DBOX2 Mastercrd und NDS V13 funzt nicht -:(

Hallo,

nach dem ich nun vergeblich versucht habe meine original Prem. Karte V13 zum Laufen zu bekommen, habe ich nun meinen alten "Mastercrd Junior" rausgekramt.

Leider auch ohne Erfolg.

Hier meine Daten:

DBox2 Sagem
Keywelt-Image Oktober
MasterCrd Junior an RS-232
MasterCrd Frequenz 3,57 Mhz

Sorglospaket installiert.

Hier meine newcs.xml

Code:

---

<newCSconfig>
        <readers name="DBox2">
                <device>
                       
                        <name>Multicam</name>

                       
                        <type>dbox</type>

                       
                        <mhz>357</mhz>

                       
                        <node>/dev/tts/0</node>

                       
                        <parity>odd</parity>

                       
                        <reset>normal</reset>

                       
                        <export>Yes</export>

                       
                        <enabled>Yes</enabled>

                       
                        <blocksa>No</blocksa>

                       
                        <blockua>No</blockua>

                       
                        <blockga>No</blockga>

                       
                        <boxkey>00000000</boxkey>

                       
                        <irdeto-camkey>0000000000000000</irdeto-camkey>

                       
                        <irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>

                       
                        <crypto-special>No</crypto-special>

                       
                        <ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>

                       
                        <ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>

                       
                        <PTShandshake>No</PTShandshake>

                       
                        <****detect>yes</****detect>

                       
                        <newcamd_port>34001</newcamd_port>

                       
                        <autosid>Yes</autosid>

                       
                        <Seca-PPV>no</Seca-PPV>

                       
                        <priority>round</priority>
                </device>
        </readers>
        <cache>
                       
                        <emm>20</emm>

                       
                        <ecm>-1</ecm>
        </cache>
        <debug>
                       
                        <mode>simple</mode>

                       
                        <level>normal</level>

                       
                        <type>init</type>

                       
                        <output>console,tcp</output>

                       
                        <console_options>normal,init</console_options>

                       
                        <tcp_port>10001</tcp_port>

                       
                        <tcp_options>normal,init</tcp_options>
        </debug>
        <newcamdserver>
                       
                        <enabled>Yes</enabled>

                       
                        <name>newcs</name>

                       
                        <deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>

                       
                        <user><status>access</status>
                               
                                <name>newcs1</name>

                               
                                <password>newcs</password>

                               
                                <hostname>192.168.1.8</hostname>

                               
                                <au>on</au>

                               
                                <sidoverride>off</sidoverride>

                               
                                <spider>off</spider>

                               
                                <rate>2</rate>
                        </user>
        </newcamdserver>
        <httpd>
<server>
<port>8088</port>
<enabled>yes</enabled>
</server>
<user>
<name>Admin</name>
<password>0815</password>
<accesslevel>admin</accesslevel>
</user></httpd></newCSconfig>

---

Und hier meine CCcam.cfg

Code:

---

  N: 192.168.1.8 34001 newcs1 newcs 01 02 03 04 05 06 07 08 09 10 11 12 13 14

---

Und hier noch mein newcs log

Code:

---

BusyBox v1.7.2 (2008-10-30 00:59:12 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.

/var # killall -9 newcs
/var # nwcs
-sh: nwcs: not found
/var # newcs
This is NewCS 1.62 - the New ****Server by the Butter-team..
Compiled on Aug 27 2008 at 16:49:31
Reading Config file from /var/tuxbox/config/newcs.xml
TCP-log password is disabled!
level: normal
type: init
output: console,tcp
logger config: level 1 type 3 output 5
Console log options: level 1 type 3
TCP log options: level 1 type 3
[ 19:46:07 ] [ Box detect ] Box type 4 (Dbox2)
[ 19:46:07 ] [ Config ] Option <blockc0> for device 0 (Multicam) not present, defaulting to NO
[ 19:46:07 ] [ Config ] Value in <ipk> for device 0 (Multicam) is INVALID, skipping...
[ 19:46:07 ] [ Config ] Value in <ucpk> for device 0 (Multicam) is INVALID, skipping...
[ 19:46:07 ] [ Config ] /dev/tts/0 ECM priority: round
[ 19:46:07 ] [ httpd ] httpd-user: Admin, password: 0815, accesslevel: admin
[ 19:46:07 ] [ EMM Cache ] Initialising dynamic Cache
[ 19:46:07 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 4939
[ 19:46:07 ] [ Loader ] Starting Telnet on port 10001
[ 19:46:07 ] [ Loader ] Started HTTP-server on port: 8088
[ 19:46:07 ] [ Loader ] Reader type 4 on node /dev/tts/0
[ 19:46:07 ] [ Dbox ] Opening device /dev/tts/0
[ 19:46:08 ] [ Loader ] Unknown ****
[ 19:46:08 ] [ Loader ] Trying Irdeto (T=14)
[ 19:46:08 ] [ Loader ] Reader type 4 on node /dev/tts/0
[ 19:46:08 ] [ Dbox ] Opening device /dev/tts/0
[ 19:46:10 ] [ Loader ] Reset failed ...
[ 19:46:10 ] [ Loader ] Starting Newcamd Server on port 34001
[ 19:46:10 ] [ Newcamd ] Newcamd thread Server started on port 34001
[ 19:46:10 ] [ NewCS ] Ready to GO! :)
/var #

---

Wäre echt super, wenn mir einer einen Tip geben könnte. Ich bin mittlerweile ziemlich ratlos.

Danke und Gruß

Reader falsch konfiguriert, Du hast ja kein Multicam sondern einen Phoenixreader, hier ein Beispiel:

<device>
<name>phoenix</name>
<type>Phoenix</type>
<node>/dev/tts/0</node>
<mhz>357</mhz> <!-- oder 600 -->
<parity>even</parity>
<reset>normal</reset>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<PTShandshake>no</PTShandshake>
<crypto-special>no</crypto-special>
<****detect>yes</****detect>
<newcamd_port>*****</newcamd_port>
<priority>round</priority>
<autosid>Yes</autosid>
</device>

Mmhh. Ist ja witzig. Wenn ich hier Dir Antworte sehe ich Deine Config.

Confused

O.k. der Eintrag ist doch egal, oder:
<name>Multicam</name>
<type>Phoenix</type>

Oder spielen die tatsächlich eine Rolle.
Und nach langem lesen bin ich der Meinung, dass ich den externen Reader über /dev/tts/0 anspreche.

Bitte klärt mich auf

die Config oben passt für einen externer Reader an der DB2.
Du kannst sie 1:1 übernehmen, da auf 3,57MHZ gestellt.

Nun habe ich mal meine newcs.xml geändert:

Code:

---

<newCSconfig>
        <readers name="DBox2">
                <device>
                       
                        <name>phoenix</name>

                       
                        <type>Phoenix</type>

                       
                        <mhz>357</mhz>

                       
                        <node>/dev/tts/0</node>

                       
                        <parity>even</parity>

                       
                        <reset>normal</reset>

                       
                        <export>Yes</export>

                       
                        <enabled>Yes</enabled>

                       
                        <blocksa>No</blocksa>

                       
                        <blockua>No</blockua>

                       
                        <blockga>No</blockga>

                       
                        <boxkey>00000000</boxkey>

                       
                        <irdeto-camkey>0000000000000000</irdeto-camkey>

                       
                        <irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>

                       
                        <crypto-special>No</crypto-special>

                       
                        <ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>

                       
                        <ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>

                       
                        <PTShandshake>No</PTShandshake>

                       
                        <****detect>yes</****detect>
                       
                        <crypto-special>no</crypto-special>

                       
                        <newcamd_port>34001</newcamd_port>

                       
                        <autosid>Yes</autosid>

                       
                        <Seca-PPV>no</Seca-PPV>

                       
                        <priority>round</priority>
                </device>
        </readers>
        <cache>
                       
                        <emm>20</emm>

                       
                        <ecm>-1</ecm>
        </cache>
        <debug>
                       
                        <mode>simple</mode>

                       
                        <level>normal</level>

                       
                        <type>init</type>

                       
                        <output>console,tcp</output>

                       
                        <console_options>normal,init</console_options>

                       
                        <tcp_port>10001</tcp_port>

                       
                        <tcp_options>normal,init</tcp_options>
        </debug>
        <newcamdserver>
                       
                        <enabled>Yes</enabled>

                       
                        <name>newcs</name>

                       
                        <deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>

                       
                        <user><status>access</status>
                               
                                <name>newcs1</name>

                               
                                <password>newcs</password>

                               
                                <hostname>192.168.1.8</hostname>

                               
                                <au>on</au>

                               
                                <sidoverride>off</sidoverride>

                               
                                <spider>off</spider>

                               
                                <rate>2</rate>
                        </user>
        </newcamdserver>
        <httpd>
<server>
<port>8088</port>
<enabled>yes</enabled>
</server>
<user>
<name>Admin</name>
<password>0815</password>
<accesslevel>admin</accesslevel>
</user></httpd></newCSconfig>

---

Hier das Ergebnis im Log:

Code:

---

BusyBox v1.7.2 (2008-10-30 00:59:12 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.

/var # killall -9 newcs
/var # newcs
This is NewCS 1.62 - the New ****Server by the Butter-team..
Compiled on Aug 27 2008 at 16:49:31
Reading Config file from /var/tuxbox/config/newcs.xml
TCP-log password is disabled!
level: normal
type: init
output: console,tcp
logger config: level 1 type 3 output 5
Console log options: level 1 type 3
TCP log options: level 1 type 3
[ 20:21:20 ] [ Box detect ] Box type 4 (Dbox2)
[ 20:21:20 ] [ Config ] Option <blockc0> for device 0 (phoenix) not present, defau
[ 20:21:20 ] [ Config ] Value in <ipk> for device 0 (phoenix) is INVALID, skipping
[ 20:21:20 ] [ Config ] Value in <ucpk> for device 0 (phoenix) is INVALID, skippin
[ 20:21:20 ] [ Config ] /dev/tts/0 ECM priority: round
[ 20:21:20 ] [ httpd ] httpd-user: Admin, password: 0815, accesslevel: admin
[ 20:21:20 ] [ EMM Cache ] Initialising dynamic Cache
[ 20:21:20 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 5021
[ 20:21:21 ] [ Loader ] Starting Telnet on port 10001
[ 20:21:21 ] [ Loader ] Started HTTP-server on port: 8088
[ 20:21:21 ] [ Loader ] Reader type 2 on node /dev/tts/0
[ 20:21:21 ] [ Phoenix ] Opening device /dev/tts/0
[ 20:21:21 ] [ Phoenix ] Setting Parity to: EVEN
[ 20:21:21 ] [ Phoenix ] Setting 2 Stop bits on node /dev/tts/0
[ 20:21:21 ] [ Phoenix ] Setting Baud to standard 9600
[ 20:21:21 ] [ Phoenix ] Normal RESET on node /dev/tts/0
[ 20:21:23 ] [ Loader ] Reset failed ...
[ 20:21:23 ] [ Loader ] Starting Newcamd Server on port 34001
[ 20:21:23 ] [ NewCS ] Ready to GO! :)
/var # [ 20:21:23 ] [ Newcamd ] Newcamd thread Server started on port 34001
[ 20:21:23 ] [ Loader ] Reader type 2 on node /dev/tts/0
[ 20:21:23 ] [ Phoenix ] Opening device /dev/tts/0
[ 20:21:23 ] [ Phoenix ] Setting Parity to: EVEN
[ 20:21:23 ] [ Phoenix ] Setting 2 Stop bits on node /dev/tts/0
[ 20:21:23 ] [ Phoenix ] Setting Baud to standard 9600
[ 20:21:23 ] [ Phoenix ] Normal RESET on node /dev/tts/0
[ 20:21:25 ] [ Loader ] Reset failed ...
[ 20:21:25 ] [ Loader ] Reader type 2 on node /dev/tts/0
[ 20:21:25 ] [ Phoenix ] Opening device /dev/tts/0
[ 20:21:25 ] [ Phoenix ] Setting Parity to: EVEN
[ 20:21:25 ] [ Phoenix ] Setting 2 Stop bits on node /dev/tts/0
[ 20:21:25 ] [ Phoenix ] Setting Baud to standard 9600
[ 20:21:25 ] [ Phoenix ] Normal RESET on node /dev/tts/0
[ 20:21:26 ] [ Loader ] Reset failed ...
[ 20:21:26 ] [ Loader ] Reader type 2 on node /dev/tts/0
[ 20:21:26 ] [ Phoenix ] Opening device /dev/tts/0
[ 20:21:26 ] [ Phoenix ] Setting Parity to: EVEN
[ 20:21:26 ] [ Phoenix ] Setting 2 Stop bits on node /dev/tts/0
[ 20:21:26 ] [ Phoenix ] Setting Baud to standard 9600
[ 20:21:26 ] [ Phoenix ] Normal RESET on node /dev/tts/0
[ 20:21:28 ] [ Loader ] Reset failed ...
[ 20:21:28 ] [ Loader ] Reader type 2 on node /dev/tts/0
[ 20:21:28 ] [ Phoenix ] Opening device /dev/tts/0
[ 20:21:28 ] [ Phoenix ] Setting Parity to: EVEN
[ 20:21:28 ] [ Phoenix ] Setting 2 Stop bits on node /dev/tts/0
[ 20:21:28 ] [ Phoenix ] Setting Baud to standard 9600
[ 20:21:28 ] [ Phoenix ] Normal RESET on node /dev/tts/0
[ 20:21:29 ] [ Loader ] Reset failed ...
[ 20:21:29 ] [ Loader ] Reader type 2 on node /dev/tts/0
[ 20:21:29 ] [ Phoenix ] Opening device /dev/tts/0
[ 20:21:29 ] [ Phoenix ] Setting Parity to: EVEN
[ 20:21:29 ] [ Phoenix ] Setting 2 Stop bits on node /dev/tts/0
[ 20:21:29 ] [ Phoenix ] Setting Baud to standard 9600
[ 20:21:29 ] [ Phoenix ] Normal RESET on node /dev/tts/0
[ 20:21:31 ] [ Loader ] Reset failed ...
[ 20:21:31 ] [ Loader ] Reader type 2 on node /dev/tts/0
[ 20:21:31 ] [ Phoenix ] Opening device /dev/tts/0
[ 20:21:31 ] [ Phoenix ] Setting Parity to: EVEN
[ 20:21:31 ] [ Phoenix ] Setting 2 Stop bits on node /dev/tts/0
[ 20:21:31 ] [ Phoenix ] Setting Baud to standard 9600
[ 20:21:31 ] [ Phoenix ] Normal RESET on node /dev/tts/0
[ 20:21:32 ] [ Loader ] Unknown ****
[ 20:21:32 ] [ Loader ] Trying Irdeto (T=14)
[ 20:21:32 ] [ Loader ] Reader type 2 on node /dev/tts/0
[ 20:21:32 ] [ Phoenix ] Opening device /dev/tts/0
[ 20:21:32 ] [ Phoenix ] Setting Parity to: EVEN
[ 20:21:32 ] [ Phoenix ] Setting 2 Stop bits on node /dev/tts/0
[ 20:21:32 ] [ Phoenix ] Setting Baud to custom 5713
[ 20:21:32 ] [ Phoenix ] Normal RESET on node /dev/tts/0
[ 20:21:34 ] [ Loader ] Reset failed ...
[ 20:21:34 ] [ Loader ] Starting Newcamd Server on port 34001
[ 20:21:34 ] [ Newcamd ] Newcamd thread Server started on port 34001
[ 20:21:34 ] bind: error! 98: Address already in use

---

Leider immer noch kein Bild :-(

@hansi45

Schon mal besten Dank für Deine Hilfe. Bin schon ca. 1 Woche am Basteln. Aber ich bekomme einfach kein Bild.

So nun habe ich Deine xml übernommen. Sieht nun so aus:

Code:

---

<device>
<name>phoenix</name>
<type>Phoenix</type>
<node>/dev/tts/0</node>
<mhz>357</mhz> <!-- oder 600 -->
<parity>even</parity>
<reset>normal</reset>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<PTShandshake>no</PTShandshake>
<crypto-special>no</crypto-special>
<****detect>yes</****detect>
<newcamd_port>34001</newcamd_port>
<priority>round</priority>
<autosid>Yes</autosid>
</device>

---

Leider auch kein Bild

reset mal auf hard probieren

Bind Error, Port bereits in Benutzung, NewCS mehrfach laufen?
Vor dem Neustart der NewCS killall newcs ausführen

So,

hier nun noch mal mein Log nach einem Box Neustart.

Reset steht noch auf Normal

Code:

---

BusyBox v1.7.2 (2008-10-30 00:59:12 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.

/var # killall -9 newcs
/var # newcs
This is NewCS 1.62 - the New ****Server by the Butter-team..
Compiled on Aug 27 2008 at 16:49:31
Reading Config file from /var/tuxbox/config/newcs.xml
[ 20:38:24 ] [ Box detect ] Box type 4 (Dbox2)
[ 20:38:24 ] [ Config ] Auto readers config enabled
[ 20:38:24 ] [ Config ] Devicetype in config must be wrong, defaulting to Phoenix..
[ 20:38:24 ] [ Config ] Devicetype in config must be wrong, defaulting to Phoenix..
[ 20:38:24 ] [ Config ] Option <cache> not present, defaulting EMM: 20, ECM: Dynamic
[ NewCS ] Process ID is: 547
[ 20:38:24 ] [ NewCS ] Ready to GO! :)
/var #

---

Werde jetzt mal den Reset auf Hard setzen

Wieder ich mit einer neuen Konfiguration:

newcs.xml

Code:

---

<newCSconfig>
        <readers name="DBox2">
                <device>
                       
                        <name>phoenix</name>

                       
                        <type>Phoenix</type>

                       
                        <mhz>357</mhz>

                       
                        <node>/dev/tts/0</node>

                       
                        <parity>even</parity>

                       
                        <reset>normal</reset>

                       
                        <export>Yes</export>

                       
                        <enabled>Yes</enabled>

                       
                        <blocksa>No</blocksa>

                       
                        <blockua>No</blockua>

                       
                        <blockga>No</blockga>

                       
                        <boxkey>00000000</boxkey>

                       
                        <irdeto-camkey>0000000000000000</irdeto-camkey>

                       
                        <irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>

                       
                        <crypto-special>No</crypto-special>

                       
                        <ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>

                       
                        <ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>

                       
                        <PTShandshake>No</PTShandshake>

                       
                        <****detect>yes</****detect>

                       
                        <newcamd_port>34001</newcamd_port>

                       
                        <autosid>Yes</autosid>

                       
                        <Seca-PPV>no</Seca-PPV>

                       
                        <priority>round</priority>
                </device>
        </readers>
        <cache>
                       
                        <emm>20</emm>

                       
                        <ecm>-1</ecm>
        </cache>
        <debug>
                       
                        <mode>simple</mode>

                       
                        <level>normal</level>

                       
                        <type>init</type>

                       
                        <output>console,tcp</output>

                       
                        <console_options>normal,init</console_options>

                       
                        <tcp_port>10001</tcp_port>

                       
                        <tcp_options>normal,init</tcp_options>
        </debug>
        <newcamdserver>
                       
                        <enabled>Yes</enabled>

                       
                        <name>newcs</name>

                       
                        <deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>

                       
                        <user><status>access</status>
                               
                                <name>newcs1</name>

                               
                                <password>newcs</password>

                               
                                <hostname>192.168.1.8</hostname>

                               
                                <au>on</au>

                               
                                <sidoverride>off</sidoverride>

                               
                                <spider>off</spider>

                               
                                <rate>2</rate>
                        </user>
        </newcamdserver>
        <httpd>
<server>
<port>8088</port>
<enabled>yes</enabled>
</server>
<user>
<name>Admin</name>
<password>0815</password>
<accesslevel>admin</accesslevel>
</user></httpd></newCSconfig>

---

Code:

---

BusyBox v1.7.2 (2008-10-30 00:59:12 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.

/var # killall -9 newcs
/var # newcs
This is NewCS 1.62 - the New ****Server by the Butter-team..
Compiled on Aug 27 2008 at 16:49:31
Reading Config file from /var/tuxbox/config/newcs.xml
TCP-log password is disabled!
level: normal
type: init
output: console,tcp
logger config: level 1 type 3 output 5
Console log options: level 1 type 3
TCP log options: level 1 type 3
[ 20:55:30 ] [ Box detect ] Box type 4 (Dbox2)
[ 20:55:30 ] [ Config ] Option <blockc0> for device 0 (phoenix) not present, defaulting to NO
[ 20:55:30 ] [ Config ] Value in <ipk> for device 0 (phoenix) is INVALID, skipping...
[ 20:55:30 ] [ Config ] Value in <ucpk> for device 0 (phoenix) is INVALID, skipping...
[ 20:55:30 ] [ Config ] /dev/tts/0 ECM priority: round
[ 20:55:30 ] [ httpd ] httpd-user: Admin, password: 0815, accesslevel: admin
[ 20:55:30 ] [ EMM Cache ] Initialising dynamic Cache
[ 20:55:30 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 1143
[ 20:55:31 ] [ Loader ] Starting Telnet on port 10001
[ 20:55:31 ] [ Loader ] Started HTTP-server on port: 8088
[ 20:55:31 ] [ Loader ] Reader type 2 on node /dev/tts/0
[ 20:55:31 ] [ Phoenix ] Opening device /dev/tts/0
[ 20:55:31 ] [ Phoenix ] Setting Parity to: EVEN
[ 20:55:31 ] [ Phoenix ] Setting 2 Stop bits on node /dev/tts/0
[ 20:55:31 ] [ Phoenix ] Setting Baud to standard 9600
[ 20:55:31 ] [ Phoenix ] Normal RESET on node /dev/tts/0
[ 20:55:33 ] [ Loader ] Unknown ****
[ 20:55:33 ] [ Loader ] Trying Irdeto (T=14)
[ 20:55:33 ] [ Loader ] Reader type 2 on node /dev/tts/0
[ 20:55:33 ] [ Phoenix ] Opening device /dev/tts/0
[ 20:55:33 ] [ Phoenix ] Setting Parity to: EVEN
[ 20:55:33 ] [ Phoenix ] Setting 2 Stop bits on node /dev/tts/0
[ 20:55:33 ] [ Phoenix ] Setting Baud to custom 5713
[ 20:55:33 ] [ Phoenix ] Normal RESET on node /dev/tts/0
[ 20:55:35 ] [ Loader ] Unknown ****
[ 20:55:35 ] [ NewCS ] Ready to GO! :)
/var #

---

Sieht ja irgendwie schon besser aus. Leider noch kein Bild

Hallo ...

ist noch einer da, der mir helfen kann ???

Code:

---

BusyBox v1.7.2 (2008-10-30 00:59:12 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.

/var # killall -9 newcs
/var # newcs
This is NewCS 1.62 - the New ****Server by the Butter-team..
Compiled on Aug 27 2008 at 16:49:31
Reading Config file from /var/tuxbox/config/newcs.xml
TCP-log password is disabled!
level: normal
type: init
output: console,tcp
logger config: level 1 type 3 output 5
Console log options: level 1 type 3
TCP log options: level 1 type 3
[ 21:50:25 ] [ Box detect ] Box type 4 (Dbox2)
[ 21:50:25 ] [ Config ] Option <blockc0> for device 0 (phoenix) not present, defaulting t
[ 21:50:25 ] [ Config ] Value in <ipk> for device 0 (phoenix) is INVALID, skipping...
[ 21:50:25 ] [ Config ] Value in <ucpk> for device 0 (phoenix) is INVALID, skipping...
[ 21:50:25 ] [ Config ] /dev/tts/0 ECM priority: round
[ 21:50:25 ] [ httpd ] httpd-user: Admin, password: 0815, accesslevel: admin
[ 21:50:25 ] [ EMM Cache ] Initialising dynamic Cache
[ 21:50:25 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 628
[ 21:50:25 ] [ Loader ] Starting Telnet on port 10001
[ 21:50:25 ] [ Loader ] Started HTTP-server on port: 8088
[ 21:50:25 ] [ Loader ] Reader type 2 on node /dev/tts/0
[ 21:50:25 ] [ Phoenix ] Opening device /dev/tts/0
[ 21:50:25 ] [ Phoenix ] Setting Parity to: EVEN
[ 21:50:25 ] [ Phoenix ] Setting 2 Stop bits on node /dev/tts/0
[ 21:50:25 ] [ Phoenix ] Setting Baud to standard 9600
[ 21:50:26 ] [ Phoenix ] Normal RESET on node /dev/tts/0
[ 21:50:27 ] [ Loader ] Unknown ****
[ 21:50:27 ] [ Loader ] Trying Irdeto (T=14)
[ 21:50:27 ] [ Loader ] Reader type 2 on node /dev/tts/0
[ 21:50:27 ] [ Phoenix ] Opening device /dev/tts/0
[ 21:50:27 ] [ Phoenix ] Setting Parity to: EVEN
[ 21:50:27 ] [ Phoenix ] Setting 2 Stop bits on node /dev/tts/0
[ 21:50:27 ] [ Phoenix ] Setting Baud to custom 5713
[ 21:50:28 ] [ Phoenix ] Normal RESET on node /dev/tts/0
[ 21:50:29 ] [ Loader ] Unknown ****
[ 21:50:29 ] [ NewCS ] Ready to GO! :)
/var #

---

mal aus einem Dialog mit mir und einem anderen User aus einem anderen Board:
Meine Antwort
Zitat an:
ich habe mal deine newcs.xml auf meiner Box laufen lassen und sie funktioniert. (allerdings mußte ich bei mir den Wert 600 auf 357 abändern.


hier mal die 3 Änderungen bei mir

<name>Phoenix Interface</name>
<type>dbox</type> der Wert dbox soll ja für´s Multicam stehen ?
<mhz>357</mhz> 600 funktioniert bei mir nicht
<node>/dev/tts/1</node> mein Multicam hat /dev/tts/1

ext. ****reader kann ich leider nicht testen, da ich kein kabel hier habe.

und so sieht deine aus

<name>Phoenix Interface</name>
<type>phoenix</type> und phoenix für ext. ****reader
<mhz>600</mhz>
<node>/dev/tts/0</node>

Hast du dir mal die Ausgabe bei telnet angeschaut ?

seine Antwort

LEUTE ICH HAB`S

Obwohl ich ein externer Reader habe mußte ich bei Typ dbox eingeben !!

Man Man 2 Tage wegen einem Wort

Dank euch für eure unterstützung!!!

Zitat aus:

capmtserver laäuft mit ?

Ich habe nun schon soviel probiert. Kann es sein, dass es an der Hardware liegt?

µMC, NG2 und Mastercrd Junior auprobiert. Alles ohne erfolg.

Die ganze Hardware ist von 2006 oder noch älter.Kann es daran liegen?

Hier mal meine aktuelle Konfiguration:

Mastercrd angeschlossen:

Code:

---

<newCSconfig>
        <readers name="Phoenix">
                <device>
                       
                        <name>phoenix</name>

                       
                        <type>phoenix</type>

                       
                        <mhz>357</mhz>

                       
                        <node>/dev/tts/0</node>

                       
                        <parity>even</parity>

                       
                        <reset>hard</reset>

                       
                        <export>Yes</export>

                       
                        <enabled>Yes</enabled>

                       
                        <blocksa>No</blocksa>

                       
                        <blockua>No</blockua>

                       
                        <blockga>No</blockga>
                       
                        <crypto-special>No</crypto-special>

                       
                        <boxkey>00000000</boxkey>

                       
                        <irdeto-camkey>0000000000000000</irdeto-camkey>

                       
                        <irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>

                       
                        <crypto-special>No</crypto-special>

                       
                        <ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>

                       
                        <ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>

                       
                        <PTShandshake>No</PTShandshake>

                       
                        <****detect>yes</****detect>

                       
                        <newcamd_port>34001</newcamd_port>

                       
                        <autosid>Yes</autosid>

                       
                        <Seca-PPV>no</Seca-PPV>

                       
                        <priority>round</priority>
                </device>
        </readers>
        <cache>
                       
                        <emm>20</emm>

                       
                        <ecm>-1</ecm>
        </cache>
        <debug>
                       
                        <mode>simple</mode>

                       
                        <level>normal</level>

                       
                        <type>init</type>

                       
                        <output>console,tcp</output>

                       
                        <console_options>normal,init</console_options>

                       
                        <tcp_port>10001</tcp_port>

                       
                        <tcp_options>normal,init</tcp_options>
        </debug>
        <newcamdserver>
                       
                        <enabled>Yes</enabled>

                       
                        <name>newcs</name>

                       
                        <deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>

                       
                        <user><status>access</status>
                               
                                <name>newcs1</name>

                               
                                <password>newcs</password>

                               
                                <hostname>192.168.1.8</hostname>

                               
                                <au>on</au>

                               
                                <sidoverride>off</sidoverride>

                               
                                <spider>off</spider>

                               
                                <rate>2</rate>
                        </user>
        </newcamdserver>
        <httpd>
<server>
<port>8088</port>
<enabled>yes</enabled>
</server>
<user>
<name>Admin</name>
<password>0815</password>
<accesslevel>admin</accesslevel>
</user></httpd></newCSconfig>

---

CCcam.cfg:

Code:

---

SERIAL READER : /dev/tts/0
N: 192.168.1.8 34001 newcs1 newcs 01 02 03 04 05 06 07 08 09 10 11 12 13 14

---

Und mein Telnet Log:

Code:

---

BusyBox v1.7.2 (2008-10-30 00:59:12 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.

/var # killall -9 newcs
/var # newcs
This is NewCS 1.62 - the New ****Server by the Butter-team..
Compiled on Aug 27 2008 at 16:49:31
Reading Config file from /var/tuxbox/config/newcs.xml
TCP-log password is disabled!
level: normal
type: init
output: console,tcp
logger config: level 1 type 3 output 5
Console log options: level 1 type 3
TCP log options: level 1 type 3
[ 22:16:16 ] [ Box detect ] Box type 4 (Dbox2)
[ 22:16:16 ] [ Config ] Option <blockc0> for device 0 (phoenix) not present, defaulting to NO
[ 22:16:16 ] [ Config ] Value in <ipk> for device 0 (phoenix) is INVALID, skipping...
[ 22:16:16 ] [ Config ] Value in <ucpk> for device 0 (phoenix) is INVALID, skipping...
[ 22:16:16 ] [ Config ] /dev/tts/0 ECM priority: round
[ 22:16:16 ] [ httpd ] httpd-user: Admin, password: 0815, accesslevel: admin
[ 22:16:16 ] [ EMM Cache ] Initialising dynamic Cache
[ 22:16:16 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 933
[ 22:16:16 ] [ Loader ] Starting Telnet on port 10001
[ 22:16:16 ] [ Loader ] Started HTTP-server on port: 8088
[ 22:16:16 ] [ Loader ] Reader type 2 on node /dev/tts/0
[ 22:16:16 ] [ Phoenix ] Opening device /dev/tts/0
[ 22:16:16 ] [ Phoenix ] Setting Parity to: EVEN
[ 22:16:16 ] [ Phoenix ] Setting 2 Stop bits on node /dev/tts/0
[ 22:16:16 ] [ Phoenix ] Setting Baud to standard 9600
[ 22:16:16 ] [ Phoenix ] Normal RESET on node /dev/tts/0
[ 22:16:18 ] [ Loader ] Unknown ****
[ 22:16:18 ] [ Loader ] Trying Irdeto (T=14)
[ 22:16:18 ] [ Loader ] Reader type 2 on node /dev/tts/0
[ 22:16:18 ] [ Phoenix ] Opening device /dev/tts/0
[ 22:16:18 ] [ Phoenix ] Setting Parity to: EVEN
[ 22:16:18 ] [ Phoenix ] Setting 2 Stop bits on node /dev/tts/0
[ 22:16:18 ] [ Phoenix ] Setting Baud to custom 5713
[ 22:16:18 ] [ Phoenix ] Normal RESET on node /dev/tts/0
[ 22:16:20 ] [ Loader ] Unknown ****
[ 22:16:20 ] [ NewCS ] Ready to GO! :)
/var #

---

Ich bin echt am verzweifeln. ! Woch beschäftige ich mich nun schon damit.

ruf mal dein Web Interface von newcs auf und sieh dir mal unter Reader was dort angezeigt wird
dort steht die Mhz Zahl die CAID die erkannt wird/ wenn es denn erkannt wird

die Karte wird nicht erkannt im Log, da hilft auch kein Webinterface.
mal auf 6MHZ starten oder 500
Der Karte macht es kurzzeitig nichts, andere fahren die dauerhaft auf 6MHZ.
Und dann den Log hier rein bitte.

Einen wunderschönen "Guten Morgen" alle zusammen.

So... dann wollen wir mal weiterschauen. (Wäre ja schön, wenn es klappen würde)

Habe noch mal überlegt. Also der Kartenleser ist von ca. 1999. Also schon sehr alt.

Folgendes nun geändert

Code:

---

<mhz>600</mhz>

---

Mastercrd junior auf Modus 0 = 6,00 Mhz

Und nun der/die/das Log:

Code:

---

BusyBox v1.7.2 (2008-10-30 00:59:12 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.

/var # killall -9 newcs
/var # newcs
This is NewCS 1.62 - the New ****Server by the Butter-team..
Compiled on Aug 27 2008 at 16:49:31
Reading Config file from /var/tuxbox/config/newcs.xml
TCP-log password is disabled!
level: normal
type: init
output: console,tcp
logger config: level 1 type 3 output 5
Console log options: level 1 type 3
TCP log options: level 1 type 3
[ 10:17:10 ] [ Box detect ] Box type 4 (Dbox2)
[ 10:17:10 ] [ Config ] Option <blockc0> for device 0 (phoenix) not present, defaulting to NO
[ 10:17:10 ] [ Config ] Value in <ipk> for device 0 (phoenix) is INVALID, skipping...
[ 10:17:10 ] [ Config ] Value in <ucpk> for device 0 (phoenix) is INVALID, skipping...
[ 10:17:10 ] [ Config ] /dev/tts/0 ECM priority: round
[ 10:17:10 ] [ httpd ] httpd-user: Admin, password: 0815, accesslevel: admin
[ 10:17:10 ] [ EMM Cache ] Initialising dynamic Cache
[ 10:17:10 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 9544
[ 10:17:10 ] [ Loader ] Starting Telnet on port 10001
[ 10:17:10 ] [ Loader ] Started HTTP-server on port: 8088
[ 10:17:10 ] [ Loader ] Reader type 2 on node /dev/tts/0
[ 10:17:10 ] [ Phoenix ] Opening device /dev/tts/0
[ 10:17:10 ] [ Phoenix ] Setting Parity to: EVEN
[ 10:17:10 ] [ Phoenix ] Setting 2 Stop bits on node /dev/tts/0
[ 10:17:10 ] [ Phoenix ] Setting Baud to custom 16129
[ 10:17:10 ] [ Phoenix ] Normal RESET on node /dev/tts/0
[ 10:17:12 ] [ Loader ] Unknown ****
[ 10:17:12 ] [ Loader ] Trying Irdeto (T=14)
[ 10:17:12 ] [ Loader ] Reader type 2 on node /dev/tts/0
[ 10:17:12 ] [ Phoenix ] Opening device /dev/tts/0
[ 10:17:12 ] [ Phoenix ] Setting Parity to: EVEN
[ 10:17:12 ] [ Phoenix ] Setting 2 Stop bits on node /dev/tts/0
[ 10:17:12 ] [ Phoenix ] Setting Baud to standard 9600
[ 10:17:12 ] [ Phoenix ] Normal RESET on node /dev/tts/0
[ 10:17:14 ] [ Loader ] Unknown ****
[ 10:17:14 ] [ NewCS ] Ready to GO! :)
/var #

---

Binderror, newcs wieder doppelt gestartet und Karte wird nicht erkannt. Normal reset scheint damit nicht zu laufen, deshalb der Hinweis das umzustellen.
Mit Parity odd probieren wäre auch noch ne Lösung

Mmmhhh ....

Alles durchprobiert.

Reset umgestellt (Steht im Log aber immer Normal reset. Auch wenn ich auf "hard" stelle)


Parity umgestellt

Es kommt immer "unknown ****"

<name>Phoenix Interface</name>
<type>phoenix</type>
<mhz>450</mhz>
<node>/dev/tts/0</node>
<parity>odd</parity>
<reset>inverse</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<!-- <boxkey>0000000000</boxkey> -->
<!-- <rsa>0000000000</rsa> -->
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</ipk>
<ucpk>00000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<****detect>yes</****detect>
<newcamd_port>34001</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
Versuch das mal bitte, den Part Device genau so übernehmen, und Log posten,thx
Wenn das auch nicht hilft, in welchem Modus steht der Reader???
achja, hast Du auch das richtige Kabel für den ****reader benutzt? welches Netzteil hängt dran?
Was zeigt die LCD Anzeige des Readers?

Der Reader steht auf "0" -> 6,00 MHz

Code:

---

BusyBox v1.7.2 (2008-10-30 00:59:12 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.

/var # killall -9 newcs
/var # newcs
This is NewCS 1.62 - the New ****Server by the Butter-team..
Compiled on Aug 27 2008 at 16:49:31
Reading Config file from /var/tuxbox/config/newcs.xml
[ 10:41:11 ] [ Box detect ] Box type 4 (Dbox2)
[ 10:41:11 ] [ Config ] Option <newcamd_port> for device 0 (Phoenix Interface) not present, defaulti
ng to 15050
[ 10:41:11 ] [ Config ] Option <blockc0> for device 0 (Phoenix Interface) not present, defaulting to
 NO
[ 10:41:11 ] [ Config ] Option <Seca-PPV> for device 0 (Phoenix Interface) not present, defaulting t
o NO
[ 10:41:11 ] [ Config ] Value in <ipk> for device 0 (Phoenix Interface) is INVALID, skipping...
[ 10:41:11 ] [ Config ] Value in <ucpk> for device 0 (Phoenix Interface) is INVALID, skipping...
[ 10:41:11 ] [ Config ] Option <cache> not present, defaulting EMM: 20, ECM: Dynamic
[ NewCS ] Process ID is: 20515
[ 10:41:13 ] [ NewCS ] Ready to GO! :)
/var #

---

Netzteil ist ein Universal-Netzteil und steht auf 12 V.

Tcha, das mit dem Kabel ist schon so eine Frage. Wenn ich das wüsste. Hatte hier nur noch ein Kabel rumfliegen, dass Buchse und Stecker hat.

Wie muss denn genau die Belegung sein, damit ich das mal durchmessen kann

Reader bitte auf 1= 3,57MHZ stellen und nochmal probieren.
wie viel Volt bekommt der Reader?
Mit den jetzigen Einstellungen wird der Reader gar nicht mehr erkannt, grml

Also alles nochmal zurück und Reader auf 3,57MHZ und die CFG bitte mit Logausgabe:

<device>
<name>phoenix</name>
<type>phoenix</type>
<mhz>450</mhz>
<node>/dev/tts/0</node>
<parity>even</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<crypto-special>No</crypto-special>
<boxkey>00000000</boxkey>
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</ipk>
<ucpk>00000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<****detect>yes</****detect>
<newcamd_port>34001</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<priority>round</priority>
</device>

Code:

---

BusyBox v1.7.2 (2008-10-30 00:59:12 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.

/var # killall -9 newcs
/var # newcs
This is NewCS 1.62 - the New ****Server by the Butter-team..
Compiled on Aug 27 2008 at 16:49:31
Reading Config file from /var/tuxbox/config/newcs.xml
[ 10:47:11 ] [ Box detect ] Box type 4 (Dbox2)
[ 10:47:11 ] [ Config ] Option <blockc0> for device 0 (phoenix) not present, defaulting to NO
[ 10:47:11 ] [ Config ] Value in <ipk> for device 0 (phoenix) is INVALID, skipping...
[ 10:47:11 ] [ Config ] Value in <ucpk> for device 0 (phoenix) is INVALID, skipping...
[ 10:47:11 ] [ Config ] /dev/tts/0 ECM priority: round
[ 10:47:11 ] [ Config ] Option <cache> not present, defaulting EMM: 20, ECM: Dynamic
[ NewCS ] Process ID is: 20534
[ 10:47:13 ] [ NewCS ] Ready to GO! :)
/var #

---

mehr kommt da nicht?

Mir fehlt das hier, das muss kommen, am besten Box mal reboot komplett:
[ 10:17:10 ] [ Phoenix ] Opening device /dev/tts/0
[ 10:17:10 ] [ Phoenix ] Setting Parity to: EVEN
[ 10:17:10 ] [ Phoenix ] Setting 2 Stop bits on node /dev/tts/0

Der Reader MUSS auf 3,57MHZ stehen, alles andere kann man später justieren, wenn die KArte mal erkannt wird. 6MHZ ist auf jeden Fall falsch.
Die Frage nach wieviel Volt der Reader bekommt und was auf dem LCD steht, fehlt mir noch, um helfen zu können.

Ne, mehr kommt da nicht.

7-Segment-Anzeige zeigt "1"
und bekommt 12 V

Code:

---

<newCSconfig>
        <readers name="Phoenix">
<device>
<name>phoenix</name>
<type>phoenix</type>
<mhz>450</mhz>
<node>/dev/tts/0</node>
<parity>even</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<crypto-special>No</crypto-special>
<boxkey>00000000</boxkey>
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</ipk>
<ucpk>00000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<****detect>yes</****detect>
<newcamd_port>34001</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<priority>round</priority>
</device>

---

Box habe ich neu gestartet

Code:

---

BusyBox v1.7.2 (2008-10-30 00:59:12 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.

/var # killall -9 newcs
/var # newcs
This is NewCS 1.62 - the New ****Server by the Butter-team..
Compiled on Aug 27 2008 at 16:49:31
Reading Config file from /var/tuxbox/config/newcs.xml
[ 10:50:58 ] [ Box detect ] Box type 4 (Dbox2)
[ 10:50:58 ] [ Config ] Option <blockc0> for device 0 (phoenix) not present, defaulting to NO
[ 10:50:58 ] [ Config ] Value in <ipk> for device 0 (phoenix) is INVALID, skipping...
[ 10:50:58 ] [ Config ] Value in <ucpk> for device 0 (phoenix) is INVALID, skipping...
[ 10:50:58 ] [ Config ] /dev/tts/0 ECM priority: round
[ 10:50:58 ] [ Config ] Option <cache> not present, defaulting EMM: 20, ECM: Dynamic
[ NewCS ] Process ID is: 521
[ 10:51:00 ] [ NewCS ] Ready to GO! :)
/var #

---

Kein ****reader erkannt.
Ist denn der Mode 1 auch wirklich 3,57MHZ?
Ich kenne das Gerät nicht, deshalb frag ich lieber :)
Sonst nimmt halt nochmal die erste NewCS CFG, mit dem der Reader ja zumindest erkannt wurde.
Achja 12 Volt ist "etwas" heftig, wie gepostet betreiben andere den mit 4,5-6Volt
Was Du noch probieren kannst ist eine ältere NewCS Version, 1.60 oder 1.20

Code:

---

<newCSconfig>
        <readers name="Phoenix">
                <device>
                        <name>phoenix</name>
                        <type>phoenix</type>
                        <mhz>450</mhz>
                        <node>/dev/tts/0</node>
                        <parity>even</parity>
                        <reset>hard</reset>
                        <export>Yes</export>
                        <enabled>Yes</enabled>
                        <blocksa>No</blocksa>
                        <blockua>No</blockua>
                        <blockga>No</blockga>
                        <crypto-special>No</crypto-special>
                        <boxkey>00000000</boxkey>
                        <irdeto-camkey>0000000000000000</irdeto-camkey>
                        <irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>
                        <crypto-special>No</crypto-special>
                        <ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>
                        <ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>
                        <PTShandshake>No</PTShandshake>
                        <****detect>yes</****detect>
                        <newcamd_port>34001</newcamd_port>
                        <autosid>Yes</autosid>
                        <Seca-PPV>no</Seca-PPV>
                        <priority>round</priority>
                </device>
        </readers>
        <cache>
                        <emm>20</emm>
                        <ecm>-1</ecm>
        </cache>
        <debug>
                        <mode>simple</mode>
                        <level>normal</level>
                        <type>init</type>
                        <output>console,tcp</output>
                        <console_options>normal,init</console_options>
                        <tcp_port>10001</tcp_port>
                        <tcp_options>normal,init</tcp_options>
        </debug>
        <newcamdserver>
                        <enabled>1</enabled>
                        <name>newcs</name>
                        <deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
                        <user><status>access</status>
                                <name>newcs1</name>
                                <password>newcs</password>
                                <hostname>192.168.1.8</hostname>
                                <au>on</au>
                                <sidoverride>off</sidoverride>
                                <spider>off</spider>
                                <rate>2</rate>
                        </user>
        </newcamdserver>
        <httpd>
<server>
<port>8088</port>
<enabled>yes</enabled>
</server>
<user>
<name>Admin</name>
<password>0815</password>
<accesslevel>admin</accesslevel>
</user></httpd></newCSconfig>

---

Code:

---

BusyBox v1.7.2 (2008-10-30 00:59:12 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.

/var # killall -9 newcs
/var # newcs
This is NewCS 1.62 - the New ****Server by the Butter-team..
Compiled on Aug 27 2008 at 16:49:31
Reading Config file from /var/tuxbox/config/newcs.xml
TCP-log password is disabled!
level: normal
type: init
output: console,tcp
logger config: level 1 type 3 output 5
Console log options: level 1 type 3
TCP log options: level 1 type 3
[ 11:18:00 ] [ Box detect ] Box type 4 (Dbox2)
[ 11:18:01 ] [ Config ] Option <blockc0> for device 0 (phoenix) not present, defaulting to NO
[ 11:18:01 ] [ Config ] Value in <ipk> for device 0 (phoenix) is INVALID, skipping...
[ 11:18:01 ] [ Config ] Value in <ucpk> for device 0 (phoenix) is INVALID, skipping...
[ 11:18:01 ] [ Config ] /dev/tts/0 ECM priority: round
[ 11:18:01 ] [ httpd ] httpd-user: Admin, password: 0815, accesslevel: admin
[ 11:18:01 ] [ EMM Cache ] Initialising dynamic Cache
[ 11:18:01 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 2217
[ 11:18:01 ] [ Loader ] Starting Telnet on port 10001
[ 11:18:01 ] [ Loader ] Started HTTP-server on port: 8088
[ 11:18:01 ] [ Loader ] Reader type 2 on node /dev/tts/0
[ 11:18:01 ] [ Phoenix ] Opening device /dev/tts/0
[ 11:18:01 ] [ Phoenix ] Setting Parity to: EVEN
[ 11:18:01 ] [ Phoenix ] Setting 2 Stop bits on node /dev/tts/0
[ 11:18:01 ] [ Phoenix ] Setting Baud to custom 12096
[ 11:18:01 ] [ Phoenix ] Normal RESET on node /dev/tts/0
[ 11:18:03 ] [ Loader ] Reset failed ...
[ 11:18:03 ] [ NewCS ] Ready to GO! :)
/var # [ 11:18:03 ] [ Loader ] Reader type 2 on node /dev/tts/0
[ 11:18:03 ] [ Phoenix ] Opening device /dev/tts/0
[ 11:18:03 ] [ Phoenix ] Setting Parity to: EVEN
[ 11:18:03 ] [ Phoenix ] Setting 2 Stop bits on node /dev/tts/0
[ 11:18:03 ] [ Phoenix ] Setting Baud to custom 12096
[ 11:18:03 ] [ Phoenix ] Normal RESET on node /dev/tts/0
[ 11:18:05 ] [ Loader ] Reset failed ...
[ 11:18:05 ] [ Loader ] Reader type 2 on node /dev/tts/0
[ 11:18:05 ] [ Phoenix ] Opening device /dev/tts/0
[ 11:18:05 ] [ Phoenix ] Setting Parity to: EVEN
[ 11:18:05 ] [ Phoenix ] Setting 2 Stop bits on node /dev/tts/0
[ 11:18:05 ] [ Phoenix ] Setting Baud to custom 12096
[ 11:18:05 ] [ Phoenix ] Normal RESET on node /dev/tts/0
[ 11:18:06 ] [ Loader ] Reset failed ...
[ 11:18:06 ] [ Loader ] Reader type 2 on node /dev/tts/0
[ 11:18:06 ] [ Phoenix ] Opening device /dev/tts/0
[ 11:18:06 ] [ Phoenix ] Setting Parity to: EVEN
[ 11:18:06 ] [ Phoenix ] Setting 2 Stop bits on node /dev/tts/0
[ 11:18:06 ] [ Phoenix ] Setting Baud to custom 12096
[ 11:18:06 ] [ Phoenix ] Normal RESET on node /dev/tts/0
[ 11:18:08 ] [ Loader ] Unknown ****
[ 11:18:08 ] [ Loader ] Trying Irdeto (T=14)
[ 11:18:08 ] [ Loader ] Reader type 2 on node /dev/tts/0
[ 11:18:08 ] [ Phoenix ] Opening device /dev/tts/0
[ 11:18:08 ] [ Phoenix ] Setting Parity to: EVEN
[ 11:18:08 ] [ Phoenix ] Setting 2 Stop bits on node /dev/tts/0
[ 11:18:08 ] [ Phoenix ] Setting Baud to custom 7200
[ 11:18:08 ] [ Phoenix ] Normal RESET on node /dev/tts/0
[ 11:18:09 ] [ Loader ] Unknown ****

---

OK, jetzt bitte nochmal das Ganze mit 3,57MHZ und Parity auf odd.

Wenns dann au net geht, hast Du noch eine andere Karte (egal ob gültig oder nicht zum testen?

hast Du mal ne ältere NewCS probiert wie angeraten?
Weil oben das Log ist ja noch 1.62, mal 1.60 oder ganz alt 1.20 testen

Habe noch mal zwei alte Prem. Karten ausprobiert. Auch "unknown ****".

Scheint wohl der Reader hinüber zu sein ...

Noch eine Frage/Möglichkeit

Ich habe die Prem-Karte mit einem Humax HD 1000 bekommen. In diesen auch die Karte freigeschaltet.

Hat nun eventuell ein Pairing stattgefunden? Und deshalb erkennt der Reader die Karte nicht?

nein, der Reader läuft wohl nicht.
Das kann ein falsches serielles Kabel sein, zu hohe Spannung oder schlicht defekt

@Hansie45

O.k. das denke ich auch mittlerweile.

Hast Du einen Tip für einen neuen Reader, den ich eventuell auch in Zukunft an meiner Fritzbox anschließen kann?

Wäre nett. Trotdem vielen Dank für die Hilfe. Ich werde dann erst wieder mit einem neuen MC oder Reader weitertesten.

Nochmals Danke ...