found (609 ms)
by sky
2010/05/28 9:41:48 1039 r02 server emmtype=shared, len=139, idx=0, cnt=1: wri
tten (657 ms) by sky
2010/05/28 9:41:52 1092 c02 server (1702&000000/000A/93:164B): found (590 ms)
by sky
Webinterface Log:
Start: 28.05.10 / 09:40:06
UpTime: 00:06:29 OSCAM 0.99.4svn build #2340
STATUS CONFIGURATION READERS USERS SERVICES FILES SCRIPT SHUTDOWN
Show idle clients Hide idle clients Show hidden clients
hide PID Type ID Label AU Crypted Address Port Protocol Login Date Login Time Online CAID:SRVID Current Channel Idle Status
1030 s 0 root 0 0 127.0.0.1 0 server 28.05.10 09:40:06 00:06:29 0000:0000 00:00:04 OK
1035 l 0 root 0 0 127.0.0.1 0 logger 28.05.10 09:40:07 00:06:28 0000:0000 00:06:28 OK
1038 h 1 root 0 0 127.0.0.1 0 monitor 28.05.10 09:40:07 00:06:28 0000:0000 00:00:00 OK
1039 r 2 sky 1 0 127.0.0.1 0 dbox COM2 28.05.10 09:40:07 00:06:28 1702:000A 00:00:04 CARDOK
1040 r 3 hdplus -2 0 127.0.0.1 0 dbox COM1 28.05.10 09:40:07 00:06:28 0000:0000 00:06:12 CARDOK
1085 c 1 server -2 1 192.168.178.27 1150 newcamd 28.05.10 09:40:28 00:06:07 FFFE:FFFE 00:01:05 OK
1092 c 2 server 1 1 192.168.178.27 1151 newcamd 28.05.10 09:40:31 00:06:04 1702:000A 00:00:04 OK
1283 c 3 server3 -1 1 192.168.178.30 4561 newcamd 28.05.10 09:42:07 00:04:28 FFFE:FFFE 00:04:27 OK
2010/05/28 9:43:30 1092 c02 server (1702&000000/000A/93:AE8D): found (582 ms) by sky
2010/05/28 9:44:11 1092 c02 server (1702&000000/000A/93:7D2C): found (592 ms) by sky
2010/05/28 9:44:12 1092 c02 server (1702&000000/000A/93:B2AE): found (597 ms) by sky
2010/05/28 9:44:18 1092 c02 server (1702&000000/000A/93:556A): found (599 ms) by sky
2010/05/28 9:44:25 1092 c02 server (1702&000000/000A/93:6405): found (576 ms) by sky
2010/05/28 9:44:32 1092 c02 server (1702&000000/000A/93:558C): found (591 ms) by sky
2010/05/28 9:44:38 1039 r02 server emmtype=shared, len=139, idx=2, cnt=1: written (680 ms) by sky
2010/05/28 9:44:39 1092 c02 server (1702&000000/000A/93:B6DC): found (595 ms) by sky
2010/05/28 9:44:46 1092 c02 server (1702&000000/000A/93:0F15): found (588 ms) by sky
2010/05/28 9:44:54 1092 c02 server (1702&000000/000A/93:30FB): found (580 ms) by sky
2010/05/28 9:45:00 1092 c02 server (1702&000000/000A/93:71EA): found (584 ms) by sky
2010/05/28 9:45:07 1092 c02 server (1702&000000/000A/93:DEE8): found (588 ms) by sky
2010/05/28 9:45:14 1092 c02 server (1702&000000/000A/93:04EC): found (584 ms) by sky
2010/05/28 9:45:20 1039 r02 server emmtype=global, len=137, idx=3, cnt=1: written (579 ms) by sky
2010/05/28 9:45:21 1092 c02 server (1702&000000/000A/93:57C3): found (628 ms) by sky
2010/05/28 9:45:24 1039 r02 server emmtype=global, len=137, idx=4, cnt=1: written (573 ms) by sky
2010/05/28 9:45:28 1092 c02 server (1702&000000/000A/93:9EEA): found (612 ms) by sky
2010/05/28 9:45:35 1092 c02 server (1702&000000/000A/93:9108): found (594 ms) by sky
2010/05/28 9:45:40 1039 r02 server emmtype=shared, len=139, idx=5, cnt=1: written (576 ms) by sky
2010/05/28 9:45:42 1092 c02 server (1702&000000/000A/93:FB45): found (599 ms) by sky
2010/05/28 9:45:49 1092 c02 server (1702&000000/000A/93:DE9B): found (585 ms) by sky
2010/05/28 9:45:56 1092 c02 server (1702&000000/000A/93:2992): found (580 ms) by sky
2010/05/28 9:46:03 1092 c02 server (1702&000000/000A/93:5057): found (604 ms) by sky
2010/05/28 9:46:10 1092 c02 server (1702&000000/000A/93:6F19): found (609 ms) by sky
2010/05/28 9:46:17 1092 c02 server (1702&000000/000A/93:91E1): found (582 ms) by sky
2010/05/28 9:46:24 1092 c02 server (1702&000000/000A/93:0E31): found (591 ms) by sky
2010/05/28 9:46:31 1092 c02 server (1702&000000/000A/93:D6F6): found (610 ms) by sky
Switch Debug from 0 to 0 1 2 4 8 16 32 64 255
--------------------------------------------------------------------------------
OSCAM Webinterface developed by Streamboard Team - 28.05.10 09:46:35 | Access from 192.168.178.22
embedded Style by Eneen
2010/05/28 9:40:07 1030 s provid #0: 003411
2010/05/28 9:40:07 1030 s provid #1: 008011
Du hast wohl in deine newcamd Line in der oscam.conf die Provider ID ´s für HD+ un d Sky eingetragen, das muss nicht sein! Deswegen wird das wohl nicht gehen!
Trage mal folgendes in deine oscam.conf im Bereich [newcamd] ein:
port = 34030@1702:000000;34000@1830:000000
keepalive = 1
Und in der oscam.server kannst die ident = Einträge auch löschen, werden nicht gebraucht!
Denke dann könnte es laufen, erkannt und ausgelesen werden beide Karten!
Danke Reus1972.
Habe es mal so umgestellt,wie du es gesagt hast.Aber irgendwie gehen die Sender von S*y HD und die HD+ noch nicht.
Woran könnte das liegen?
Log vom Webinterface:
Start: 28.05.10 / 09:40:06
UpTime: 01:02:46 OSCAM 0.99.4svn build #2340
STATUS CONFIGURATION READERS USERS SERVICES FILES SCRIPT SHUTDOWN
Show idle clients Hide idle clients Show hidden clients
hide PID Type ID Label AU Crypted Address Port Protocol Login Date Login Time Online CAID:SRVID Current Channel Idle Status
1030 s 0 root 0 0 127.0.0.1 0 server 28.05.10 09:40:06 01:02:46 0000:0000 00:00:06 OK
1035 l 0 root 0 0 127.0.0.1 0 logger 28.05.10 09:40:07 01:02:45 0000:0000 01:02:45 OK
1038 h 1 root 0 0 127.0.0.1 0 monitor 28.05.10 09:40:07 01:02:45 0000:0000 00:00:00 OK
1039 r 2 sky 1 0 127.0.0.1 0 dbox COM2 28.05.10 09:40:07 01:02:45 1702:0044 00:00:00 CARDOK
1040 r 3 hdplus -2 0 127.0.0.1 0 dbox COM1 28.05.10 09:40:07 01:02:45 0000:0000 01:02:29 CARDOK
1085 c 1 server 0 1 192.168.178.27 1150 newcamd 28.05.10 09:40:28 01:02:24 FFFE:FFFE 00:00:41 OK
1092 c 2 server 0 1 192.168.178.27 1151 newcamd 28.05.10 09:40:31 01:02:21 1702:000B 00:00:00 OK
8054 c 3 server3 -2 1 192.168.178.30 4097 newcamd 28.05.10 10:39:04 00:03:48 FFFE:FFFE 00:03:48 OK
2012 c 4 server2 0 1 192.168.178.29 4764 newcamd 28.05.10 09:48:15 00:54:37 FFFE:FFFE 00:54:37 OK
2013 c 5 server2 0 1 192.168.178.29 3355 newcamd 28.05.10 09:48:15 00:54:37 FFFE:FFFE 00:54:37 OK
8062 c 6 server3 -1 1 192.168.178.30 4127 newcamd 28.05.10 10:39:08 00:03:44 1702:0044 00:00:01 OK
2010/05/28 10:40:32 1092 c02 server (1702&000000/000B/93:06D5): found (588 ms) by sky
2010/05/28 10:40:33 8062 c06 server3 (1702&000000/0044/93:0FEF): found (1215 ms) by sky
2010/05/28 10:40:39 1092 c02 server (1702&000000/000B/93:D41A): found (631 ms) by sky
2010/05/28 10:40:46 1092 c02 server (1702&000000/000B/93:16BB): found (599 ms) by sky
2010/05/28 10:40:53 1092 c02 server (1702&000000/000B/93:4D77): found (597 ms) by sky
2010/05/28 10:41:00 1092 c02 server (1702&000000/000B/93:FCB5): found (601 ms) by sky
2010/05/28 10:41:07 1092 c02 server (1702&000000/000B/93:30D0): found (583 ms) by sky
2010/05/28 10:41:14 1092 c02 server (1702&000000/000B/93:61A3): found (587 ms) by sky
2010/05/28 10:41:21 1092 c02 server (1702&000000/000B/93:AC06): found (598 ms) by sky
2010/05/28 10:41:28 1092 c02 server (1702&000000/000B/93:E309): found (588 ms) by sky
2010/05/28 10:41:35 1092 c02 server (1702&000000/000B/93:2C71): found (594 ms) by sky
2010/05/28 10:41:43 1092 c02 server (1702&000000/000B/93:0B66): found (610 ms) by sky
2010/05/28 10:41:49 1092 c02 server (1702&000000/000B/93:31B6): found (579 ms) by sky
2010/05/28 10:41:57 1092 c02 server (1702&000000/000B/93:7A61): found (595 ms) by sky
2010/05/28 10:42:03 1092 c02 server (1702&000000/000B/93:5CE0): found (594 ms) by sky
2010/05/28 10:42:10 1092 c02 server (1702&000000/000B/93:554A): found (580 ms) by sky
2010/05/28 10:42:13 8062 c06 server3 (1702&000000/0044/93:BD0D): found (609 ms) by sky
2010/05/28 10:42:17 1092 c02 server (1702&000000/000B/93:8385): found (635 ms) by sky
2010/05/28 10:42:24 1092 c02 server (1702&000000/000B/93:0EF3): found (596 ms) by sky
2010/05/28 10:42:25 8062 c06 server3 (1702&000000/0044/93:7299): found (601 ms) by sky
2010/05/28 10:42:31 1092 c02 server (1702&000000/000B/93:1071): found (635 ms) by sky
2010/05/28 10:42:32 8062 c06 server3 (1702&000000/0044/93:6002): found (1230 ms) by sky
2010/05/28 10:42:38 1092 c02 server (1702&000000/000B/93:7EB1): found (621 ms) by sky
2010/05/28 10:42:39 8062 c06 server3 (1702&000000/0044/93:6415): found (1198 ms) by sky
2010/05/28 10:42:45 8062 c06 server3 (1702&000000/0044/93:9916): found (597 ms) by sky
2010/05/28 10:42:46 1092 c02 server (1702&000000/000B/93:7ED9): found (985 ms) by sky
2010/05/28 10:42:52 8062 c06 server3 (1702&000000/0044/93:6039): found (649 ms) by sky
Switch Debug from 0 to 0 1 2 4 8 16 32 64 255
--------------------------------------------------------------------------------
OSCAM Webinterface developed by Streamboard Team - 28.05.10 10:42:52 | Access from 192.168.178.22
embedded Style by Eneen
Poste mal deine kompletten Einstellungen, inklusive der Daten aus den Client Boxen.
So wie ich das sehe kommt von den Clients nur Sky an, HD+ scheint von den Clients gar nicht an den Server zu gehen!
Hier meine Configs:
MD-Image - Nokia D-BOX2 - Kernel 2.4.37-dbox2 (12:50:03)...
dbox login: root
BusyBox v1.7.2 (2009-05-01 23:27:13 CEST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
/var # oscam
Warning: keyword 'level' in global section not recognized
Warning: keyword 'port' in webif section not recognized
2010/05/28 12:50:09 3524 s >> OSCam << cardserver started version 0.99.4svn
, build #2340 (powerpc-tuxbox-linux)
2010/05/28 12:50:09 3524 s version=0.99.4svn, build #2340, system=powerpc-tu
xbox-linux, nice=-1
2010/05/28 12:50:09 3524 s max. clients=29, client max. idle=120 sec
2010/05/28 12:50:09 3524 s max. logsize=102400 Kb
2010/05/28 12:50:09 3524 s client timeout=5000 ms, fallback timeout=2000 ms,
cache delay=120 ms
2010/05/28 12:50:09 3524 s shared memory initialized (size=492830, fd=3)
2010/05/28 12:50:09 3524 s auth size=4756
2010/05/28 12:50:09 3524 s services reloaded: 0 services freed, 3 services l
oaded
Warning: keyword 'au' in reader section not recognized
Warning: keyword 'au' in reader section not recognized
2010/05/28 12:50:09 3524 s userdb reloaded: 0 accounts freed, 4 accounts loa
ded, 0 expired, 0 disabled
2010/05/28 12:50:09 3524 s signal handling initialized (type=sysv)
2010/05/28 12:50:09 3524 s oscam.srvid loading failed, old format
2010/05/28 12:50:09 3524 s 1 provid's loaded
2010/05/28 12:50:09 3524 s 1 lengths for caid guessing loaded
2010/05/28 12:50:09 3524 s monitor: initialized (fd=6, port=988)
2010/05/28 12:50:09 3524 s camd 3.3x: disabled
2010/05/28 12:50:09 3524 s camd 3.5x: disabled
2010/05/28 12:50:09 3524 s cs378x: disabled
2010/05/28 12:50:09 3524 s newcamd: initialized (fd=7, port=34030, crypted)
2010/05/28 12:50:09 3524 s CAID: 1702
2010/05/28 12:50:09 3524 s provid #0: 000000
2010/05/28 12:50:09 3524 s newcamd: initialized (fd=8, port=34000, crypted)
2010/05/28 12:50:09 3524 s CAID: 1830
2010/05/28 12:50:09 3524 s provid #0: 000000
2010/05/28 12:50:09 3524 s cccam: disabled
2010/05/28 12:50:09 3524 s radegast: disabled
2010/05/28 12:50:09 3524 s logger started (pid=3527)
2010/05/28 12:50:09 3524 s resolver thread started
2010/05/28 12:50:09 3524 s http started (pid=3530)
2010/05/28 12:50:09 3524 s reader started (pid=3531, device=/dev/tts/1, dete
ct=cd, mhz=600, cardmhz=600)
2010/05/28 12:50:09 3530 h HTTP Server listening on port 8080
2010/05/28 12:50:09 3524 s reader started (pid=3532, device=/dev/tts/0, dete
ct=cd, mhz=368, cardmhz=368)
2010/05/28 12:50:09 3524 s waiting for local card init
2010/05/28 12:50:11 3531 r02 card detected
2010/05/28 12:50:11 3532 r03 card detected
2010/05/28 12:50:16 3531 r02 ATR: 3xxxxxxxxxxxxx 2010/05/28 12:50:17 3532 r03 ATR: 3xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx63
2010/05/28 12:50:17 3531 r02 Maximum frequency for this card is formally 6 Mhz
, clocking it to 6.00 Mhz
2010/05/28 12:50:18 3531 r02 detect Irdeto tunneled NAGRA card
2010/05/28 12:50:18 3531 r02 switching back to Irdeto mode
2010/05/28 12:50:18 3531 r02 detect Irdeto card
2010/05/28 12:50:18 3532 r03 Maximum frequency for this card is formally 5 Mhz
, clocking it to 3.68 Mhz
2010/05/28 12:50:18 3531 r02 caid: 1702, acs: 3.84
2010/05/28 12:50:18 3531 r02 ascii serial: 02xxxxxx4, hex serial: 7xxxxxC, hex
base: 1A
2010/05/28 12:50:19 3532 r03 detect native NAGRA card T1 protocol
2010/05/28 12:50:20 3532 r03 -----------------------------------------
2010/05/28 12:50:20 3532 r03 |id |tier |valid from |valid to |
2010/05/28 12:50:20 3532 r03 +----+--------+------------+------------+
2010/05/28 12:50:20 3532 r03 |8011|0064 |2010/02/15 |2011/02/16 |
2010/05/28 12:50:20 3532 r03 |8011|0065 |1992/01/01 |1993/01/01 |
2010/05/28 12:50:20 3532 r03 -----------------------------------------
2010/05/28 12:50:21 3532 r03 ROM: D N A S P 1 4 2
2010/05/28 12:50:21 3532 r03 REV: R e v G C 4
2010/05/28 12:50:21 3532 r03 SER: 48xxxxxE3
2010/05/28 12:50:21 3532 r03 CAID: 1830
2010/05/28 12:50:21 3532 r03 Prv.ID: 00 00 34 11 (sysid)
2010/05/28 12:50:21 3532 r03 Prv.ID: 00 00 00 00
2010/05/28 12:50:21 3532 r03 Prv.ID: 00 00 80 11
2010/05/28 12:50:21 3532 r03 [nagra-reader] ready for requests
2010/05/28 12:50:22 3531 r02 providers: 2 (000000,000000)
2010/05/28 12:50:22 3524 s init for all local cards done
2010/05/28 12:50:22 3524 s anti cascading disabled
2010/05/28 12:50:22 3524 s dvbapi disabled
2010/05/28 12:50:22 3524 s client(1) connect from 192.168.178.27 (pid=3559,
pipfd=17)
2010/05/28 12:50:22 3559 c01 Connection closed to client
2010/05/28 12:50:22 3524 s client(2) connect from 192.168.178.27 (pid=3560,
pipfd=18)
2010/05/28 12:50:22 3560 c02 Connection closed to client
2010/05/28 12:50:22 3531 r02 provider: 2, id: 000000
2010/05/28 12:50:22 3531 r02 chid: 05DF, date: 2009/10/26 - 2010/07/07
2010/05/28 12:50:22 3531 r02 chid: 7D23, date: 2009/08/07 - 2010/04/18
2010/05/28 12:50:22 3531 r02 chid: 0276, date: 2009/10/26 - 2010/07/07
2010/05/28 12:50:22 3531 r02 chid: 000F, date: 2009/08/07 - 2010/04/18
2010/05/28 12:50:22 3531 r02 chid: 04CE, date: 2009/05/07 - 2010/01/16
2010/05/28 12:50:22 3531 r02 chid: 029D, date: 2008/01/19 - 2008/01/21
2010/05/28 12:50:22 3531 r02 chid: 05FB, date: 2009/10/26 - 2010/07/07
2010/05/28 12:50:22 3531 r02 chid: 05E7, date: 2009/10/26 - 2010/07/07
2010/05/28 12:50:22 3531 r02 chid: 05DE, date: 2009/10/26 - 2010/07/07
2010/05/28 12:50:22 3531 r02 chid: 05E8, date: 2009/10/26 - 2010/07/07
2010/05/28 12:50:22 3531 r02 chid: 05DD, date: 2009/10/26 - 2010/07/07
2010/05/28 12:50:22 3531 r02 chid: 0605, date: 2009/10/26 - 2010/07/07
2010/05/28 12:50:22 3531 r02 chid: 05F1, date: 2009/10/26 - 2010/07/07
2010/05/28 12:50:23 3531 r02 chid: 7D27, date: 2009/08/07 - 2010/04/18
2010/05/28 12:50:23 3531 r02 chid: 00F0, date: 2009/05/07 - 2010/01/16
2010/05/28 12:50:23 3531 r02 chid: 0102, date: 2008/01/19 - 2008/01/21
2010/05/28 12:50:23 3531 r02 chid: 028B, date: 2008/01/19 - 2008/01/21
2010/05/28 12:50:23 3531 r02 chid: 028C, date: 2008/01/19 - 2008/01/21
2010/05/28 12:50:23 3531 r02 chid: 028D, date: 2008/01/19 - 2008/01/21
2010/05/28 12:50:23 3531 r02 chid: 028E, date: 2008/01/19 - 2008/01/21
2010/05/28 12:50:23 3531 r02 chid: 028F, date: 2008/01/19 - 2008/01/21
2010/05/28 12:50:23 3531 r02 chid: 0290, date: 2008/01/19 - 2008/01/21
2010/05/28 12:50:23 3531 r02 chid: 029E, date: 2008/01/19 - 2008/01/21
2010/05/28 12:50:23 3531 r02 chid: 0291, date: 2008/01/19 - 2008/01/21
2010/05/28 12:50:23 3531 r02 chid: 0292, date: 2008/01/19 - 2008/01/21
2010/05/28 12:50:23 3531 r02 chid: 0293, date: 2008/01/19 - 2008/01/21
2010/05/28 12:50:23 3531 r02 chid: 0294, date: 2008/01/19 - 2008/01/21
2010/05/28 12:50:23 3531 r02 chid: 0295, date: 2008/01/19 - 2008/01/21
2010/05/28 12:50:23 3531 r02 chid: 0298, date: 2008/01/19 - 2008/01/21
2010/05/28 12:50:23 3531 r02 chid: 0299, date: 2008/01/19 - 2008/01/21
2010/05/28 12:50:23 3524 s client(1) connect from 192.168.178.27 (pid=3563,
pipfd=17)
2010/05/28 12:50:23 3531 r02 chid: 029A, date: 2008/01/19 - 2008/01/21
2010/05/28 12:50:23 3531 r02 chid: 029B, date: 2008/01/19 - 2008/01/21
2010/05/28 12:50:23 3531 r02 chid: 029C, date: 2008/01/19 - 2008/01/21
2010/05/28 12:50:23 3531 r02 chid: 0103, date: 2008/01/19 - 2008/01/21
2010/05/28 12:50:23 3531 r02 chid: 029C, date: 2008/01/19 - 2008/01/21
2010/05/28 12:50:23 3531 r02 chid: 0104, date: 2008/01/19 - 2008/01/21
2010/05/28 12:50:23 3531 r02 chid: 0406, date: 2008/01/19 - 2008/01/21
2010/05/28 12:50:23 3531 r02 chid: 0105, date: 2008/01/19 - 2008/01/21
2010/05/28 12:50:23 3531 r02 chid: 0004, date: 2008/01/19 - 2008/01/21
2010/05/28 12:50:23 3563 c01 encrypted newcamd:34000-client 192.168.178.27 gra
nted (server, au(auto)=hdplus)
2010/05/28 12:50:23 3563 c01 user server authenticated successfully (CCcam)
2010/05/28 12:50:23 3563 c01 AU enabled for user server on reader hdplus
2010/05/28 12:50:23 3563 c01 no valid PROVID(s) found in CAID for user 'server
'
2010/05/28 12:50:23 3531 r02 [irdeto-reader] ready for requests
2010/05/28 12:50:23 3524 s client(2) connect from 192.168.178.27 (pid=3564,
pipfd=18)
2010/05/28 12:50:24 3564 c02 encrypted newcamd:34000-client 192.168.178.27 gra
nted (server, au(auto)=hdplus)
2010/05/28 12:50:24 3564 c02 user server authenticated successfully (CCcam)
2010/05/28 12:50:24 3564 c02 AU enabled for user server on reader hdplus
2010/05/28 12:50:24 3564 c02 no valid PROVID(s) found in CAID for user 'server
'
2010/05/28 12:50:28 3524 s client(1) connect from 192.168.178.27 (pid=3573,
pipfd=17)
2010/05/28 12:50:28 3573 c01 encrypted newcamd:34030-client 192.168.178.27 gra
nted (server, au(auto)=sky)
2010/05/28 12:50:28 3573 c01 user server authenticated successfully (CCcam)
2010/05/28 12:50:28 3573 c01 AU enabled for user server on reader sky
2010/05/28 12:51:34 3573 c01 server (1702&000000/0201/93:CEEA): found (617 ms)
by sky
2010/05/28 12:51:35 3573 c01 server (1702&000000/0201/93:B8B6): found (580 ms)
by sky
2010/05/28 12:51:38 3531 r02 server emmtype=shared, len=139, idx=0, cnt=1: wri
tten (665 ms) by sky
2010/05/28 12:52:47 3531 r02 server emmtype=shared, len=139, idx=1, cnt=1: wri
tten (570 ms) by sky
Webinterface Log:
Start: 28.05.10 / 22:39:01
UpTime: 01:31:31 OSCAM 0.99.4svn build #2340
STATUS CONFIGURATION READERS USERS SERVICES FILES SCRIPT SHUTDOWN
Show idle clients Hide idle clients Show hidden clients
hide PID Type ID Label AU Crypted Address Port Protocol Login Date Login Time Online CAID:SRVID Current Channel Idle Status
2351 s 0 root 0 0 127.0.0.1 0 server 28.05.10 22:39:01 01:31:31 0000:0000 00:00:06 OK
2356 l 0 root 0 0 127.0.0.1 0 logger 28.05.10 22:39:02 01:31:30 0000:0000 01:31:30 OK
2359 h 1 root 0 0 127.0.0.1 0 monitor 28.05.10 22:39:02 01:31:30 0000:0000 00:00:00 OK
2360 r 2 sky 1 0 127.0.0.1 0 dbox COM2 28.05.10 22:39:02 01:31:30 1702:0008 00:00:06 CARDOK
2361 r 3 hdplus -2 0 127.0.0.1 0 dbox COM1 28.05.10 22:39:02 01:31:30 0000:0000 01:31:18 CARDOK
2402 c 1 server 0 1 192.168.178.27 1360 newcamd 28.05.10 22:39:21 01:31:11 FFFE:FFFE 00:00:29 OK
2411 c 2 server 0 1 192.168.178.27 1361 newcamd 28.05.10 22:39:25 01:31:07 1702:0008 00:00:06 OK
13059 c 3 server3 -1 1 192.168.178.30 5987 newcamd 29.05.10 00:09:07 00:01:25 FFFE:FFFE 00:01:25 OK
2010/05/29 0:07:59 2411 c02 server (1702&000000/000B/93:615A): found (628 ms) by sky
2010/05/29 0:08:01 2411 c02 server (1702&000000/0008/93:AF2F): found (591 ms) by sky
2010/05/29 0:08:06 2411 c02 server (1702&000000/0008/93:B32F): found (595 ms) by sky
2010/05/29 0:08:13 2411 c02 server (1702&000000/0008/93:49ED): found (587 ms) by sky
2010/05/29 0:08:20 2411 c02 server (1702&000000/0008/93:E26B): found (599 ms) by sky
2010/05/29 0:08:27 2411 c02 server (1702&000000/0008/93:246F): found (587 ms) by sky
2010/05/29 0:08:34 2411 c02 server (1702&000000/0008/93:AF11): found (598 ms) by sky
2010/05/29 0:08:41 2411 c02 server (1702&000000/0008/93:2907): found (585 ms) by sky
2010/05/29 0:08:48 2411 c02 server (1702&000000/0008/93:EB37): found (592 ms) by sky
2010/05/29 0:08:55 2411 c02 server (1702&000000/0008/93:4FBD): found (590 ms) by sky
2010/05/29 0:09:02 2411 c02 server (1702&000000/0008/93:E682): found (604 ms) by sky
2010/05/29 0:09:07 2351 s client(3) connect from 192.168.178.30 (pid=13059, pipfd=19)
2010/05/29 0:09:07 13059 c03 encrypted newcamd:34030-client 192.168.178.30 granted (server3, au(auto)=sky)
2010/05/29 0:09:07 13059 c03 user server3 authenticated successfully (vdr-sc)
2010/05/29 0:09:07 13059 c03 AU enabled for user server3 on reader sky
2010/05/29 0:09:09 2411 c02 server (1702&000000/0008/93:F6EE): found (608 ms) by sky
2010/05/29 0:09:16 2411 c02 server (1702&000000/0008/93:7787): found (597 ms) by sky
2010/05/29 0:09:23 2411 c02 server (1702&000000/0008/93:8620): found (580 ms) by sky
2010/05/29 0:09:30 2411 c02 server (1702&000000/0008/93:DBE4): found (603 ms) by sky
2010/05/29 0:09:37 2411 c02 server (1702&000000/0008/93:3B07): found (592 ms) by sky
2010/05/29 0:09:44 2411 c02 server (1702&000000/0008/93:7E33): found (586 ms) by sky
2010/05/29 0:09:51 2411 c02 server (1702&000000/0008/93:4889): found (593 ms) by sky
2010/05/29 0:09:58 2411 c02 server (1702&000000/0008/93:5D76): found (590 ms) by sky
2010/05/29 0:10:05 2411 c02 server (1702&000000/0008/93:9451): found (586 ms) by sky
2010/05/29 0:10:12 2411 c02 server (1702&000000/0008/93:1180): found (585 ms) by sky
2010/05/29 0:10:19 2411 c02 server (1702&000000/0008/93:8742): found (617 ms) by sky
2010/05/29 0:10:26 2411 c02 server (1702&000000/0008/93:F101): found (590 ms) by sky
Switch Debug from 0 to 0 1 2 4 8 16 32 64 255
--------------------------------------------------------------------------------
OSCAM Webinterface developed by Streamboard Team - 29.05.10 00:10:32 | Access from 192.168.178.22
embedded Style by Eneen
CCcam.cfg.:
SERVER LISTEN PORT : 12000
DISABLE EMM : no
EXTRA EMM LEVEL : yes
N: 192.168.178.27 34000 server passwort 01 02 03 04 05 06 07 08 09 10 11 12 13 14
N: 192.168.178.27 34030 server passwort 01 02 03 04 05 06 07 08 09 10 11 12 13 14
oscam.server:
[global]
nice = -1
WaitForCards = 1
# logging
#pidfile = /tmp/oscam.pid
#logfile = /tmp/oscam.log
#usrfile = /dev/null
ClientTimeout = 5
LogFile = stdout
Level = 15
CacheDelay = 120
PreferLocalCards = 1
FallbackTimeout = 2
Sleep = 0
MaxLogSize = 102400
# monitor
[monitor]
port = 988
aulow = 120
monlevel = 2
# web interface
[webif]
httpallowed = 0.0.0.0-255.255.255.255
httpport = 8080
httpuser = xxxxx
httppwd = xxxx
httprefresh = <sekunden>
# protocols
port = 16000
[newcamd]
key = 0102030405060708091011121314
port = 34030@1702:000000;34000@1830:000000
keepalive = 1
oscam.user:
#
# user configuration
#
[account]
Group = 1,2
User = server
Pwd = passwort
CAID = 1702,1830
Ident = 1702:000000;1830:003411,008011
AU = 1
[account]
Group = 1
User = server1
Pwd = passwort1
CAID = 1702
IDENT=1702:000000
AU = 1
[account]
Group = 1
User = server2
Pwd = passwort2
CAID = 1702
IDENT = 1702:000000
AU = 1
[account]
Group = 1
User = server3
Pwd = passwort3
CAID = 1702
IDENT = 1702:000000
AU = 1
newcamd.list der Kathi`s mit Osterimage:
Kathi1:
CWS = 192.168.178.27 34000 server1 passwort1 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS = 192.168.178.27 34030 server1 passwort1 01 02 03 04 05 06 07 08 09 10 11 12 13 14
Kathi2:
CWS = 192.168.178.27 34000 server2 passwort2 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS = 192.168.178.27 34030 server2 passwort2 01 02 03 04 05 06 07 08 09 10 11 12 13 14
Ferguson200:
CWS = 192.168.178.27 34000 server3 passwort3 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS = 192.168.178.27 34030 server3 passwort3 01 02 03 04 05 06 07 08 09 10 11 12 13 14
mg.cfg:
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }
# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }
# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 02 }
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 05 }
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.3, later not work)
G: { 33 }
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30
# network ecm timeout in seconds
K: { 05 }
# newcamd dead routes connect retry, sec
Q: { 600 }
# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 02 }
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 02 } username password
# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80
# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 00 } 172.16.1.1 28007 /tmp/mgcamd.log
# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }
# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }
# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 11 }
# map all 180x nagra caids to 1801
# default is 01
F: { 00 }
ist das so richtig?
Hi Reus1972,Zitat:
Zitat von Reus1972
hast du schon einmal über meine Configs geschaut?
So sieht meine config für HD+ aus:
Und versuchs mal mit dvbapi, dann kannst dir das ganze mgcamd oder cccam ersparen....:dance:Zitat:
# Externer Reader für HD+
[reader]
Label = highdefinition
Protocol = mouse
Device = /dev/tts/0
Detect = CD
mhz = 368
cardmhz = 368
deprecated = 0
EMMCache = 1,3,2
CAID = 1830
n3_rsakey = BF**********D5
n3_boxkey = A7*****C
Group = 1
#Ident = 1830:003411
Und wenn´s unbedingt mgcamd sein muss, kannst mal mit diesen Einstellungen hier vergleichen:
http://www.spinnes-board.de/vb/showt...ght=910+mgcamd
Und wenn du in deiner oscam.user datei auf dem Server noch die 1830 vergeben würdest, bekämst du evtl. auch ein Bild.
[account]
Group = 1
User = server1
Pwd = passwort1
CAID = 1830
jepp, is so wie stummi schreibt.
bei caid sollten beide drin stehen wenn der parameter angegeben ist, also so:
caid=1702,1830
ansonsten find ich da keinen fehler, sollte so gehen.
[QUOTE=Stummi08/15;1013839]So sieht meine config für HD+ aus:
Und versuchs mal mit dvbapi, dann kannst dir das ganze mgcamd oder cccam ersparen....:dance:
Danke ersteinmal für eure Mühe.
Für was oder wohin kommt das dvbapi eigendlich?
Wird einfach nicht hell auf der Kathi.
Bitte noch einmal kontrollieren.
mg.cfg:
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 00 }
# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }
# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 02 }
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 01 }
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30
# network ecm timeout in seconds
K: { 05 }
# newcamd dead routes connect retry, sec
Q: { 300 }
# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 02 }
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password
# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80
# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 03 } 172.16.1.1 28007 /tmp/mgcamd.log
# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }
# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }
# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 11 }
# map all 180x nagra caids to 1801
# default is 01
F: { 00 }
oscam.server:
#
# reader configuration
#
# serial reader
[reader]
label = sky
Protocol = mouse
detect = CD
device = /dev/tts/1
group = 1
emmcache = 1,3,15
mhz = 600
cardmhz = 600
deprecated = 0
CAID = 1702
AU = 1
# Externer Reader für HD+
[reader]
label = highdefinition
Protocol = mouse
detect = CD
device = /dev/tts/0
group = 2
emmcache = 1,3,15
n3_rsakey = BFxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxD5
n3_boxkey = A7xxxxxxxxxxxxxxxxxxxxxxxxxxxxx7C
mhz = 368
cardmhz = 368
deprecated = 0
CAID = 1830
#Ident = 1830:003411
AU = 1
oscam.user:
#
# user configuration
#
[account]
Group = 1,2
User = server
Pwd = passwort
CAID = 1702,1830
Ident = 1702:000000;1830:003411,008011
AU = 1
[account]
Group = 1
User = server1
Pwd = passwort1
CAID = 1702,1830
IDENT=1702:000000
AU = 1
[account]
Group = 1
User = server2
Pwd = passwort2
CAID = 1702,1830
IDENT = 1702:000000
AU = 1
[account]
Group = 1
User = server3
Pwd = passwort3
CAID = 1702,1830
IDENT = 1702:000000
AU = 1
Probiers mal so, die IDENT werden nicht gebraucht und wenn schon dann bei HD+ 1830:000000 :
oscam.user:
[account]
Group = 1,2
User = server
Pwd = passwort
CAID = 1702,1830
AU = 1
[account]
Group = 1,2
User = server1
Pwd = passwort1
CAID = 1702,1830
AU = 1
[account]
Group = 1,2
User = server2
Pwd = passwort2
CAID = 1702,1830
AU = 1
[account]
Group = 1,2
User = server3
Pwd = passwort3
CAID = 1702,1830
AU = 1
Das .pdf in der angehängten Datei entfernen!!!
Und denke daran dass du alle Dateien mit einen UNIX-fähigen Editor änderst und auch als unix abspeicherst!
Haut alles nicht hin,auch mit diesen Einstellungen von Reus1972 schade:shake:!
Gibt es vielleicht noch eine andere stabile Lösung,so das ich meine Kathi`s uns die eine Ferguson200 (die nur Newcamd kann (hat))mit der Dbox verbinden kann?
hi leute
ich versuche schon seit wochen auf einer dream 8000 client hd hell zu bekommen mit dbox2-sever,AHAB2 Multicam.
die d02 ist in der dream getestet, hd ist offen !!!!!!!!!
ich habe ein keywelt image auf der box aber das ist nebensächlich.
ich habe alle varianten durch "newcs/cccam,newcs/mpcs/cccam" nix funzt.
bei mpcs/cccam wird meine d02 "kabel" nicht eingelesen mit der "Device = /dev/tts/1 " konfiguration in der mpcs.reader "mpcs v1.0.6".
auch bei anderen images "glj,zebra" bleibt hd dunkel.
ich bin fast davon überzeugt, das hd-sharen mit der dox2 nicht funzt.
ich habe bis jetzt nix gefunden das mich vom gegenteil überzeugt, alle howtos u. images für die dbox2 sharen kein hd !!!!!!!!!!:icon15:
gruss langer
Vielleicht solltest du dir ein anderes Hobby suchen, wenn du damit nicht klarkommst...:496:
Hab auf ner Dbox von Sky HD, Sky IT HD, ORF HD, SRG HD, bis hin zu HD+ laufen bzw. laufen gehabt... :grinsend0317:
Wo liegt das Problem?
Geht alles, wenn man will! :wink2:
Vielleicht solltest du nix posten, wenn du nix zur Lösung beitragen kannst :496:Zitat:
Zitat von Stummi08/15
Das Problem sind die Leute, die viel reden aber nix aussagen. :whis_kissass03_2643
Wenn du so ein Toller bist... belehre mich, poste etwas das auch funktioniert oder such dir selbst eine anderes Hobby.
Geht alles, wenn man weiss wie ! :wink2:
Hi, wenn die configs richtig sind, kannst du mal die CCcam ausschalten, dann Cardserver resetten und CCcam wieder ein schalten. Oder die Karte zwei-drei Mal rein-raus stecken. Du könntest aber auch deine configs posten. So kann man nur sagen, daß du was falsch machst, aber das hilft dir wohl nicht.
Hi,Zitat:
Zitat von sammy909
sammy909 ich danke dir das du korrecktur lesen möchtest.
ich habe die files noch nicht gehoste,da ich nicht alles zumüllen will und
weil ich ersteinmal sehen wollte ob es überhaupt resonance gibt.
schaut sie bitte mal durch, hoffendlich ist,sitzt der fehler vor dem rechner.
noch einmal die konfig:
dbox2/nokia/2x/AHAB2,newcs 1.6.5,mpcs 1.0.6,cccam 2.0.11
momentan ist das Keywelt_2xI_Juli_28CS-Image_Server29 auf der box
mpcs & newcs sind aktiv,alles funzt, nur hd scheinbar nicht.
bearbeitet mit ultraedit
die mpcs.conf noch ein wenig überladen "test-fragmente", aber das sind die dateien
ich hoffe es fehlt nix
gruss langer
Hi, durch deine configs steig ich nicht durch, sorry. Mein Tipp wäre kein CS Image flashen, sondern selbst alles einrichten, dann kannst du besser alles nachvollziehen, wenn es mal klemmt.
hi,
ich danke dir troz dem für den versuch.
hm... ich dachte,die dateien währen aufgeräumt und übersichtlich.
aber es sind schon einige subverbindungen nach zu vollziehen.
ich denke mal als nächstes bau ich mal ein jungfreundliches image von grund auf,auf.
der tip ist gut, hab ich noch nicht probiert.
bis denne langer
Hi, so sieht es in etwa bei mir aus. mpcs 1.0.6.4. HD wird automatisch gemappt. Newcs brauchst du nicht.
config
readerCode:[global]
Nice = -10
ClientTimeout = 4
ClientMaxIdle = 60
CacheDelay = 150
FallbackTimeout = 1
BindWait = 10
ResolveDelay = 10
DyndnsInterval = 120
#LogFile = stdout
#PidFile = /ramdsk/my.pid
#MaxLogSize = 1024
showecmdw = 0
showemmdw = 0
disablecache1 = 0
disablecache2 = 0
disablecache = 0
Filter = 0
[newcamd]
Key = 0103050709111315171921232527
Port = 50...@1702:000000;50...@0D05:000004
Sky und HD ORF
[MONITOR]
Port =988
AULow =120
MonLevel =0
NoCrypt =127.1.1.1
NoCrypt =10.0.0.0-10.255.255.255
NoCrypt =172.16.0.0-172.31.255.255
NoCrypt =192.168.0.0-192.168.255.255
# -- camd 3.5x ----------------------------------------------------------------
# Port : Port-Number (0 disables this protocol)
# ServerIP : bind service to ONE dedicated ip-address
# -----------------------------------------------------------------------------
#[cs378x]
#Port = 54343
[cs357x]
#Port = 50250
# -- DVB demuxer/descrambler (for dreambox) -----------------------------------
# Enable : 0 disbable, 1 enable
# -----------------------------------------------------------------------------
#[dvb]
#Enable = 0
userCode:[reader]
#blockemm = C0,03,02
blockua = 0
blockga = 0
blocksa = 0
AU = 1
Enable = 1
Label = multicam
Protocol = mouse
Device = /dev/tts/1
##pincode = 7291
#BaudRate = 16000
#bits = 7/8
#stopbits = 1/2
##parity = odd/even/none
##flowcontrol= hard/soft/none
PTS = 1
EMMCache = 1,3,2
Detect = CD
Group = 1
Fallback = 0
CAID = 1702,1833
#ChID = 0604:02,03,04,05,06,07,0E
[reader]
#blockemm = C0,03,02
blockua = 0
blockga = 0
blocksa = 0
AU = 1
Enable = 1
Label = reader
Protocol = mouse
Device = /dev/tts/0
##pincode = 7291
#BaudRate = 16000
#bits = 7/8
#stopbits = 1/2
##parity = odd/even/none
##flowcontrol= hard/soft/none
PTS = 1
EMMCache = 1,3,2
Detect = CD
Group = 2
Fallback = 0
CAID = 0D05
#
##===========================================================
## EMM over cascading
#[reader]
#Label = mynewcamd
#Protocol = newcamd
#Key = 0102030405060708091011121314
#Device = 11.11.12.12,1000
#Account = ddds,2212
#Fallback = 1
#Group = 1
#CAID = 0604
#ChID = 0604:02,03,04,06,07
#InactivityTimeout = 2
#EMMCache = 1,1,10
#blockua = 0
#blockga = 0
#blocksa = 0
#AU = 1
newcamd.list MGcamdCode:[account]
User = testuser1
Pwd = testpassword1
CAID = 1702,0D05
Group = 1,2
AU = multicam,reader
MonLevel = 4
Code:CWS_KEEPALIVE =300
CWS_MULTIPLE = dyndns... 50...:50... testuser1 testpassword1 01 03 05 07 09 11 13 15 17 19 21 23 25 27 lan server2
Zitat:
Zitat von sammy909
cool, ich danke dir.
ich werde es mal 1 zu 1 übernehmen
gruss langer
Arg viel kannst ja anscheinend noch nicht gelesen haben...
Denn dann wüßtest du, dass man kein newcs in verbindung mit mpcs (veraltet) besser oscam, braucht...
Genau wie deine Aussage:
Dann bist du anscheinend der einzige, bei dem das nicht läuft!Zitat:
alle howtos u. images für die dbox2 sharen kein hd !!!!!!!!!!
Fertige Images findest du hier sowieso nicht, und mit den howto´s die hier in diesem Forum gepostet sind hat´s bis jetzt schon jeder :huepfende0029: hinbekommen!
Glaubst du etwa man wird dir, ein für deine Zwecke fertiges Image, hier auf dem Silbertablett präsentieren?!
Les dich doch erstmal in die Materie ein, bevor du in jedem zweiten Thread schreibst, dass dein cccam kein HD kann!!! :schilder0576:
Also ich kann keine der PDF-Dateien öffnen, bekomme folgende Fehlermeldung.
Musst wahrscheinlich die endung ".pdf" entfernen.
Dann normal mit editor öffnen...
Ich hab die mit Notepad ++ geöffnet.