Mgcamd am PKT SF1028 E2 NEBULA v1 Image konfigurieren
Ich have einem image von pkteam SF1028 E2 PKT NEBULA v1 geladen unt jetzt is es sort einem dreambox
Jetzt versuche ich, meine Emulator (mgcamd 1,35) konfigurieren, weil ich nur zwischen camd3 , inbuscamd, mbox, mgcamd, MPC, newcs, oscam wählen könnten
Seit oscam ist schwierig für mich ich finde mgcamd leichter. Das ist mein Log-Datei
tuxbox mgcamd v1.35 by mixvt (compiled Jan 20 2010 22:15:45)
[mg] Net:33:4:2:30s Show ecm:1, emm:1 Up:5 Au:0 Dir:0 Osd:no:80:0 Cache:0 Log:4:172.16.1.1:28007 Reread:7
[mg] Ecm cache time: 0
Box type: dbox2
Conax.Key error 2: No such file or directory
Keys readed
Conax.Key error 2: No such file or directory
newcamd keep alive: 300, incoming port: 21000
CCcamd route: host -
CCcamd route: host -
CCcamd route: host -
CCcamd route: host -
[mgcam] emm thread started
[cccamd] My nodeID d4423aa9d533d50
[cccamd] =============== Connecting to -... ===============
[cccamd] =============== Connecting to -... ===============
[cccamd] =============== Connecting to -... ===============
[cccamd] =============== Connecting to -... ===============
[cccamd] Connected to - (37ms)
[cccamd] Connected to - (42ms)
[cccamd] Connected - (43ms)
[cccamd] Connected to - (39ms)
[cccamd] Login to - accepted (82ms)
[cccamd] Server intro from -
[cccamd] Server NodeID aee73c198a65175 version 2.0.11
[cccamd] Login to - accepted (76ms)
[cccamd] Server intro from -
[cccamd] Server NodeID aee73c198a65175 version 2.0.11
[cccamd] Login to - accepted (49ms)
[cccamd] Server intro from -
[cccamd] Server NodeID - 2.0.11
[cccamd] Login to - accepted (49ms)
[cccamd] Server intro from -
[cccamd] Server NodeID aee73c198a65175 version 2.0.11
got 59 cmd 9F
Log file: /tmp/mgcamd.log
[mg] Net:33:4:2:30s Show ecm:1, emm:1 Up:5 Au:0 Dir:0 Osd:no:80:0 Cache:0 Log:4:172.16.1.1:28007 Reread:7
[mg] Ecm cache time: 0
Conax.Key error 2: No such file or directory
Keys readed
[mg0] namespace C00000 t-id 451 on-id 35
[mg0] descramble on 1, source 0
CA_SET_PID error 1: Operation not permitted
[mg0] service FB0 index 0 pmt pid 844 (1), pids: video 0x020D, audio 0x007A 0x0028
[mg0] No supported encryption system found
[mg0] stopped
[mg0] stoping camd..
got 316 cmd 9F
Log file: /tmp/mgcamd.log
[mg] Net:33:4:2:30s Show ecm:1, emm:1 Up:5 Au:0 Dir:0 Osd:no:80:0 Cache:0 Log:4:172.16.1.1:28007 Reread:7
[mg] Ecm cache time: 0
Conax.Key error 2: No such file or directory
Keys readed
[mg0] namespace C00000 t-id 451 on-id 35
[mg0] descramble on 1, source 0
CA_SET_PID error 1: Operation not permitted
[mg0] service FAB index 0 pmt pid 83F (2), pids: video 0x0205, audio 0x0058 0x0022
[mg0] ECM: CaID: 0x0622 -> CaPID: 0x0567 ProvID: 000000
[mg0] ECM: CaID: 0x1817 -> CaPID: 0x070B ProvID: 000000
[mg0] ECM: CaID: 0x1818 -> CaPID: 0x071F ProvID: 000000
[mg0] ECM: CaID: 0x1819 -> CaPID: 0x0733 ProvID: 000000
[mg0] ECM: CaID: 0x0100 -> CaPID: 0x0643 ProvID: 00006A
[mg0] ECM: CaID: 0x0100 -> CaPID: 0x070B ProvID: 00006A
[mg0] ECM: CaID: 0x0100 -> CaPID: 0x071F ProvID: 00006C
[mg0] ECM: CaID: 0x0100 -> CaPID: 0x0733 ProvID: 00006D
[mg0] ECM: CaID: 0x0500 -> CaPID: 0x057B ProvID: 042500
[mg0] ECM: CaID: 0x0500 -> CaPID: 0x058F ProvID: 042500
[mg0] No irdeto key(s) found for id 0 keynr 00
[mg0] network can't decode
[mg0] No nagra2 key(s) found for id 7 keynr 01
[mg0] network can't decode
[mg0] pid 0x070B failed to decode.
[mg0] No nagra2 key(s) found for id 7 keynr 01
[mg0] network can't decode
[mg0] pid 0x071F failed to decode.
[mg0] No nagra2 key(s) found for id 7 keynr 01
[mg0] network can't decode
[mg0] pid 0x0733 failed to decode.
[mg0] No seca key(s) found for id 6A keynr 0c
[mg0] network can't decode
[mg0] pid 0x0643 failed to decode.
[mg0] No seca key(s) found for id 6A keynr 0c
[mg0] network can't decode
[mg0] pid 0x070B failed to decode.
[mg0] No seca key(s) found for id 6C keynr 0c
[mg0] network can't decode
[mg0] pid 0x071F failed to decode.
[mg0] No seca key(s) found for id 6D keynr 0c
[mg0] network can't decode
[mg0] pid 0x0733 failed to decode.
[mg0] No viaccess key(s) found for id 42500 keynr 0b
[mg0] network can't decode
[mg0] pid 0x057B failed to decode.
[mg0] No viaccess key(s) found for id 42500 keynr 0b
[mg0] network can't decode
[mg0] pid 0x058F failed to decode.
Bitte sagen Sie mir, wie ich ändern damit es funktioniert.
(sorry für mein schlechtes Deutsch)
AW: Mgcamd am PKT SF1028 E2 NEBULA v1 Image konfigurieren
Hallo,
ein paar mehr Angaben wäre nicht schlecht.
So wie ich es sehe willst du von einen Octagon Reciever zu einer Dreambox sharen, richtig ?
Welche IP haben die Boxen.
Wie sind die Einträge in der mg_cfg und peer.cfg
Welche Karten willst du sharen.
Willst du HomeCS oder InternetCS betreiben.
AW: Mgcamd am PKT SF1028 E2 NEBULA v1 Image konfigurieren
Nein ich habe ein cline und jetzt probiere ich mit mgcamd verbindung zu machen mit meinem (octagon receiver dreht enigma 2 image)
AW: Mgcamd am PKT SF1028 E2 NEBULA v1 Image konfigurieren
Hi, poste mal deine mg_cfg und die ignore.list in var / keys.
AW: Mgcamd am PKT SF1028 E2 NEBULA v1 Image konfigurieren
Ich habe die dateien hochgeladen
mijnbestand.nl/Bestand-PLK8J4F3HHBY.rar
AW: Mgcamd am PKT SF1028 E2 NEBULA v1 Image konfigurieren
Hi, nimm mal die mg_cfg. Und lösch mal die prio.list
Code:
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 00 }
# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 00 }
# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 00 }
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 32 }
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30
# network ecm timeout in seconds
K: { 05 }
# newcamd dead routes connect retry, sec
Q: { 600 }
# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 02 }
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password
# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 08 } + 192.168.178.5 80
# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 00 } 192.168.178.5 28007 /tmp/mgcamd.log
# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }
# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 04 }
# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 00 }
# map all 180x nagra caids to 1801
# default is 01
F: { 00 }
