-
USB Festplatte wird von DM7020HD nicht erkannt
HI,
Habe DM7020HD mit Image Experimental 2015-06-18
Da meine interne HDD 1TB seit einiger Zeit immer mal bei Aufnahmen ruckelt, habe ich gedacht, ich schließe mal eine weitere HDD über USB an, mache ein Backup meiner aufgenommenen Filme und formatiere anschließend die interne, in der Hoffnung, dann ist alles wieder schick!!!
Wenn ich die externe USB-HDD (Ohne Stromversorgung) anschließe, kommt Fenster vom BLue Panel: "USB-Gerät erkannt", Fenster geht nach 6 Sekunden wieder zu, Platte ist aber nirgends zu sehen:
nicht unter: FILEBROWSER
nicht unter: EINSTELLUNGEN -> SYSTEM -> SPEICHERGERÄTE
Wie kriege ich die HDD zum Laufen?? Jemand eine Idee?
-
AW: USB Festplatte wird von DM7020HD nicht erkannt
Die USB-Platte braucht mehr Strom.
Entweder ein Netzteil anschließen oder Y-Kabel an zwei USB-Ports (oder aktiven HUB).
-
AW: USB Festplatte wird von DM7020HD nicht erkannt
Platte ist jetzt zu sehen. Beim Formatieren gibts aber FEhler: Unmount failes
-
AW: USB Festplatte wird von DM7020HD nicht erkannt
wie kann ich meine interne Festplattr formatieren? Ich habe Aussetzer bei einigen Aufnahmen. nach test habe ich jetzt komischerweise 2 hdds. bei der 1. steht "nicht unterstütztes tateisystem gefunden" bei der 2. steht "swap". dm nimmt aber nicht auf
-
AW: USB Festplatte wird von DM7020HD nicht erkannt
kann mir keiner helfen?
ich habe jetzt folgenden Stand
Blue Panel -> Gerätemanager -> Eine HDD ist vorhanden in 2 Partitionen (/dev/sda1 (930GB) und /dev/sda2 (1024MB) - beide sind eingehängt
Einstallungen-> System -> Aufnahmepfade -> Standard Speichergerät -> kein Gerät gewählt und auch nichts wählbar
PVR -> 198MD (D-)
Aufnahmen funktionieren nicht ! Ich bitte um Hilfe!
-
AW: USB Festplatte wird von DM7020HD nicht erkannt
Hat die Platte nun zusätzlich Strom?
Hänge mal beide angezeigten Platten aus und dann die Platte neu ein.
-
AW: USB Festplatte wird von DM7020HD nicht erkannt
Die Platte ist eingebaut.
Habe ausgehängt, neu eingegängt, neu gebootet . dann kommt Meldung: er findet kein Aufnahmegerät.
-
AW: USB Festplatte wird von DM7020HD nicht erkannt
Dann erstelle doch mal einen Bootlog. Den passenden virtuellen Treiber für die 7020HD gibt es hier.
CU rqs
-
AW: USB Festplatte wird von DM7020HD nicht erkannt
Hast Du Gemini mit drauf ?
-
AW: USB Festplatte wird von DM7020HD nicht erkannt
Klemm die Platte mal ab,schliese die an einen Rechner an und formatiere die mal mit den Tool " Portable-HPUSBDiskStorageFormatTool ". Danach wieder an der Dreambox anschliesen und die sollte erkannt und installiert werden können.
Portable-HPUSBDiskStorageFormatTool
-
AW: USB Festplatte wird von DM7020HD nicht erkannt
Gemini habe ich nicht drauf. Sollte ich es installieren. Wenn ja, wie?
Den Rest werde ich probieren
-
AW: USB Festplatte wird von DM7020HD nicht erkannt
Zitat:
Zitat von
mgrube
Gemini habe ich nicht drauf. Sollte ich es installieren. Wenn ja, wie?
Den Rest werde ich probieren
Nee, muss nicht zwingend. Wenn Du Gemini drauf gehabt hättest, hättest Du das über das BluePanel machen müssen, aber befolge mal den Rat von Dr. Dream.
-
AW: USB Festplatte wird von DM7020HD nicht erkannt
Ich habe gesehen, dass ich natürlich Gemini habe, habe ja auch BluePanel
ich habe jetzt folgendes gemacht
Habe HDD ausgebaut und mit Portable-HPUSBDiskStorageFormatTool formatiert
dann eingebaut, neu gebootet Platte wurde erkannt, habe sie mit BluePanel eingehängt
Kann aber nach wie vor nicht aufnehmen und unter
Einstallungen-> System -> Aufnahmepfade -> Standard Speichergerät -> kein Gerät gewählt und auch nichts wählbar
Scheint doch ein größeres Problem zu sein. Hoffe, es findet einer eine Lösung! Bitte Hilfe!
-
AW: USB Festplatte wird von DM7020HD nicht erkannt
Du solltest die Platte nicht im "Blue Panel" einhängen sondern unter " Menü/Einstellungen/System/Speichergeräte" dann brauchst du auch nichts unter "Aufnahmepfade" einstellen.
-
AW: USB Festplatte wird von DM7020HD nicht erkannt
Habe sie jetzt mit ...->Speichergeräte eingehängt, Danach kam Bluescreen -> neu gebootet und danach wird sie wieder nicht erkannt
hatte sie vor am windows-Rechner mit format (NTFS formatiert), weil Portable-HPUSBDiskStorageFormatTool brachte beim Formaieren "kann nicht formatieren - Festplatte ist schreibgeschützt!"
Was kann ich jetzt tun? Man muss das Ding doch irgendwie formatieren können, si dass DB sie erkennt, oder irre ich mich!
-
AW: USB Festplatte wird von DM7020HD nicht erkannt
Also wenn das Tool eine Fehler ausgibt dann stimmt was mit der Platte nicht und dann gibt es auch Probleme in der Dreambox.
-
AW: USB Festplatte wird von DM7020HD nicht erkannt
Ich verstehe nur nicht,dass sich die Platte ja ganz normal formatieren läßt!!!! Noch jemend eine Idee?
-
AW: USB Festplatte wird von DM7020HD nicht erkannt
Nimm m
als einen anderen Rechner oder Laptop zum formatieren...
-
AW: USB Festplatte wird von DM7020HD nicht erkannt
So nun bin ich mit meinem Latein am Ende! Ich hoffe dringend auf HILFE!
Ich habe die USB-Platte (mit Stromversorgung) extern in EXT3 formatiert. Ich dachte, das wäre die Lösung. ABER: Platte wird erkannt und eingehängt. NAch Neustart das belannte Problem "Standardaufnahmegerät nicht gefunden - OK + neu festlegen" Die USB HDD wird angezeigt mit 250GB - NICHT UNTERSTÜTZTES DATEISYSTEM GEFUNDEN! -> Nur INITIALISIREN wird angeboten, also gemacht ... nach gefühlten 30Minuten -> Fehler: CREATING PARTITION FAILED"!
Was ist da los? Was kann das sein?
Würde eine fabrikneue PLatte helfen????
-
AW: USB Festplatte wird von DM7020HD nicht erkannt
Versuch das mal
Mit Telnet:
mkfs.ext3 /dev/sda >> reboot
Unter Speichergeräte HDD initialisieren
Oder Google mal nach
eparted_0.13-r1_all
Das installieren und die HDD partitionieren !
Gruß gaso...
-
AW: USB Festplatte wird von DM7020HD nicht erkannt
Neuer Stand:
1. Mit Telnet:mkfs.ext3 /dev/sda >> reboot -> Fehler: mehr als eine Partition
2. eparted installiert -> gestartet -> Anzeige: Nr1 Start: 0GB Ende: 999GB Größe:999GB Typ ext3
Nr.2 Start:999GB Ende:1000GB Größe 1GB Typ: frei
Bei Nr.1 kein Löschen möglich
Bei Nr.2 -> Rot löschen -> Blau ausführen -> grün Start -> Fehler beim Befehl "parted -s -a none /def sda rm 2"
Was tun????
-
AW: USB Festplatte wird von DM7020HD nicht erkannt
Gebe mal im Telnet folgenden Befehl ein " df -h " und poste die Ausgabe hier.
-
AW: USB Festplatte wird von DM7020HD nicht erkannt
dm7020hd login: root
root@dm7020hd:~# [6ndreambox
-sh: dreambox: not found
root@dm7020hd:~# [6ndf -h
Filesystem Size Used Available Use% Mounted on
ubi0:rootfs 369.8M 173.4M 196.4M 47% /
devtmpfs 154.8M 0 154.8M 0% /dev
none 154.9M 440.0K 154.5M 0% /var/volatile
/dev/mtdblock2 7.0M 4.0M 3.0M 57% /boot
/dev/ubi0_1 536.8M 24.0K 532.0M 0% /data
/dev/sda1 930.2G 199.8M 930.0G 0% /media/572df58e-7de0-4686-8747-a8170a565b08
//192.168.1.17/Raid-2TB
1.8T 952.2G 895.3G 52% /media/net/Server
root@dm7020hd:~# [6n
-
AW: USB Festplatte wird von DM7020HD nicht erkannt
Zitat:
Zitat von
mgrube
/dev/sda1 930.2G 199.8M 930.0G 0% /media/572df58e-7de0-4686-8747-a8170a565b08
//192.168.1.17/Raid-2TB
1.8T 952.2G 895.3G 52% /media/net/Server
Hast du ein NAS gemountet ?
Gebe mal folgende Befehle ein.
Zitat:
umount -fl /dev/sda1
und dann
Zitat:
mkfs.ext3 /dev/sda1
-
AW: USB Festplatte wird von DM7020HD nicht erkannt
HI,
danke für die Hilfe. Habe meine Box neu geflsht. Jetzt funzt wieder alles!