gleiche Netzwerkeinstellung ,was sagt MCC ?
Druckbare Version
gleiche Netzwerkeinstellung ,was sagt MCC ?
ja, mit gleichen netzwerk einstellungen
MCC hat das gleiche gesagt, wie bei meiner Kathi mit MME Image, hab jetzt auch diese wieder angesteckt.
Ich will ja nicht nerven, aber könnte ich hier nochmal meine configuration zur durchsicht reinstellen ?
Wenn du kurz zeit hättest sie durch zu sehen, wäre das sehr net.
Wenn ja welche soll ich alle vorzeigen.
Danke
warum sind sie nicht dabei ???:gruebel:
cwshare.cfg von D-Box und Kathi
auf der DBox2:
mpcs.conf:
Code:
[global]
Nice = -15
ClientTimeout = 5
ClientMaxIdle = 60
CacheDelay = 0
FallbackTimeout = 2
BindWait = 60
ResolveDelay = 30
DyndnsInterval = 120
LogFile = /var/log/mpcs.log
MaxLogSize = 1024
Sleep = 0
showecmdw = 0
showemmdw = 0
disablecache1 = 0
disablecache2 = 0
disablecache = 0
Filter = 0
[monitor]
Port = 988
NoCrypt = 127.0.0.1
NoCrypt = 10.0.0.0-10.255.255.255
NoCrypt = 172.16.0.0-172.31.255.255
NoCrypt = 192.168.0.0-192.168.255.255
AULow = 120
MonLevel = 4
#Port 15005 & 15000 f¸r die newcamd Clients
[newcamd]
Key = 0102030405060708091011121314
Port = 15005@1702:FFFFFF;15000@1833:FFFFFF
# F¸r Sat reicht bei mir ein Port, da mpcs die PW HD Caids (1833) automatisch auf 1702 mappt.
#f¸r andere Karten CAIDs bzw. PW ¸ber Kabel, braucht ihr dann eventuell mehr Ports.
#Port 15003 f¸r camd3 Clients
#[cs357x]
#Port = 15003
mpcs.reader:
[reader]
#blockemm = C0,03,02
blockua = 0
blockga = 0
blocksa = 0
AU = 1
Enable = 1
Label = multicam
Protocol = mouse
Device = /dev/tts/1
##pincode = 7291
#BaudRate = 16000
#bits = 7/8
#stopbits = 1/2
##parity = odd/even/none
##flowcontrol= hard/soft/none
PTS = 1
EMMCache = 1,3,2
Detect = CD
Group = 1
Fallback = 0
CAID = 1702,1833
mpcs.user:
[account]
User = glj
Pwd = ncs
Uniq = 1
Group = 1
CAID = 1702,1833
MonLevel = 4
[account]
User = Kathi
Pwd = Kathi
Uniq = 1
Group = 1
AU = multicam
MonLevel = 4
[account]
User = User1
Pwd = Pass1
Uniq = 1
Group = 1
AU = multicam
MonLevel = 4
[account]
User = dummy
Pwd = dummy
Uniq = 1
Group = 1
AU = multicam
MonLevel = 4
mbox.cfg
[account]
User = glj
Pwd = ncs
Uniq = 1
Group = 1
CAID = 1702,1833
MonLevel = 4
[account]
User = Kathi
Pwd = Kathi
Uniq = 1
Group = 1
AU = multicam
MonLevel = 4
mbox.cfg
//mbox.cfg EXPLANATION and EXAMPLES
D: { 1 }
//x=0 -> disable
//x=1 -> enable dbox2 cw writing
//x=2 -> enable STAPI for IPBOX
//x=3 -> enable STAPI for Kathrein
//default disabled
B: { 0 }
//B: { x }
//x=0 -> disable local UDP ports 8004-80xx ,this ports are used with DVB cards and gbox plugin (Windows and Linux)
//x=1 -> enable
//default disable
#Z: { 12 } { 127.0.0.1 8000 }
Z: { 11 } { 192.168.178.3 8080 }
// Z option -> control sending/writing current informations
// Z: { xy } { IP port }
// x=0 -> don't print time stamp (in console screen and in debug file)
// x=1 -> print time stamp ( .... )
// y=0 -> no writing/sending informations to debug file/destination IP
// y=1 -> send informations to destination IP but not in debug file
// y=2 -> write informations to debug file but don't send to destination IP
// y=3 -> write/send informations to debug file/destination IP
// IP port -> destination IP and UDP port where to send informations
// no default
#C: { 127.0.0.1 7999 }
// C option -> control receiving some command messages localy or from another IP
// C: { IP port }
// IP-> your local IP or you DNS
// port -> on what port you will be waiting command messages
// no default
U: { 1 }
// U options -> Update peer(s) IP if it changes while peer still resending ecm's/cw etc.. information
// default only on hello message peer(s) IP are updated !!!
// U: { x }
// x=0 -> disabled
// x=1 -> enabled
// default disabled
L: { 1 }
// L option -> how mbox to menage virtual card(s) with level 0
// ( only for peer(s) who have and can reshare virtual cards but don't want to use LEVEL 0 card(s) for them self)
// L: { x }
// x=0 -> don't load any virtual cards with LEVEL 0, you can't use them for your self
// x=1 -> load all virtual cards with LEVEL 0 ,you will be using them for your self
// default 1
F: { 500 }
//F option -> reset writing debug.txt from begining if file size is higher then (x)(KB)
//F { x } -> decimal in KBytes
//default 500 KB
#G: { /hdd/ }
//G option -> redirect writing ONLY debug.txt file to internal or external HDD in receivers or for any other reason.
//Remove #, ONLY if you want to use this option !!!!!!!
T: { /tmp/ }
// T option -> where to store temp files ... (share.info,debug.txt ,etc.)
// T: { folder_path_to_files, example: T: { /tmp/ } }
K: { /var/keys/ }
// K option -> where is cwshare.cfg file
// K: { folder_path_to_files, example: K: { /var/keys/ } }
E: { 1 }
// E option -> disable same cards from peers
// E: { x }
// x=0 -> use same cards(boxids) from peers
// x=1 -> don't use same cards(boxids) from peers
// default 1
M: { 1 }
// M option -> Mode option
// M: { x }
// x=0 -> local mode no NET
// x=1 -> NET mode
// default 0
P: { /tmp/pmt.tmp }
// P option -> PMT location (Dont used with linux and windows)
// you must be tuned to channel so image can generate this file
// { /tmp/pmt.tmp } for resivers and images that create this file <- use this if you can
// { 1/tmp/camd.socket } for enigma 1
// { 2/tmp/camd.socket } for enigma 2
W: { 0 }
// W option -> write raw ECM to ecm.raw file
// W: { x }
// x=0 -> disabled
// x=1 -> enabled
// default disabled
H: { 0 }
//H option -> C line priority over network cards
// H: { x }
// x=0 -> disabled -> newtwork cards has priority over your local cards
// x=1 -> enabled -> your local cards has priority over network cards
// default disabled
Q: { 30 }
//Q option -> newcamd connect retry in sec.
//Q: { x }
// default 300 sec.
cwshare.cfg:
M: { 192.168.178.10 { FA1BC9F9 }}
O: { 2000 2000 }
D: { 192.168.178.5 { 8006 7005 { FA5BDEFE { A3 A3 }}}}
C: { 127.0.0.1 15000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 } { 10 } { 1702FFFF:17020000 }
C: { 127.0.0.1 15001 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 } { 10 } { 1833FFFF:18330000 }
und die cwshare auf der Kathi (serverbox)
I: { 04 }
N: { 00 01 03 1F 3000 5000 }
X: { 05 }
O: { 2000 2000 }
M: { 192.168.178.5 { FA5BDEFE }}
D: { 192.168.178.10 { 7005 8006 { FA1BC9F9 { A3 A3 }}}}
{ 0000 } { 0 } send filter
{ 0000 } { 0 } receive filter
So, das war viel, sorry
und im MPCS monitor kommt:
1 encrypted newcamd:15000-client 127.0.0.1 garanted (dummy, au=multicam,G
2 encrypted monitor client 127.0.0.1 garanted (glj lvl=4, pid=450)
was heist das eigentlich?
Änder mal B: { 0 } -> B: { 1 }
Hab ich geändert hat aber leider auch nichts gebracht
Nimm mal bitte dieses Image ,kopier da einfach die cwshare.cfg rein ,die Du hast ,sichere vorher Dein Image !
image
ups ich glaube jetzt muß ich die Kathi wieder herstellen, ich hab´s mit mutipart installer geflashed lief auf durch, aber jetzt blinkt das display zuwischen Kathrein ufs 910 Flash und booting.
Das image hat 8.3 MB, oder?
Beim recovery tool mit deinem image kommt wrong file size
Das Image ist für die D-Box ,nicht für die Kathi !
shit !!, bin ich doof aber die Kathi ist schon wieder fit!! hehe
Dann nochmal auf die dbox
Danke noch mal für das image aber es passt nicht ich hab nur 1x flash
gabs da nicht mal so einen Konverter .
imagecloner
Ja der Image cloner.
Ich habe jetzt die DBox ganz neu geflashed und Dupkat mpcs, cccam und mbox wieder am laufen.
Auf der Kathi habe ich jetzt Hot summer.
Heute Abend versuche ich´s mal so.
Wenns wieder nicht geht, werde ich dem Imagecloner mal versuchen.
:454::454::454::454::454::454::454::454::454::454: :454::454::454::454::454::164::164::164::164::164: :164::164::164::164::164::164::164::164::164::164: :5::5::5::5::5::5::5::5::5::5::5::5::5::5::5::5::5 ::5::5::5::5::5::5::5::5::5::hand::hand::hand::han d::hand::hand::hand::hand::hand::hand::hand::hand: :2::2::2::2::2::2::2::2::2::2::2::2::2::2::2::2::2 ::2::2::2::2::2::2::2::2::2::2:
Ich werd verrückt es funktioniert !!
Wenn du mir verrätst wo du wohnst, kehr ich dir den Hof und mäh dir den Rasen :-)
Wie schon gesagt ich hab jetzt die Dbox gestern noch mal neu gemacht und der Kathi hab ich Hot Summer verpasst. Aber eigentlich alles gleich wie beim ersten mal.
Nur eine kleine sache noch die HD Sender gehen noch nicht.
Kann ich da auch noch was gegen tun? bzw. kannst du mir da noch einen Tip geben.
Aber ein dickes Danke von mir !!!
Hast Du jetzt Dein ,oder mein Image drauf ? Deine MPCS sieht ein bissel komisch aus nimm mal meines ,vergiss aber nicht Deines zu sichern.