µMC V1.09 und P. NDS V13 funzt nicht :-(

Hallo Leute,

so langsam bin ich am verzweifeln. Bekomme meine originale Pre. Karte V13 einfach nicht zum Laufen.

Sagem DBox2
µMC: V1.09
Keyweltimage Okober
scam und CCcam aus Sorglospaket und alles nach Anleitung installiert

Hier meine newcs.xml:

Code:

---

<newCSconfig>
        <readers name="DBox2">
                <device>
                       
                        <name>Multicam</name>

                       
                        <type>dbox</type>

                       
                        <mhz>357</mhz>

                       
                        <node>/dev/tts/1</node>

                       
                        <parity>odd</parity>

                       
                        <reset>hard</reset>

                       
                        <export>Yes</export>

                       
                        <enabled>Yes</enabled>

                       
                        <blocksa>No</blocksa>

                       
                        <blockua>No</blockua>

                       
                        <blockga>No</blockga>

                       
                        <boxkey>00000000</boxkey>

                       
                        <irdeto-camkey>0000000000000000</irdeto-camkey>

                       
                        <irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>

                       
                        <crypto-special>No</crypto-special>

                       
                        <ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>

                       
                        <ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>

                       
                        <PTShandshake>No</PTShandshake>

                       
                        <****detect>yes</****detect>

                       
                        <newcamd_port>34001</newcamd_port>

                       
                        <autosid>Yes</autosid>

                       
                        <Seca-PPV>no</Seca-PPV>

                       
                        <priority>round</priority>
                </device>
        </readers>
        <cache>
                       
                        <emm>20</emm>

                       
                        <ecm>-1</ecm>
        </cache>
        <debug>
                       
                        <mode>simple</mode>

                       
                        <level>normal</level>

                       
                        <type>init</type>

                       
                        <output>console,tcp</output>

                       
                        <console_options>normal,init</console_options>

                       
                        <tcp_port>10001</tcp_port>

                       
                        <tcp_options>normal,init</tcp_options>
        </debug>
        <newcamdserver>
                       
                        <enabled>Yes</enabled>

                       
                        <name>newcs</name>

                       
                        <deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>

                       
                        <user><status>access</status>
                               
                                <name>newcs1</name>

                               
                                <password>newcs</password>

                               
                                <hostname>192.168.1.8</hostname>

                               
                                <au>on</au>

                               
                                <sidoverride>off</sidoverride>

                               
                                <spider>off</spider>

                               
                                <rate>2</rate>
                        </user>
        </newcamdserver>
        <httpd>
<server>
<port>8088</port>
<enabled>yes</enabled>
</server>
<user>
<name>Admin</name>
<password>0815</password>
<accesslevel>admin</accesslevel>
</user></httpd></newCSconfig>

---

und meine CCcam.cfg:

Code:

---


N: 192.168.1.8 34001 newcs1 newcs 01 02 03 04 05 06 07 08 09 10 11 12 13 14

SERIAL READER : /dev/tts/1

SMART**** CLOCK FREQUENCY: /dev/tts/1 3570000

---

Und nun der Log, den ich in Telnet angezeigt bekomme. Die Karte steckt zu diesem Zeitpunkt noch nicht im Slot2.

Code:

---


have fun with KEYWELT on your Sagem D-BOX2 - Kernel 2.4.36.6-dbox2 (02:19:46)...
dbox login: root


BusyBox v1.7.2 (2008-10-30 00:59:12 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.

/var # killall -9 newcs
/var # newcs
This is NewCS 1.62 - the New ****Server by the Butter-team..
Compiled on Aug 27 2008 at 16:49:31
Reading Config file from /var/tuxbox/config/newcs.xml
TCP-log password is disabled!
level: normal
type: init
output: console,tcp
logger config: level 1 type 3 output 5
Console log options: level 1 type 3
TCP log options: level 1 type 3
[ 02:20:14 ] [ Box detect ] Box type 4 (Dbox2)
[ 02:20:14 ] [ Config ] Option <blockc0> for device 0 (Multicam) not present, defaulting to N
[ 02:20:14 ] [ Config ] Value in <ipk> for device 0 (Multicam) is INVALID, skipping...
[ 02:20:14 ] [ Config ] Value in <ucpk> for device 0 (Multicam) is INVALID, skipping...
[ 02:20:14 ] [ Config ] /dev/tts/1 ECM priority: round
[ 02:20:14 ] [ httpd ] httpd-user: Admin, password: 0815, accesslevel: admin
[ 02:20:14 ] [ EMM Cache ] Initialising dynamic Cache
[ 02:20:14 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 515
[ 02:20:15 ] [ Loader ] Starting Telnet on port 10001
[ 02:20:15 ] [ Loader ] Started HTTP-server on port: 8088
[ 02:20:15 ] [ Loader ] Reader type 4 on node /dev/tts/1
[ 02:20:15 ] [ Dbox ] Opening device /dev/tts/1
[ 02:20:16 ] [ Loader ] Reset failed ...
[ 02:20:16 ] [ Loader ] Starting Newcamd Server on port 34001
[ 02:20:16 ] [ NewCS ] Ready to GO! :)
/var # [ 02:20:16 ] [ Newcamd ] Newcamd thread Server started on port 34001
[ 02:20:16 ] [ Loader ] Reader type 4 on node /dev/tts/1
[ 02:20:16 ] [ Dbox ] Opening device /dev/tts/1
[ 02:20:17 ] [ Loader ] Reset failed ...
[ 02:20:17 ] [ Loader ] Reader type 4 on node /dev/tts/1
[ 02:20:17 ] [ Dbox ] Opening device /dev/tts/1
[ 02:20:18 ] [ Loader ] Reset failed ...
[ 02:20:18 ] [ Loader ] Reader type 4 on node /dev/tts/1
[ 02:20:18 ] [ Dbox ] Opening device /dev/tts/1
[ 02:20:19 ] [ Loader ] Reset failed ...
[ 02:20:19 ] [ Loader ] Reader type 4 on node /dev/tts/1
[ 02:20:19 ] [ Dbox ] Opening device /dev/tts/1
[ 02:20:20 ] [ Loader ] Reset failed ...
[ 02:20:20 ] [ Loader ] Reader type 4 on node /dev/tts/1
[ 02:20:20 ] [ Dbox ] Opening device /dev/tts/1
[ 02:20:21 ] [ Loader ] Reset failed ...
[ 02:20:21 ] [ Loader ] Reader type 4 on node /dev/tts/1
[ 02:20:21 ] [ Dbox ] Opening device /dev/tts/1
[ 02:20:22 ] [ Loader ] Reset failed ...
[ 02:20:22 ] [ Loader ] Reader type 4 on node /dev/tts/1
[ 02:20:22 ] [ Dbox ] Opening device /dev/tts/1
[ 02:20:23 ] [ Loader ] Reset failed ...

---

Das Ganze geht dann immer so weiter ....

Ein [ 02:20:16 ] [ NewCS ] Ready to GO! :) ist ja zu sehen

Weiß jemand vielleicht einen Rat?:durcheinander-ersta

newcs.xml

Code:

---

<?xml version="1.0"?>
<!--
For setup-issues, look in readme.txt!
If there are other troubles, try different forums or irc channels around :o)
The configfile are NOT case-sensitive, and shouldnt care about dos/unix cr/lf.
-->
<newCSconfig>
        <readers name="DBox2">
                <device>
                        <!-- valid value for name are:
                                Any name of your choice, just to name the device for you to read.        -->
                        <name>Multicam</name>
                        <!-- valid value for type are:
                                phoenix, dbox, sci, dragon, sc8, mp35, smartreader, pcsc (for own binary) or infinity(for own binary).        -->
                        <type>dbox</type>
                        <!-- valid value for mhz are:
                                153(1.53mhz), 358(3.58mhz), 368(3,68Mhz), 450(4.5mhz), 536(5.36mhz), 600(6.00mhz), 715(7.15 mhz), 800(8.00mhz)
                                1000(10.00 mhz), 1071(10.71mhz), 1200 (12.00mhz), 1431(14.31 mhz), 1600 (16.00mhz)
                                This setting is now IMPORTANT, normal phoenix usually have 3.57mhz, and can usually be overclocked
                                to 6mhz. For the others you probably need extra crystal (be careful).        -->
                        <mhz>357</mhz>
                        <!-- valid value for node are full path to device, f.ex /dev/tts/0,
                                /dev/sciX (for dreambox), /dev/****readerX (for dragon),
                                /dev/tts/USBX (for a usb2serial device).
                                COMx on Win32, COM1, COM2 etc.
                                For PC/SC this is just 0, 1 ,2 and so on (reader number)        -->
                        <node>/dev/tts/1</node>
                        <!-- valid value for parity are:
                                Odd, Even, None (ignored on sci and dragon).
                                This is only used on serial _BEFORE_ ATR is recieved.        -->
                        <parity>odd</parity>
                        <!-- valid value for reset are:
                                normal, inverse (ignored on sci and dragon).
                                normal is phoenix, inverse is smartmouse        -->
                        <reset>normal</reset>
                        <!-- valid value for export are:
                                Yes,No - if not exported only localhost can connect.        -->
                        <export>Yes</export>
                        <!-- valid value for enabled are:
                                Yes,No - if not enabled it cant be used.        -->
                        <enabled>Yes</enabled>
                        <!-- valid value for blocksa are:
                                Yes, No - block shared address emm to ****.        -->
                        <blocksa>No</blocksa>
                        <!-- valid value for blockua are:
                                Yes, No - block unique address emm to ****.        -->
                        <blockua>No</blockua>
                        <!-- valid value for blockga are:
                                Yes, No - block group address emm to ****.        -->
                        <blockga>No</blockga>
                        <!-- valid value for boxkey are:
                                The boxkey/boxid of your nagra/nds STB.        -->
                        <boxkey>00000000</boxkey>
                        <!-- valid value for irdeto-camkey are:
                            8byte hex.        -->
                        <irdeto-camkey>0000000000000000</irdeto-camkey>
                        <!-- valid value for camkey-data are:
                            64byte hex        -->
                        <irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>
                        <!-- valid value for crypto-special are:
                                Yes, No - Used to enable/disable real-time mosc on Cryptoworks.        -->
                        <crypto-special>No</crypto-special>
                        <!-- valid value for ipk are:
                            64byte hex        -->
                        <ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>
                        <!-- valid value for ucpk are:
                            64byte hex        -->
                        <ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>
                        <!-- valid value for PTShanshake are:
                            Yes, No - Used to enable/disable real-time HighBaud on Cryptoworks and Viacess.        -->
                        <PTShandshake>No</PTShandshake>
                        <!-- valid value for ****detect are:
                                Yes, No - Used to try to detect if **** is present in you ****reader.        -->
                        <****detect>yes</****detect>
                        <!-- valid value for newcamd_port are:
                                0,65535 - Which port newcamd server will listen for incomming connections. -->
                        <newcamd_port>10000</newcamd_port>
                        <!-- valid value for autosid are:
                                Yes, No - Let NewCS decide which sids should be allowed/denied based on **** answers. -->
                        <autosid>Yes</autosid>
                        <!-- valid value for Seca-PPV are:
                                Yes, No - Let NewCS decide which sids should be allowed/denied based on **** answers. -->
                        <Seca-PPV>no</Seca-PPV>
                        <!-- valid value for Pincode are:
                                0000, 9999 - For f.ex PPV on Conax, also for parental lock on conax and cryptoworks. -->
                        <pincode>0000</pincode>
                        <!-- valid value for priority are:
                        hard, round, fifo - hard is lower userid, higher priority(gets ECM through before user with higher id),
                        round, there is an equal chance for all users to get ECM through, fifo, first sendt ECM gets through.        -->
                        <priority>round</priority>
                </device>
        </readers>
        <cache>
                        <!-- valid value for emm are:
                                0-255 - Number of EMM's to cache.        -->
                        <emm>20</emm>
                        <!-- valid value for ecm are:
                                0-255 - Number of ECM's to cache.
                                -1    - Dynamic ECM Cache.        -->
                        <ecm>-1</ecm>
        </cache>
        <debug>
                        <!-- valid value for mode:
                            simple, advanced - Set TCP-Console to advanced mode to get access to
                            potentially dangerous features.-->
                        <mode>simple</mode>
                        <!-- valid value for level are:
                                    normal, verbose, spam - How extensive debug should be.        -->
                        <level>normal</level>
                        <!-- valid value for type are:
                                Init, general, ecm, emm, net, all - Section of debug that should be displayed.        -->
                        <type>init</type>
                        <!-- valid value for output are:
                                Console, udp, tcp, file, all - Where to show debug.        -->
                        <output>console,tcp</output>
                        <!-- console_options are so you can set own loglevel/type for console-logger:
                                Should hold level and type-tags like above.        -->
                        <console_options>normal,init</console_options>
                        <!-- valid value for tcp_port are:
                                0,65535 - Which port to listen for incomming tcp connections.        -->
                        <tcp_port>1001</tcp_port>
                        <!-- tcp_options are so you can set own loglevel/type for tcp-logger:
                                Should hold level and type-tags like above.        -->
                        <tcp_options>normal,init</tcp_options>
        </debug>
        <newcamdserver>
                        <!-- valid value for enabled are:
                                Yes, No - Enable or Disable newcamd server.        -->
                        <enabled>Yes</enabled>
                        <!-- valid value for name are:
                                Any name - Used to identify server to remote clients,
                                if the remote client isnt newcamd, this field have no purpouse.        -->
                        <name>newcs</name>
                        <!-- valid value for deskey are:
                                any 14x2 numbers  - Used to encrypt the communication between
                                the client and the server.        -->
                        <deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
                        <!-- Notes about users:
                                The first user doesnt have au without beeing it set to on (unlike newcamd ****server).
                                You can add as many user-sections as you want, just put them under eachother.        -->
                        <user>
                                <!-- valid value for userfile are:
                                        Any username you'd like - Used for client to logon (its case sensitive).        -->
                                <name>newcs</name>
                                <!-- valid value for password are:
                                    Any password you'd like - Used for client to logon (its case sensitive).        -->
                                <password>password</password>
                                <!-- valid value for hostname are:
                                          IP-address or DNS-name - Used for reverse login to the client.        -->
                                <hostname>localhost</hostname>
                                <!-- valid value for au are:
                                        On,Off - Wheather the client are allowed to send EMM to the server.        -->
                                <au>on</au>
                                <!-- valid value for sidoverride are:
                                    On,Off - Wheather the client are allowed to override the SID-filter.        -->
                                <sidoverride>off</sidoverride>
                                <!-- valid value for spider are:
                                        Yes,No - Wheather the client are allowed to be newcamd ****spider.        -->
                                <spider>No</spider>
                                <!-- valid value for rate are:
                                        1-60 - number of seconds between each ecm    -->
                                <rate>2</rate>
                        </user>
        </newcamdserver>
</newCSconfig>

---

CCcam.cfg

Code:

---

# CCcam team uvadi CCcam v1.2.1
#
# Special greets go to Dale Cooper, the RuDream and ofcourse HDLteam
#
# For system without new enigma socket.... capmtserver is your friend ;-)
#
######################################################################
# friends                                                            #
######################################################################
# syntax for to add a friend user to CCcam with the max up hops limit
# sharing of emus (default = 1), allow emm (default = 1), and optional
# downshare limits per share (default = no limits)
# emus are shared only one level down, even if no limits given
#
#F: <username> <password> <uphops> <shareemus> <allowemm> ( { caid:id(:downhops), caid:id(:downhops),... } )
#
# example:
#
# F: user1 pass1 10
#
# user1 gets all our shares at max 10 hops from us
# (our local ****s + max ten hops away). He can share down to his own
# clients. He also receive emu shares (if he has 'yes' behind his C: entry),
# and is allowed to send us emm.
#
# F: user2 pass2 0 1 0 { 0100:000080, 0622:000000:1, 0500:000000:2 }
#
# user2 gets only our local ****s but no 0100:000080.
# and our 0622:000000 ****s only for himself (1 hop down),
# and 0500 ****s for himself plus one additional hop down.
# He also gets our emus, and is NOT allowed to send us emm (updates).
#
# F: user3 pass3 5 0 1 { 0:0:3, 0100:000080:1 }
#
# user3 gets all ****s at a maximum of 5 hops away from us,
# and get's to share them down two further levels beyond his own level.
# But he is not allowed to share 0100:000080 down to other users.
# He gets no emus from us, and he is allowed to send us emm.
######################################################################
# connections                                                        #
######################################################################
# syntax for to add a client connection to other CCcam
# add yes on end to use friends emus (non public private key/emu,etc...),
# but only works when corresponding F line on server has '1' for <shareemus>
#
#C: <hostname> <port> <username> <password> <wantemus>
#
# example:
#
# C: someserver.somedomain 12000 user1 pass1
# C: 192.168.1.2 12000 user2 pass2
# connects to CCcam without use of friends emus
#
# C: 192.168.1.2 12000 user3 pass3 yes
# connects to CCcam, and receives friends emus also.
# syntax for to add newcamd server connection
#
#N: <ip> <port> <username> <pass> <des(14byte)> <nr_of_hops_away (default: 1)>
#
# example:
#
# N: 127.0.0.1 10000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
N: 127.0.0.1 10000 newcs password 01 02 03 04 05 06 07 08 09 10 11 12 13 14
# syntax for to add radegast server connection
#
#R: <ip> <port> <ca4> <id6> <nr_of_hops_away (default: 1)>
#
# example:
#
# R: 127.0.0.1 678 0100 000080
# syntax for to add camd3 connection
#
#L: <ip> <port> <username> <pass> <ca4> <id6> <nr_of_hops_away (default: 1)>
#
# example:
#
# L: 127.0.0.1 567 dummy dummy 0100 000080
######################################################################
# Other config settings                                              #
######################################################################
# server shall listen on this port pro incoming connections
# default port is 12000, disable server with parm -s
#
#SERVER LISTEN PORT : 12000
# server can give some info about server and client connections
# and ****info
# default port is 16000
# supported commands:
#        info
#        activeclients
#        clients
#        servers
#        shares
#        providers
#        entitlements
# example use: echo servers | telnet localhost 16000
#
#INFO LISTEN PORT : 16000
# same info also available in your browser
# go with your browser to http://ip_CCcam_server:16001
#HTML INFO LISTEN PORT : 16001
####################################
# DEPRECATED                      #
# will be removed in next release  #
# use shell/web interface above    #
####################################
# some listening tcp port for info:
# all ports below will be gone in next release
# start using command interface in your scripts
#
# **** info
# **** INFO PORT : 14000
# online clients
# ONLINE CLIENTS PORT : 15000
# online clients
# ONLINE ACTIVE CLIENTS PORT : 15004
# online connections
# ONLINE CONNECTIONS PORT : 15001
# online shares
# ONLINE SHARES PORT : 15002
# supported providers in shares
# ONLINE PROVIDERS PORT : 15003
####################################
# END DEPRECATED                  #
####################################
# time in seconds to keep On Screen Display active.
# default is 0 (turned off)
#
#ZAP OSD TIME : 3
# Serial path to phoenix reader. Add as many as you have attached too your system
# default is none
# optionally add readertype : phoenix,mouse,uniprog
# (when non readertype given defaults to uniprog (e.g. for mastera))
#
#      Phoenix Reader Path : <device> <type>
#
# example
#
#PHOENIX READER PATH : /dev/tts/0
# if timing should be shown in OSD and debug output
# default is no (turned off)
#
#SHOW TIMING : yes
# turns debugging on and off
# default is no (turned off)
#
#DEBUG : yes
# should CCcam try to read and parse newcamd.conf for server connections
# default is no (turned off)
#
#NEWCAMD CONF : yes
# configure what EMM blocker you want. Add as many as readers you have attached
# default is blocking nothing
#
# B: /dev/sci0 01
#      00 - nothing
#      01 - sa blocked
#      02 - ua blocked
#      04 - ga blocked
#      and sum of for combinations
#
#examples
#
#B: /dev/tts/0 07
#B: /dev/sci0 01
# disable all local EMM readers
# saves lots of CPU, but you won't get any updates anymore
# (unless you get updates from your clients)
#
# default: no
#
#DISABLE EMM : yes
# overrule the nds boxkey (4 byte hex)
#
# BOXKEY: <device> <byte1> <byte2> <byte3> <byte4>
#
#example
#
#BOXKEY: /dev/sci0 00 11 22 33
# what Softcam.Key should CCcam try to read
# defaults to /var/keys/SoftCam.Key
#
#SOFTKEY FILE : /var/keys/SoftCam.Key
# what AutoRoll.Key should CCcam try to read
# defaults to /var/keys/AutoRoll.Key
#
#AUTOROLL FILE : /var/keys/AutoRoll.Key
# what constant.cw should CCcam try to read
# defaults to /var/keys/constant.cw
# file content can be like
#
# ca4:id6:sid4:pmtpid4:ecmpid4:key16(01 02 03...)
#
#STATIC CW FILE : /var/keys/constant.cw
# in this file you can configure what CAIDs CCcam should ignore
# defaults to /var/keys/CCcam.ignore
# file content can be like
#
# I: ca4 id6                ignore allways this caid/ident
# S: ca4 id6 sid4        ignore caid/ident only on sid
#
#CAID IGNORE FILE : /var/keys/CCcam.ignore
# write wrong logins to file
# defaults is off
#
#LOG WARNINGS : /tmp/warnings.txt
# stealthy login to newcamd/newcs server, identify as mgcamd
# default: no
#
#NEWCAMD STEALTH : yes
SMART**** CLOCK FREQUENCY: /dev/sci0 3570000

---

Erst NewCS aktivieren zum Schluss noch CCcam und schon sollte es hell werden.

Hallo,

funktioniert leider auch nicht.Nichts zu machen irgendwie ...

Ich habe in der CCcam.cfg auch schon folgendes ausprobiert:

#SMART**** CLOCK FREQUENCY: /dev/sci0 3570000
#SMART**** CLOCK FREQUENCY: /dev/sci0 3570000
SMART**** CLOCK FREQUENCY: /dev/tts/1 3570000

Bringt leider auch keinen Erfolg.

Code:

---

BusyBox v1.7.2 (2008-10-30 00:59:12 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.

/var # killall -9 newcs
/var # newcs
This is NewCS 1.62 - the New ****Server by the Butter-team..
Compiled on Aug 27 2008 at 16:49:31
Reading Config file from /var/tuxbox/config/newcs.xml
[ 17:18:05 ] [ Box detect ] Box type 4 (Dbox2)
[ 17:18:05 ] [ Config ] Option <newcamd_port> for device 0 (Multicam) not present, defaulting to 150
50
[ 17:18:05 ] [ Config ] Option <****detect> for device 0 (Multicam) not present, defaulting to NO
[ 17:18:05 ] [ Config ] Option <blockc0> for device 0 (Multicam) not present, defaulting to NO
[ 17:18:05 ] [ Config ] Option <Seca-PPV> for device 0 (Multicam) not present, defaulting to NO
[ 17:18:05 ] [ Config ] Value in <ipk> for device 0 (Multicam) is INVALID, skipping...
[ 17:18:05 ] [ Config ] Value in <ucpk> for device 0 (Multicam) is INVALID, skipping...
[ 17:18:05 ] [ Config ] Option <cache> not present, defaulting EMM: 20, ECM: Dynamic
[ NewCS ] Process ID is: 521
[ 17:18:06 ] [ NewCS ] Ready to GO! :)

---

Und nu ???

das NG² mit Firmware 1.09 macht Probleme und kann die Karten nicht sauber erkennen.
Viele Leute haben dieses Problem.
Dagegen läuft es tadellos mit Firmware 2.51
Manch andere MCs in der DB2 machen ähnliche Probleme.
Teste mal versuchsweise einen externen ****reader, wenn zur Hand

Habe das NG2 mal durch ein µMC getauscht.

Funktioniert auch nicht.

Dann kaufe ich mir einfach ein neues MC.

Hat vielleicht jemand eine Empfehlung, bevor ich mir hier einen Wolf suche und es zum Schluß nur an der Hardware liegt.

Gruß

Habe gerade noch mal in meiner Wunderkiste gekramt und habe noch einen

MASTERCRD Junior gefunden.

Mit was für einer Spannung läuft der denn, und mit was für einer Leitung verbinde ich DBOX und MASTERCRD?

Gruß

Junior?
Kenne ich nicht, wenn er einen Comanschluß hat, halt dort anschließen mit seriellem Kabel.
Spannung sollte auf der Platine stehen, gleich neben dem Anschluß, und auch ob Minus innen oder außen ist.
Der Junior muss 6MHZ können, mal googeln danach.
Habe noch etwas gefunden:
Der kleine Bruder des MasterCRDs.
Der passive Universal-Programmer mit 3 Emulationen. Im formschönen Gehäuse.
1. Mouse-Modus mit 6 und 3,5 MHz Takt.
4. SPI-Modus zur Programmieung von AVR Controllern (Jupiter1&2, Fun**** usw.)
Modus Wahl durch 1 Taster.
Anzeige durch 7 Segment-Display.
4,5-6Volt bekommt er

Mmhhh ...

6 Mhz ???

Ich denke die NDS-Karte benötigen 3,57 Mhz.

6 und 3,57MHZ kann der Junior, also passts.
und ja, für Deine NDS braucht es 3,57MHZ, aber einige lassen die Karte mit mehr MHZ laufen, weil die mit 3,57MHZ sehr träge ist.

Wie genau spreche ich denn nun den externen ****reader am com-port an?

dev/tts/0 ???

Jetzt brauche ich erstmal ein Null-Modemkabel. Habe ich nicht da? Mist !

Welches MC könnt Ihr denn empfehlen, mit dem die NDS problemlos läuft?

Sollte so aussehen:

Zitat:

---

SLOT=dev/tts/0: 1 :1 :1 :1 :997:mastercrd:password

---

Empfehlen kann ich dir das MC3 oder das AHAB2

Moin,

gilt dieser Eintrag auch für newcs mit CCcam?

Kann mir jemand vielleicht auch einen USB-Leser empfehlen?

Habe gelesen, dass es auch eine Möglichkeit über meine Fritzbox 7270 gibt.

Wäre super ...

Newcs ist völlig anders. Welche Box hast Du?
Es geht auch über Fritzbox mit Freetz Image aber das ist wesentlich komplizierter.

Habe eine DBOX2 von Sagem.

Das Thema mit der Fritzbox interessiert mich auch brennend.

Habe auf meiner Fritzbox schon einen Asterisk zum Laufen bekommen.

Wenn Du Infos zum Thema Fritzbox hast wäre ich sehr dankbar.

Denn ... der Winter wird lang ...

Die DBox hat aber keinen USB anschluß bzgl. ****reader.
Bei der Fritzbox kann ich dir nicht helfen aber google kanns