GBox & MBox Kontrolle???

Hallo,
ich habe folgendes Problem mit der S02 und Multicard ,und zwar bekomme ich einfach nichts hell mit meiner D2 Box Nokia im Multicam AHAB 2 (mit gelber Lampe) mit (2xI_Image.2009\keywelt_07_09_sat_sorglos_2 x_intel_gbox_mbox_newcs_mpcs_by_nash.img).Ich wollte die D2 Box später mit zwei Kathi`s 910 (Sommerdream Image) mit MBox oder GBox HomeCS betreiben. Könnte sich vielleicht mal einer dazu bereit erklären und sich diese Einstellungen mal an zuschauen,ob alles soweit stimmt oder auch nicht und noch etwas fehlen könnte?
Was muss ich alles in dem Menü einstellen? GBox / MBox oder beides???
Danke vorab.

cwshare.cfg
M: { 192.168.178.27 { 12345678 }}
O: { 2000 2000 }
D: { 192.168.178.29{ 8006 7005 { 12345678 { A3 A3 }}}}
D: { 192.168.178.28{ 8006 7005 { 12345678 { A3 A3 }}}}
C: { 127.0.0.1 15000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 } { 10 } { 1702FFFF:17020000 }
C: { 127.0.0.1 15001 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 } { 10 } { 1833FFFF:18330000 }

gbox_cfg
#gbox config file
# Trace/Debug
# xx yz ; xx=00 no konsole output
# xx yz ; xx=01 konsole output
# xx yz ; y=0 debug output (don´t use)
# xx yz ; y=1 no debug output
# xx yz ; z=0 ouput to konsole
# xx yz ; z=1 output to /var/tmp/debug.txt
# xx yz ; z=2 Output to UDP (to capture with gboxt)
Z: { 01 10 } 192.168.1.29 8024
# 00 auto
# 01 80X86
# 02 MPC823
# 03 IBM STB04xxx
# 00 auto
# 01 ibm
# 02 api2
# 03 api3
# 00 cw write style = use internal routine (only dbox2)
# 01 cw write style = CA_SET_DESCR type1 (dbox2, vdr)
# 02 cw write style = CA_SET_DESCR type2
# 03 cw write style = CA_SET_DESCR type3
# 04 cw write style = 16 byte /proc/bus/gtx
# 05 cw write style = 4096 byte /proc/bus/gtx, cw offset=0x04D0
# xx write cw in 1st device with index=xx
# yy write cw in 2nd device with index=yy
# 01 means with .index=0 (default)
# 02 means with .index=1
# 03 means with .index=0 and .index=1
# .. any bitwise combination ...
# FF means with all 8 indexes (0-7)
# PPC files,folders,devices
# folder/device comment
#F: { 01 } /var/tmp/pmt.tmp // pmt file
#F: { 02 } /var/tmp/emm.info // key update log file
#F: { 03 } /var/tmp/ecm.info // ecm info file
#F: { 11 } /var/keys // folder for config files
#F: { 12 } /var/tmp // folder for temporary file
#F: { 13 } /var/tmp // folder for keyfiles
#F: { 21 } /dev/dvb/adapter0/ca0 // ca device
#F: { 22 } /dev/dvb/adapter0/dvr0 // dvr device
#F: { 23 } /dev/dvb/adapter0/demux0 // demux device
#F: { 31 } /dev/dvb/adapter0/ca1 // second ca device to write cw´s (recording)
#F: { 41 } /dev/sci0 // STB04xxx slot1
#F: { 42 } /dev/sci1 // STB04xxx slot2
#F: { 43 } /dev/tts/0 // rs232 com1
#F: { 44 } /dev/tts/1 // rs232 com2
F: { 01 } 03/var/tmp/pmt.tmp//pmtfile
F: { 02 } /var/tmp/emm.info//keyupdatelogfile
F: { 03 } /var/tmp/ecm.info//ecminfofile
F: { 11 } /var/keys//folderforconfigfiles
F: { 12 } /var/tmp//folderfortemporaryfile
F: { 23 } /dev/dvb/adapter0/demux0//demuxdevice
F: { 54 } 03
#gbox working mode
# 00 pure Emu
# 01 pure SoftCam (when card inside), Emu (when no card inside)
# 02 pure Net Client
# 03 Mixed mode !!!!! always use this !!!!!
G: { 03 }
# Display ECM messages on Konsole
# 00 don´t show any ECM´s
# 01 show only valid ECM´s
# 02 show valid and bad ECM´s with complete data display
C: { 01 }
# Display EMM messages on Konsole
# 00 don´t show any EMM´s
# 01 show only valid EMM´s
# 02 show valid and bad EMM´s with complete data display
# 1* Log any tier change on PW-Nagra-17xx cards into /var/keys/pwupdate.log
M: { 01 }
# AutoUpdate
# 00 is ignored (default)
# 01 enable AU
# 02 Auto AU !!!!! always use this !!!!!
A: { 02 }
# Key update
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
U: { 01 }
# Hash pids
# 00 hash all pids, DO NOT USE THIS OPTION, IT IS ONLY FOR TESTING STUFF
# 01 hash only pids with implemented algos and available keys !!!!! always use this
H: { 01 }
# Key files folder
# 00 keyfiles in /var/keys
# 01 keyfiles in /var/tmp
T: { 00 }
# On Screen Display for the Multysystemcam on com1/com2
# 00 No OSD (default)
# 01 display Smartcard messages in Neutrino
# 02 display Smartcard messages in Neutrino new nhttpd format
# 03 display Smartcard messages in Enigma
O: { 00 } 192.168.1.100
# Logger and NET-mode UDP port Init
# 00 do not init UDP port
# 01 Init UDP port for IP, port, UDP
L: { 00 } 192.168.1.29 8017
# Use SSSP over rs232 port
# a0 a=1 debug on, a=0 normal operatiuon
# 0b b=1 for com1, b=2 for com2
# Option for Seasons-Interface
W: { 00 00 } 9600
# *x ** ; x = device nummber to be used (0= default)
# D* ** ; force use of /proc/bus/gtx for cw write operations
(in the dbox2 the gbox writes directly the CW´s, 00 is the
recommended mode ! No drivers are required) use D* ** ONLY if
you have Problems. 0* ** should be prefered !!!
# F* ** ; write CW´s in both devices (used for PVR in STB04xxx devices)
# ** y* ; y=0001b (0x1*) use slot1 as Multicam (only on STB04xxx)
# ** y* ; y=0010b (0x2*) use slot2 as Multicam (only on STB04xxx)
# ** y* ; y=0011b (0x3*) use slot1 and slot2 as Multicams (only on STB04xxx)
# ** *z ; z=0001b (0x*1) use com1 as Multicam
# ** *z ; z=0010b (0x*2) use com2 as Multicam
# ** *z ; z=0011b (0x*3) use com1 and com2 as Multicams
# ** yz ; yz=00110011b (0x33) use slot1+slot2+com1+com2 as Multicams
# ** *z ; z=0100b (0x*4) invert CTS detection on com1
# ** *z ; z=1000b (0x*8) invert CTS detection on com2
# example: yz = 0x0A = 00001010 (use com2 with inverted CTS detection line)
V: { 00 03 }
mbox.cfg
//mbox.cfg EXPLANATION and EXAMPLES
A: { 0 } // for QBoxHD receivers or for any receivers if needed it
//A: { x }
//Choose adapter path
//x=0 -> /dev/dvb/adapter0/
//x=1 -> /dev/dvb/adapter1/
//x=2 -> /dev/dvb/adapter2/
//x=.. -> .......
//default x=0
/************************************************** ************************************************** ********************/
D: { 0 }
//D: { x }
//x=0 -> disable
//x=1 -> enable dbox2 cw writing
//x=2 -> enable STAPI for IPBOX
//x=3 -> enable STAPI for Kathrein
//x=4 -> enable Linux DVB API for Kathrein
//x=5 -> enable triple dragon
//x=6 -> enable Qbox HD
//x=7 -> enable STAPI for Kathrein ufs922 -> dont work CSA decoding :(
//default disabled
/************************************************** ************************************************** ********************/
B: { 0 0 0 }
//B: { 1 127.0.0.1 127.0.0.1 } // for local watching over DVB
//B: { x IP_listen IP_send }
//x=0 -> disable local UDP ports 8004-80xx ,this ports are used with DVB cards and gbox plugin (Windows and Linux)
//x=1 -> enable
//IP_listen -> on what IP to wait for PMT and ECMs
//IP_send -> on what IP to send DCW
//default disabled
/************************************************** ************************************************** ********************/
Z: { 11 } { 192.168.178.22 8080}
// Z option -> control sending/writing current informations
// Z: { xy } { IP port }
// x=0 -> don't print time stamp (in console screen and in debug file)
// x=1 -> print time stamp ( .... )
// y=0 -> no writing/sending informations to debug file/destination IP
// y=1 -> send informations to destination IP but not in debug file
// y=2 -> write informations to debug file but don't send to destination IP
// y=3 -> write/send informations to debug file/destination IP
// IP port -> destination IP and UDP port where to send informations
// no default
/************************************************** ************************************************** ********************/
#C: { 127.0.0.1 7999 }
// C option -> control receiving some command messages localy or from another IP
// C: { IP port }
// IP-> your local IP or you DNS
// port -> on what port you will be waiting command messages
// no default
/************************************************** ************************************************** ********************/
U: { 1 }
// U options -> Update peer(s) IP if it changes while peer still resending ecm's/cw etc.. information
// default only on hello message peer(s) IP are updated !!!
// U: { x }
// x=0 -> disabled
// x=1 -> enabled
// default disabled
/************************************************** ************************************************** ********************/
L: { 1 }
// L option -> how mbox to menage virtual card(s) with level 0
// ( only for peer(s) who have and can reshare virtual cards but don't want to use LEVEL 0 card(s) for them self)
// L: { x }
// x=0 -> don't load any virtual cards with LEVEL 0, you can't use them for your self
// x=1 -> load all virtual cards with LEVEL 0 ,you will be using them for your self
// default 1
/************************************************** ************************************************** ********************/
#G: { /hdd/ }
//G option -> redirect writing ONLY debug.txt file to internal or external HDD in receivers or for any other reason.
//Remove #, ONLY if you want to use this option !!!!!!!
/************************************************** ************************************************** ********************/
T: { /tmp/ }
// T option -> where to store temp files ... (share.info,debug.txt ,etc.)
// T: { folder_path_to_files, example: T: { /tmp/ } }
/************************************************** ************************************************** ********************/
K: { /var/keys/ }
// K option -> where is cwshare.cfg,mbox.prio file
// K: { folder_path_to_files, example: K: { /var/keys/ } }
/************************************************** ************************************************** ********************/
M: { 1 }
// M option -> Mode option
// M: { x }
// x=0 -> local mode no NET
// x=1 -> NET mode
// default 0
/************************************************** ************************************************** ********************/
P: { /tmp/pmt.tmp }
// P option -> PMT location (Dont used with linux and windows)
// you must be tuned to channel so image can generate this file
// { /tmp/pmt.tmp } for receivers and images that create this file <- use this if you can
// { /tmp/pmtX.tmp } X-> number -> pmt1.tmp ......
// { 1/tmp/camd.socket } for enigma 1
// { 2/tmp/camd.socket } for enigma 2
/************************************************** ************************************************** ********************/
W: { 0 }
// W option -> write raw ECM to ecm.raw file
// W: { x }
// x=0 -> disabled
// x=1 -> enabled
// default disabled
/************************************************** ************************************************** ********************/
Q: { 30 }
//Q option -> newcamd connect retry in sec.
//Q: { x }
// default 300 sec.
/************************************************** ************************************************** ********************/
F: { 500 }
//F option -> reset writing debug.txt from begining if file size is higher then (x)(KB)
//F { x } -> decimal in KBytes
//default 500 KB
/************************************************** ************************************************** ********************/
//V: { card_type | device number | clock | inverse_Reset | inverse_CD_Line | detect card over CTS | DM800/8000 | dbox }
#V: { 3 1 3571200 0 0 0 0 0 } // external reader example -> Seca card, com1 port, clock 3.57 Mhz,
#V: { 3 2 3571200 1 0 0 0 0 }
#V: { 3 3 1 0 0 0 0 0 } // dreambox example -> Seca card,sci0 slot,3.33 Mhz
// [card_type]:
// Seca 3
// Irdeto 4
// Conax 5
// Cryptoworks 6
// Viaccess 7
// NDS 8
// Nagravision 9
// [device number]:
// COM1/ttyS0 1
// COM2/ttyS1 2
// /dev/sci0 3
// /dev/sci1 4
// /dev/usb/tts/0 5
// /dev/usb/tts/1 6
// /dev/tts/0 7
// /dev/tts/1 8
// /dev/ttyUSB0 9
// /dev/ttyUSB1 10
// /dev/scard0 11 //azbox
// /dev/scard1 12 //azbox
//[clocks]
//for COM ports and external card readers in Hz!!!
//for SCI DreamBox slots use this values
// 1 - 3.33 Mhz
// 2 - 3.63 Mhz
// 3 - 4 Mhz
// 4 - 4.44 Mhz
// 5 - 5Mhz
// 6 - 5.71 Mhz
// 7 - 6.66 Mhz
// 8 - 8 Mhz
//[Inverse Reset]
// 1 -yes
// 0 -no
//for GPIO
//2-gpio1
//3-gpio2
//4-gpio3
//5-gpio4
//6-gpio5
//7-gpio6
//8-gpio7
//[Inverse CD Line Detection]
//1 - yes
//0 - no
//[Detect card over CTS signal]
//1 - yes
//0 - no
//[DM800/8000 box]
//1 - yes
//0 - no
//[dbox serial/multicam]
//1 - yes
//0 - no
/************************************************** ************************************************** ********************/
#J: { 1 }
// J option -> enable adding betacrypt header to N3 ECM for Premier
// J { x }
// x = 0 -> disabled
// x = 1 -> enabled
/************************************************** ************************************************** ********************/
#S: { COM1 115200 }
//S option -> enable sssp protocol
//S: { x baud }
//x=COM1
//x=COM2
//x=/dev/ttyS0
//x=/dev/ttyS1
//x= serial device ...
//valids baud -> 115200,57600,38400,19200,9600
/************************************************** ************************************************** ********************/

15000.list
R: { 1500 }
E: { 1742 } // Premiere 1
E: { 1744 } // Premiere 2
E: { 1746 } // Premiere 3
E: { 1748 } // Premiere 4
E: { 174C } // Premiere Filmclassics
E: { 174E } // Premiere Filmfest
E: { 1728 } // Premiere Nostalgie
E: { 1766 } // 13th Street
E: { 1772 } // Discovery Channel
E: { 1774 } // Discovery Geschichte
E: { 170E } // Animal Planet
E: { 176A } // MGM
E: { 1768 } // Sci Fi
E: { 171C } // Premiere Krimi
E: { 1718 } // Fox
E: { 1780 } // Goldstar TV
E: { 176C } // Disney Channel
E: { 177E } // Beate-Uhse TV
E: { 1700 } // Premiere Sport Portal
E: { 1782 } // Heimatkanal
E: { 177C } // Focus Gesundheit
E: { 17A0 } // Hit24
E: { 179C } // 1-2-3 TV
E: { 17A6 } // Classica
E: { 17AA } // Sport
E: { 170C } // Sport
E: { 17AC } // Sport
E: { 176E } // Jetix
E: { 1770 } // Junior
E: { 171E } // RTL Crime
E: { 174A } // Passion
E: { 17C4 } // Sat.1 Comedy
E: { 0155 } // Cartoon Network
E: { 17D8 } // Animax
E: { 17DE } // E.Clips
E: { 184F } // Nick Premium
E: { 184E } // MTV Entertainment
E: { 184D } // MTV Music
E: { 17D8 } // Disney Playhouse
E: { 17DA } // Disney Toon
E: { 17C6 } // Kabel 1 Classics
E: { 17D0 } // Kinowelt
E: { 17D4 } // AXN
E: { 0154 } // NASN
E: { 0157 } // RTL Living
E: { 17DC } // Boomerang
E: { 17D2 } // TCM
E: { 0158 } // Eurosport 2
E: { 17D6 } // Romance TV
E: { 1758 } // P-80er
E: { 1754 } // Plove Songs
E: { 1752 } // P-Rock Hymnen
E: { 1756 } // P 60 er 70 er
E: { 1750 } // Dt Charts
E: { 175C } // P-Country
G: { 17020001 }
G: { 17020002 }
G: { 17020003

15001.list
R: { 1500 }
# Prem Full
E: { 18BA }
E: { 18BC }

Sind das deine Original-Passwörter in der CWsahre.cfg?

Wenn ja ändere die mal, die cwshare kann nicht mit 2 bzw. 3 gleichen PW`s umgehen.

Dann wieviele Karten hast du? nur die S02 ? Wenn auf der S02 HD drauf sein sollte müsstest du die 2 Line nehmen, wenn du kein HD auf der KArte hast dann nimm nur die erste C-Line. Bei vorhandenem HD_Abo müsste auch die Port.list angepasst werden.

Aber lies erstmal Hier da ist es eigentlich schon super beschrieben

Hi B.T.,
ich habe es nach dieser Anleitung ( http://www.spinnes-board.de/vb/showthread.php?t=128183 ) gemacht und habe eine S02 Voll Abo von Sky.Könntest du mir bitte mal sagen welches Passwort ich ändern sollte?
Brauche ich eigentlich die M-Line für HomeCS?
Die 15000.list b.w.z. 15001.list habe ich mir mit dem Ultra Edit erstellt und in var/keys Ordner gemacht.Aber warum wird die Box nicht hell?

ne M-Line brauchst du auch fürs interne Sharing und zwar für jede Box in deinem Netzwerk. Was hast du für eine Karte S02 oder V13 und ist dein VollAbo mit HD??
Wie sieht deine newcs.xml aus?

Zitat:

---

Zitat von Hasi0112

M: { 192.168.178.27 { 12345678 }}
O: { 2000 2000 }
D: { 192.168.178.29{ 8006 7005 { 12345678 { A3 A3 }}}}
D: { 192.168.178.28{ 8006 7005 { 12345678 { A3 A3 }}}}

---

hier steht immer 12345678 drin, das geht so nicht jedes PW darf nur einmal vergeben werden

Ich habe ein VollAbo mit einer S02 Karte.Soll ich die M-Line oder die D-Line verändern?
Die sieht so aus.
newcs.xml

<?xml version="1.0"?>
<!--

For setup-issues, look in readme.txt!
If there are other troubles, try different forums or irc channels around :o)

The configfile are NOT case-sensitive, and shouldnt care about dos/unix cr/lf.
-->

<newCSconfig>
<globals>
<!-- valid value for listening-ip are:
IPv4 adress of local interface. -->
<listening-ip>127.0.0.1</listening-ip>
</globals>
<readers name="Standard Phoenix on PC">
<device>
<!-- valid value for name are:
Any name of your choice, just to name the device for you to read. -->
<name>Phoenix on Com1</name>

<!-- valid value for type are:
phoenix, dbox, sci, dragon, sc8, mp35, smartreader, pcsc (for own binary) or infinity(for own binary). -->
<type>phoenix</type>

<!-- valid value for mhz are:
153(1.53mhz), 358(3.58mhz), 368(3,68Mhz), 450(4.5mhz), 536(5.36mhz), 600(6.00mhz), 715(7.15 mhz), 800(8.00mhz)
1000(10.00 mhz), 1071(10.71mhz), 1200 (12.00mhz), 1431(14.31 mhz), 1600 (16.00mhz)
This setting is now IMPORTANT, normal phoenix usually have 3.57mhz, and can usually be overclocked
to 6mhz. For the others you probably need extra crystal (be careful). -->
<mhz>600</mhz>

<!-- valid value for node are full path to device, f.ex /dev/tts/0,
/dev/sciX (for dreambox), /dev/cardreaderX (for dragon),
/dev/tts/USBX (for a usb2serial device).
COMx on Win32, COM1, COM2 etc.
For PC/SC this is just 0, 1 ,2 and so on (reader number) -->
<node>/dev/ttyUSB0</node>

<!-- valid value for infinity_number are number of device, if you have multiple, only used in infinity binary,
0, 1 ... -->
<infinity_number>0</infinity_number>

<!-- valid value for slot are:
0-7 (only used on Sc8). -->
<slot>0</slot>

<!-- valid value for parity are:
Odd, Even, None (ignored on sci and dragon).
This is only used on serial _BEFORE_ ATR is recieved. -->
<parity>none</parity>

<!-- valid value for reset are:
normal, inverse (ignored on sci and dragon).
normal is phoenix, inverse is smartmouse -->
<reset>normal</reset>

<!-- valid value for export are:
Yes,No - if not exported only localhost can connect. -->
<export>Yes</export>

<!-- valid value for enabled are:
Yes,No - if not enabled it cant be used. -->
<enabled>Yes</enabled>

<!-- valid value for blocksa are:
Yes, No - block shared address emm to card. -->
<blocksa>No</blocksa>

<!-- valid value for blockua are:
Yes, No - block unique address emm to card. -->
<blockua>No</blockua>

<!-- valid value for blockga are:
Yes, No - block group address emm to card. -->
<blockga>No</blockga>

<!-- valid value for blockC0 are:
Yes, No - block fake emm to card. -->
<blockC0>Yes</blockC0>

<!-- valid value for boxkey are:
The boxkey/boxid of your nagra/nds STB. -->
<!-- <boxkey>0000000000</boxkey> -->

<!-- valid value for rsa are:
The RSA key from your nagra STB. -->
<!-- <rsa>0000000000</rsa> -->

<!-- valid value for camkey are:
0 - Europe, 1 - Oz -->
<irdetomode>0</irdetomode>

<!-- valid value for irdeto-camkey are:
8byte hex. -->
<irdeto-camkey>0000000000000000</irdeto-camkey>

<!-- valid value for camkey-data are:
64byte hex -->
<irdeto-camkey-data>000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</irdeto-camkey-data>

<!-- valid value for crypto-special are:
Yes, No - Used to enable/disable real-time mosc on Cryptoworks. -->
<crypto-special>No</crypto-special>

<!-- valid value for ipk are:
64byte hex -->
<ipk>000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</ipk>

<!-- valid value for ucpk are:
64byte hex -->
<ucpk>00000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 000000000000</ucpk>

<!-- valid value for PTShanshake are:
Yes, No - Used to enable/disable real-time HighBaud on Cryptoworks and Viacess. -->
<PTShandshake>No</PTShandshake>

<!-- valid value for carddetect are:
Yes, No - Used to try to detect if card is present in you cardreader. -->
<carddetect>yes</carddetect>

<!-- valid value for newcamd_port are:
0,65535 - Which port newcamd server will listen for incomming connections. -->
<newcamd_port>15050</newcamd_port>

<!-- valid value for autosid are:
Yes, No - Let NewCS decide which sids should be allowed/denied based on card answers. -->
<autosid>Yes</autosid>

<!-- valid value for Seca-PPV are:
Yes, No - Let NewCS decide which sids should be allowed/denied based on card answers. -->
<Seca-PPV>no</Seca-PPV>

<!-- valid value for Pincode are:
0000, 9999 - For f.ex PPV on Conax, also for parental lock on conax and cryptoworks. -->
<pincode>0000</pincode>

<!-- Notes about Service ID's:
There are some points worth mentioning:
1. If you allow a sid, all others will be rejected for that caid.
2. When you deny a sid, all others then the denied will be let through to that caid.
3. If you dont specify a reader, all sid's will get let through.
4. Put as many provider-sections in sid as you'd like, and as many id-sections under allow/deny as you want.
5. Deny is the stronger one, will always override allow.
6. If you want to add several sid's at once, do <id>0000:0010</id>, this will add all ten to list. -->
<sid>
<allow>
<!-- valid value for id are:
4 numbers, if the service id is 3 numbers, add a 0 infront of it. -->
<id>0000</id><id>0001</id><id>0002</id>
</allow>
<deny>
<!-- valid value for id are:
4 numbers, if the service id is 3 numbers, add a 0 infront of it. -->
<id>0000</id><id>0001</id><id>0002</id>
</deny>
</sid>
<!-- valid value for priority are:
hard, round, fifo - hard is lower userid, higher priority(gets ECM through before user with higher id),
round, there is an equal chance for all users to get ECM through, fifo, first sendt ECM gets through. -->
<priority>round</priority>
</device>
</readers>
<radegastserver>
<!-- valid value for enable are:
Yes, No - Enable or Disable radegast server. -->
<enabled>Yes</enabled>

<!-- valid value for port are:
0,65535 - Which port to listen for incomming connections. -->
<port>10001</port>

<allow>
<!-- valid value for hostname are:
all, IP-address or DNS-name. -->
<hostname>localhost</hostname>
</allow>
</radegastserver>
<cache>
<!-- valid value for emm are:
0-255 - Number of EMM's to cache. -->
<emm>20</emm>

<!-- valid value for ecm are:
0-255 - Number of ECM's to cache.
-1 - Dynamic ECM Cache. -->
<ecm>-1</ecm>
</cache>
<httpd>
<server> <!-- Port to accept connections on -->
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>
<!-- valid value for userfile are:
Any username you'd like - Used for browser to logon (its case sensitive). -->
<name>newcs</name>

<!-- valid value for password are:
Any password you'd like - Used for browser to logon (its case sensitive). -->
<password>newcs</password>

<!-- valid value for accesslevel are:
admin, stats - Define what rights the user has in the web-console -->
<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>
<!-- valid value for password:
Max 25 characters and minimum 8, this is case-sensitive. -->
<password>NewCSpwd</password>

<!-- valid value for mode:
simple, advanced - Set TCP-Console to advanced mode to get access to
potentially dangerous features.-->
<mode>simple</mode>

<!-- valid value for level are:
normal, verbose, spam - How extensive debug should be. -->
<level>normal</level>

<!-- valid value for type are:
Init, general, ecm, emm, net, all - Section of debug that should be displayed. -->
<type>init</type>

<!-- valid value for output are:
Console, udp, tcp, file, all - Where to show debug. -->
<output>console,tcp</output>

<!-- console_options are so you can set own loglevel/type for console-logger:
Should hold level and type-tags like above. -->
<console_options>normal,init</console_options>

<!-- valid value for logfile are:
Path and filename - Where to write debug logs if file or all is chosed in output. -->
<logfile>/hdd/newcs.txt</logfile>

<!-- file_options are so you can set own loglevel/type for file-logger:
Should hold level and type-tags like above. -->
<file_options>spam,all</file_options>

<!-- valid value for udp_host are:
IP-address or DNS-name - Where to send debug if udp or all is chosed in output. -->
<udp_host>192.168.1.10</udp_host>

<!-- valid value for udp_port are:
0,65535 - Which port to send the udp packets. -->
<udp_port>1000</udp_port>

<!-- udp_options are so you can set own loglevel/type for udp-logger:
Should hold level and type-tags like above. -->
<udp_options>normal,init</udp_options>

<!-- valid value for tcp_port are:
0,65535 - Which port to listen for incomming tcp connections. -->
<tcp_port>1001</tcp_port>

<!-- tcp_options are so you can set own loglevel/type for tcp-logger:
Should hold level and type-tags like above. -->
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<!-- valid value for enabled are:
Yes, No - Enable or Disable newcamd server. -->
<enabled>Yes</enabled>

<!-- valid value for name are:
Any name - Used to identify server to remote clients,
if the remote client isnt newcamd, this field have no purpouse. -->
<name>newcs</name>

<!-- valid value for deskey are:
any 14x2 numbers - Used to encrypt the communication between
the client and the server. -->
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>

<!-- Notes about users:
The first user doesnt have au without beeing it set to on (unlike newcamd cardserver).
You can add as many user-sections as you want, just put them under eachother. -->
<user>
<!-- valid value for userfile are:
Any username you'd like - Used for client to logon (its case sensitive). -->
<name>dummy</name>

<!-- valid value for password are:
Any password you'd like - Used for client to logon (its case sensitive). -->
<password>dummy</password>

<!-- valid value for hostname are:
IP-address or DNS-name - Used for reverse login to the client. -->
<hostname>localhost</hostname>

<!-- valid value for port are:
0-65535 - Which port reverse login to the client. -->
<port>12000</port>

<!-- valid value for au are:
On,Off - Wheather the client are allowed to send EMM to the server. -->
<au>on</au>

<!-- valid value for sidoverride are:
On,Off - Wheather the client are allowed to override the SID-filter. -->
<sidoverride>off</sidoverride>

<!-- valid value for readers are device name,
if one <allow> present, other readers will be disabled! -->
<readers>
<allow>Phoenix on Com1</allow>
</readers>

<!-- valid value for spider are:
Yes,No - Wheather the client are allowed to be newcamd Cardspider. -->
<spider>No</spider>

<!-- valid value for rate are:
1-60 - number of seconds between each ecm -->
<rate>2</rate>

<!-- valid value for cardlevel are:
1 - If its set Mgcamd will use all cards over the same port. -->
<cardlevel>1</cardlevel>
</user>
</newcamdserver>
<chameleon2>
<server>
<!-- valid value for tcp_port are:
0,65535 - Which port to listen for incomming tcp connections. -->
<port>1234</port>
<!-- enable or disable the server, valid values are yes/no -->
<enabled>yes</enabled>

<!-- What Realm server will report to clients -->
<realm>myShares</realm>
</server>
<peer> <!-- Connect to remote Chamelon server with the below credentials -->
<hostname>localhost</hostname>
<!-- valid value for tcp_port are:
0,65535 - Which port to listen for incomming tcp connections. -->
<port>1234</port>
<!-- valid value for userfile are:
Any username you'd like - Used for client to logon (its case sensitive). -->
<name>myname</name>
<!-- valid value for password are:
Any password you'd like - Used for client to logon (its case sensitive). -->
<password>mypassword</password>

<!-- What Realm client has access to on server -->
<realm>myShares</realm>
</peer>
<user>
<!-- valid value for name are:
Any username you'd like - Used for client to logon (its case sensitive). -->
<name>myname</name>
<!-- valid value for password are:
Any password you'd like - Used for client to logon (its case sensitive). -->
<password>mypassword</password>
<!-- Not yet implemented, this will be how chameleon will connect to more than one network -->
<realm>myShares</realm>
</user>
<virtualcards>
<!-- valid value for virtualcards are:
A list of caid and provider id to add to the default list in chameleon2 -->
<vc>
<caid>0000</caid>
<provider>0000000</provider>
</vc>
</virtualcards>
</chameleon2>
</newCSconfig>

Mach es doch einfach so

M: { 192.168.178.27 { 12345678 }}
O: { 2000 2000 }
D: { 192.168.178.29{ 8006 7005 { 1234ABCD { A3 A3 }}}}
D: { 192.168.178.28{ 8006 7005 { ABCD1234 { A3 A3 }}}}.

wenn du ein Vollabo hast musst du deine 15000 noch anpassen. ich habe ein SKY-Abo inkl. HD und habe folgende Portlist:

R: { 2000 }
//
# Premiere HD (erlaubte SID's)

SA: { 0080 } // Sky History HD
SA: { 0081 } // Sky Sport HD
SA: { 0082 } // Discovery HD
SA: { 0083 } // Sky Cinemagic HD
SA: { 0084 } // Eurosport HD
SA: { 007E } // Disney Cinemagic HD
SA: { 007F } // NatGeo HD

# Sky Film (erlaubte SID's)
SA: { 000A } // Sky 1
SA: { 000B } // Sky +1
SA: { 002B } // Sky +24
SA: { 0009 } // Sky Action
SA: { 0008 } // Sky Comedy
SA: { 0014 } // Sky Filmfest
SA: { 0204 } // Sky Nostalgie
SA: { 0029 } // Sky Filmclassics
SA: { 0203 } // MGM
SA: { 0019 } // 13th Street

# Sky Sport (erlaubte SID's)
SA: { 0011 } // Sky Sport Info
SA: { 00DD } // Sport 1
SA: { 00DE } // Sport 2
SA: { 00DF } // Bundesliga
SA: { 0110 } // Sky Bundesliga 2
SA: { 011A } // Sky Bundesliga 3
SA: { 0124 } // Sky Bundesliga 4
SA: { 012E } // Sky Bundesliga 5
SA: { 0138 } // Sky Bundesliga 6
SA: { 0142 } // Sky Bundesliga 7
SA: { 0106 } // Sky Bundesliga 8
SA: { 0156 } // Sky Bundesliga 9
SA: { 0160 } // Sky Bundesliga 10
SA: { 00FC } // Sky Bundesliga 11
SA: { 014C } // Sky Bundesliga 12
SA: { 00FD } // Sky Sport 3
SA: { 014D } // Sky Sport 4
SA: { 0143 } // Sky Sport 5
SA: { 0139 } // Sky Sport 6
SA: { 012F } // Sky Sport 7
SA: { 0125 } // Sky Sport 8
SA: { 011B } // Sky Sport 9
SA: { 0160 } // Sky Sport 10
SA: { 0111 } // Sky Sport 11
SA: { 016B } // Sky Sport 12
SA: { 0175 } // Sky Sport 13
SA: { 0035 } // Sky Sport Austria

# Sky Welt (erlaubte SID's)
SA: { 0017 } // Sky Krimi
SA: { 000E } // Discovery Channel
SA: { 000D } // National Geographic
SA: { 000C } // NatGeo Wild
SA: { 0034 } // Spiegel Geschichte
SA: { 000F } // Focus Gesundheit
SA: { 00A8 } // Motorvision
SA: { 0024 } // Sci Fi
SA: { 001B } // RTL Crime
SA: { 002A } // 13th Street
SA: { 0032 } // TNT Serie
SA: { 0010 } // Fox Serie
SA: { 001D } // RTL Passion
SA: { 0016 } // Heimatkanal
SA: { 0206 } // Goldstar TV
SA: { 0018 } // Classica
SA: { 0022 } // Disney Channel
#SA: { 0015 } // Beate-Uhse TV
SA: { 001A } // Playhouse Disney
SA: { 0013 } // Junior
SA: { 001C } // Jetix

# Sky Welt Extra (erlaube SID's)
SA: { 0044 } // History
SA: { 17C4 } // Biography Channel
SA: { 003F } // Romance TV
SA: { 003C } // Kinowelt TV
SA: { 003D } // TNT Film
SA: { 3331 } // ESPN America
SA: { 0043 } // E.Clips
SA: { 003E } // AXN Action
SA: { 002B } // Animax
SA: { 0042 } // Boomerang
SA: { 3394 } // Cartoon Network
SA: { 4461 } // Sat.1 Comedy
SA: { 4462 } // Kabel 1 Classics
SA: { 700A } // Nick Premium
SA: { 3395 } // Eurosport 2
SA: { 3397 } // RTL Living
SA: { 184D } // VH1 Classic
SA: { 7009 } // MTV Entertainment
SA: { 0045 } // sportdigital.tv

# Big Brother (erlaube SID's) [Sat und KD]
#SA: { 0298 } // Big Brother

# Premiere Radio (erlaubte SID's) [Sat und KD]
SA: { 0099 } // P-60ER/70ER
SA: { 009A } // P-80ER/90ER
SA: { 009C } // P-COUNTRY/P-XMAS CHANNEL
SA: { 0096 } // P-DEUTSCHE CHARTS
SA: { 0098 } // P-LOVE SONGS
SA: { 009B } // P-RnB/HIP HOP
SA: { 0097 } // P-ROCK HYMNEN

# Premiere S02 Karte
G: { 17020001 }
G: { 17020002 }
G: { 17020003 }

zum anderen benötigst du nach meiner Meinung nur die 2. C-line aus deiner CWshare. (Ich hab bei mir jedenfalls nur die 2. drin und es läuft mit MBox/Newcs und meiner S02 Sky + HD)

Wie sieht deine newcs.xml aus?

Ok,werde es gleich mal so machen.
Muss ich die 15001 list entfernen aus dem Ordner /keys?

Die sieht so aus.
newcs.xml

<?xml version="1.0"?>
<!--

For setup-issues, look in readme.txt!
If there are other troubles, try different forums or irc channels around :o)

The configfile are NOT case-sensitive, and shouldnt care about dos/unix cr/lf.
-->

<newCSconfig>
<globals>
<!-- valid value for listening-ip are:
IPv4 adress of local interface. -->
<listening-ip>127.0.0.1</listening-ip>
</globals>
<readers name="Standard Phoenix on PC">
<device>
<!-- valid value for name are:
Any name of your choice, just to name the device for you to read. -->
<name>Phoenix on Com1</name>

<!-- valid value for type are:
phoenix, dbox, sci, dragon, sc8, mp35, smartreader, pcsc (for own binary) or infinity(for own binary). -->
<type>phoenix</type>

<!-- valid value for mhz are:
153(1.53mhz), 358(3.58mhz), 368(3,68Mhz), 450(4.5mhz), 536(5.36mhz), 600(6.00mhz), 715(7.15 mhz), 800(8.00mhz)
1000(10.00 mhz), 1071(10.71mhz), 1200 (12.00mhz), 1431(14.31 mhz), 1600 (16.00mhz)
This setting is now IMPORTANT, normal phoenix usually have 3.57mhz, and can usually be overclocked
to 6mhz. For the others you probably need extra crystal (be careful). -->
<mhz>600</mhz>

<!-- valid value for node are full path to device, f.ex /dev/tts/0,
/dev/sciX (for dreambox), /dev/cardreaderX (for dragon),
/dev/tts/USBX (for a usb2serial device).
COMx on Win32, COM1, COM2 etc.
For PC/SC this is just 0, 1 ,2 and so on (reader number) -->
<node>/dev/ttyUSB0</node>

<!-- valid value for infinity_number are number of device, if you have multiple, only used in infinity binary,
0, 1 ... -->
<infinity_number>0</infinity_number>

<!-- valid value for slot are:
0-7 (only used on Sc8). -->
<slot>0</slot>

<!-- valid value for parity are:
Odd, Even, None (ignored on sci and dragon).
This is only used on serial _BEFORE_ ATR is recieved. -->
<parity>none</parity>

<!-- valid value for reset are:
normal, inverse (ignored on sci and dragon).
normal is phoenix, inverse is smartmouse -->
<reset>normal</reset>

<!-- valid value for export are:
Yes,No - if not exported only localhost can connect. -->
<export>Yes</export>

<!-- valid value for enabled are:
Yes,No - if not enabled it cant be used. -->
<enabled>Yes</enabled>

<!-- valid value for blocksa are:
Yes, No - block shared address emm to card. -->
<blocksa>No</blocksa>

<!-- valid value for blockua are:
Yes, No - block unique address emm to card. -->
<blockua>No</blockua>

<!-- valid value for blockga are:
Yes, No - block group address emm to card. -->
<blockga>No</blockga>

<!-- valid value for blockC0 are:
Yes, No - block fake emm to card. -->
<blockC0>Yes</blockC0>

<!-- valid value for boxkey are:
The boxkey/boxid of your nagra/nds STB. -->
<!-- <boxkey>0000000000</boxkey> -->

<!-- valid value for rsa are:
The RSA key from your nagra STB. -->
<!-- <rsa>0000000000</rsa> -->

<!-- valid value for camkey are:
0 - Europe, 1 - Oz -->
<irdetomode>0</irdetomode>

<!-- valid value for irdeto-camkey are:
8byte hex. -->
<irdeto-camkey>0000000000000000</irdeto-camkey>

<!-- valid value for camkey-data are:
64byte hex -->
<irdeto-camkey-data>000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</irdeto-camkey-data>

<!-- valid value for crypto-special are:
Yes, No - Used to enable/disable real-time mosc on Cryptoworks. -->
<crypto-special>No</crypto-special>

<!-- valid value for ipk are:
64byte hex -->
<ipk>0000000000000000000000000000000000000000000 00 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</ipk>

<!-- valid value for ucpk are:
64byte hex -->
<ucpk>000000000000000000000000000000000000000000 00 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 000000000000</ucpk>

<!-- valid value for PTShanshake are:
Yes, No - Used to enable/disable real-time HighBaud on Cryptoworks and Viacess. -->
<PTShandshake>No</PTShandshake>

<!-- valid value for carddetect are:
Yes, No - Used to try to detect if card is present in you cardreader. -->
<carddetect>yes</carddetect>

<!-- valid value for newcamd_port are:
0,65535 - Which port newcamd server will listen for incomming connections. -->
<newcamd_port>15050</newcamd_port>

<!-- valid value for autosid are:
Yes, No - Let NewCS decide which sids should be allowed/denied based on card answers. -->
<autosid>Yes</autosid>

<!-- valid value for Seca-PPV are:
Yes, No - Let NewCS decide which sids should be allowed/denied based on card answers. -->
<Seca-PPV>no</Seca-PPV>

<!-- valid value for Pincode are:
0000, 9999 - For f.ex PPV on Conax, also for parental lock on conax and cryptoworks. -->
<pincode>0000</pincode>

<!-- Notes about Service ID's:
There are some points worth mentioning:
1. If you allow a sid, all others will be rejected for that caid.
2. When you deny a sid, all others then the denied will be let through to that caid.
3. If you dont specify a reader, all sid's will get let through.
4. Put as many provider-sections in sid as you'd like, and as many id-sections under allow/deny as you want.
5. Deny is the stronger one, will always override allow.
6. If you want to add several sid's at once, do <id>0000:0010</id>, this will add all ten to list. -->
<sid>
<allow>
<!-- valid value for id are:
4 numbers, if the service id is 3 numbers, add a 0 infront of it. -->
<id>0000</id><id>0001</id><id>0002</id>
</allow>
<deny>
<!-- valid value for id are:
4 numbers, if the service id is 3 numbers, add a 0 infront of it. -->
<id>0000</id><id>0001</id><id>0002</id>
</deny>
</sid>
<!-- valid value for priority are:
hard, round, fifo - hard is lower userid, higher priority(gets ECM through before user with higher id),
round, there is an equal chance for all users to get ECM through, fifo, first sendt ECM gets through. -->
<priority>round</priority>
</device>
</readers>
<radegastserver>
<!-- valid value for enable are:
Yes, No - Enable or Disable radegast server. -->
<enabled>Yes</enabled>

<!-- valid value for port are:
0,65535 - Which port to listen for incomming connections. -->
<port>10001</port>

<allow>
<!-- valid value for hostname are:
all, IP-address or DNS-name. -->
<hostname>localhost</hostname>
</allow>
</radegastserver>
<cache>
<!-- valid value for emm are:
0-255 - Number of EMM's to cache. -->
<emm>20</emm>

<!-- valid value for ecm are:
0-255 - Number of ECM's to cache.
-1 - Dynamic ECM Cache. -->
<ecm>-1</ecm>
</cache>
<httpd>
<server> <!-- Port to accept connections on -->
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>
<!-- valid value for userfile are:
Any username you'd like - Used for browser to logon (its case sensitive). -->
<name>newcs</name>

<!-- valid value for password are:
Any password you'd like - Used for browser to logon (its case sensitive). -->
<password>newcs</password>

<!-- valid value for accesslevel are:
admin, stats - Define what rights the user has in the web-console -->
<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>
<!-- valid value for password:
Max 25 characters and minimum 8, this is case-sensitive. -->
<password>NewCSpwd</password>

<!-- valid value for mode:
simple, advanced - Set TCP-Console to advanced mode to get access to
potentially dangerous features.-->
<mode>simple</mode>

<!-- valid value for level are:
normal, verbose, spam - How extensive debug should be. -->
<level>normal</level>

<!-- valid value for type are:
Init, general, ecm, emm, net, all - Section of debug that should be displayed. -->
<type>init</type>

<!-- valid value for output are:
Console, udp, tcp, file, all - Where to show debug. -->
<output>console,tcp</output>

<!-- console_options are so you can set own loglevel/type for console-logger:
Should hold level and type-tags like above. -->
<console_options>normal,init</console_options>

<!-- valid value for logfile are:
Path and filename - Where to write debug logs if file or all is chosed in output. -->
<logfile>/hdd/newcs.txt</logfile>

<!-- file_options are so you can set own loglevel/type for file-logger:
Should hold level and type-tags like above. -->
<file_options>spam,all</file_options>

<!-- valid value for udp_host are:
IP-address or DNS-name - Where to send debug if udp or all is chosed in output. -->
<udp_host>192.168.1.10</udp_host>

<!-- valid value for udp_port are:
0,65535 - Which port to send the udp packets. -->
<udp_port>1000</udp_port>

<!-- udp_options are so you can set own loglevel/type for udp-logger:
Should hold level and type-tags like above. -->
<udp_options>normal,init</udp_options>

<!-- valid value for tcp_port are:
0,65535 - Which port to listen for incomming tcp connections. -->
<tcp_port>1001</tcp_port>

<!-- tcp_options are so you can set own loglevel/type for tcp-logger:
Should hold level and type-tags like above. -->
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<!-- valid value for enabled are:
Yes, No - Enable or Disable newcamd server. -->
<enabled>Yes</enabled>

<!-- valid value for name are:
Any name - Used to identify server to remote clients,
if the remote client isnt newcamd, this field have no purpouse. -->
<name>newcs</name>

<!-- valid value for deskey are:
any 14x2 numbers - Used to encrypt the communication between
the client and the server. -->
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>

<!-- Notes about users:
The first user doesnt have au without beeing it set to on (unlike newcamd cardserver).
You can add as many user-sections as you want, just put them under eachother. -->
<user>
<!-- valid value for userfile are:
Any username you'd like - Used for client to logon (its case sensitive). -->
<name>dummy</name>

<!-- valid value for password are:
Any password you'd like - Used for client to logon (its case sensitive). -->
<password>dummy</password>

<!-- valid value for hostname are:
IP-address or DNS-name - Used for reverse login to the client. -->
<hostname>localhost</hostname>

<!-- valid value for port are:
0-65535 - Which port reverse login to the client. -->
<port>12000</port>

<!-- valid value for au are:
On,Off - Wheather the client are allowed to send EMM to the server. -->
<au>on</au>

<!-- valid value for sidoverride are:
On,Off - Wheather the client are allowed to override the SID-filter. -->
<sidoverride>off</sidoverride>

<!-- valid value for readers are device name,
if one <allow> present, other readers will be disabled! -->
<readers>
<allow>Phoenix on Com1</allow>
</readers>

<!-- valid value for spider are:
Yes,No - Wheather the client are allowed to be newcamd Cardspider. -->
<spider>No</spider>

<!-- valid value for rate are:
1-60 - number of seconds between each ecm -->
<rate>2</rate>

<!-- valid value for cardlevel are:
1 - If its set Mgcamd will use all cards over the same port. -->
<cardlevel>1</cardlevel>
</user>
</newcamdserver>
<chameleon2>
<server>
<!-- valid value for tcp_port are:
0,65535 - Which port to listen for incomming tcp connections. -->
<port>1234</port>
<!-- enable or disable the server, valid values are yes/no -->
<enabled>yes</enabled>

<!-- What Realm server will report to clients -->
<realm>myShares</realm>
</server>
<peer> <!-- Connect to remote Chamelon server with the below credentials -->
<hostname>localhost</hostname>
<!-- valid value for tcp_port are:
0,65535 - Which port to listen for incomming tcp connections. -->
<port>1234</port>
<!-- valid value for userfile are:
Any username you'd like - Used for client to logon (its case sensitive). -->
<name>myname</name>
<!-- valid value for password are:
Any password you'd like - Used for client to logon (its case sensitive). -->
<password>mypassword</password>

<!-- What Realm client has access to on server -->
<realm>myShares</realm>
</peer>
<user>
<!-- valid value for name are:
Any username you'd like - Used for client to logon (its case sensitive). -->
<name>myname</name>
<!-- valid value for password are:
Any password you'd like - Used for client to logon (its case sensitive). -->
<password>mypassword</password>
<!-- Not yet implemented, this will be how chameleon will connect to more than one network -->
<realm>myShares</realm>
</user>
<virtualcards>
<!-- valid value for virtualcards are:
A list of caid and provider id to add to the default list in chameleon2 -->
<vc>
<caid>0000</caid>
<provider>0000000</provider>
</vc>
</virtualcards>
</chameleon2>
</newCSconfig>

man ist die unübersichtlich

Was brauchst du alles davon.Ich suche es dir raus.

ich bin noch am durchforsten...

Probiere es mal damit:


Newcs.xml

<?xml version="1.0"?>
<newCSconfig> <readers name="Card Readers">
<device>
<name>CardReader</name>
<type>dbox</type>
<mhz>600</mhz>
<node>/dev/tts/0</node>
<parity>even</parity>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>no</blocksa>
<blockua>no</blockua>
<blockga>no</blockga>
<boxid></boxid>
<PTShandshake>no</PTShandshake>
<Seca-PPV>no</Seca-PPV>
<crypto-special>no</crypto-special>
<carddetect>no</carddetect>
<newcamd_port>15000</newcamd_port>
<autosid>yes</autosid>
<priority>round</priority>
</device>
</readers>
<radegastserver>
<enabled>no</enabled>
<port>10003</port>
<allow>ALL</allow>
</radegastserver>
<cache>
<emm>10</emm>
<ecm>30</ecm> </cache>
<httpd>
<server> <port>8080</port>
<enabled>yes</enabled>
</server>
<user>
<name>dummy</name>
<password>dummy</password>
<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>
<level>normal</level>
<type>init</type>
<output>console,udp,tcp</output>
<logfile></logfile>
<console_options></console_options>
<file_options></file_options>
<udp_host>192.168.0.100</udp_host>
<udp_port>1000</udp_port>
<udp_options></udp_options>
<tcp_port>3001</tcp_port>
<tcp_options></tcp_options>
</debug>
<newcamdserver>
<enabled>yes</enabled>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<name>newcs</name>
<userfile>/tmp/users.txt</userfile>
<user>
<name>dummy</name>
<password>dummy</password>
<spider>on</spider>
<sidoverride>off</sidoverride>
<au>on</au>
</user>
</newcamdserver>
</newCSconfig>


Cwshare.cfg

M: { 192.168.178.27 { 12345678 }}
O: { 2000 2000 }
D: { 192.168.178.29{ 8006 7005 { 1234ABCD { A3 A3 }}}}
D: { 192.168.178.28{ 8006 7005 { ABCD1234 { A3 A3 }}}}

C: { 127.0.0.1 15000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 } { 10 } { 1833FFFF:18330000 }


Und dann nimm mal die Portlist von mir und benenne sie in 15000.list.

Wenn du dann die Mbox startest, was erscheint dann im log?

Werde mal die Newcs.xml kopieren und den Rest in der xml Datei raus löschen.Alles andere habe ich schon geändert.
Jetzt kommt das nächste.
Wie kann ich die Mbox starten?Habe mir diese Tool`s UltraEdit / MboxCC zugelegt komme aber nicht so recht klar damit.Geht das vielleicht auch noch einfacher?

starte die Mbox einfach über das Image

Wie meinst du das,über das Image starten?
Und was soll ich da sehen?

du hast doch das KEywelt image, da gehst du in das Camd-Menü und startest den Emu

Da steht nur "Mbox Running".

Habe die Box mal neu gestartet!
Mal abwarten.

Immer noch alles dunkel auf der D2 Box!
Und nun?
Werde jetzt erst einmal auf die Arbeit gehen,vielleicht wenn du heute Abend ab 22H Zeit hast,das wir mal weiter machen.
MfG

ändere einfach mal den Eintrag:
#G: { /hdd/ }

in

G: { /tmp/ }

dann starte die Mbox neu und zeig was in der debug.txt im tmp ordner steht

Und wo?

Hallo,
den Eintrag habe ich geändert
G: { /tmp/ }
//G option -> redirect writing ONLY debug.txt file to internal or external HDD in receivers or for any other reason.
//Remove #, ONLY if you want to use this option !!!!!!!
/***********************************************
********************************************** ********************/

aber untendrunter in der Zeile steht noch etwas T: { /tmp/ } ist das so richtig?

T: { /tmp/ }// T option -> where to store temp files ... (share.info,debug.txt ,etc.)
// T: { folder_path_to_files, example: T: { /tmp/ } }


In dem Ordner / tmp gibt es keine debug.txt Datei oder muß ich die D2 Box mal neu starten für das ich diese Datei dann sehe?
Muß ich diese neu einbringen?

Habe mal die Box neu gestartet und auf einmal hat da etwas von (keine Festplatte vorhanden oder so) gestanden.

Soll ich mir mal das Keywelt Image (ohne Sorglos) neu drauf machen und nur Mbox & Gbox neu einrichten usw. oder was könnte ich machen,daß es mal hell wird in der Box?

War das nicht so dass du auf der D-Box nur die GBox installieren musst und auf der Kathi nur die MBox. Zumindest bei mir läuft das so, ohne Newcs.