Flashfehler

Habe ein Problem und zwar habe ich eine Kathrein vom Kollege bekommen,weil sie nach den flashen nur noch ufs910 anzeigte. Habe es mit kcc experten versucht und da zeigte er mir schon immer ip ping fehler an.Dann habe ich über Hypert. mit emergency.ub es glaube ich wieder hinbekommen.Dann notfall1.03 dann notfall1.06 dann 1.06 mit 2 bootl. klappt soweit alles.
Aber ich bekomme über der Netzwerkarte keine verbindung mehr hin woran könnte es liegen.



pll0 freq 531
pll1 freq 399
Net: VFD_Driver Init
VFD_Controller Type : NEW Kathrein VFD
board_version = 0
Button_value = 6
Boot From Emergency Root File System Upate Appliction
Hit any key to stop autoboot: 0
## Booting image at a0040000 ...
Bad Magic Number
STB7100-REF>

Board: STb7100-mboard


U-Boot 1.1.2 (STLINUX_2_0p1) (Feb 23 2008 - 17:07:31)

DRAM: 32 MB
write time out = 1, clock = 40
write time out = 1, clock = 40
Flash: 16 MB
In: serial
Out: serial
Err: serial
pll0 freq 531
pll1 freq 399
Net: VFD_Driver Init
VFD_Controller Type : NEW Kathrein VFD
board_version = 0
Button_value = 6
Boot From Emergency Root File System Upate Appliction
Hit any key to stop autoboot: 4


Board: STb7100-mboard


U-Boot 1.1.2 (STLINUX_2_0p1) (Feb 23 2008 - 17:07:31)

DRAM: 32 MB
write time out = 1, clock = 40
write time out = 1, clock = 40
Flash: 16 MB
In: serial
Out: serial
Err: serial
pll0 freq 531
pll1 freq 399
Net: VFD_Driver Init
VFD_Controller Type : NEW Kathrein VFD
board_version = 0
Button_value = 7
Hit any key to stop autoboot: 0
STB7100-REF> print
boot_param_version=11

board=stb7100ref_27
bootdelay=10
°}W)ÜgÑ{ÜgÑ{Â
V)˜¶V)
autoload=n
bootargs=console=ttyAS0,115200 root=/dev/mtdblock3 mem=36m bigphysarea=1280
oprocessor_mem=2m@0x04000000,2m@0x04200000
bootcmd=bootm a0040000
stdin=serial
stdout=serial
stderr=serial

Environment size: 271/65532 bytes
STB7100-REF>


Board: STb7100-mboard


U-Boot 1.1.2 (STLINUX_2_0p1) (Feb 23 2008 - 17:07:31)

DRAM: 32 MB
write time out = 1, clock = 40
write time out = 1, clock = 40
Flash: 16 MB
In: serial
Out: serial
Err: serial
pll0 freq 531
pll1 freq 399
Net: VFD_Driver Init
VFD_Controller Type : NEW Kathrein VFD
board_version = 0
Button_value = 7
Hit any key to stop autoboot: 0
STB7100-REF> printenv
boot_param_version=11

board=stb7100ref_27
bootdelay=10
°}W)ÜgÑ{ÜgÑ{Â
V)˜¶V)
autoload=n
bootargs=console=ttyAS0,115200 root=/dev/mtdblock3 mem=36m bigphysarea=1280
oprocessor_mem=2m@0x04000000,2m@0x04200000
bootcmd=bootm a0040000
stdin=serial
stdout=serial
stderr=serial

Environment size: 271/65532 bytes
STB7100-REF> setenv bootcmd bootm a0040000
STB7100-REF> setenv bootargs "console=ttyAS0,115200 root=/dev/mtdblock3 mem=32m
bigphysarea=1024 coprocessor_mem=2m@0x04000000,2m@0x04200000"
STB7100-REF> "saveenv"
Saving Environment to Flash...
env buffer crc = 9f9cfd37, data = 85e0000c
..

Un-Protected 2 sectors
Erasing Flash...
.. done
Erased 2 sectors
Writing to Flash... .done
..

Protected 2 sectors
STB7100-REF>

Board: STb7100-mboard


U-Boot 1.1.2 (STLINUX_2_0p1) (Feb 23 2008 - 17:07:31)

DRAM: 32 MB
write time out = 1, clock = 40
write time out = 1, clock = 40
Flash: 16 MB
In: serial
Out: serial
Err: serial
pll0 freq 531
pll1 freq 399
Net: VFD_Driver Init
VFD_Controller Type : NEW Kathrein VFD
board_version = 0
Button_value = 6
Boot From Emergency Root File System Upate Appliction
Hit any key to stop autoboot: 0
## Booting image at a0040000 ...
Bad Magic Number
STB7100-REF>


Board: STb7100-mboard


U-Boot 1.1.2 (STLINUX_2_0p1) (Feb 23 2008 - 17:07:31)

DRAM: 32 MB
write time out = 1, clock = 40
write time out = 1, clock = 40
Flash: 16 MB
In: serial
Out: serial
Err: serial
pll0 freq 531
pll1 freq 399
Net: VFD_Driver Init
VFD_Controller Type : NEW Kathrein VFD
board_version = 0
Button_value = 7
Hit any key to stop autoboot: 0
## Booting image at a0040000 ...
Image Name: Linux-2.6.17.14_stm22_0037
Image Type: SuperH Linux Kernel Image (gzip compressed)
Data Size: 1697141 Bytes = 1.6 MB
Load Address: 84401000
Entry Point: 84402000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK

Starting kernel console=ttyAS0,115200 root=/dev/mtdblock3 mem=36m bigphysarea=12
80 coprocessor_mem=2m@0x04000000,2m@0x04200000 - 0x00000000 - 0 ...

Linux version 2.6.17.14_stm22_0037 (root@develgod) (gcc-Version 4.1.1
ectronics/Linux Base 4.1.1-23)) #127 PREEMPT Tue Jul 1 19:41:06 CEST 2008
STMicroelectronics STb7100 Reference board initialisation
STb7100 version 3.x
Built 1 zonelists
Kernel command line: console=ttyAS0,115200 root=/dev/mtdblock3 mem=36m bigphysar
ea=1280 coprocessor_mem=2m@0x04000000,2m@0x04200000
st-coprocessor: Failed to reserve memory at 0x04000000
st-coprocessor: Failed to reserve memory at 0x04200000
PID hash table entries: 256 (order: 8, 1024 bytes)
Using tmu for system timer
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 27952k/36864k available (2821k kernel code, 8892k reserved, 360k data, 8
8k init)
PVR=04061100 CVR=30480000 PRR=00009100
I-cache : n_ways=2 n_sets=256 way_incr=8192
I-cache : entry_mask=0x00001fe0 alias_mask=0x00001000 n_aliases=2
D-cache : n_ways=2 n_sets=512 way_incr=16384
D-cache : entry_mask=0x00003fe0 alias_mask=0x00003000 n_aliases=4
Mount-cache hash table entries: 512
CPU: STb
NET: Registered protocol family 16
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
NET: Registered protocol family 2
IP route cache hash table entries: 512 (order: -1, 2048 bytes)
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 2048 bind 1024)
TCP reno registered
bigphysarea: Allocated 1280 pages at 0x847a3000.
JFFS2 version 2.2. (NAND) (C) 2001-2003
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Device probe found data for platform device lirc
lirc_dev: IR Remote Control driver registered, at major 61
lirc_dev: lirc_register_plugin: sample_rate: 0
lirc_dev: lirc_register_plugin: plugin lirc_stm owner 00000000
STM LIRC plugin has IRQ 125
Lirc STM: Using IRB mode
STMicroelectronics LIRC driver configured
STPIO layer initialised
VFD_Controller Type : NEW Kathrein VFD
STMicroelectronics ASC driver initialized
ttyAS0 at MMIO 0xb8032000 (irq = 121) is a asc
ttyAS1 at MMIO 0xb8033000 (irq = 120) is a asc
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
s_env_mac[0] =

s_env_mac[1] = s_env_mac[2] = s_env_mac[3] = s_env_mac[4] = ÿ
s_env_mac[5] = ÿ
s_env_mac[6] = ÿ
s_env_mac[7] = ÿ
s_env_mac[8] = ÿ
s_env_mac[9] = ÿ
s_env_mac[10] = ÿ
s_env_mac[11] = ÿ
s_env_mac[12] = 
s_env_mac[13] = s_env_mac[14] = s_env_mac[15] = s_env_mac[
get ether addr = 0, 0, 0, 0, 0, 0
mac hi address = 0, lowaddress = 0
nwhw_config: device not found
ata1: SATA max UDMA/133 cmd 0xB9209000 ctl 0xB9209820 bmdma 0x0 irq 170
ata1: SATA link down (SStatus 0)
scsi0 : sata_stm
Generic ST boards onboard flash device: 0x01000000 (16.0Mb) at 0x00000000
Onboard_Flash: Found 1 x16 devices at 0x0 in 16-bit bank
Onboard_Flash: Found 1 x16 devices at 0x800000 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
Onboard_Flash: CFI does not contain boot bank location. Ass
number of CFI chips: 2
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Creating 10 MTD partitions on "Onboard_Flash":
0x00000000-0x00020000 : "1st stage BL: 0xA000.0000-0xA001.FFFF"
0x00040000-0x00200000 : "Kernel: 0xA004.0000-0xA01F.FFFF"
0x00200000-0x002a0000 : "Config FS: 0xA020.0000-0xA029.FFFF"
0x002a0000-0x004e0000 : "Root FS: 0xA02A.0000-0xA04D.FFFF"
0x004e0000-0x00ae0000 : "Application FS: 0xA04E.0000-0xA0AD.FFFF"
0x00ae0000-0x00c00000 : "Emergency FS:
0x00c00000-0x00fc0000 : "Data FS: 0xA0C0.0000-0xA0FB.FFFF"
0x00020000-0x00040000 : "BL1 Config: 0xA002.0000-0xA003.FFFF"
0x00fc0000-0x00fd0000 : "BL2 Config: 0xA0FC.0000-0xA0FC.FFFF"
0x00fd0000-0x01000000 : "2nd stage BL: 0xA0FD.0000-0xA0FF.FFFF"
ST40_start_host_control
ST40_start_host_control proceeding
ST40-ehci ST40-ehci.2: ST EHCI Host Controller
ST40-ehci ST40-ehci.2: new USB bus registered, assigned bus number 1
ST40-ehci ST40-ehci.2: irq 169, io mem 0xb91ffe00
ST40-ehci ST40-ehci.2: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: Product: ST EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.17.14_stm22_0037 ehci_hcd
usb usb1: SerialNumber: STB7100_EHCI
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver libusual
pegasus: v0.6.13 (2005/11/13), Pegasus/Pegas
usb 1-1: new high speed USB device using ST40-ehci and address 2
usb 1-1: Product: USB2.0 Hub
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usbcore: registered new driver pegasus
usbcore: registered new driver asix
usbcore: registered new driver cdc_ether
usbcore: registered new driver net1080
usbcore: registered new driver zaurus
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
stssc layer initialized
STMicroelectronics - Coprocessors st
st231-0 Coprocessor -------------------------------------------
flags 0001 RAM start at 0xa4000000 size 0x00200000
cop. addr 0x04000000
Channels : Not defined
IRQ : not used
---------------------------------------------------------------
st231-1 Coprocessor -------------------------------------------
flags 0001 RAM start at 0xa4200000 size 0x00200000
cop. addr 0x04200000
Channels : Not defined
IRQ : not used
---------------------------------------------------------------
TCP bic registered
TCP highspeed registered
NET: Registered protocol family 1
NET: Registered protocol family 17
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 88k freed
/etc/init.d/rcS running...
Remounting root file system in read-write mode...mount: Can't find / in /etc/fst
ab
: Success
mount: Mounting / on (null) failed: Success
[FAILED]
/etc/rcS.d/S200mountfs: /etc/rcS.d/S200mountfs: 91: cannot create /etc/mtab: Rea
d-only file system
mount: Can't find / in /etc/fstab
: Success
mount: Mounting / on (null) failed: Success
Mounting other file systems...[ OK ]
Bringing up the loopback interface...[ OK ]
Setting up hostname...(none)
[ OK ]


BusyBox v1.1.0 (2006.03.02-09:48+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

config/start.sh does not exist.... running /app/start.sh
PARAM : boot_param_version=11

PARAM : board=stb7100ref_27
PARAM : bootcmd=bootm a0040000
PARAM : bootdelay=10
PARAM : °}W)Ü7Ï
V)˜¶V)d


U-
PARAM : bootargs=console=ttyAS0,115200 root=/dev/mtdblock3 mem=36m bigphysarea=1

DRAM: 32 MB
write time out = 1, clock = 4
280 coprocessor_mem=2m@0x04000000,2m@0x04200000 = 1, clock = 40
PARAM : stdin=serial
In: serial
PARAM : stdout=serialial
Err:
PARAM : stderr=serial
pll0 freq 531
PARAM : autoload=n9
Net
BOOT PARAM VERSION = 11
VFD_C
mknod: /dev/vfd: File exists VFD
vfd_driver_new: module license 'Marusys' taints kernel._value = 7
Hit any key to stop autoboot
tmp_pin = 8474d548

VFD_Driver Init at a0040000 ..
VFD_Controller Type : NEW Kathrein VFDagic Number
STB7100-RE
VFD_Driver Init
Board: STb7100
VFD PIO Already Opened


U-Boot 1.1.2 (
VFD PIO Already Opened2008 - 17:07:31)
VFD PIO Already Opened
.
Reading...
Erased
okec
Preproc Clock: Cut 3.0 detected -> setting Preproc clock.
..

Protected 2 sectors
stpio_core_init_module(): Initializing STPIO Module


U-Boot 1.1.2 (STLINUX_2_0p1)
Load module fdma [254] by insmod (pid 116)

DRAM:
STFDMA_ClbckMgr: task created ... Priority=99= 40
write ti
Load module stpti4_core by insmod (pid 118)
Flash: 16 MB
In: s
Load module stclkrv_core by insmod (pid 119)
Err: serial
pll0 freq 531

hdmi_i2c_init : Initializing I2CHDMI kernel Moduleer Init
VFD_Controller Type :
the adapter name is i2c-ssc-0 number 0
board_version = 0
the adapter name is i2c-ssc-1

pll0 freq 531
LX loaded:ll1 freq 3
Base: 0xa4200000: VFD_Driver Ini
Last: 0xa4347284
VFD_Controlle
Size:1340036threin VFD
mod_lxload_exit: Exiting LXLOAD kernel Moduleon = 0
Button_value = 6
The I/O memory region 0x04200000 is released successfullyliction
Unload module lxload by rmmod (pid 141)
## Booting

mod_lxload_init: Initializing LXLOAD kernel Module, StartAddress: 0x04000000
STB7100-REF>

Board: STb7100-mboard
Load module lxload[253] by insmod (pid 142)08 - 17:07:31)
LXLOADER virtual io kernel address of phys 0xa400
write time out = 1, clo
board_version = 0
LX loaded:alue = 6
Base: 0xa4000000 From Emergency Ro
Last: 0xa403403ce Appliction
Size:213052
mod_lxload_exit: Exiting LXLOAD kernel Moduleoot: 0
## Bo
The I/O memory region 0x04000000 is released successfully
Bad Magic Number
STB7100-REF>
Unload module lxload by rmmod (pid 152)


U-Boot 1.1.2 (STLINUX_2_0p1) (
EMBXSHM-PortClosed: with RT priority done with syscall. PID=159

DRAM: 32 MB
write time out = 1, clo
EMBX EMBXSHM-PortClosed: task created ...ite time out = 1, clock = 40
stblit_ioctl_init_module: Initializing STBLIT IOCTL Module NEW Kathrein VFD
bo
Load module stblit_ioctl[248] by insmod (pid 196)
Hit any key to stop autoboot: 0
mknod -m 0660 /dev/stapi/stblit_ioctl c 248 0ge at a0040000 ...
stlayer_ioctl_init_module: Initializing STLAYER kernel Module

Board: STb7100-mboard


U-Boot 1.1.2
Load module stlayer_ioctl[247] by insmod (pid 204)

DRAM:
mknod -m 0660 /dev/stapi/stlayer_ioctl c 247 0 40
write time
Load module stpti4_ioctl [246] by insmod (pid 212)
Flash: 16 MB
In: serial
mknod -m 0660 /dev/stapi/stpti4_ioctl c 246 0
pll0 freq 531
pll1 fr
Load module stclkrv_ioctl [245] by insmod (pid 220)
VFD_Controller Type : NEW Ka

DR
mknod -m 0660 /dev/stapi/stvmix_ioctl c 241 0ock = 40
writ
stvbi_ioctl_init_module: Initializing STVBI kernel ModuleFlash: 16 MB
In: serial
Out:
Load module stvbi_ioctl[240] by insmod (pid 260)pll0 freq 531
pll1 freq 399
mknod -m 0660 /dev/stapi/stvbi_ioctl c 240 0
VFD_Controller Type : NEW Kathrein VFD
Load module stmerge_ioctl [239] by insmod (pid 268) = 0
Button_value = 7
mknod -m 0660 /dev/stapi/stmerge_ioctl c 239 0
STB7100-REF> setenv boot
Load module staudlx_ioctl[238] by insmod (pid 276)=36m
mknod -m 0660 /dev/stapi/staudlx_ioctl c 238 0280
> oprocessor_mem=2m@0x0400

LMI_SYS SCR = 00000000
stderr=serial
LMI_SYS STR = 35b06455le=ttyAS0,115200 root=
LMI_SYS COC = 00000000bigphysarea=1280
LMI_SYS SDRA0 = 08001900
LMI_SYS SDRA1 = 08001900cessor_mem=2m@0x04000000
LMI_SYS CIC = 00000249
LMI_SYS SDMR0 = 00000000 a0040000
LMI_SYS SDMR1 = 000000001.64
LMI_VID MIM0 = 057c025f
LMI_VID MIM1 = 00000005
LMI_VID SCR = 00000000
LMI_VID STR = 35b06455
LMI_VID COC = 00000000
LMI_VID SDRA0 = 14001900
LMI_VID SDRA1 = 14001900
LMI_VID CIC = 00000249
LMI_VID SDMR0 = 00000000
LMI_VID SDMR1 = 00000000
UFS910 Button Device Driver(by Marusys Co.)

TestModMgr::CheckTestMode CmdLine = console=ttyAS0,115200 root=/dev/mtdblock3 me
m=36m bigphysarea=1280 coprocessor_mem=2m@0x04000000,2m@0x04200000

CMDLINE = console=ttyAS0,115200 root=/dev/mtdblock3 mem=36m bigphysarea=1280 cop
rocessor_mem=2m@0x04000000,2m@0x04200000

CMDLINE = console=ttyAS0,115200 root=/dev/mtdblock3 mem=36m bigphysarea=1280 cop
rocessor_mem=2m@0x04000000,2m@0x04200000

cannot fine test mode
TestModeMgr::CheckMode : TestMode Disabled

Hast Du der Kathi eine zum PC/Router passende IP gegeben?

Ja alles im selben ip Bereich.

ist das ein aktueller Log und deine Kathi startet noch ?

Gleich im ersten Block erscheint "Bad Magic Number", das ist nicht normal bzw. da ist was verbogen.

Ja das ist der Log im aktuellen Zustand mit 1.06 mit 2 Bootl.

Upsss, wundert mich ein wenig. Hmmm, da bin ich überfragt. Flashe doch mal das AAF2.0e, dort kannst du ja auch dein Netzwerk einrichten und wie gewohnt per Crossover oder Router auf die Kathi zu greifen.
Wenn es dann nicht geht, würde ich die Kiste noch mal neu aufsetzen.
Einfacher gehts mit dem USFConfigtool, das macht alles automatisch.

Hier findest du das Tool, Post Nr. 1 ganz unten:
http://www.spinnes-board.de/vb/showthread.php?t=118498

Aus der Vergangenheit kenne ich es nur so, das man nach dem 1.03 die 1.04, 1.05 usw. nacheinander flasht.
Mag sein, das diese Schritte überflüssig sind, da bin ich schon zu lange draußen, aber ich weiß das dies immer zu 100% funktioniert hat.
Seit kurzem habe ich wieder eine Kathi und gleich das SVN V2 geflasht und mit den O-Images kenne ich mich gar nicht mehr mit aus.

hatte ich schon mehrmals. mac addresse aus der box ablesen und dann unter punkt 4 "wenn die kathi nicht mehr startet" deine mac addr.einsetzen und den rest so übernehmen . dann gleich 1.6 auf stick und normal flashen.
so hat es bei mir funktioniert

Das mit der Mac ist einleuchtend, aber nur wenn sich zwei Kathis im Netz befinden und die gleiche Mac haben bzw. auch beide schon mal mit dem Notfall-Image geflasht wurden.

ja dirk1 du hast recht,aber seine ist 0.0.0.0 damit wird er nie eine verbindung bekommen es geht nur das HT. habe selbst alle programme probiert

ich habe es nochmal auf eine andere Methode ausgeführt.
HyperT.
Mit der UFR Datei senden und Image auf den Stick.
so sieht der Log aus.
Netzwerk mit CrossK. klappt wieder.



U-Boot 1.1.2 (STLINUX_2_0p1) (Feb 23 2008 - 17:07:31)

DRAM: 32 MB
write time out = 1, clock = 40
write time out = 1, clock = 40
Flash: 16 MB
In: serial
Out: serial
Err: serial
pll0 freq 531
pll1 freq 399
Net: VFD_Driver Init
VFD_Controller Type : NEW Kathrein VFD
board_version = 0
Button_value = 7
Hit any key to stop autoboot: 0
## Booting image
Image Name: Linux 2.6d/S200
s_en
Image Type: SH-4 Linux Kernel Image (gzip compressed)
s_env_mac[1] = 0ugin lirc_stm ow
Data Size: 1714625 Bytes = 1.6 MB
s_env_mac[3] = 5
s_env_
Load Address: 84401000
Entry Point: 84402000s a asc]
Verifying Checksum ... OK
s_env_mac[7] =
Uncompressing Kernel Image ... OK
s_env_mac[8] = :

Starting kernel console=ttyAS0,115200 root=/dev/mtdblock3 mem=41m bigphysarea=26mac[10] = f is a asc
s_env_mac[11] = :
00 coprocessor_mem=2m@0x04000000,2m@0x04200000 - 0x00000000 - 0 ...env_mac[13] = 2AM disks of 4096K


Linux version 2.6.17.14_stm22_0037 (kdhong@linux.localdomain) (gcc version 4.1.1 Version = 1.21oard=stb7100ref_27
S
(STMicroelectronics/Linux Base 4.1.1-23)

st-coprocessor: Failed to reserve memory at 0x04200000
Board: STb71
numb
PID hash table entries: 256 (order: 8, 1024 bytes)
SMSC: irq = 2
Using tmu for system timer
SMSC: int_dea
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Load m

SMSC:
Inode-cache hash table entries: 40
SMSC: --> Platform_InitializeMB
Mount-cache hash table entries: 512
SMSC: Lan Base at 0xA2000000ice
CPU: STb710x
NET: Registered protocol family 16XSHM-PortClosed: task created
SCSI subsystem initialized
usbcore: registered new driver usbfs

nwhw_config: devic
usbcore: registered
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)0000000
TCP: Hash tables configured (established 2048 bind 1024)
Onboard_Flash: Found 1 x16 de
TCP reno registeredit bank
bigphysarea: Allocated 2600 pages at 0x847b9000.
mice: PS/2 mouse device common for all
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.16 devices at 0x800000 in 16-bit bankes driver
Initializing Cryptographic API
io scheduler noop registered04e0000-0x00ae0000 : "APP_Mo
io scheduler anticipatory registered (default)
lirc_dev: lirc_register_plugin: plugin lirc_stm owner 00000000
ab
: Success
LMI_VID
mount: Mounting /
STM LIRC plugin has IRQ 125_start_host_controlID SCR =
Lirc STM: Using IRB mode
S
STMicroelectronics LIRC driver configured
LM
[FAILED]
STPIO layer initialisedci.2: ST EHCI Host Cont
VFD_Controller Type : NEW Kathrein VFDnot create /e
STMicroelectronics ASC driver initialized
ST40-ehci ST40-
ttyAS0 at MMIO 0xb8032000 (irq = 121)
s_env_mac[3] = 5alizing USB Mass
s_env_mac[4] = 0.Mgr::CheckMode
s_env_mac[5] = :
s_env_mac[6] = f
SC
usbcore:
s_env_mac[7] = driver usb-storag
s_env_mac[8] = :
s_env_mac[9] = f

s_env_mac[10] = fupport registered
s_env_mac[11] = :
s_env_mac[12] = 1



usbco
s_env_mac[13] = 2 driver libusualv
s_env_mac[14] = :
s_env_mac[15] = 3
peg
s_env_mac[16] = 45/11/13), Pegasus
get ether addr = 0, 50, fd, ff, 12, 34


Board: STb71
mac hi address = 3412, lowaddress = fffd5000usbcore: registered new driver zaurus
SMSC: --> init_module()

Channels : Not defined
SMSC: debug_mode = 0x00000007 : not usedocol family 2ard init
SMSC: tx_fif_sz = 0x00050000
--------------------------
SMSC: afc_cfg = 0xFFFFFFFF, driver will decide entries: 512 (order: -1, 2048 bytes)
SMSC: tasklets = 0, Tasklets disabled
SMSC: phy_addr = 0xFFFFFFFF, Use internal phyd registered7100 version 3.xclock =
SMSC: max_throughput = 0xFFFFFFFF, Use platform default1P established hash table entri
io
ab
SMSC: burst_period = 0xFFFFFFFF, Use platform defaulton (null) failed: Success
SMSC: max_work_load = 0xFFFFFFFF, Use platform defaultubm a
/etc/rcS.d/S200mountfs: /etc/rcS.d/S2
SMSC: -->Smsc911x_init(dev=0x846E45CC) Reared
SMSC: --> Platform_Initialize
s
NET
SMSC: Lan Base at 0xA2000000
io sch
d-only file
SMSC: <-- Platform_Initializeount: Can't find / in /etc/fs
SMSC: dwLanBase=0xA2000000rcable en
SMSC: LAN9115 identified, dwIdRev==0x01150002
: Success (order:
mount: Mou
SMSC: FPGA_REV == 0x00000000ss
SMSC: <--Smsc911x_init(), result=0
ata1: SATA link down (SStatus 0)=stb7100ref_27
scsi0 : sata_stm driver initiali
Generic ST boards onboard flash device: 0x01000000 (16.0Mb) at 0x00000000
PARAM : bootdelay=1
Onboard_Flash: Found 1 x16 devices at 0x0 in 16-bit bank
PARAM : bootargs=co
Onboard_Flash: Found 1 x16 devices at 0x800000 in 16-bit bank3] = s_env_mac[4] = ÿ
Amd/Fujitsu Extended Query Table at 0x0040
600 coprocessor_mem=2m@0
Onboard_Flash: CFI does not contain boot bank location. Assuming top.
s_env_mac[5]
s_env_mac[12] = 96K

LMI_SYS SDRA0 = 08001900
LMI_SYS SD
0x00020000-0x00040000 : "BootConfiguration 0xA002.0000-0xA003.FFFF"= 00000249
LMI_SYS CIC = 00000249
ST40_start_host_control6455
ST40_start_host_control proceeding
LMI_VID SDRA0 = 1400
ST40-ehci ST40-ehci.2: ST EHCI Host Controller001900
LMI_VID CIC = 0
ST40-ehci ST40-ehci.2: new USB bus registered, assigned bus number 1
LMI_VID SDMR1 = 00000000
VFD_Drive
ST40-ehci ST40-ehci.2: irq 169, io mem 0xb91ffe00
VFD PIO Already Opened
ST40-ehci ST40-ehci.2: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004er Type : NEW Kathrein VFD

CMDLINE = console=ttyA
usbcore: registered new driver usb-storageysarea=2600 cop
USB Mass Storage support registered.
rocessor_mem=2m@0x0
usbcore: registered new driver libusual

cannot fine test
pegasus: v0.6.13 (2005/11/13), Pegasus/Pegasus II USB Ethernet driver


Board: STb7100-mboard
usb 1-1: new high speed USB device using ST4p1) (Feb

#
usbcore: registered new driver zaurus
Image Na
mice: PS/2 mouse device common for all mice Image Type: SH-4 Linux Kernel Image (gzi
i2c /dev entries driver
stssc layer initialized
Data Size: 17146
STMicroelectronics - Coprocessors st231 Init
Load Address: 84401000
st231-0 Coprocessor ------------------------------------
Verifying Checksu

Linux version 2.6.17.14_stm22_0037 (kdhong@linux.loca
st231-1 Coprocessor -------------------------------------------
(STMicroelectronic
flags 0001 RAM start at 0xa4200000 size 0x00200000
cop. addr 0x04200000tronics STb7100 Reference board initia
Channels : Not defined
IRQ : not usedsion 3.x
---------------------------------------------------------------sole=ttyAS0,115200 root=/dev/mtdblock3 mem=4
TCP bic registered
/etc/init.d/rcS running...

Remounting root file system in read-write mode...mount: Can't find / in /etc/fst
S
Using tmu for system timer
ab
: Success
Dent
mount: Mounting / on (null) failed: Success 32768 bytes)40-ehci.2: USB 0.0 started, EH
[FAILED]driver 1
/etc/rcS.d/S200mountfs: /etc/rcS.d/S200mountfs: 91: cannot create /etc/mtab: Rea
Inode-cache hash table e
d-only file system: 2, 16384 bytes)
mount: Can't find / in /etc/fstab

: Success


BusyBox v1.1.0 (2006.03.02-09:48+0000) Built-in shell (ash)2 n_sets
D-cache : n_ways=2 n_sets
Enter 'help' for a list of built-in commands.
usb usb1: configuration #

config/start.sh does not exist.... running /app/start.shias_mask=0x00003000 n_aliases=4
PARAM : boot_param_version=20
hub 1-0:1.0: USB h

PARAM : board=stb7100ref_27
usb 1-1:
Moun
PARAM : bootcmd=bootm a0040000
PARAM : bootdelay=1 port detected
PARAM : ethaddr=00:50:fd:ff:12:340x

u
NET: Registere
PARAM : bootargs=console=ttyAS0,115200 root=
Initializing USB
h
UFS-910 found
mknod: /dev/vfd: File existstries: 512 (order: -1, 2048
vfd_driver_new: module license 'Marusys' taints kernel.
usbcore: registered new d
tmp_pin = 84753548ished hash table e
VFD_Driver Initder: 1, 8192 by
VFD_Controller Type : NEW Kathrein VFD
UFS910 Button Device Driver(by Marusys Co.)dr 0x04200000Remo

SysConf device InitC plugin has IRQ 12
LMI_SYS VCR0 = 00d40000
Lirc
LMI_SYS VCR1 = 0f041000
ST
LMI_SYS MIM0 = 057c025fiver configured/fst
LMI_SYS MIM1 = 00000005
STPIO
LMI_SYS SCR = 00000000
LMI_VID VCR0 = 00d40000
LMI_VID VCR1 = 17101000root
LMI_VID STR = 35b06455
LMI_VID COC = 00000000
LMI_VID SDRA0 = 14001900
LMI_VID SDRA1 = 14001900
LMI_VID CIC = 00000249
LMI_VID SDMR0 = 00000000
LMI_VID SDMR1 = 00000000
VFD_Driver Init
VFD PIO Already Opened
VFD PIO Already Opened
VFD PIO Already Opened
VFD_Controller Type : NEW Kathrein VFD
TestModMgr::CheckTestMode CmdLine = console=ttyAS0,115200 root=/dev/mtdblock3 me
m=41m bigphysarea=2600 coprocessor_mem=2m@0x04000000,2m@0x04200000

CMDLINE = console=ttyAS0,115200 root=/dev/mtdblock3 mem=41m bigphysarea=2600 cop
rocessor_mem=2m@0x04000000,2m@0x04200000

CMDLINE = console=ttyAS0,115200 root=/dev/mtdblock3 mem=41m bigphysarea=2600 cop
rocessor_mem=2m@0x04000000,2m@0x04200000

cannot fine test mode
TestModeMgr::CheckMode : TestMode Disabled

Läuft wieder danke an alle.

@sand04

Vielleicht mal kurz die Lösung erklären. Dann kann vielleicht anderen Usern mit dem selben Problem geholfen werden.

Mit der in Post 10 beschriebene Methode.