Druckbare Version
Hallo,
hab ja mein Oscam mit mgcamd nun erfolgreich mit s*y und hd+ am laufen.
Wollte jetzt mit paar kolegen eventuel ein wenig was tauschen :grinsend0229:
Bevor ich das aber richtig betreiben möchte, wollte ich fragen wie und wo ich was einstellen muss damit meine "gesponsorten sender" nicht ungefragt an andere weitergegeben werd?
Wie gesagt, server ist dbox2 mit oscam und mgcamd 1.35!
und schon hast du das weitersharing unterbunden.
Indem du auf den Clients MgCamd nimmst.
und wenn auf den anderen boxen z.B. cccam läuft?
dann brauchst du auf deinem server ja auch cccam.
stellt aber auch kein Problem da, musst nur in der F-line zum user ein
1 0 0 { 0:0:1 } eintragen.
Ist ueberigends eine gute Kombi,
Oscam liest die Karte und Cccam macht das Usermanagement.
Mache ich auch, da Oscam kein so gute Userverwaltung hat.
leider gibt es aber keine cccam für die käthe also unintressant :frown:
bei der Kathie ist CCcam nur als Client moeglich.
Ausserdem schreibst du in deinem ersten Beitrag das du dbox2 als Server hast.
Da machste Oscam und cccam drauf.
Und deine anderen bindest du per Cccam an.
danke erstmal für deine mühe!
Hab jetzt die Incubuscamd auf der käthe am laufen und geht einwandfrei bis jetzt!
ich muss mal schauen ob ich nun alles umstelle.
Also cccamd mit oscam auf dbox und incubuscamd auf die beiden Kathrein 910!?
jawohl, das kannst du so machen.
EDIT: Hab hier mal meine configs für die incubuscamd, wollte damit ne share line von nem kolegen schauen + den cardreader von mir für HD+
Die line für fürs inet sharing läuft jedoch komm ich nicht auf mein cardreader für HD+ :(Code:################################################## ############################
# incubusCamd configuration file #
# All configuration options in this file observe the same format: #
# <configuration_name>=<configuration_value> #
# #
# Each section are [<section_name>:<option_1>:<option_x>] like. #
# #
# No matter about white spaces on any place or UNIX/DOS style files #
################################################## ############################
########################### general configuration ############################
[General]
# Enable (1) or disable (0) background execution
# 0 - Off
# 1 - On
#
background_execution=0
# This sets the level of console output for debugging:
# 0 - No debug messages, 1 - First level debug messages, 2 - Second level debug messages,
# 3 - Print all debug messages
#
debug_level=0
# This option enables (1) or disables (0) the writing of debug information to the
# console.
#
log_to_console=0
# This option enables (1) or disables (0) the writing of console output to a log file
#
log_to_file=0
# When log_to_file is set to 1, this is the path and filename to write console
# ouput to.
#
logfile_name=/var/bin/incubusCamd.log
# This is the path and filename to read SoftCam.Key file
# by default it will be searched in the /var/keys directory
#
softcamfile_name=/var/keys/SoftCam.Key
# This is the path and filename to read prio file
# by default it will be searched in the /var/bin directory, or in /etc, or in /var/keys
#
priofile_name=/var/keys/incubusCamd.prio
# Used to activate on-screen messages. Username and password required if
# HTTP authentication is enabled on enigma.
# 0 - Off
# 1 - On
#
on_screen_messages_show=1
on_screen_messages_username=root
on_screen_messages_password=
on_screen_messages_key_update=0
on_screen_messages_wait_for_key_update=0
on_screen_messages_ecm=0
on_screen_messages_emm=0
# When activated, incubusCamd will listen on the specified port for connections. All
# log activity will be broadcast in real-time to connected clients.
#
console_logs_broadcast=0
console_logs_broadcast_port=666
# Enable/disable incubusCamd web interface (default port is 668).
# 0 - Disable
# 1 - Enable
webif=0
webif_port=668
########################### provider configuration ###########################
#
# All parameters are in hexadecimal notation.
# Each section is defined by the provider id value.
# If you don't know the provider id value then use the provider id "000000" and ca id "0000".
# On provider 000000 caid 0000 goes all provider wich are not declared. If the provider
# is declared then the cam will use the provider founded.
#
[Prov:000000:CaID:0000]
# ----------------------------------------------------------------------------
# this provider is a stand-in for all cards and all caid not declared previously
#
# You can select wich type of priority to assign on each caid/prov combination
# priority name available are: card,emu,cs
# card: internal card reader
# emu: internal emulator
# cs: card share protocols
# each type must be separated by a comma
#
# you can also set to use only cs and nothing more, to do it insert on each comma "cs"
# example: check_priority=cs,cs,cs # only cs in this case
# example: check_priority=card,emu,emu # no cs in this case
# obviously this is not suggested but if you prefer to disable an option you should do it in this way
# you can also declare only one type: check_priority=cs
# or two types: check_priority=cs,emu
# and so on
check_priority=cs,emu,card
# You can select wich protocol will be used first for the current caid/prov combination
# protocol name available are: newcamd,cccam,gbox,radegast,camd33,camd35,aroureos
# each protocol must be separated by a comma
#
# you can also declare only one type: cs_protocol_order=cccam
# or two types: cs_protocol_order=cccam,newcamd
# and so on
cs_protocol_order=cccam,newcamd,gbox,camd35,camd33 ,radegast,aroureos
# Enable (1) or disable (0) emm process when a cs protocol is used
# 0 - Off
# 1 - On
#
process_emms_on_cs_mode=0
# Enable (1) or disable (0) emm g type process
# 0 - Off
# 1 - On
#
process_emm_g=0
# Enable (1) or disable (0) emm s type process
# 0 - Off
# 1 - On
#
process_emm_s=0
# Enable (1) or disable (0) emm u type process
# 0 - Off
# 1 - On
#
process_emm_u=0
#[Prov:000501:CaID:1833]
#check_priority=cs,emu,card
#cs_protocol_order=cccam,newcamd,gbox,camd35,camd3 3,radegast,aroureos
#process_emms_on_cs_mode=0
#process_emm_g=0
#process_emm_s=0
#process_emm_u=0
[Prov:000000:CaID:0000]
check_priority=cs,cs,cs
cs_protocol_order=cccam,newcamd,gbox,camd35,camd33 ,radegast,aroureos
process_emms_on_cs_mode=0
process_emm_g=0
process_emm_s=0
process_emm_u=0
########################### servers configuration ############################
[Servers]
# This is the section for the multi-server configuration.
#
# URL of card-server to use, formats are as follows:
#
# newcamd://<username_31>:<password_31>@<hostname>:<port>:<cai d_4>:<prov_id_6>/<des_key_14>/[EMM]
# aroureos://@<hostname>:<port>:<caid_4>:<prov_id_6>/[EMM]
# radegast://@<hostname>:<port>:<caid_4>:<prov_id_6>/[EMM]
# camd33://<username_10>:<password_10>@<hostname>:<port>:<cai d_4>:<prov_id_6>/[aes_key_16]/[EMM]
# camd35://<username_32>:<password_32>@<hostname>:<port>:<cai d_4>:<prov_id_6>/[EMM]
# gbox://<localhost>:<localport>:<password_8>@<peer_address >:<peer_port>:<peer_pass_8>/[EMM]
#
# cccam://<username_20>:<password_32>@<hostname>:<port>/<receive_emu_shared>/[EMM]
# where <receive_emu_shared> should assume value "yes" (without quotes, if you like to receive emus data shared by the server) or "no" (this is assumed by default)
#
#
# NOTE: The "EMM" suffix is optional and tells the card-server client whether
# to send EMM's to the card-server or not. Enabling or disabling this only
# has effect if the card-server is configured to accept emms from this client.
#
# NOTE 2: The "card_server_url" is not the same as previously declared in the prov/caid section
# use how many server as you like
#
# i.e:
#
card_server_url=cccam://user:pass@192.168.2.104:34000
#card_server_url=gbox://yourname.dyndns.org:6666assword@hisname.dyndns.o rg:6666eer_pass
#card_server_url=cccam://usernameassword@hostnameort
#card_server_url=gbox://192.168.1.24:5555assword@192.168.1.32:4444eer_ pass
#card_server_url=newcamd://user:pass@192.168.2.104:34000:1702/0102030405060708091011121314
#card_server_url=radegast://@192.168.0.100:10550:0100:000065
#card_server_url=aroureos://@yourhostname.dyndns.org:10666:0500:007C00
#card_server_url=camd35://usernameassword@192.168.0.50:14150:0603:000000
#card_server_url=camd33://usernameassword@192.168.0.50:10550:0603:000000 # cam33 without AES encryption
#card_server_url=camd33://usernameassword@192.168.0.50:10500:0604:000000/01020304050607080910111213141516 # cam33 with AES encryption
card_server_url=cccam://user:pass.dyndns.org:12000
########################### CaIDs tunneling configuration ############################
[CaIDTunnel]
#
# All values are in hex notation
# In this file you can configure what CAIDs/PIDs incubusCamd should tunnel to another CAID
#
# situation 1: this caid, all idents, on all channels will use the tunnel_caid
# caid:tunnel_caid
#
# situation 2: this caid/ident pair will use the tunnel_caid
# caid:tunnel_caid:ident
#
# situation 3: this caid/ident pair, on channel 'sid' will use the tunnel_caid
# caid:tunnel_caid:ident:sid
#
# i.e:
#
1833:1702:000000:0080 #History HD
1833:1702:000000:0081 #Sky Sport HD
1833:1702:000000:0082 #Discovery HD
1833:1702:000000:0083 #Sky Cinema HD
1833:1702:000000:0084 #EuroSport HD
1833:1702:000000:007E #Disney Cinemagic HD
1833:1702:000000:007F #National Geography HD
weder mit der newcamd line noch mit der cccam line???