Die Karte ist schon aktiviert, wieso versucht der das wieder zu aktivieren? ^^"
Druckbare Version
Die Karte ist schon aktiviert, wieso versucht der das wieder zu aktivieren? ^^"
Das ist nicht das selbe aktivieren was du meinst, er meint für OSCAM zu aktivieren. Und solange da keine Erkennung der Karte läuft geht nix.
Wie gesagt meine V13 läuft problemlos mit fast den selben Einstellungen (anderer Caid) in einer ollen Sagen dbox mit Selbstbau Multicam bei 3.57Mhz...
Kk
Hi, die Karte steckt aber im oberen Slot und richtig rum ? Ein paar mal rein raus stecken, eventuell Kontaktprobleme. Hast du jetzt ne aktuellere Oscam ?
Hi,
Kartei m oberen Slot, Chip unten und hinten und raus rein auch vollzogen.
Oscam ist nun das OSCAM 1.20-unstable_svn build #7222
und hat auch die Meldung: UNKNOWN (no entitlements)
Keiner mehr einen Tipp? :(
Gib halt nochmal ein komplettes Log inkl Start der Oscam und alle oscam config Files....
Kk
oscam.conf
oscam.serverCode:[monitor]
Port = 5555
aulow = 120
monlevel = 4
hideclient_to = 15
appendchaninfo = 1
[global]
nice = -1
WaitForCards = 1
preferlocalcards = 1
lb_mode = 0
lb_save = 150
logfile = /tmp/oscam.log;stdout
maxlogsize = 150
Saveinithistory = 1
disablelog = 1
[webif]
HttpPort = 8888
httprefresh = 10
HttpRefresh = 10
HttpAllowed = 127.0.0.1,192.168.0.0-192.168.255.255
#[newcamd]
#Key = 0102030405060708091011121314
#Keepalive = 1
#Port = 50001@098C:000000
[dvbapi]
enabled = 1
user = user1
socket = /tmp/camd.socket
oscam.userCode:[reader]
label = v14
protocol = internal
device = /dev/sci0
caid = 098C
boxid = 12345678
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,3,2
LogCode:[account]
User = user1
Pwd =
monlevel = 0
group = 1
au = 1
ReaderCode:2012/08/17 22:50:46 0 s starting thread log_list_thread
2012/08/17 22:50:46 0 s log_list_thread thread started
2012/08/17 22:50:47 0 s services reloaded: 0 services freed, 0 services loaded, rejected 0
2012/08/17 22:50:47 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2012/08/17 22:50:47 0 s signal handling initialized (type=sysv)
2012/08/17 22:50:48 0 s 775 service-id's loaded in 680ms
2012/08/17 22:50:48 0 s 3 tier-id's loaded
2012/08/17 22:50:48 0 s 4 provid's loaded
2012/08/17 22:50:48 0 s 0 lengths for caid guessing loaded
2012/08/17 22:50:48 0 s can't open whitelist file /var/tuxbox/config/oscam.whitelist
2012/08/17 22:50:48 0 s can't open cacheex-matcher file /var/tuxbox/config/oscam.cacheex
2012/08/17 22:50:48 0 s Starting listener 0
2012/08/17 22:50:48 0 s monitor: initialized (fd=5, port=5555)
2012/08/17 22:50:48 0 s Starting listener 0
2012/08/17 22:50:48 0 s camd35: disabled
2012/08/17 22:50:48 0 s Starting listener 0
2012/08/17 22:50:48 0 s cs378x: disabled
2012/08/17 22:50:48 0 s Starting listener 0
2012/08/17 22:50:48 0 s newcamd: disabled
2012/08/17 22:50:48 0 s Starting listener 0
2012/08/17 22:50:48 0 s pandora: disabled
2012/08/17 22:50:48 0 s Starting listener 0
2012/08/17 22:50:48 0 s csp: disabled
2012/08/17 22:50:48 0 s Starting listener 0
2012/08/17 22:50:48 0 s radegast: disabled
2012/08/17 22:50:48 0 s starting thread http
2012/08/17 22:50:48 0 s http thread started
2012/08/17 22:50:48 0 s starting thread reader check
2012/08/17 22:50:48 101627F8 h HTTP Server listening on port 8888
2012/08/17 22:50:48 0 s reader check thread started
2012/08/17 22:50:48 0 s starting thread check
2012/08/17 22:50:48 0 s check thread started
2012/08/17 22:50:48 0 s v14 [internal] creating thread for device /dev/sci0
2012/08/17 22:50:48 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/08/17 22:50:48 0 s waiting for local card init
2012/08/17 22:50:48 1017D0F8 r v14 [internal] ERROR: Opening device /dev/sci0 (errno:2 No such file or directory)
2012/08/17 22:50:48 1017D0F8 r v14 [internal] Cannot open device: /dev/sci0
2012/08/17 22:51:49 1017D0F8 r v14 [internal] ERROR: Opening device /dev/sci0 (errno:2 No such file or directory)
2012/08/17 22:51:49 1017D0F8 r v14 [internal] Cannot open device: /dev/sci0
2012/08/17 22:52:49 1017D0F8 r v14 [internal] ERROR: Opening device /dev/sci0 (errno:2 No such file or directory)
2012/08/17 22:52:49 1017D0F8 r v14 [internal] Cannot open device: /dev/sci0
Hide 0x1017d0f8 r 1 v14 ON OFF 127.0.0.1 0 internal 0000:0000 no data 00:02:22 UNKNOWN (no entitlements)
du versuchst auf /dev/sci0 zuzugreifen, das ist der Smartcardreader einer Dreambox...... das passt schonmal nicht
also änder das [reader] -> device wieder auf /dev/tts/1 und starte die Box neu und poste ein neues Log
KK
Und protocol mouse.
Hab das genommen was mir hier geschrieben wurde ^^"
Log:
Code:2012/08/18 01:55:43 0 s 0 lengths for caid guessing loaded
2012/08/18 01:55:43 0 s can't open whitelist file /var/tuxbox/config/oscam.whitelist
2012/08/18 01:55:43 0 s can't open cacheex-matcher file /var/tuxbox/config/oscam.cacheex
2012/08/18 01:55:43 0 s Starting listener 0
2012/08/18 01:55:43 0 s monitor: initialized (fd=5, port=5555)
2012/08/18 01:55:43 0 s Starting listener 0
2012/08/18 01:55:43 0 s camd35: disabled
2012/08/18 01:55:43 0 s Starting listener 0
2012/08/18 01:55:43 0 s cs378x: disabled
2012/08/18 01:55:43 0 s Starting listener 0
2012/08/18 01:55:43 0 s newcamd: disabled
2012/08/18 01:55:43 0 s Starting listener 0
2012/08/18 01:55:43 0 s pandora: disabled
2012/08/18 01:55:43 0 s Starting listener 0
2012/08/18 01:55:43 0 s csp: disabled
2012/08/18 01:55:43 0 s Starting listener 0
2012/08/18 01:55:43 0 s radegast: disabled
2012/08/18 01:55:43 0 s starting thread http
2012/08/18 01:55:43 0 s http thread started
2012/08/18 01:55:43 0 s starting thread reader check
2012/08/18 01:55:43 0 s reader check thread started
2012/08/18 01:55:43 0 s starting thread check
2012/08/18 01:55:43 0 s check thread started
2012/08/18 01:55:43 0 s v14 [mouse] creating thread for device /dev/tts/1
2012/08/18 01:55:43 1017C638 h HTTP Server listening on port 8888
2012/08/18 01:55:43 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/08/18 01:55:43 0 s waiting for local card init
2012/08/18 01:55:45 1017ADE8 r v14 [mouse] Reader initialized (device=/dev/tts/1, detect=cd, mhz=357, cardmhz=357)
2012/08/18 01:55:46 1017ADE8 r v14 [mouse] card detected
2012/08/18 01:55:56 1017ADE8 r v14 [mouse] Error activating card.
2012/08/18 01:56:07 1017ADE8 r v14 [mouse] Error activating card.
2012/08/18 01:56:18 1017ADE8 r v14 [mouse] Error activating card.
2012/08/18 01:56:19 1017ADE8 r v14 [mouse] card initializing error
2012/08/18 01:56:20 0 s init for all local cards done
2012/08/18 01:56:20 0 s anti cascading disabled
2012/08/18 01:56:20 1017EA78 c plain dvbapi-client granted (user1, au=auto (1 reader))
2012/08/18 01:56:20 1017EA78 c dvbapi: 8 entries read from oscam.dvbapi
2012/08/18 01:56:20 1017EA78 c dvbapi: found pmt file /tmp/pmt.tmp
2012/08/18 01:56:20 1017EA78 c dvbapi: [ADD PID 0] CAID: 1702 ECM_PID: 1742 PROVID: 000000
2012/08/18 01:56:20 1017EA78 c dvbapi: [ADD PID 1] CAID: 1722 ECM_PID: 1642 PROVID: 000000
2012/08/18 01:56:20 1017EA78 c dvbapi: [ADD PID 2] CAID: 1833 ECM_PID: 1842 PROVID: 000000
2012/08/18 01:56:20 1017EA78 c dvbapi: [ADD PID 3] CAID: 1834 ECM_PID: 1C42 PROVID: 000000
2012/08/18 01:56:20 1017EA78 c dvbapi: [ADD PID 4] CAID: 1836 ECM_PID: 1843 PROVID: 000000
2012/08/18 01:56:20 1017EA78 c dvbapi: [ADD PID 5] CAID: 09C4 ECM_PID: 1B42 PROVID: 000000
2012/08/18 01:56:20 1017EA78 c dvbapi: [ADD PID 6] CAID: 09C7 ECM_PID: 1D42 PROVID: 000000
2012/08/18 01:56:20 1017EA78 c dvbapi: [ADD PID 7] CAID: 09AF ECM_PID: 1F42 PROVID: 000000
2012/08/18 01:56:20 1017EA78 c dvbapi: [ADD PID 8] CAID: 098C ECM_PID: 1A42 PROVID: 000000
2012/08/18 01:56:20 1017EA78 c dvbapi: [ADD PID 9] CAID: 1861 ECM_PID: 1942 PROVID: 000000
2012/08/18 01:56:20 1017EA78 c dvbapi: new program number: 000A (Sky Cinema) [pmt_list_management 3]
2012/08/18 01:56:20 1017EA78 c dvbapi: try pids again #1
2012/08/18 01:56:20 1017EA78 c dvbapi: try pids again #2
2012/08/18 01:56:20 1017EA78 c dvbapi: try pids again #3
2012/08/18 01:56:20 1017EA78 c dvbapi: can't decode channel
Code:Readers 0/1
Hide 0x1017ade8 r 1 v14 ON OFF 127.0.0.1 0 mouse 0000:0000 no data 00:06:27 ERROR (no entitlements)
Clients 1/1 (0 with ECM within last 15 seconds)
Hide Kill c 1 user1 ON OFF 0.0.0.0 0 dvbapi 18.08.12 01:56:20 00:05:52 0000:0000 00:05:52 OK
So ich habe wieder den ganzen Mittag gesucht, es gibt aber so gut wie gar keine Antleitung betreffend dieses Themas :( komme einfach nicht weiter
Hi, ich denk es liegt am MC. Hast du eventuell noch ne Easymouse oder so.
ist eigentlich der multicam.o Treiber geladen ?
Ich hab gerade mal eine oscam Version 7271 ausgecheckt,kompiliert und auf die Dbox geschoben. Hier die Configs und ein Log :
oscam.confoscam.userCode:[global]
usrfile = /tmp/oscamuser.log
logfile = /tmp/oscam.log
cwlogdir = /tmp/cw
nice = -1
maxlogsize = 100
preferlocalcards = 1
saveinithistory = 1
[dvbapi]
enabled = 1
au = 1
boxtype = dbox2
user = local
[webif]
httpport = 83
httphelplang = de
httpallowed = 192.168.1.1-192.168.255.255
oscam.dvbapiCode:[account]
user = local
pwd =
description = User für DVBAPI
group = 1
au = 1
oscam.serverCode:P: 09C4 1
I: 0
Code:[reader]
label = multicam
description = dbox2 Multicam
protocol = mouse
device = /dev/tts/1
showcls = 0
caid = 09C4
boxid = 12345678
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
und hier noch ein das Log vom Start inkl. Smartcard
Code:-------------------------------------------------------------------------------
>> OSCam << cardserver started at Thu Jan 1 02:00:16 1970
-------------------------------------------------------------------------------
1970/01/01 02:00:16 0 s starting thread log_list_thread
1970/01/01 02:00:16 0 s log_list_thread thread started
1970/01/01 02:00:16 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #7271 (powerpc-tuxbox-linux-gnu)
1970/01/01 02:00:16 0 s version=1.20-unstable_svn, build #7271, system=powerpc-tuxbox-linux-gnu, nice=-1
1970/01/01 02:00:16 0 s client max. idle=120 sec, debug level=0, filter_sensitive=1
1970/01/01 02:00:16 0 s max. logsize=100 Kb, loghistorysize=4096 bytes
1970/01/01 02:00:16 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
1970/01/01 02:00:16 0 s The current system time is smaller than the build date (Aug 19 2012). Waiting up to 60 seconds for time to correct
2012/08/19 18:37:30 0 s Cannot open file "/var/tuxbox/config/oscam.services" (errno=2 No such file or directory)
2012/08/19 18:37:30 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2012/08/19 18:37:30 0 s signal handling initialized (type=sysv)
2012/08/19 18:37:30 0 s can't open file "/var/tuxbox/config/oscam.srvid" (err=2 No such file or directory), no service-id's loaded
2012/08/19 18:37:30 0 s can't open file "/var/tuxbox/config/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2012/08/19 18:37:30 0 s can't open file "/var/tuxbox/config/oscam.provid" (err=2 No such file or directory), no provids's loaded
2012/08/19 18:37:30 0 s can't open whitelist file /var/tuxbox/config/oscam.whitelist
2012/08/19 18:37:30 0 s Starting listener 0
2012/08/19 18:37:30 0 s camd35: disabled
2012/08/19 18:37:30 0 s starting thread http
2012/08/19 18:37:30 0 s http thread started
2012/08/19 18:37:30 0 s starting thread reader check
2012/08/19 18:37:30 0 s reader check thread started
2012/08/19 18:37:30 0 s starting thread check
2012/08/19 18:37:30 0 s check thread started
2012/08/19 18:37:30 0 s Binary without Nagra Module - no EMM processing for Nagra possible!
2012/08/19 18:37:30 0 s Binary without Irdeto Module - no EMM processing for Irdeto possible!
2012/08/19 18:37:30 0 s Binary without Conax Module - no EMM processing for Conax possible!
2012/08/19 18:37:30 0 s Binary without Seca Module - no EMM processing for Seca possible!
2012/08/19 18:37:30 0 s Binary without Viaaccess Module - no EMM processing for Viaaccess possible!
2012/08/19 18:37:30 0 s Binary without Dre Module - no EMM processing for Dre possible!
2012/08/19 18:37:30 0 s Binary without Tongfang Module - no EMM processing for Tongfang possible!
2012/08/19 18:37:30 0 s Binary without Bulcrypt Module - no EMM processing for Bulcrypt possible!
2012/08/19 18:37:30 0 s multicam [mouse] creating thread for device /dev/tts/1
2012/08/19 18:37:30 0 s waiting for local card init
2012/08/19 18:37:30 100E07F8 h HTTP Server listening on port 83
2012/08/19 18:37:32 100E7DC8 r multicam [mouse] Reader initialized (device=/dev/tts/1, detect=cd, mhz=357, cardmhz=357)
2012/08/19 18:37:33 100E7DC8 r multicam [mouse] card detected
2012/08/19 18:37:38 100E7DC8 r multicam [mouse] ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2012/08/19 18:37:39 100E7DC8 r multicam [mouse] Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2012/08/19 18:37:42 100E7DC8 r multicam [mouse] parental lock setting: FF FF FF FF
2012/08/19 18:37:42 100E7DC8 r multicam [mouse] type: VideoGuard Sky Germany (09C4), caid: 09C4
2012/08/19 18:37:42 100E7DC8 r multicam [mouse] serial: ########, BoxID: ########, baseyear: 2004
2012/08/19 18:37:42 100E7DC8 r multicam [mouse] ready for requests
2012/08/19 18:37:42 100E7DC8 r multicam [mouse] found cardsystem videoguard2
2012/08/19 18:37:42 100E7DC8 r multicam [videoguard2] card detected
2012/08/19 18:37:42 100E7DC8 r multicam [videoguard2] type: VideoGuard Sky Germany (09C4)
2012/08/19 18:37:43 100E7DC8 r multicam [videoguard2] tier: dfb9, expiry date: 2011/12/29-00:01:04
2012/08/19 18:37:43 100E7DC8 r multicam [videoguard2] tier: dde0, expiry date: 2011/12/29-00:01:04
2012/08/19 18:37:43 100E7DC8 r multicam [videoguard2] tier: e072, expiry date: 2011/12/30-00:01:04
2012/08/19 18:37:44 0 s init for all local cards done
2012/08/19 18:37:44 100EB158 c plain dvbapi-client granted (local, au=auto (1 reader))
2012/08/19 18:37:44 100EB158 c dvbapi: 2 entries read from oscam.dvbapi
2012/08/19 18:38:09 100EB158 c dvbapi: [ADD PID 0] CAID: 1702 ECM_PID: 1742 PROVID: 000000
2012/08/19 18:38:09 100EB158 c dvbapi: [ADD PID 1] CAID: 1722 ECM_PID: 1642 PROVID: 000000
2012/08/19 18:38:09 100EB158 c dvbapi: [ADD PID 2] CAID: 1833 ECM_PID: 1842 PROVID: 000000
2012/08/19 18:38:09 100EB158 c dvbapi: [ADD PID 3] CAID: 1834 ECM_PID: 1C42 PROVID: 000000
2012/08/19 18:38:09 100EB158 c dvbapi: [ADD PID 4] CAID: 1836 ECM_PID: 1843 PROVID: 000000
2012/08/19 18:38:09 100EB158 c dvbapi: [ADD PID 5] CAID: 09C4 ECM_PID: 1B42 PROVID: 000000
2012/08/19 18:38:09 100EB158 c dvbapi: [ADD PID 6] CAID: 09C7 ECM_PID: 1D42 PROVID: 000000
2012/08/19 18:38:09 100EB158 c dvbapi: [ADD PID 7] CAID: 09AF ECM_PID: 1F42 PROVID: 000000
2012/08/19 18:38:09 100EB158 c dvbapi: [ADD PID 8] CAID: 098C ECM_PID: 1A42 PROVID: 000000
2012/08/19 18:38:09 100EB158 c dvbapi: [ADD PID 9] CAID: 1861 ECM_PID: 1942 PROVID: 000000
2012/08/19 18:38:09 100EB158 c dvbapi: new program number: 000A (1702:000A unknown) [pmt_list_management 3]
2012/08/19 18:38:10 100EB158 c dvbapi: Start descrambling PID #5 (CAID: 09C4) 1
2012/08/19 18:38:10 100EB158 c local (09C4&000000/0000/000A/90:7E6B): found (665 ms) by multicam - 09C4:000A unknown
2012/08/19 18:38:17 100EB158 c local (09C4&000000/0000/000A/90:9499): found (579 ms) by multicam - 09C4:000A unknown
2012/08/19 18:38:27 100EB158 c local (09C4&000000/0000/000A/90:1AE2): found (575 ms) by multicam - 09C4:000A unknown
2012/08/19 18:38:28 100E7DC8 r multicam [videoguard2] local emmtype=global, len=47, idx=0, cnt=1: written (217 ms)
2012/08/19 18:38:37 100EB158 c local (09C4&000000/0000/000A/90:FB0D): found (576 ms) by multicam - 09C4:000A unknown
2012/08/19 18:38:40 100E7DC8 r multicam [videoguard2] local emmtype=global, len=32, idx=1, cnt=1: written (189 ms)
2012/08/19 18:38:47 100EB158 c local (09C4&000000/0000/000A/90:96C0): found (580 ms) by multicam - 09C4:000A unknown
2012/08/19 18:38:49 100E7DC8 r multicam [videoguard2] local emmtype=global, len=135, idx=2, cnt=1: written (350 ms)
2012/08/19 18:38:49 100E7DC8 r multicam [videoguard2] local emmtype=global, len=43, idx=3, cnt=1: written (197 ms)
2012/08/19 18:38:57 100EB158 c local (09C4&000000/0000/000A/90:8B8D): found (577 ms) by multicam - 09C4:000A unknown
2012/08/19 18:39:01 100E7DC8 r multicam [videoguard2] local emmtype=global, len=32, idx=4, cnt=1: written (177 ms)
2012/08/19 18:39:07 100EB158 c local (09C4&000000/0000/000A/90:04B9): found (570 ms) by multicam - 09C4:000A unknown
2012/08/19 18:39:10 100E7DC8 r multicam [videoguard2] local emmtype=global, len=43, idx=5, cnt=1: written (187 ms)
2012/08/19 18:39:17 100EB158 c local (09C4&000000/0000/000A/90:EC73): found (583 ms) by multicam - 09C4:000A unknown
2012/08/19 18:39:23 100E7DC8 r multicam [videoguard2] local emmtype=global, len=32, idx=6, cnt=1: written (173 ms)
2012/08/19 18:39:27 100EB158 c local (09C4&000000/0000/000A/90:0E1C): found (567 ms) by multicam - 09C4:000A unknown
2012/08/19 18:39:32 100E7DC8 r multicam [videoguard2] local emmtype=global, len=44, idx=7, cnt=1: written (203 ms)
2012/08/19 18:39:37 100EB158 c local (09C4&000000/0000/000A/90:D291): found (579 ms) by multicam - 09C4:000A unknown
2012/08/19 18:39:41 100EB158 c dvbapi: new program number: 6DCA (0000:6DCA unknown) [pmt_list_management 3]
Wenn du die Configs übernehmen willst mußt du nur 2 kleine Änderungen machen. Du mußt in der oscam.dvbapi und in der oscam.server die CAID von 09C4 in 098C ändern, eventuell noch den Webinterface Port in der oscam.conf. Das ist eine absolut minimalistische Config, da sind keine service/profid/sonstwas Spielchen drin, das muß so funktionieren, wenn das Multicam auf 3,57Mhz läuft und das kernelmodul multicam.o geladen ist.
KK
Habe alles gemacht wie beschrieben - dunkel- :(
multicam.o Treiber , keine Ahnung ^^" wie gesagt, ich habe die Box damals so gekauft wie sie nun ist und versuche nun meine neu erworbene V14 Karten zum laufen zu bekommen :(
Und der Reader hat wieder den Error: ERROR (no entitlements)Code:2012/08/19 21:38:42 0 s 0 lengths for caid guessing loaded
2012/08/19 21:38:42 0 s can't open whitelist file /var/tuxbox/config/oscam.whitelist
2012/08/19 21:38:42 0 s can't open cacheex-matcher file /var/tuxbox/config/oscam.cacheex
2012/08/19 21:38:42 0 s Starting listener 0
2012/08/19 21:38:42 0 s monitor: disabled
2012/08/19 21:38:42 0 s Starting listener 0
2012/08/19 21:38:42 0 s camd35: disabled
2012/08/19 21:38:42 0 s Starting listener 0
2012/08/19 21:38:42 0 s cs378x: disabled
2012/08/19 21:38:42 0 s Starting listener 0
2012/08/19 21:38:42 0 s newcamd: disabled
2012/08/19 21:38:42 0 s Starting listener 0
2012/08/19 21:38:42 0 s pandora: disabled
2012/08/19 21:38:42 0 s Starting listener 0
2012/08/19 21:38:42 0 s csp: disabled
2012/08/19 21:38:42 0 s Starting listener 0
2012/08/19 21:38:42 0 s radegast: disabled
2012/08/19 21:38:42 0 s starting thread http
2012/08/19 21:38:42 0 s http thread started
2012/08/19 21:38:42 0 s starting thread reader check
2012/08/19 21:38:42 0 s reader check thread started
2012/08/19 21:38:42 0 s starting thread check
2012/08/19 21:38:42 0 s check thread started
2012/08/19 21:38:42 0 s multicam [mouse] creating thread for device /dev/tts/1
2012/08/19 21:38:42 1017C980 h HTTP Server listening on port 8888
2012/08/19 21:38:42 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/08/19 21:38:42 0 s waiting for local card init
2012/08/19 21:38:45 1017B130 r multicam [mouse] Reader initialized (device=/dev/tts/1, detect=cd, mhz=357, cardmhz=357)
2012/08/19 21:38:45 1017B130 r multicam [mouse] card detected
2012/08/19 21:38:56 1017B130 r multicam [mouse] Error activating card.
2012/08/19 21:39:07 1017B130 r multicam [mouse] Error activating card.
2012/08/19 21:39:18 1017B130 r multicam [mouse] Error activating card.
2012/08/19 21:39:18 1017B130 r multicam [mouse] card initializing error
2012/08/19 21:39:19 0 s init for all local cards done
2012/08/19 21:39:19 0 s anti cascading disabled
2012/08/19 21:39:19 10183608 c plain dvbapi-client granted (local, au=auto (1 reader))
2012/08/19 21:39:19 10183608 c dvbapi: 2 entries read from oscam.dvbapi
2012/08/19 21:39:19 10183608 c dvbapi: found pmt file /tmp/pmt.tmp
2012/08/19 21:39:19 10183608 c dvbapi: [ADD PID 0] CAID: 1702 ECM_PID: 1742 PROVID: 000000
2012/08/19 21:39:19 10183608 c dvbapi: [ADD PID 1] CAID: 1722 ECM_PID: 1642 PROVID: 000000
2012/08/19 21:39:19 10183608 c dvbapi: [ADD PID 2] CAID: 1833 ECM_PID: 1842 PROVID: 000000
2012/08/19 21:39:19 10183608 c dvbapi: [ADD PID 3] CAID: 1834 ECM_PID: 1C42 PROVID: 000000
2012/08/19 21:39:19 10183608 c dvbapi: [ADD PID 4] CAID: 1836 ECM_PID: 1843 PROVID: 000000
2012/08/19 21:39:19 10183608 c dvbapi: [ADD PID 5] CAID: 09C4 ECM_PID: 1B42 PROVID: 000000
2012/08/19 21:39:19 10183608 c dvbapi: [ADD PID 6] CAID: 09C7 ECM_PID: 1D42 PROVID: 000000
2012/08/19 21:39:19 10183608 c dvbapi: [ADD PID 7] CAID: 09AF ECM_PID: 1F42 PROVID: 000000
2012/08/19 21:39:19 10183608 c dvbapi: [ADD PID 8] CAID: 098C ECM_PID: 1A42 PROVID: 000000
2012/08/19 21:39:19 10183608 c dvbapi: [ADD PID 9] CAID: 1861 ECM_PID: 1942 PROVID: 000000
2012/08/19 21:39:19 10183608 c dvbapi: new program number: 000A (Sky Cinema) [pmt_list_management 3]
2012/08/19 21:39:19 10183608 c dvbapi: try pids again #1
2012/08/19 21:39:19 10183608 c dvbapi: try pids again #2
2012/08/19 21:39:19 10183608 c dvbapi: try pids again #3
2012/08/19 21:39:19 10183608 c dvbapi: can't decode channel
Sollte ich auch die Oscam 7271 installieren? Wenn ja, wie mach ich das? Egal welche ich suche, Keywelt will sie dann nicht starten lassen :(
Kann mir denn keiner helfen :(