MGCAMD und Multicam

Versuche mit den MGCAMD 1.20 den Kartenslot im Multicam zu bedienen.
Leider ohne Erfolg.
Habe auch NewCS schon installiert, weil ich gelesen hatte, das man den braucht um den Kartenslot zu bedienen, weil es direkt unter mgcamd nicht geht.
Was muss ich jetzt alles am MGCAMD und am NewCS einstellen um es zum laufen zu bekommen?
Würde mich über genaue Beschreibung der Einstellungsoptionen freuen.
Habe dazu auch noch nix hier gelesen. nur zu camd3 und um diesen geht es mir ja nicht.

keiner so richtig eine Lösung?

Es muss doch einer von euch wissen, wie ich newcs unter mgcamd aktivieren kann.

Habe hier mal den Log vom mgcamd config.

Was muss ich hier einstellen, damit er zugreift auf newcs?
Was ist falsch?

# EMM messages
# 00 don't show any EMM's (default)
# 01 show only valid EMM's
# 02 show valid and bad EMM's with complete data display
M: { 01 }

# ECM messages
# 00 don't show any ECM's
# 01 show only valid ECM's (default)
# 02 show valid and bad ECM's with complete data display
C: { 01 }

# AU
# 00 is ignored (default)
# 01 enable AU
# 02 AU Auto
A: { 02 }

# key update
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
U: { 01 }

# key files folder
# 00 keyfiles in /var/keys
# 01 keyfiles in /var/tmp
T: { 00 }

# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
G: { 00 }

# network retry, use summ for several options
# 00 disable (default)
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
N: { 00 }

# network ecm timeout in seconds
K: { 10 }

# newcamd dead routes connect retry, sec
Q: { 600 }

# network shares priority
# 00 newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd
# 02 newcamd, camd3, radegast
P: { 00 }

# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
O: { 00 }

# on screen display Options
# 03 default
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
S: { 03 }

# Log options
# 00 Off (default)
# 01 Network
# 02 console
# 03 both
L: { 02 } 172.16.1.1 28007

# cache ecm pids and data used to open channels,
# store pids in /tmp/ca_cache.list at exit, load at startup,
# same syntax as restore.list
# 00 Off (default)
# 01 Ecm pids cache
# 02 Ecm data cache
# 03 both caches
H: { 00 }

# reread files on zap:
# 00 No (default)
# 01 config (including priority and ignore, but not replace/cache)
# 02 config and keys
# 03 both
R: { 00 }

# debug
# 00 off (default)
# 01 on
D: { 00 }

# box type
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
B: { 01 }

Habe euch vielleicht um eine Lösung zu finden die Telnet Logs und die xml´s angehängt.
Von newcs.xml und mg.config.

~ # /var/emu/newcs
Reading Config file from /var/tuxbox/config/newcs.xml
TCP-log password is disabled!
level: normal
type: init
output: all
logger config: level 1 type 3 output 255
log file:
logger: cant open file , file log disabled
udp log: host 192.168.1.10 port 1000
tcp port: 3001
[ 01:17:10 ] [ Box detect ] Box type 4
[ 01:17:10 ] [ Config ] Option <Seca-PPV> for device 0 (multicam) not present, d
efaulting to NO
[ 01:17:10 ] [ Config ] /dev/tts/1 ECM priority: round
[ 01:17:10 ] [ Config ] Option <autosid> for device 0 (multicam) not present, de
faulting to NO
[ 01:17:10 ] [ Config ] No SIDFILTER is configured, disabling SidOverride for de
vice 0 (multicam)!
[ 01:17:10 ] [ Config ] Option <hostname> or <port> not present for User: dummy,
DISABLING reverse login
[ 01:17:10 ] [ Config ] Option <spider> not present for User: dummy, defaulting
to NO
[ 01:17:10 ] [ Config ] Option <sidoverride> not present for User: dummy, defaul
ting to OFF
[ 01:17:10 ] [ Config ] Option <readers> not present for User: dummy, NO reader
control enabled
[ 01:17:10 ] [ Config ] Option <hostname> or <port> not present for User: User1,
DISABLING reverse login
[ 01:17:10 ] [ Config ] Option <spider> not present for User: User1, defaulting
to NO
[ 01:17:10 ] [ Config ] Option <sidoverride> not present for User: User1, defaul
ting to OFF
[ 01:17:10 ] [ Config ] Option <readers> not present for User: User1, NO reader
control enabled
[ 01:17:11 ] [ Config ] Option <au> not present for User: User2, defaulting to O
FF
[ 01:17:11 ] [ Config ] Option <sidoverride> not present for User: User2, defaul
ting to OFF
[ 01:17:11 ] [ Config ] Option <readers> not present for User: User2, NO reader
control enabled
[ 01:17:11 ] [ EMM Cache ] Initialising Cache with 10 entries
[ 01:17:11 ] [ ECM Cache ] Initialising Cache with 10 entries
[ NewCS ] Process ID is: 259
[ 01:17:11 ] [ Loader ] Reader type 4 on node /dev/tts/1
[ 01:17:11 ] [ Dbox ] Opening device /dev/tts/1
failed to open/dev/rtscts: No such file or directory
rtscts device: Invalid argument
rtscts device: Bad file descriptor
[ 01:17:12 ] [ Loader ] Reset failed ...
[ 01:17:12 ] [ Loader ] Starting Newcamd Server on port 10001
[ 01:17:12 ] [ NewCS ] Ready to GO! smile
~ #

Und der mgcamd Log:

Philips D-BOX2 - Kernel 2.4.33.3-dbox2 (01:23:29).
dbox login: root

BusyBox v1.2.1 (2006.12.20-16:18+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

~ # /var/emu/mgcamd
tuxbox mgcamd v1.20 by mixvt (compiled Feb 13 2007 22:33:13)
[mg] Net:1:0:0:10s Show ecm:1, emm:1 Up:1 Au:2 Dir:0 Osd:no:80:3 Cache:0 Log:2:1
72.16.1.1:28007 Reread:0
[mg] Ecm cache time: 15
Box type: dbox2
/dev/dvb/adapter0/ca1 error 16: Device or resource busy
~ # Keys readed
[config] newcamd route = local:127.0.0.1:10001 server cardserv
newcamd keep alive: 0, incoming port: 12000
[newcamd] Connecting to 127.0.0.1:10001...
[mgcam] emm thread started
network port 12000 open: bind error 98: Address already in use
[newcamd] Login to 127.0.0.1:10001 as local failed (0ms)

Der MGCAMD config.

# EMM messages
# 00 don't show any EMM's (default)
# 01 show only valid EMM's
# 02 show valid and bad EMM's with complete data display

M: { 01 }

# ECM messages
# 00 don't show any ECM's
# 01 show only valid ECM's (default)
# 02 show valid and bad ECM's with complete data display
C: { 01 }

# AU
# 00 is ignored (default)
# 01 enable AU
# 02 AU Auto
A: { 02 }

# key update
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
U: { 01 }

# key files folder
# 00 keyfiles in /var/keys
# 01 keyfiles in /var/tmp
T: { 00 }

# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
G: { 01 }

# network retry, use summ for several options
# 00 disable (default)
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
N: { 00 }

# network ecm timeout in seconds
K: { 10 }

# newcamd dead routes connect retry, sec
Q: { 600 }

# network shares priority
# 00 newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd
# 02 newcamd, camd3, radegast
P: { 00 }

# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
O: { 00 }

# on screen display Options
# 03 default
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
S: { 03 }

# Log options
# 00 Off (default)
# 01 Network
# 02 console
# 03 both
L: { 02 } 172.16.1.1 28007

# cache ecm pids and data used to open channels,
# store pids in /tmp/ca_cache.list at exit, load at startup,
# same syntax as restore.list
# 00 Off (default)
# 01 Ecm pids cache
# 02 Ecm data cache
# 03 both caches
H: { 00 }

# reread files on zap:
# 00 No (default)
# 01 config (including priority and ignore, but not replace/cache)
# 02 config and keys
# 03 both
R: { 00 }

# debug
# 00 off (default)
# 01 on
D: { 00 }

# box type
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
B: { 01 }

Die Newcamd.config

EMU = yes
PREFER_EMU = yes
AU = yes
OSD_TIMEOUT = 0
OSD_WEB_LOGIN = root:dbox2
SHOW_ALL_CA_SYSTEMS = no
DEBUG_ECM = yes
DEBUG_EMM = no
DEBUG_CWS = no
DEBUG_CAM = no
SHOW_PAT = no
SHOW_PMT = no
SHOW_ECM = no
SHOW_CAT = no
SHOW_EMM = no
SHOW_CWS_ECM = no
SHOW_CWS_EMM = no
EMM_REPORT_WRONG_SIG = yes
DEFAULT_CW_DELAY = 500
RELOAD_CONFIG_ON_ZAP = no
RELOAD_KEYLIST_ON_ZAP = no
CA_INFO_FILE = /tmp/cainfo.txt
CWS = uds 0 local local
CWS = uds 1 local local
CWS = 127.0.0.1 10001 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv
CWS_CONNECT_TIMEOUT = 20
CWS_INCOMING_PORT = 12000
CWS_DEBUG_PORT = 12001
CWS_KEEPALIVE = no
ADMIN_PASSWORD = test 00 00 00 00 00 00 00 00 00 00 00 00 00 00

NewCS.xml

<?xml version="1.0"?>


<newCSconfig>

<readers name="Card Readers">
<device>
<name>multicam</name>
<type>dbox</type>
<node>/dev/tts/1</node>
<mhz>357</mhz> 
<parity>even</parity>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<boxkey>0000000000</boxkey>
<PTShandshake>no</PTShandshake>
<crypto-special>no</crypto-special>
<carddetect>no</carddetect>
<newcamd_port>10001</newcamd_port>
<priority>round</priority> 
<sid>
<allow>

<id></id>
</allow>
<deny>

<id></id>
</deny>
</sid>
</device>

</readers>
<radegastserver>

<enabled>no</enabled>


<port>10001</port>


<allow>
<hostname>127.0.0.1</hostname>
</allow>
</radegastserver>
<cache>
<emm>10</emm>
<ecm>10</ecm>
</cache>
<debug>
<level>normal</level>
<type>init</type>
<output>all</output>
<logfile></logfile>
<console_options></console_options>
<file_options></file_options>
<udp_host>192.168.1.10</udp_host>
<udp_port>1000</udp_port>
<udp_options></udp_options>
<tcp_port>3001</tcp_port>
<tcp_options></tcp_options>
</debug>
<newcamdserver>
<enabled>yes</enabled>
<name>bla</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<userfile></userfile>
<user>
<name>dummy</name>
<password>dummy</password>
<au>on</au>
</user>
<user>
<name>User1</name>
<password>Pass1</password>
<au>on</au>
</user>

<user>
<name>User2</name>
<password>Pass2</password>
<hostname>localhost</hostname>
<port>12345</port>
<spider>yes</spider>
</user>

</newcamdserver>

</newCSconfig>